Bridging Thomson Speedtouch To Belkin N Series Modem Router?

Nov 8, 2011

Five months ago we moved into a new apartment, and connected up our broadband; the ISP provides a Thomson Speedtouch modem (ST546 v6), which I understand from Tech Support is running software v4 (it was issued with V5, but rolled back to V4 for stability issues).We prefer a WiFi network, so purchased a Belkin N Wireless Modem Router (F5D8636-4 v2); I connected it up ditching the ISP issued modem, and all worked well for four months. Suddenly it refused to see the ADSL connection - orange light flashing.So after four nights of 'fault resolution' with Belkin, they decided to send me a replacement... which I finally received last night. It didn't work - same problem, flashing orange light.I have the correct user name and password for the ISP - checked it not once, not twice, but four times. The Thomson Speedtouch works, but doesn't provide a WiFi environment. Can I connect the Belkin modem router into the back of the Thomson and transmitt/carry the WiFi signal that way, and if so, how? I tried (the obvious to me) plug a ethernet cable from the Thomson modem into the Belkin, but nothing.. I'm guessing there are a few important steps I missed.

View 3 Replies


ADVERTISEMENT

Connecting A Thomson Speedtouch Wireless Router To A PS3?

Apr 24, 2011

I currently have a Thomson speedtouch router that i have yet to connect to my pc as i am waiting for the adaptor for it.I use AOL adsl line aol have goiven me instructions to connect the router to my PS3 either wireless or ethernet cable.I go through all the instructins but when i finally check connection it finds ip address but the internet connection has failed ie timed out 80028E02?

View 1 Replies View Related

Connecting A Thomson Speedtouch ST585 Router To A Network (dd-wrt)?

Jul 14, 2012

I have a thomson speedtouch ST585 router hooked up to my DSL line. I am trying to replace the wifi AP of the thomson with my linksys router (running dd-wrt). So far I have connected the linksys router (from the internet port) to the thomson router, and turned the thomson's wifi off. But, now I can't connect to the internet though the linksys router...I have tried disabling DHCP with no success?

Update:I can now connect to the internet through the linksys router, the problem now is that I cannot access the linksys's routers setup page. I can access the speedtouch's though.[URL] I would like to be able to manage all the forwarding (and the ip's) though the linksys router NOT the thomson (I want to make the linksys router the core router). I just need the thomson for my DSL line, I don't want it to do anything else but provide internet to the linksys router.

View 7 Replies View Related

Linksys Wired Router :: Thomson SpeedTouch Chained To Cisco 861

Oct 11, 2011

I'm trying to create a VPN through a Cisco 861 but the problem is that the ISP forces me to use a SpeedTouch gateway ( as they use the MAC address for the authentication).By now, i'm getting OK pinging from client to 192.168.254.1, but I can't reach Internet.If I connect the client directly to the Speedtouch internet works properly. [code]

View 1 Replies View Related

Thomson Speedtouch Routers Internet Connection Keeps Going Down

Aug 12, 2011

I've noticed recently that my laptop keeps disconnecting from the internet via my router (Thompson Speedtouch ST585v6sl.)The light on the router that shows the connection turns red or sometimes it doesnt light up. However all the other lights stay on, it's just the internet light.It only happens for around 5-10 minutes and then after troubleshooting, disconnecting and reconnecting it's back up.I've scanned my computer for viruses and malware and nothing has come up, this is happening reguarly now about every 30-45 minutes when i'm on my pc.

View 3 Replies View Related

Replace Speedtouch 330 Modem With Netgear Router Dgnd3700?

Dec 16, 2012

install a new N600 Wireless Dual Band Gigabit ADSL2+ Modem Router - Model DGND3700, to replace a Thompson Speedtouch USB Modem.

PC Windows XP Home Premium Media addition - Main PC X2 Laptops Win7 & Vista - fully working on wireless no issues.

I have managed to get two laptops working wirelessly with no problems, my main problem is the master pc needs to be able to use this router as well, but I cannot get it to work via the Ethernet cable!! I can get to to the Routers config page, I have done the following:

unplugged and removed the speedtouch modem, the old dial up connection is still available on the pc along with the speedtouch software and driver, I left this in place just in case the pc needs to revert back to the speedtouch modem, if I am unable to resolve this issue.

I have set the ip address on the PC to static and input the relavent Subnet and Gateway I can ping the Routers address 192.168.0.1 even though I have reserved the PC's Mac address and IP Adress I am unable to get to the internet. I have tried setting up a new internet connection via windows wizard.

when i look into the nework connections section in windows the local area connection is 100mb and there seems to be another connection which looks like another internet connection this indicates I am connected however I still cannot get an actual google session running.

