Thomson TG585 - Destination Host Unreachable
Dec 15, 2012
My old router recently died and my ISP was kind enough to offer this Thomson one free. But ever since I got it, my PCs cant see each other on the homegroup. They can all get onto the internet - and by using programs like Dropbox or Teamviewer I can share info from one to the other- but I'd like to get my homegroup working again, Both my PCs are running Win 7, connecting wirelessly to the network. When trying to tracert from one to the other it gives this message: Tracing route to GLaptop.lan [192.168.1.79] over a maximum of 30 hops: 1 GDesktop.lan [192.168.1.82] reports: Destination host unreachable. The problem persists when firewalls on both PCs are disabled, and I've attempted to delete the homegroup on both PCs and re-create it.
View 5 Replies
ADVERTISEMENT
Dec 16, 2011
Im running 10 units of computers, anyhow my server has no internet connection, the other 9 units has net connection,when i ping the diagnosis is destination host unreachable.I'm using windows XP.
View 1 Replies
View Related
May 11, 2012
My internet connection started to disconnect after an office mate used my PC. I thought it was just the cables but it's not. I pinged my ip address and its okay (sent=4; received=4). But when i ping Yahoo! and other websites, it said that "Destination host unreachable" (sent=4;received=0;lost=4;100% loss). What should I do to make my connection okay? I didn't ask assistance from our IT personnel bcoz they said if i want to reconnect/reinstall connection, I have to get an approved request from our bosses. And I don't like being asked bcoz they are like tyrant bosses.
View 2 Replies
View Related
May 7, 2011
I have 2 brand new systems, a desktop running Windows 7 Pro connected with a had line, and a laptop running Windows 7 Home Premium connected wirelessly. Both can access the router, both can access the internet, both can be pinged from the router. However, they absolutely cannot see each other on the network. If I try to ping by name, the addresses don't resolve. If I try to ping by IP, I get either no reply or the "destination host unreachable."I've disabled firewall completely on both. I've double, triple, quadruple checked all sharing settings (network discovery is enabled on both, sharing enabled everywhere, etc. etc.). I've tried disabling all other network adapters on the laptop, no difference. I've tried all of the online tips about repairing winsock.
View 8 Replies
View Related
Mar 17, 2013
ping 10.0.0.1 -t give me destination host unreachable in the same time when i wright ping 192.168.1.1 -t it give me the correct reply but the net doesnt work
View 3 Replies
View Related
Oct 17, 2011
when do we get Desteination host Unreachable and time to live exceeded while trying to ping .
From 10.1.1.1 icmp_seq=2 Destination Host Unreachable
From 10.1.1.1 icmp_seq=4 Destination Host Unreachable
From 10.1.1.1 icmp_seq=7 Destination Host Unreachable
View 1 Replies
View Related
Apr 12, 2012
Cisco Linksys E3000
I have different types of network clients connecting to both bands of router (5 ghz and 2.4 ghz), and both bands set to WPA2 only. Everything has been set up and working for the past year with no problems.
Suddenly this morning, none of the 2.4 ghz clients can connect and get authenticated. When I attempt to ping them from a Windows 7 desktop connected by a LAN cable, I get Destination Host Unreachable.
The 5 ghz clients are fine and have had no problems. I tested this with the New iPad connected to the 5 ghz band.
Rebooted the E3000 router and the Comcast cable modem, then installed the newest firmware on the E3000 using the web access portal at 192.168.1.1, and still not working.
Changed the WPA2 Personal security mode for the 2.4 ghz band to WPA2 Personal/WPA Mixed Mode, and now all the clients are connected and authenticated and working OK, albeit slower.
What happened? And how can I fix this so I can change the security mode for the 2.4 ghz band back to WPA2 Personal?
P.S. The types of clients that connect to the 2.4 ghz band are 2 Windows 7 desktops, a Windows 7 laptop, and 5 Cisco Wireless N Internet Home Monitoring Cameras. The camera feeds have slowed down considerably using this Mixed mode.
View 1 Replies
View Related
Jun 8, 2012
My company has a Cisco IAD 2400 which is handling our phones and the internet (from Service Provider). We are adding a second router, a Cisco 1921, to our network,I think I have everything set up correctly. One department is using the 192.168.2.0/27 subnet. I can ping each computer within that subnet. Also, within this subnet, I can ping the router interface at 192.168.2.1. I can ping 192.168.1.2 successfully as well. This is the interface on the 1921 that goes to the 2400. However, if I try to ping 192.168.1.1 (interface on 2400), I get "Reply From 192.168.1.236: Destination Host Unreachable" I get the same thing if I ping 8.8.8.8.Within the 1921, I can ping 192.168.1.1 and 74.125.224.72 (random google ip) successfully.
View 1 Replies
View Related
Mar 4, 2011
I am using the window server 2008 and configure tcp/ip properties correct ping locally reply successful when ping localy but when ping yahoo.com then reply destination host unreachable whereas gateway and dns ip is also correct configure so tell me solution about this problem because i am useing the internet.
View 1 Replies
View Related
Jan 2, 2011
I attempted to upgrade the firmware on the WRT54G2 V1 (the newer, slim black model) but it failed. I let the upgrade run for about 10 minutes and it just sat there and link to router disconnected I run ping for 192.168.1.1 but response is "DESTINATION HOST UNREACHABLE". The router is now completely unusable and the ALL LAN ports lights are ON and Internet light is also ON.
View 9 Replies
View Related
Feb 15, 2011
I have a problem with my thomson tg585 v7 router wich is that I can't gain access to it, each time I enter the default username and password (admin ; admin) it automaticly brings me back to the previous page.
View 1 Replies
View Related
Feb 16, 2013
A Thomson TG585 v7 (Modem + WiFi Router) receiving a DSL connection and Providing internet access on two interfaces connection :
1- WiFi : to connect portable devices at my home.
2- 4 Ethernet ports : to connect my desktops.
One of these ports on my Thomson is connected to a D-link unmanaged switch to provide extended wired connections. From this unmanaged 4 ports switch one port is connected to my neighbors in another building through UTP, and connected to a D-link DIR 605-L WiFi router, the IP address of the DIR 605-L is 192.168.1.77 and the IP address of my local Thomson is 192.168.1.254 which means they are in the same network. I need to access the DIR 605-L WiFi router from my my home where I am connected directly to Thomson router through UTP cable, I am not able to do that !! , while also I can't even ping the DIR 605-L IP 192.168.1.77.
View 1 Replies
View Related
Feb 22, 2013
I have a "Thomson TG585 v7" router I reset it and the default username is "user" and password is "admin". So after the restart I want to configure again the router so I click the "Set Up" option I click "Next" and then show me to enter again the username and password but they are not the same as the router username and password. What can I do?
View 13 Replies
View Related
Aug 15, 2012
I have Thomson Tg585 v7 router, when trying to add new game application to set the ports for GW2 my router just restart by it self, and i can't add the application even if i do it fast it won't take any name i try for it,even tho i did add ports for BF3 like 2months ago and it worked fine.
View 1 Replies
View Related
Apr 7, 2011
I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?
View 2 Replies
View Related
Aug 4, 2012
I have an issue with my home network that is really stressing me out now. I have a Thomson TG585 v8 router that my laptop, iPad and iPhone connect to no problem but my iPad/iPhone won't talk to my laptop.. I want to be able to use my iPad to remote in to my laptop to watch movies etc. Network sharing is on the laptop and I've checked that all devices are on the same network..I can't ping the iPad or iPhone from the laptop either.
View 9 Replies
View Related
Jan 10, 2012
My isp seems to be using a Transparent DNS proxy and I tested DeleGate on a windows PC and opendns works but I would like to set my router to forward all 53 udp to 5353 udp on to 208.67.222.220 so that opendns can work on ipod,ipad and smartphone etc, I have tried to use the following command to set the router to forward from port 53 to 5353 but no luck:
nat mapadd intf=Internet outside_addr=208.67.222.220 inside_addr=192.168.1.66 protocol=udp outside_port=5353-5353 inside_port=53-53 mode=auto weight=10
View 2 Replies
View Related
May 12, 2012
i have my 9 computers 1 prolink modem/router h5200 and tplink switch...for 3 months my connection is quite good..but in the 4th month its starting to Reply 192.168.1.1 Destination net Unreachable..i called up a technician from the network..He changed my modem/router with the same model and it runs for an hour... 5-6 hrs..the problem starts again it begins to ping Reply 192.168.1.1 Destination net Unreachable...b4 my TCP/IP i configured it automatically but now i try to put it manually...my modem/router starts with 192.168.1.1 my first unit starts in 192.168.1.2 and so on.
View 1 Replies
View Related
Jan 13, 2011
i play medal of honor and want to host the game as a server how do i set my thomson dwg855 to allow this?
View 1 Replies
View Related
Feb 25, 2013
I have a home network with 3 machines. In switch mode "residential gateway" I can connect to MySql on local network, but not remotely (internet). In "cable modem" I can connect to local both network and Internet, with the MySQL server, but I can only use one machine on the network.
I have opened port 3306 in Windows Firewall and the moden-router and redirected to the IP of the machine that has MySql Server. I have dynamic IP, but my ISP gives you the same IP by sector, so I can do testing.
How to get my connection to work well on local network and the Internet, using the mode "residential gateway"?
View 1 Replies
View Related
Sep 26, 2011
I've tried everything that has been posted so far except for opening up the router itself which I will refuse to do.- Getting = Host Unreachable 192.168.1.20 (I am using 192.168.1.1 as the gateway)- No ping whatsoever even when turning on the router over and over.
View 2 Replies
View Related
Jul 8, 2012
Up until recently one of my sites was able to get to a postilion subnet. Then we started receiving "host unreachable" e-mails. Posting told us SMTP traffic was not getting let in. I've compared the current config to a config that was saved before the issue popped up and found really no noticeable difference.
I tried a packet tracer trace with no luck: SiteB- Firewall# packet-tracer input outside tcp 11.2.2.36 12345 65.19.0.0 25.
