A Thomson TG585 V7 :: How To Access Modem Router Behind Another
Feb 16, 2013
A Thomson TG585 v7 (Modem + WiFi Router) receiving a DSL connection and Providing internet access on two interfaces connection :
1- WiFi : to connect portable devices at my home.
2- 4 Ethernet ports : to connect my desktops.
One of these ports on my Thomson is connected to a D-link unmanaged switch to provide extended wired connections. From this unmanaged 4 ports switch one port is connected to my neighbors in another building through UTP, and connected to a D-link DIR 605-L WiFi router, the IP address of the DIR 605-L is 192.168.1.77 and the IP address of my local Thomson is 192.168.1.254 which means they are in the same network. I need to access the DIR 605-L WiFi router from my my home where I am connected directly to Thomson router through UTP cable, I am not able to do that !! , while also I can't even ping the DIR 605-L IP 192.168.1.77.
View 1 Replies
ADVERTISEMENT
Feb 15, 2011
I have a problem with my thomson tg585 v7 router wich is that I can't gain access to it, each time I enter the default username and password (admin ; admin) it automaticly brings me back to the previous page.
View 1 Replies
View Related
Apr 7, 2011
I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?
View 2 Replies
View Related
Feb 22, 2013
I have a "Thomson TG585 v7" router I reset it and the default username is "user" and password is "admin". So after the restart I want to configure again the router so I click the "Set Up" option I click "Next" and then show me to enter again the username and password but they are not the same as the router username and password. What can I do?
View 13 Replies
View Related
Aug 4, 2012
I have an issue with my home network that is really stressing me out now. I have a Thomson TG585 v8 router that my laptop, iPad and iPhone connect to no problem but my iPad/iPhone won't talk to my laptop.. I want to be able to use my iPad to remote in to my laptop to watch movies etc. Network sharing is on the laptop and I've checked that all devices are on the same network..I can't ping the iPad or iPhone from the laptop either.
View 9 Replies
View Related
Dec 15, 2012
My old router recently died and my ISP was kind enough to offer this Thomson one free. But ever since I got it, my PCs cant see each other on the homegroup. They can all get onto the internet - and by using programs like Dropbox or Teamviewer I can share info from one to the other- but I'd like to get my homegroup working again, Both my PCs are running Win 7, connecting wirelessly to the network. When trying to tracert from one to the other it gives this message: Tracing route to GLaptop.lan [192.168.1.79] over a maximum of 30 hops: 1 GDesktop.lan [192.168.1.82] reports: Destination host unreachable. The problem persists when firewalls on both PCs are disabled, and I've attempted to delete the homegroup on both PCs and re-create it.
View 5 Replies
View Related
Aug 15, 2012
I have Thomson Tg585 v7 router, when trying to add new game application to set the ports for GW2 my router just restart by it self, and i can't add the application even if i do it fast it won't take any name i try for it,even tho i did add ports for BF3 like 2months ago and it worked fine.
View 1 Replies
View Related
Jan 10, 2012
My isp seems to be using a Transparent DNS proxy and I tested DeleGate on a windows PC and opendns works but I would like to set my router to forward all 53 udp to 5353 udp on to 208.67.222.220 so that opendns can work on ipod,ipad and smartphone etc, I have tried to use the following command to set the router to forward from port 53 to 5353 but no luck:
nat mapadd intf=Internet outside_addr=208.67.222.220 inside_addr=192.168.1.66 protocol=udp outside_port=5353-5353 inside_port=53-53 mode=auto weight=10
View 2 Replies
View Related
Oct 3, 2012
I have a Thomson tg782, with a USB port on the side. I want to plug my sub modem internet into that usb port, and then share that connection over wifi, because the router has a wifi function.
View 4 Replies
View Related
Dec 4, 2012
I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies
View Related
Feb 11, 2011
I'm trying to setup a Canyon CN-FW514 wireless router through a Thomson modem.When I first started trying, I could get up the set-up screen on [URL] however this is as far as I got; the laptop said it had a very strong signal with the wireless connection, but I could not get any web pages to open (windows explorer couldn't detect any problems either). The Thomson modem works when I conect it to the laptop via the ethernet cable, but that's not much use to me trying to use the internet elsewhere in the house!I tried changing the IP address, subnet mask and gateway IP address on the set-up screen [URL] which seems to have been a big mistake; I now can't even get the set-up screen to appear.I've reset the internet options and have set everything to obtain the IP address automatically but am still having no luck.
View 5 Replies
View Related
Nov 8, 2011
Five months ago we moved into a new apartment, and connected up our broadband; the ISP provides a Thomson Speedtouch modem (ST546 v6), which I understand from Tech Support is running software v4 (it was issued with V5, but rolled back to V4 for stability issues).We prefer a WiFi network, so purchased a Belkin N Wireless Modem Router (F5D8636-4 v2); I connected it up ditching the ISP issued modem, and all worked well for four months. Suddenly it refused to see the ADSL connection - orange light flashing.So after four nights of 'fault resolution' with Belkin, they decided to send me a replacement... which I finally received last night. It didn't work - same problem, flashing orange light.I have the correct user name and password for the ISP - checked it not once, not twice, but four times. The Thomson Speedtouch works, but doesn't provide a WiFi environment. Can I connect the Belkin modem router into the back of the Thomson and transmitt/carry the WiFi signal that way, and if so, how? I tried (the obvious to me) plug a ethernet cable from the Thomson modem into the Belkin, but nothing.. I'm guessing there are a few important steps I missed.
View 3 Replies
View Related
Jun 6, 2011
So I used to use a Thomson TG585v7 modem router (wireless) as my means of connecting to the internet, the aerial cracked on it and I began getting dropped connections, so I went out and bought a D-Link DSL-2730B modem+router. I am hooked up wirelessly to the internet as there is no phone jack in my bedroom, and I experience massive and prolonged lag while playing call of duty 4 multiplayer, which I never had before with my old Thomson modem. My ping also shoots up to about 400 and then 999 while I teleport around the map.
View 3 Replies
View Related
Jul 3, 2012
I purchased a computer which has a GA-B75M-D3H motherboard in it.I have been attempting to connect it to the internet with little success. I have a Thomson TG782T modem hooked to the computer by ethernet cable. The computer does not recognise the modem and the modem does not find the gateway on the computer. I have discussed the problem with Telstra and as far as they are concerned its not their problem due to the cable showing green and amber light into the back of the computer and the modem is working. The computer guys are saying that the computer is fine as they utilised the net to load the computer.
View 1 Replies
View Related
May 28, 2010
Life was great with my DIR-615 and Motorola Surf Board SB-5100 cable modem, but my D-Link refuses to recognize the Internet signal from the Thomson. The Comcast guy spent an hour trying to get it to work, but I'm stuck watching MLB.tv on a 24" monitor in a stiff office chair in my study, instead of on a 47" LCD in my living room. How can I force the DIR-615 to accept the Thomson ACG905? If you advise me to check settings or manually change them, please do not "assume" that I know how to access those settings.
View 6 Replies
View Related
Nov 30, 2012
I am using a Thomson ST516 v6 DSL Modem, through which I have connected a Tenda W311R+ Wireless Router. There's two laptops, one running Windows 7 Sp1, the other running Windows Xp Sp3, and an Android based phone using this connection. I should mention that the problematic laptop had Windows 7 before switching to Xp and ran without any issues.
[code]....
View 12 Replies
View Related
Apr 14, 2011
My ISP gave me a Thomson THG520 modem when I subscribed to their service. It has 2 links and USB and an Ethernet link. It worked fine with our 2 computers but for several weeks or so I experiencing that it only gives me IP address only on one interface that one that's first plugged into the computer.
If I reset the modem and plug in the USB I get an IP address immediately. If I unplug the USB and plug in the Ethernet cable I don't get an IP address. If I reset again the modem and plug in the Ethernet cable I get an IP address but not on the USB link after I unplug the modem.
EDIT: after entering the modem's administration I realized it's firmware was updated (probably my ISP did it.). Also I read about how this stuff works, there is an evidence that my ISP set the CPE limit to 1. (so it seem only one computer connected to the modem can get IP address while the other can't.). And this configuration is stored on the modem somewhere. Is there a way to view it somehow?
View 1 Replies
View Related
Feb 28, 2012
! have a TELSTRA ADSL wireless router ( Thomson TG782T)I need to connect my 2 printers to it so I can operate them wirelessly to my laptop and Desktop computers
Laptop: TOSHIBA Satellite w/- windows 7 Professional
Desktop: ASI Computer w/- Windows 7 Ultimate currently connected to ADSL modem by yellow network cable.
View 1 Replies
View Related
Aug 10, 2012
I have a difficulty finding password TG585 u8 PSTN. The router works for my laptop, now I need the password in order to use my Kindl and cannot find it.
View 1 Replies
View Related
Mar 4, 2013
I am trying to reset my wireless network's security key and so far it is not working.