View 1 Replies View Related

Speedtouch Modem Doesn't Provide Gateway Address To Router

Apr 4, 2012

My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.

View 2 Replies View Related

Linksys Wireless Router :: Connecting E1200 To Speedtouch 546 Modem?

Mar 6, 2012

My parents are using a speedtouch 546 modem for their wired internet connection, but they would like wireles in their home. I therefore bought them a linksys e1200, and tried to get their wireless internet working.
 
I connected the e1200 to the speedtouch via kabel, used the cisco software to install the wifi network, and so far so good. The laptop has no problem connecting to the e1200, but no internet connection, whatever I do.
 
There seems to be a signal comming into the back of the e1200, since the led on both the speedtouch and the e1200 are responding, indicating that the two are sharing some information.
 
Looking for information on the net, I came onto 3 possible solutions.
 
One is cloning the MAC adress of the to the speedtouch connected wired computer to the e1200. The second has something to do with interfering IP adress ranges. The third was uninstalling the cisco software, reconnecting and resetting the modem. Let windows find the hardware and just install the e1200 drivers.

View 2 Replies View Related

A Thomson TG585 V7 :: How To Access Modem Router Behind Another

Feb 16, 2013

A Thomson TG585 v7 (Modem + WiFi Router) receiving a DSL connection and Providing internet access on two interfaces connection :
1- WiFi : to connect portable devices at my home.
2- 4 Ethernet ports : to connect my desktops.
One of these ports on my Thomson is connected to a D-link unmanaged switch to provide extended wired connections. From this unmanaged 4 ports switch one port is connected to my neighbors in another building through UTP, and connected to a D-link DIR 605-L WiFi router, the IP address of the DIR 605-L is 192.168.1.77 and the IP address of my local Thomson is 192.168.1.254 which means they are in the same network. I need to access the DIR 605-L WiFi router from my my home where I am connected directly to Thomson router through UTP cable, I am not able to do that !! , while also I can't even ping the DIR 605-L IP 192.168.1.77.

View 1 Replies View Related

Thomson Tg782 - Share USB Modem Internet Through Router?

Oct 3, 2012

I have a Thomson tg782, with a USB port on the side. I want to plug my sub modem internet into that usb port, and then share that connection over wifi, because the router has a wifi function.

View 4 Replies View Related

Thomson St-330 Modem - How To Change Global IP Address Without Restarting Router

Dec 4, 2012

I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???

View 2 Replies View Related

Setup A Canyon CN-FW514 Wireless Router Through A Thomson Modem

Feb 11, 2011

I'm trying to setup a Canyon CN-FW514 wireless router through a Thomson modem.When I first started trying, I could get up the set-up screen on [URL] however this is as far as I got; the laptop said it had a very strong signal with the wireless connection, but I could not get any web pages to open (windows explorer couldn't detect any problems either). The Thomson modem works when I conect it to the laptop via the ethernet cable, but that's not much use to me trying to use the internet elsewhere in the house!I tried changing the IP address, subnet mask and gateway IP address on the set-up screen [URL] which seems to have been a big mistake; I now can't even get the set-up screen to appear.I've reset the internet options and have set everything to obtain the IP address automatically but am still having no luck.

View 5 Replies View Related

Huge Lag In Call Of Duty 4 After Installing Thomson TG585v7 Modem Router?

Jun 6, 2011

So I used to use a Thomson TG585v7 modem router (wireless) as my means of connecting to the internet, the aerial cracked on it and I began getting dropped connections, so I went out and bought a D-Link DSL-2730B modem+router. I am hooked up wirelessly to the internet as there is no phone jack in my bedroom, and I experience massive and prolonged lag while playing call of duty 4 multiplayer, which I never had before with my old Thomson modem. My ping also shoots up to about 400 and then 999 while I teleport around the map.

View 3 Replies View Related

Hook Up A Motorola 2210 Modem And Linksys WRT120N Router Without Bridging?

Sep 28, 2011

I'm not that great at networking, I'm pretty much a novice but I'm trying to connect a modem and router to my computer but get around bridging the modem if possible. You see, I am working with AT&T and their dsl modem access page only works for me if the modem is unbridged. If I bridge the modem, I cannot get on the page again to unbridge it while I am trying to hook up my router. When I need them to unbridge the modem, I have to stay on hold for hours. One guy even told me that he did unbridge the modem, but since my internet persisted not to work, he told me my ethernet card went bad of a sudden on my computer. I knew this was incorrect so after a few more hours on hold, I had a lady debate with me that she was not unbridging my modem since it was my ethernet card that was bad and not the bridging. Finally, laughing to herself, she unbridged the modem for me and it worked

Here is what I have: My modem is a Motorola 2210 Style: MSTATEA My router is a Linksys WRT120N

As of right now, I just have a LAN with my modem plugged in through an ethernet cord to my PC. Is there a way of me hooking up my Linksys router to my modem and PC without bridging the modem? If so, where can I find out instructions for this?

