Thomson TG782T Modem - Gateway Not Found?
Jul 3, 2012
I purchased a computer which has a GA-B75M-D3H motherboard in it.I have been attempting to connect it to the internet with little success. I have a Thomson TG782T modem hooked to the computer by ethernet cable. The computer does not recognise the modem and the modem does not find the gateway on the computer. I have discussed the problem with Telstra and as far as they are concerned its not their problem due to the cable showing green and amber light into the back of the computer and the modem is working. The computer guys are saying that the computer is fine as they utilised the net to load the computer.
View 1 Replies
ADVERTISEMENT
Feb 28, 2012
! have a TELSTRA ADSL wireless router ( Thomson TG782T)I need to connect my 2 printers to it so I can operate them wirelessly to my laptop and Desktop computers
Laptop: TOSHIBA Satellite w/- windows 7 Professional
Desktop: ASI Computer w/- Windows 7 Ultimate currently connected to ADSL modem by yellow network cable.
View 1 Replies
View Related
Oct 22, 2011
The problem i'm having is that i'm using a 100gb capped internet plan, but after 1-2 weeks it gets all used up. After checking to see who's accessing the internet there's 2 unknown mac addresses who are constantly accessing the internet. Whenever this happens, the internet becomes considerably slower (i'm guessing they're torrenting or downloading off our internet).
I've even tried changing the wpa password but they're somehow still accessing the internet. So i've been looking for a way to ban mac adresses but i can't seem to find the option on the router.
Here's a screenshot:
YES, i know there's an option that says "Allowed on WLAN", but i cannot un-check the box for some stupid reason.
I really don't know what to do! Is there some kind of command i can type in the command prompt or something to ban mac address manually?
View 5 Replies
View Related
Oct 4, 2011
We recently got the telstra tg782t wifi modem from bigpond. When we first got it, we were able to connect and use the wifi on our ipods. but recently we have been connecting to the modem but when i go on safari or app store it says that it cannot find the server.
View 3 Replies
View Related
Feb 16, 2013
A Thomson TG585 v7 (Modem + WiFi Router) receiving a DSL connection and Providing internet access on two interfaces connection :
1- WiFi : to connect portable devices at my home.
2- 4 Ethernet ports : to connect my desktops.
One of these ports on my Thomson is connected to a D-link unmanaged switch to provide extended wired connections. From this unmanaged 4 ports switch one port is connected to my neighbors in another building through UTP, and connected to a D-link DIR 605-L WiFi router, the IP address of the DIR 605-L is 192.168.1.77 and the IP address of my local Thomson is 192.168.1.254 which means they are in the same network. I need to access the DIR 605-L WiFi router from my my home where I am connected directly to Thomson router through UTP cable, I am not able to do that !! , while also I can't even ping the DIR 605-L IP 192.168.1.77.
View 1 Replies
View Related
May 28, 2010
Life was great with my DIR-615 and Motorola Surf Board SB-5100 cable modem, but my D-Link refuses to recognize the Internet signal from the Thomson. The Comcast guy spent an hour trying to get it to work, but I'm stuck watching MLB.tv on a 24" monitor in a stiff office chair in my study, instead of on a 47" LCD in my living room. How can I force the DIR-615 to accept the Thomson ACG905? If you advise me to check settings or manually change them, please do not "assume" that I know how to access those settings.
View 6 Replies
View Related
Apr 7, 2011
I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?
View 2 Replies
View Related
Nov 30, 2012
I am using a Thomson ST516 v6 DSL Modem, through which I have connected a Tenda W311R+ Wireless Router. There's two laptops, one running Windows 7 Sp1, the other running Windows Xp Sp3, and an Android based phone using this connection. I should mention that the problematic laptop had Windows 7 before switching to Xp and ran without any issues.
[code]....
View 12 Replies
View Related
Oct 3, 2012
I have a Thomson tg782, with a USB port on the side. I want to plug my sub modem internet into that usb port, and then share that connection over wifi, because the router has a wifi function.
View 4 Replies
View Related
Apr 14, 2011
My ISP gave me a Thomson THG520 modem when I subscribed to their service. It has 2 links and USB and an Ethernet link. It worked fine with our 2 computers but for several weeks or so I experiencing that it only gives me IP address only on one interface that one that's first plugged into the computer.
If I reset the modem and plug in the USB I get an IP address immediately. If I unplug the USB and plug in the Ethernet cable I don't get an IP address. If I reset again the modem and plug in the Ethernet cable I get an IP address but not on the USB link after I unplug the modem.
EDIT: after entering the modem's administration I realized it's firmware was updated (probably my ISP did it.). Also I read about how this stuff works, there is an evidence that my ISP set the CPE limit to 1. (so it seem only one computer connected to the modem can get IP address while the other can't.). And this configuration is stored on the modem somewhere. Is there a way to view it somehow?
View 1 Replies
View Related
Dec 4, 2012
I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies
View Related
Feb 11, 2011
I'm trying to setup a Canyon CN-FW514 wireless router through a Thomson modem.When I first started trying, I could get up the set-up screen on [URL] however this is as far as I got; the laptop said it had a very strong signal with the wireless connection, but I could not get any web pages to open (windows explorer couldn't detect any problems either). The Thomson modem works when I conect it to the laptop via the ethernet cable, but that's not much use to me trying to use the internet elsewhere in the house!I tried changing the IP address, subnet mask and gateway IP address on the set-up screen [URL] which seems to have been a big mistake; I now can't even get the set-up screen to appear.I've reset the internet options and have set everything to obtain the IP address automatically but am still having no luck.
View 5 Replies
View Related
Nov 8, 2011
Five months ago we moved into a new apartment, and connected up our broadband; the ISP provides a Thomson Speedtouch modem (ST546 v6), which I understand from Tech Support is running software v4 (it was issued with V5, but rolled back to V4 for stability issues).We prefer a WiFi network, so purchased a Belkin N Wireless Modem Router (F5D8636-4 v2); I connected it up ditching the ISP issued modem, and all worked well for four months. Suddenly it refused to see the ADSL connection - orange light flashing.So after four nights of 'fault resolution' with Belkin, they decided to send me a replacement... which I finally received last night. It didn't work - same problem, flashing orange light.I have the correct user name and password for the ISP - checked it not once, not twice, but four times. The Thomson Speedtouch works, but doesn't provide a WiFi environment. Can I connect the Belkin modem router into the back of the Thomson and transmitt/carry the WiFi signal that way, and if so, how? I tried (the obvious to me) plug a ethernet cable from the Thomson modem into the Belkin, but nothing.. I'm guessing there are a few important steps I missed.
View 3 Replies
View Related
Jun 6, 2011
So I used to use a Thomson TG585v7 modem router (wireless) as my means of connecting to the internet, the aerial cracked on it and I began getting dropped connections, so I went out and bought a D-Link DSL-2730B modem+router. I am hooked up wirelessly to the internet as there is no phone jack in my bedroom, and I experience massive and prolonged lag while playing call of duty 4 multiplayer, which I never had before with my old Thomson modem. My ping also shoots up to about 400 and then 999 while I teleport around the map.
View 3 Replies
View Related
Aug 11, 2011
I am using two desktops. One is an old Windows XP running SP3, and the other is a new Windows 7. Neither PC is wireless. I set up the modem through the Windows 7 computer, and it is connected to the wireless modem through the Ethernet cable. (I hope that I am saying all of this correctly.) It's running just fine.Because the other PC is not wireless, I purchased a NETGEAR wireless USB adapter, go through installation and setup, starts and finds my SSID, add WEP key, etc, etc. In the bottom corner of the software it says the signal is good. In the toolbar it says the adapter is connected to the modem.Next to it, though, the network connections icon shows:
Wireless Network Connection
Speed: 24Mbps
Signal Strength: Good
Status: Limited or no connectivity
And so, of course, I have no connection to the Internet. Using the modem through Ethernet on the XP computer (switching the situation around, in other words) is not an option; the only phone line for connecting the modem to the wall is too far away.(It was stated more than once that I should use WPA instead of WEP; I haven't made it that far yet... I'm just trying to get this other computer connected.)
View 6 Replies
View Related
Jul 14, 2012
Just bought this Linksys AE3000 Wireless Adapter. I followed the directions, run Setup on DVD....then plug unit it.Adapter NOT Found!Unit Blinks Blue light every 8 seconds..
Note, that when first plugged in.......Device driver auto downloaded...and said ready for use. I gather through Windows 7
View 1 Replies
View Related
Sep 13, 2012
So I have a desktop connected to a Thomson TG782T via the ethernet cable, (this desktop is running Windows7). I also have a laptop which allows me to use the wireless modem for the internet, (Windows XP sp3) but what I cannot seem to do is set up a network between the 2 pc's to share files, printer, and also game together.
View 1 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no [COLOR=blue !important][COLOR=blue !important]signal[/COLOR][/COLOR] from the wireless, like i cannot use my phone or laptop on the internet i use an ethernet cable which is direclty connected to my main PC my windows is also window XP and my modem model is TG782T only if my pc is turned off the wireless works
View 17 Replies
View Related
Jan 15, 2012
Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an ethernet cable which is direclty connected to my main PC. My windows is also window XP and my modem model is TG782T only if my pc is turned off the wireless works.
View 2 Replies
View Related
Oct 16, 2011
We have telus firbe internet at this house. we have two connections each 25m-bit we've both got actiontech V1000H's. What im thinking is we hook each gateway up to a host pc (server) and go out from there to a switch (one line dedicated input, the other output as to not clog throughput), then from the switch out to two pc's in the house. phones xbox ect can use its own router(s) in theory would this work.
server specs
intel core 2 quad q8300 2.5 ghz
6 gb ddr2 800
2 tb hdd
all based on gigabit lan will have additional network cards added for now we're doing a simple data server, but we've been pondering on how to get two separate connections to work in unison?
View 1 Replies
View Related
Feb 13, 2012
For some reason, whenever I go home (I'm in college right now), my internet goes haywire. It'll connect for about an hour or so when I first load it up, but after that, it refuses to connect at all. If I restart my modem (verizon fios modem), then it'll connect for about 5 minutesIf I run the troubleshooter, sometimes it doesn't detect anything wrong with it, and other times, it says "the default gateway is not available"[CODE]
View 1 Replies
View Related
Apr 28, 2012
Lastnight I power cycled my cable modem, and router in an attempt to get a Slingbox to work. What ended up happening is that after the modem and router came back online all the computers on my wired home network changed their default gateway to the IP of the modem and not the router. Two of the computers are fixed now, but one of the laptops is still not able to get to the internet using DHCP. I can use a static IP with the correct default gateway for the router, and succesfully get to the internet, but then I can't see my server on my netowrk. And the same is true in reverse, in order to see my server I have to go back to DHCP, but I can't get on the internet
View 1 Replies
View Related
Jun 8, 2012
I just moved into a new place and the cable company supplied me with a Motorola sbg6580 gateway and I have a netgear wnr3500l router with dd-wrt. because of location I have computers plugged into both devices (htpc and game consoles in the gateway, desktops in the netgear). how would i configure the gateway and router so everything sits on a single network AND the netgear with dd-wrt handling all the heavy lifting (port forwarding mostly)
View 2 Replies
View Related
Jul 31, 2012
i am using a tp link 8817 modem, i can go online normaly but i can not access the default gateway (192.168.1.1, i check it in cmd/ipconfig) it keeps asking me username and password, althought i filled them with the correct username and password.
View 2 Replies
View Related
Jun 27, 2012
I have somthing to ask about the ADSL modem and wifi router. (I am using Windows Xp) I have 1 ADSL modem, TP LINK TD 8812, with 2 port, LAN and USB, on the modem has 5 blinking lights, USB, LAN, ADSL, Internet and Power, I use USB port for my laptop, so that 4 lights were turned on, except the LAN's, I also have a wifi router, TENDA w316r, which is connect to the modem by LAN port, when it's connected, the LAN's light in the moden will turn on. That's what it usually works. But now, when I connect the router to the moden, the LAN's ligh on the modem just flashing then turn off right away, it works fine on different machine. I don't know why, I think it's software problem. What do you guy's think about that ? About the gateway, the modem has 1 gateway, the router has 1 gateway, too. At first, when I connect the router, I can only access to the router's gateway, when I disconnect the router, I'm back to the moden's router, how to fix that ? I want to sefl control which gateway I can connect. And now, I just can't connect to any of the 2 gateway, the router's gateway, since the LAN's light on the moden not turned on, I think that's where it begins. But the modem's gateway ? I can connect to the internet as usually but I can't access to the modem's gateway, whenever I type "192.168.1.1" (modem's default gateway) a window appears (Authentication Required) then I fill the username and password with the right infomation, then click ok but it still appears after and after and after that, when I click cancel, then browser says "Protected Object" and I can't connect to modem's gateway.
View 2 Replies
View Related
Apr 4, 2012
My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.
View 2 Replies
View Related
Sep 21, 2012
I bought this wonderful voice gateway off the internet from someone. So not sure if they ever used it with Comcast.So far I hatve had no internet once I plug it to the cable. I have asked Comcast tech for activating this device. However they say it is not supported and they have tried sending it the Activation signal but they say it fails. I can see all lights lit up and go green when I connect this device to the cable, is there a firmware upgrade for DPQ3925 ?
View 2 Replies
View Related
Oct 11, 2012
I have the Cisco EPC3825 EuroDocsis 3.0 Gateway and i cannot get statistics from this modem on snmp. Use snmpwalk. Nothing was found in settings of device.
View 1 Replies
View Related
Nov 6, 2012
So network was running fine for about a year or so. Network consists of 1 Motorola SB6120 cable modem attached to a D-Link DIR-601 wireless router. All settings were default except for SSID and WPA password. One day I just couldn't access internet anymore. I've narrowed it down to the default gateway that is being given out through DHCP. The default gateway that is being given out is the IP of the modem (192.168.100.1) and not of the Router (192.168.0.1). I can't find any option on Wireless router to be able to force the gateway address when handing out the gateway IP. Theoretically I thought I should be able to put router on same subnet as modem as 192.168.100.2 but that still doesn't work. If I set the IP adresses statically on the PCs and give it the Gateway of the Router everything works fine. I should mention this is for my boss' house and basically I dont want him calling me everytime he has a friend come over and I have to talk em through setting up a Static IP.
And just for an example this is what I get if I use DHCP:
IP Address: 192.168.0.155
Mask: 255.255.255.0
DNS: 192.168.0.1
Default Gateway: 192.168.100.1
And If I want it to work I have to change the default gateway to 192.168.0.1 I've tried updating routers firmware and reset to factory default numerous times. Is it possible for a router DHCP stop working?
View 3 Replies
View Related
Oct 8, 2012
I am moving a very small branch office to a new location, but we have a centrally controlled IT infrastructure team in Europe. I would like to implement a hosted VOIP solution without impacting the current network setup (i.e., VPN/Firewall) or asking this IT team to change anything on the existing LAN Network except the IP address/gateway. The VOIP system will have its own cabling.
Here is the configuration I would like:
• Cisco 861 as main gateway to the Ethernet from the ISP’s modem
• 2 static public IPs from the ISP, one for the VOIP network and one for the LAN
• Cisco 861 acting as NAT/DHCP for the VOIP system on one static public IP
• My company’s Juniper device on the second static public IP managing NAT for the LAN
I have a diagram here to map out what I am considering:
Two options I have seen:
• Setup Proxy ARP on the Cisco router, allowing the Juniper device a transparent (and unsecured/firewalled) route to the internet to get the Public IP and manage the LAN (seen in picture)
• Install an additional switch (with proper QOS prioritizing VOIP) at main entry point of location, and have both routers behind this (to minimize configuration of the Cisco router).
View 3 Replies
View Related
Sep 20, 2012
i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to 192.168.0.1 and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in
View 1 Replies
View Related
Feb 15, 2011
I have a problem with my thomson tg585 v7 router wich is that I can't gain access to it, each time I enter the default username and password (admin ; admin) it automaticly brings me back to the previous page.
View 1 Replies
View Related
Mar 4, 2013
I am trying to reset my wireless network's security key and so far it is not working.
View 1 Replies
View Related