View 1 Replies
View Related
Jan 2, 2012
i have configured my wireless router.But im having problems. I can connect to the the internet using a lan cable which is connected to the router. but when im using the wireless connection i do not have internet connectivity.
View 1 Replies
View Related
Feb 4, 2012
I have cable internet with 12 Mbit download and 1.25 Mbit upload speed. I'm using Thomson TGW850-4 router and I'm sharing the connection with my brother. Each of us have our own PC, of course.
Problem is, my brother downloads torrents while I play online games which completely screws up with my ping (from 40-80 to 350+) which makes them pretty much unplayable.
Is there a way to split the connection in two so that each of us gets 6 Mbit download and 0.625 Mbit upload at all times so that his torrents don't interfere with my online games?
View 7 Replies
View Related
Aug 21, 2012
I'm using a Thomson TG784 router, but it can't get it's DHCP server. This is what it gives me once I let it configure itself.
Note: I pressed the reset button on the router and reset it to the factory defaults.
View 1 Replies
View Related
Feb 9, 2012
Our ISP provided a Thomson dwg855 at installation of our service.We need greater coverage.Is is possible to use the output port on the modem to connect to a wireless router or other wired device?
View 2 Replies
View Related
Apr 24, 2011
I currently have a Thomson speedtouch router that i have yet to connect to my pc as i am waiting for the adaptor for it.I use AOL adsl line aol have goiven me instructions to connect the router to my PS3 either wireless or ethernet cable.I go through all the instructins but when i finally check connection it finds ip address but the internet connection has failed ie timed out 80028E02?
View 1 Replies
View Related
Jul 14, 2012
I have a thomson speedtouch ST585 router hooked up to my DSL line. I am trying to replace the wifi AP of the thomson with my linksys router (running dd-wrt). So far I have connected the linksys router (from the internet port) to the thomson router, and turned the thomson's wifi off. But, now I can't connect to the internet though the linksys router...I have tried disabling DHCP with no success?
Update:I can now connect to the internet through the linksys router, the problem now is that I cannot access the linksys's routers setup page. I can access the speedtouch's though.[URL] I would like to be able to manage all the forwarding (and the ip's) though the linksys router NOT the thomson (I want to make the linksys router the core router). I just need the thomson for my DSL line, I don't want it to do anything else but provide internet to the linksys router.
View 7 Replies
View Related
Apr 30, 2011
AOL are a complete waste of time and space in my opinion as for one you cannot understand what there tech support is saying and even when you email there tech support they seem to answer with a totally different answer to my questions.I have just installed a pci card ethernet connection on my pc windows xp now all I want to now do is connect and configure my router on the internet, I currently use aol dial.bb broadband adsl connection so far there are no connections from the router connected to my pc as i am still using a bt voyager 105 modem.When i did connect the ethernet cable to my pc and into the router also i connected the adsl cable into the back of the router but aol have not explained how to connect to the internet to configure this router and get it to work.
View 2 Replies
View Related
Aug 21, 2012
I have a Thomson TG784 router and i have a problem with it. once i turn on my rouet, and no cables are plugged in, except the power one, the two lights start blinking. The Power and the Ethernet ligh blinking. Once i connect my Ethernet cable and my DSL cable, the light are still blinking with no changes... What should i do?
View 1 Replies
View Related
Oct 11, 2011
I'm trying to create a VPN through a Cisco 861 but the problem is that the ISP forces me to use a SpeedTouch gateway ( as they use the MAC address for the authentication).By now, i'm getting OK pinging from client to 192.168.254.1, but I can't reach Internet.If I connect the client directly to the Speedtouch internet works properly. [code]
View 1 Replies
View Related
Dec 8, 2011
I have a Netgear N router that worked fine with our old modem we recently revamped our modem to the Motorola Surfboard Extreme and it won't allow the router to connect to the internet.
View 1 Replies
View Related
Sep 18, 2012
Can I access my Motorola SB6120 SURFboard DOCSIS 3.0 eXtreme Broadband Cable Modem while remaining behind my pfSense router?
My LAN Subnet is 10.0.0.1-254.
View 4 Replies
View Related
Oct 9, 2012
my router and modem is working but no internet acess ive try rebooting my router but still noting change...dont know what to do...h
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Userslito lapid>ipconfig/all
[Code]......
View 19 Replies
View Related
May 15, 2012
I bought the DIR 655 to put into our network as the Netopia wireless fails to connect even though we have maximum signal strength. Att advised that buying a third party router would solve this problem.I did manage to almost configure the DIR 655. I would have to connect it to the system to test it[CODE]
View 5 Replies
View Related