View 2 Replies View Related

Home Network :: ARRIS TM822 - Bridging Cable Broadband Modem To Router

Feb 18, 2013

i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.

View 1 Replies View Related

Thomson TG782T Modem - Gateway Not Found?

Jul 3, 2012

I purchased a computer which has a GA-B75M-D3H motherboard in it.I have been attempting to connect it to the internet with little success. I have a Thomson TG782T modem hooked to the computer by ethernet cable. The computer does not recognise the modem and the modem does not find the gateway on the computer. I have discussed the problem with Telstra and as far as they are concerned its not their problem due to the cable showing green and amber light into the back of the computer and the modem is working. The computer guys are saying that the computer is fine as they utilised the net to load the computer.

View 1 Replies View Related

D-Link :: DIR 615 - Comcast Thomson Modem With VOIP

May 28, 2010

Life was great with my DIR-615 and Motorola Surf Board SB-5100 cable modem, but my D-Link refuses to recognize the Internet signal from the Thomson.  The Comcast guy spent an hour trying to get it to work, but I'm stuck watching MLB.tv on a 24" monitor in a stiff office chair in my study, instead of on a 47" LCD in my living room.  How can I force the DIR-615 to accept the Thomson ACG905?  If you advise me to check settings or manually change them, please do not "assume" that I know how to access those settings. 

View 6 Replies View Related

Routers / Switches :: Only One Task Available When Log Into Thomson TG585 V8 Modem

Apr 7, 2011

I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?

View 2 Replies View Related

Thomson ST516 V6 DSL Modem - Slow Browsing While Downloading

Nov 30, 2012

I am using a Thomson ST516 v6 DSL Modem, through which I have connected a Tenda W311R+ Wireless Router. There's two laptops, one running Windows 7 Sp1, the other running Windows Xp Sp3, and an Android based phone using this connection. I should mention that the problematic laptop had Windows 7 before switching to Xp and ran without any issues.

[code]....

View 12 Replies View Related

Thomson THG520 Modem Does Not Give IP Address On Both Links

Apr 14, 2011

My ISP gave me a Thomson THG520 modem when I subscribed to their service. It has 2 links and USB and an Ethernet link. It worked fine with our 2 computers but for several weeks or so I experiencing that it only gives me IP address only on one interface that one that's first plugged into the computer.

If I reset the modem and plug in the USB I get an IP address immediately. If I unplug the USB and plug in the Ethernet cable I don't get an IP address. If I reset again the modem and plug in the Ethernet cable I get an IP address but not on the USB link after I unplug the modem.

EDIT: after entering the modem's administration I realized it's firmware was updated (probably my ISP did it.). Also I read about how this stuff works, there is an evidence that my ISP set the CPE limit to 1. (so it seem only one computer connected to the modem can get IP address while the other can't.). And this configuration is stored on the modem somewhere. Is there a way to view it somehow?

View 1 Replies View Related

Connecting 2 Printers To Telstra Thomson (TG782T) ADSl Modem?

Feb 28, 2012

! have a TELSTRA ADSL wireless router ( Thomson TG782T)I need to connect my 2 printers to it so I can operate them wirelessly to my laptop and Desktop computers

Laptop: TOSHIBA Satellite w/- windows 7 Professional

Desktop: ASI Computer w/- Windows 7 Ultimate currently connected to ADSL modem by yellow network cable.

View 1 Replies View Related

Bridging Two Modem / Gateway's Into One Connection

Oct 16, 2011

We have telus firbe internet at this house. we have two connections each 25m-bit we've both got actiontech V1000H's. What im thinking is we hook each gateway up to a host pc (server) and go out from there to a switch (one line dedicated input, the other output as to not clog throughput), then from the switch out to two pc's in the house. phones xbox ect can use its own router(s) in theory would this work.

server specs
intel core 2 quad q8300 2.5 ghz
6 gb ddr2 800
2 tb hdd

all based on gigabit lan will have additional network cards added for now we're doing a simple data server, but we've been pondering on how to get two separate connections to work in unison?