Phase: 1
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
[code]...
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
Attached is a sanitized config. I'm not entirely convinced it's a firewall issue, but I need to some successful testing to prove otherwise.
View 19 Replies
View Related
Aug 10, 2012
I have a difficulty finding password TG585 u8 PSTN. The router works for my laptop, now I need the password in order to use my Kindl and cannot find it.
View 1 Replies
View Related
Feb 10, 2011
I'm just wondering if its possible to ping an IPv4 host using the IPv6 host assuming that the NAT64 has already been implemented?
[code]...
View 2 Replies
View Related
Jun 27, 2011
I have a host that can successfully connect to a PIX 515E (7.x OS) via VPN Client; however, I have no IP routing to the LAN from the remote host.The VPN IP pool works finem,The LAN default gateway is the inside interface on the PIX; the network is flat L2 behind it.The default route on the PIX points out; no other routes are defined,The VPN remote host can be pinged from LAN hosts, but the VPN remote host cannot ping any LAN host, not even the PIX inside interface.
View 2 Replies
View Related
May 7, 2012
ASA 5510
Ver 8.2(5)
I have been looking all over the place for the answer of how to allow clients on an IPSEC VPN to ping from host to host.
View 4 Replies
View Related
Jun 9, 2013
After reconfiguring my LMS 4.1 from snmp v2 to snmp v3 the endhost aren't reachable anymore. Before configuring the snmp v3 I have purged the endhost database in order to repopulate it. After the jobs run no endhost could be added to repository. It just says unreachable.
Could it really be a snmpv3 issue? Everytihng else is working as before. I'll have to go back to snmp v2.
View 4 Replies
View Related
Jun 17, 2011
So we have a cisco asa 5505. Once a day now (random times) it will suddenly be unreachable along with the hosts connected. If I console in and ping a host from the asa, suddenly it becomes reachable from the outside world again. My job prohibits me from posting the configuration online.
View 10 Replies
View Related
Aug 20, 2011
I any running Cisco Works LMS 4.0 on Windows 2008 Enterperise Edition with SP2.I am facing 2 issue which are below:
1. Get message "You are using unsupported Version". As per Cisco document Windows 2008 Ent edition is support by LMS 4.0
2. All of my devices are showing unreachable. I already double check the Devices Credential include SNMP (Read and Write community) and Username and passwords.I can accessble all devices via telnet from the same Cisco Works Machine.
View 1 Replies
View Related
Jan 31, 2013
I have discovered my switches in LMS but it is showing unreachable what can be the reason ?
View 5 Replies
View Related
Mar 15, 2013
in my test LAB i have used a 5505 running 9.1.1.I have setup a DC (2008R2) and then AD Agent.I have configured and used Identity firewall rules which worked like a charm.I have also used LDAP Auth which also worked fine.I then disabled all the rules but kept the identity firewall checked.Since it was a lab environment, i had to remove the DC for other tests.A few hours later the ASA initially was stuck.I used the console and i saw it could ping noone! not even directly attached PCs or defgw (i was able to ping them before it stucked).No arp table also!the asa did no NATing so no xlate entries were vavailable.Then i sshed to it.I got a blank screen and from console i could see cpu-usage from ssh to 20%I opened a second ssh: nothing. Blank Screen again. cpu-usage from ssh to 40% (overall ~50%)I opened a third ssh: nothing. Blank Screen again. cpu-usage from ssh to 65% (overall ~75%)I issued reload from console! Nothing! it was trying to shut down!I issued reload quick-> that is when console was lost!!I have to unplug it.
The DC that was removed was also the DNS for the ASA.The only log message i could see, before it stuck was "AD Agent is out of reach".i have ttried this 4 times. Always the same. 100% reproducible.I disabled the identity firewall-> no problem! it worked for days.100% reproducable.I downgraded to 8.4.5--> the same for both above actions.
View 1 Replies
View Related
Oct 18, 2011
I'm having an issue where when I upgrade from 8.2(5) to 8.4(2) on an active/passive asa 5585 running in transparent mode I can no longer reach the standby ip. The BVI interface appears to be created properly, the device IP and standby IP are listed in the config under the BVI interface and my inside and outside interfaces are both joined to BVI1-group.
View 1 Replies
View Related
Sep 11, 2012
I have a strange behavior and a simple proble . I configured the following static route
ip route 10.84.22.0 255.255.254.0 10.84.23.254
That I advertsied in eBGP :
router bgp 65000
network 10.84.22.0 mask 255.255.254.0
the IP next hop 10.84.23.254 is cascaded on my customer LAN . At nominal time the router advertsed the route in BGP
pjnb1376#sh ip bgp nei 57.213.169.169 ad
Next Hop Metric LocPrf Weight Path
*> 10.84.22.0/23 10.84.23.254 0 32768 i
When the lan interface of the router goes down , the router still advertise the route !!! Even if the IP next hop
10.84.23.254 is not reacheable anymore ....
The box is a Cisco 1941 using
1900-universalk9-mz.SPA.151-4.M1
View 17 Replies
View Related
