I hav windows server 2003 w/ 3 clients on my home network.2 of these machines link w/ server when i formatted & try to link 3rd machine it says "A domain controller for the domain fits.local could not be contacted" this problem I have 2003 server + isa server 2004 + exchange server 2003 installed in one core i3 machine..........
View 9 RepliesI'm still having problems (as seen in 'Network Controller Not Found (Clueless!)) and have a quick query.I'm trying to locate a specific driver and so far have exhausted my search, can I get anything from the Hardware Id from the Unknown Network Controller?
View 3 Replies View RelatedI've got a Philips MT1800, Intel Core 2 Duo package. My network adapters are recognised (1394 Net Adapter, Intel Pro/1000 PM Network Connection), but in unknown Devices the 'Network Controller' drivers are not found (there was a Ralink RT2500 slot before, I'm assuming this is the missing driver??). EVEREST Home Edition recognises a Ralink RT2500 802.11g Wireless Network Adapter (PCI), and my PC finds new hardware on reboot, but it cannot find drivers at all. I've tried a few methods, such as Driver Detective etc. but don't have the original restore CD any more, so don't want to tamper with any other "out of date" drivers. I am not in a situation where I can order a restore CD, so I'm hesitant to System Restore in case something else becomes unresolvable.
View 11 Replies View RelatedAll of a sudden, my ethernet port isn't being recognized. It doesn't show up in device manager, and i get an error: "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable" when attempting to install the driver for it. i'm using the ethernet port on my gigabyte h67m-ud2h-b3 motherboard and i got the drivers from gigabyte. its as if i don't have an ethernet port it was working a few days ago but now, nada
View 2 Replies View RelatedEverything was working fine, I was able to make everything work fine. Then yesterday morning I started up my computer and it was not connected to the internet. My ethernet was plugged in and everything was as it should be. I went in to device manager and noticed that my realtek network controller was not in the device list under network adapters. I then tried to reinstall my LAN drivers from ASUS (my motherboard) which is how I got it to work in the first place. However, this time when it "finishes" installing an error pops up and says "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable."
View 14 Replies View RelatedIn my office we are using two networks , one is 16.x.x.x and another on is 15.x.x.x . 16.x.x.x having the domain controller. 15.x.x.x is only connected with Workgroup. my question is it possible to add 15.x.x.x network system into 16.x.x.x network . I tried to add but it gave error message "Domain Controller can not be contacted". Generally we cant add it into the domain i know that. is there anyway to connect the 15.x.x.x systems into 16.x.x.x domain using router in the network.
View 1 Replies View RelatedType: Error
EventID: 1054
Description: Windows cannot obtain the domain controller name for your computer network. The specified domain either does not exist or could not be contacted. Group Policy processing aborted.
Dad's work laptop (XP) will no longer connect to any wifi at all. I removed the Intel PRO/set wireless utility so it would default to windows, enabled the Wireless Zero Config. It will acknowledge the network, attempt to get an IP address from the network for 1 minute, then it rotates down to the next network SSID in queue (I have 3 SSID's in our house). When it reaches the end, it just goes back to the "Windows is not connected to any wireless networks" message.
In 2004 I had a small home network of an NT4 domain controller with a 98 client and an XP client and an NT4 workstation laptop.ll was fine with the NT4 server providing a central store and print queue for a networked laser.Over time the laptop has been replaced with a Win7 (which will access the files but really doesn't the NT4 domain.) The Win98 has died and now finally the NT4 sever has gone too.I intend to revert now to a workgroup type set-up and forget about domains (I don't need it really) My problem is if I remove my XP machine from the domain I loose all the program menu, shortcuts desktop etc. which are stored under the domain user name login.Can I retrieve these or at least look at them so I can set up the local XP administrator account with all my familiar stuff.
View 3 Replies View RelatedI've bought a new Dell N5050, first it was on Ubuntu, then I formatted my disk and now working on Windows 7. Due to that, I've lost many drivers specially for wireless and network. I've downloaded many from here, but I'm still unable to find these 2. In other words, I can't connect to the wireless connection unless I use the Ethernet cable.
here is an image, it's french.
by the way, I've downloaded a lot of drivers, I wonder why I still got these two missing. ( did I download wrong ones?)
" Controleur de réseau = Network controller"
We relocated several servers to our DMZ and, without a domain controller in the DMZ (we plan to put a RODC in the DMZ later when we mvoe to Windows Server 2008), i punch through the standard recommended TCP ports. ports 88,135, 389, 53, etc.) to the internal network located DC. I am double hopping to the DC (I hope thast doesn't matter) as the DMZ located web server communicates to another IP address in the same DMZ network and then I NAT that address to the internal IP address of the DC. Everything seems to be working for the servers we moved to the DMZ but i think i don't have all the necessary TCP/UDP ports punched through because we have found that logging into the DMZ servers is taking an extended amount of time, sitting on the “applying settings” screen. For 2-34 minutes. Also, we noticed that our applciations fols have to now add the fully qualified domain names when making calls to servers that just needed the domain name. When i open the access-list up completely without opening specific TCP/UDP ports, the issue is resolved.
View 4 Replies View RelatedI am having trouble adding a computer to the Domain Controller. I have a cable modem running into a di-524 router. The router has DHCP and DNS relay disabled. I set the LAN IP Address of the router to 192.168.2.1. The router is connected to a switch with 10 pc's and a server running 2003. The server has an IP Address of 192.168.2.2. I setup a DHCP server inside 2003 with a scope of 192.168.2.100-192.168.2.199. Under scope options the router is set to 192.168.2.1 and DNS Servers is set to 192.168.2.2 (the ip address of the domain controller). When I try to add the computer it cannot contact the domain controller. Is there something wrong with my DHCP config or DNS?
View 3 Replies View RelatedI am currently planning a Active directory deployment. It will most likely be a new forest, but the domain could become part of a existing forest. I have about 45 Computers with about 85 users. At one time there is about 42 users logging in as there is two shifts. The logons will be done all at once. Do you think two domain controllers will be able to handle the load?
View 9 Replies View Relatedo create a domain host
View 2 Replies View RelatedHow has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedI have only one PC. I use cross cable for setup Domain controller. Than network icon show available network but it is just only send and can't received.
View 1 Replies View RelatedI have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View Relatedwe have using 10 system with domain contorller connected to network once disconnect server i cant acces to local systen ( per to per )
View 1 Replies View RelatedDell Inspiron laptop n4110-6 gb RAM- 575 gb HD- intel i-5 processor 1333mhz. Win 7 -64 bit
everything was fine until yesterday...started up laptop and noticed the network connection icon in my task bar hd the "red-x" through it...i knew something was up cuz i had ethernet hardline in to my machine. after I had inspected every possible home netwrok issue...i noticed it was more pc related.now i go to my device manager to check my network adapters..... there are NONE listed...i go to "View" to find that unhide all devices and note there are only wireless drivers in this device and NOT the typical "realtek-8111E" controller that SHOULD be listed.
So far...i have done these steps
1) ensured BIOS (my cmos is phoenix tianos build) lan settings are correct- done
2) Removed RAM from slots
3) Removed Cmos Battery
4) waited for 15 minutes.it is still not working ....a i even tried a clean install of win 7 and that doesnt work?
i just reinstalled windows on my laptop and i figured i could just download drivers from the dell website. after following the installation order specified on the website.. installing first the NSS and then the chipset, etc.. I realized there wasn't a driver for the NIC on the website. i also noticed that the steps didn't include a step for ethernet drivers, so i replaced the NIC step with installing the broadcom integrated controller. unfortunately, after completing the rest of the installation steps, my Network Controller driver is still not installed (looking in the device manager), a hardwire connection through the ethernet cable gives me "limited or no connectivity" and there is no wireless capability whatsoever.
dell inspiron 6400, now running windows xp home edition with SP2
I am facing this trouble since i purchased this laptop i have a Dell vostro 2520 running on windows 8 pro X64, so the problem is that whenever i try to install drivers for Ethernet which i downloaded from the drivers and download section of this website it gives me an error "Realtek network controller was not found If in deep sleep mode please plug in the cable" now the thing is that it cannot be a problem in my windows as i was running on windows til few days ago, I got the same problem in windows 7 as well,
I have searched everywhere and i have tried almost every solution i got but to no avail the problem still persist and i cannot use LAN for Internet or file transfers,
P.S:- I looked for the adapter under the "control panel system and security system device manager Network adapters" But didn't found anything there saying Ethernet or something like that.
I am uploading the screenshots of the problem i am facing.
what i am trying to accomplish is to set up a domain for my home network. the domain is going to consist of 2 server boxes both running ubuntu 12.10 server edition and a client machine running windows XPone linux box will be my DC using samba and the other will host email, and apache2 web services.i dont know if you need all of this info but in my experience its best to be thorough.I registered a domain through godaddy.com and made it point to my home IP address. now what happens because all of my machines are behind a router is when i type in my URL it brings up the login request for the cicsco webinterface. what i would like to happen is that my router points traffic to the ip address on my home net work 192.168.1.XXX that is hosting the apache2 webserver.I would also like to connect the client(XP) machine to the domain controller but i keep getting an error that says that the domain does not exist. I have been through the samba settings and they are exactly the same as when i set them up for a mock PDC using "example.com" as a domain name
View 1 Replies View RelatedMy Primary Domain Server is down and i have to format the server. I have 2 Additional domain controllers. How do I add DC after formating the server in the same domain.
View 1 Replies View RelatedWithin ACS 5.2, does any know of a way to see which specific domain controller a request is sent to?
View 1 Replies View RelatedI try to join an ACS v. 5.3 to the domain. For my acs in Location A, I can join without problems using my account. When I try to join the ACS in location B to the same domain with the same account, it doesnt work.I looked at the debug log files for the ad client, and noticed, that the ACS in location B goes to a certain Domain Controller. However, I would have expected the ACS to contact another DC, which is located on the same location as the ACS ... this doesnt happen.
My question: How does the ACS determine what DC to contact ? Is it possible to force the AC to join by connecting a certain DC ?
We have a remote site with ~5 users, 4 IP phones and a network printer. Right now we have an old Win2003 box serving as the DC for that site. It is connected back to us via 10MB layer 3 routing on a HP 5500G-EL switch. This windows server is getting quite old and I'd like to avoid the expense of buying a new server just to hand out addresses and authenticate users. How do you all handle login authentication,dns,and DHCP for your lightweight remotes sites?
View 11 Replies View RelatedI am trying to set up the SG300-52 and am struggling, I have a domain controller with IP address 192.168.0.1 I have a broadband router that is has a dynamc ip address. I have set up vlan1 aand vlan2
Vlan1 is getting its ip address from the domain which is 192.168.0.110
vlan2 is getting its ip from the broadband router.
I have setup Domain Name System in the Ip configuration tab
on Vlan1 I have a connected a dumb switch this connects all the computers in the local network. What I cannot get to work is the internet vlan.
who has setup up vlan routing with domain controller
On our ASA5510 in the area AAA Server Groups, there is an entry for LDAP and an object that refers to our 2003 Domain Controller. This DC has LDAP over SSL enabled and I can see the DN and Password for a domain user account.I've created two new DC's, both R2 2008 but when I enable these in the same way it says it could not authenticate, ERROR auth server not responding, AAA group removed.I thought this had something to do with CA being installed on a DC, but it's not running as a service on the DC that was already referred to.
View 2 Replies View RelatedIs there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 Replies View RelatedI have a Nexus 7000 Core Switch , and i need to allow the domain controller ip 10.x.x.x for DHCP relay on switch.
View 2 Replies View RelatedI just turned on 2 Wirelless LAN Controllers 5508 and I am getting this message on both of them:
Loading primary image (Image not found)
** Unable to read "linux.pri.img" from ide 0:2 **
Loading backup image (Image not found)
** Unable to read "linux.bak.img" from ide 0:2 **
And it is taking me to the BootMenu. I selected option 4 to Clear Configuration and the controller seems to restart the system but I still get the same error. I checked the LEDs status and Sys is Amber and Alarm is OFF which according to the documentation is a System Crash.
I know that the 3600 series APs are not supported on the 4404 WLC. However, would the following scenario be supported? I would like to use the 4404 (software rel. 7.0) as a guest anchor with a 5508 (software release 7.2) as the foreign controller supporting series 3600 APs. I ask because the APs do not need to join the guest anchor.
View 7 Replies View RelatedWe have a customer that have 2 5508 as primary and backup controller and a 4400 as an anchor controller. We plan to upgrade the 5508 to 7.3.112.0 and the 4400 is already 7.0.116.0. Will there be any issue if the anchor controller is not the same code as the foreign controller? Do I also have to upgrade the acnhor controller to 7.0.240.0?
View 2 Replies View RelatedWe are trying to navigate the waters in choosing between a in-house, controller-based, wireless network solution or a cloud-based solution. We have been presented with the usual suspects in cloud-based (Aerohive, Meracki, etc) and with Cisco (5500) and Aruba on the other side. We are a multi-campus organization with approx. 200 APs.Any hard reasons why go with a controller-based vs. cloud-based solution? If we must keep the conversation limited to Cisco, why go Meracki over Cisco's WLC solutions or vise versa?
View 1 Replies View Related