View 1 Replies View Related

D-Link DIR-655 :: Bridging Using Isp Providers Modem

Jul 27, 2011

I have some network experience but not a lot so here is my problem.I have a zyxel q1000z from qwest that i want to bridge to my dir 655.I go through the settings to put their router/modem to bridge mode. This units default ip is the same as tslinkink, 192.168.0.1 so i change the d-link to 192.168.0.2. I then go into the D-link and enter my isp's pppoe settings and password. I reboot when i am done but can't connect to the internet.It shows connected but that's it. I want to use the d-link as the only router as the zyxel has very few settings and has slowed down my netflix.

View 2 Replies View Related

Belkin Routers :: Create Bridging Connection With F5d7230-4 V6000 As Repeater?

Mar 16, 2013

I am trying to use f5d7230-4 v6000 to connect my TV and Playstation to my home WLAN, but cannot set up the router to receive the signal from the base station (FRITZ!Box). Is it possible at all to use f5d7230-4 v6000 for such function?

View 2 Replies View Related

Adding PC To Mac DSL Connection Via Westell 6100 Series Modem / Router?

Mar 15, 2013

I have DSL via ethernet on my Mac through a Westell 6100 series modem/router, which also has a USB port. Is it possible to share my Internet connection, preferably via a cable not wireless, with a PC laptop by using the USB port (with an ethernet adaptor), or by splitting my present ethernet connection?

View 1 Replies View Related

Cisco WAN :: Connect Comcast Modem To 2800 Series Router?

Jun 29, 2011

I have a comcast business class cable modem and am trying to connect it to my cisco 2821 to route only certain types of traffic.

View 3 Replies View Related

Linksys Wireless Router :: Port Forwarding With E4200 And 660 Series Modem?

Oct 17, 2011

I have a e4200 router, And a 660 series modem, I'm trying to portforward for a game called minecraft, I cannot seem to get the ports to open, I've called Century link they told me to put my modem in to bridge mode, So I did they said my IP should be public not private now, It is still private

View 6 Replies View Related

Routers / Switches :: Configure SpeedTouch Router As Access Point?

Nov 5, 2011

i have a LAN network between several pc's connected with several switch's and connected to Thomson SpeedTouch 510 DSL Router its ip address is 10.0.0.100 subnet 255.0.0.0 and the router dont give auto ip to the PCs i have to issign it manually to the PCs "static ip".I bought the acer android recently so i bought a tp-link td-w8901g wireless router to act as an access point so i connected the 2 routers to each other by LAN and gave the tp-link an ip address 10.0.0.12 subnet mask 255.0.0.0 so it will be the same ip range of the speedtouch and setuped the tp-link router to fit my isp configeration it worked at first but i had to reset the router so i did the same configuration i did before but didnt work and i cant access the internet using the android or the wireless but when i connect the phone to the tp-link and unplug the speedtouch the wireless works so theres no any problem with the router?

View 1 Replies View Related

Set Up A New Belkin Modem / Router - No LAN

Jun 1, 2012

I am trying to set up a new Belkin modem/router.I have Internet on all three computers over both ethernet and wireless, but no local network. I think the problem may be IP addresses, but I cannot solve it.The LAN settings in the router now are:

DHCP (.) On

IP Pooling Start 192.168.2.2
IP Pooling End 192.168.2.100

Lease time: forever

LAN/DHCP Client List is empty.With the previous modem the IP addresses of the machines were from 192.168.1.2 upwards, but the new modem considers this range invalid.(This isn't specifically an XP problem as one of the machines is Window-7).

View 19 Replies View Related

Cisco WAN :: Will 2600 Series Router Support 10Mb 10 / 1000 Traffic From New Modem

Jun 26, 2012

We are upgrading our incoming Internet service from 30 Mb 10/100 to 100Mb 10/1,000.Will my 2600 series router support the 10Mb 10/1,000 traffic from my new modem?Do I need to change my interface speed from 100 to 1,000? I to be sure my router will support the upgrade. [code]

View 8 Replies View Related

Belkin Router Not Recognizing The Ericsson Modem?

Oct 11, 2012

My main networking device is the Ericsson T073G HGU ONT, and when I am connecting to the network through the Ethernet there are no problems. However when I connect my Belkin F6D4230-4 router to it (through cable) my router cannot recognize the modem.

View 18 Replies View Related

Belkin Router Will Not Connect To Cable Modem?

Aug 6, 2012

Last week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.

View 5 Replies View Related

Belkin N+ Wireless Modem Router Won't Boot?

Sep 8, 2012

We have owned a this router for nearly a year now, and recently it has been acting up.Today I added a static connection or something of the like for my Xbox, with the correct ip gateway and subnet mask. Since the restart it has never stopped cycling the boot sequence without end. The download lights cycle and the router light flashes constantly. And I am unable to connect to the router page at 192.168.2.1 So I cannot reset the router, the hardware reset button just momentarily pauses the endless booting process.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved