How To Create A Domain Host Controller For Xp
Apr 11, 2012o create a domain host
View 2 Replies
ADVERTISEMENT
AAA/Identity/Nac :: SG 200-08 Not Working With Domain / Host-name
Oct 19, 2011we are facing a strange problem with a Cisco Small Business SG 200-08 Switch (firmware release 1.0.1.0). When configuring the switch to act as a RADIUS Client with 802.1x port security enabled, it sends the “Account Name” attribute to the radius server with max. 32 characters. The string comes in this format: host/dns Host Name and will be cut after 32 characters which will cause the NPS to say: “The specified domain does not exist.” and NPS is right. When I reduce the hostname so that host/dnsHostName <= 32 characters, authentication is working fine. And by the way, we also have a SG 200-26 in production and it can handle more than 32 characters which lead me to think of a bug in the firmware of the SG 200-08.
View 1 Replies View RelatedHost Names Duplication In Different VLAN's In Same Domain?
Dec 25, 2012I have issues with the same host name duplication in different VLAN's in the same domain.Scenario:I have 2 VLAN's named VLAN A and VLAN B.If i assign in VLAN A for one of the computer name as Comp1 it's not in the network so its accepting.in dns will be replaced with VLAN B and if i ping i can see the ip also from VLAN B.
View 18 Replies View RelatedAccessing Computer In Workgroup By Laptop In Domain Using Host Name
Jul 16, 2011I have a home computer which part of the home's workgroup and I have a office laptop which is part of a domain. Both of these are connected to the home wireless router and I can ping from one to the other via IP only and not by hostname. I have to access DB which is on my home computer (workgroup) from office laptop(domain). How do I achieve this? I search the internet and found we can enable sharing by IP. But my usecase will require access to the workgroup computer using hostname from laptop.
View 4 Replies View RelatedServers :: How To Create Domain In Windows 7
May 11, 2011i have 4 pc's. how can i create DOMAIN in windows7?
View 2 Replies View RelatedCreate A Network Between VMware And Host OS?
Jan 6, 2013how do i create network b/t vm ware and host machine ?
View 1 Replies View RelatedCisco VPN :: Create A VPN Between 2 Host With 2811 And NAT?
Jan 12, 2012I want to create a VPN between two PC's, (the server "Data" and "Remote Desktop" check the topology below), the Router Clabeck (cisco 2811 ) is connected to the internet through int f0/0 using a PPPoE connection and connects all the LAN PC's by PAT to the internet (you can see all the configurations in the Show Run below), the "Remote Desktop" is any PC with internet connection.
F0/1 F0/0
DATA--------------------SW-------------------ROUTER(Cisco 2811)---------------------INTERNET---------------REMOTE DESKTOP
192.168.1.51 192.168.1.254 201.122.53.177 192.168.1.1
Current configuration : 2116 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]....
Servers :: How To Create Virtual Network With Domain
Mar 10, 2011I am taking a college course using Microsoft Windows Server 2008 Administrator Lab Manual. The labs assume that you are in a MS lab with the ability to connect to thier domain and servers. I want to create my own virtual lab to simulate MS environment so I can follow the assignments. I have VirtualBox installed. I am a completely new to servers and networking
View 2 Replies View RelatedHow Many Bits Must Be Reallocated From Host ID To Network To Create 16 Subnets
Jun 30, 2012How many bits must be reallocated from host ID to network ID to create 16 subnets?( i did read the discussion on another page and still no clue). For the Class C network address 192.168.10.0 , which of the following subnet masks provides 32 subnets? How many host bits are necessary to assign addresses to 62 hosts ??
View 4 Replies View RelatedCisco Security :: Why Does ACS 5.1 Domain Account Must Have Permission To Create / Delete Objects
Mar 23, 2011Any detailed knowledge about Cisco ACS 5.1 and Windows AD interaction? I wonder why does Cisco ACS domain account must have permission to create/delete domain objects. This fact does really surprided me, because to my mind Cisco ACS only reads domain structure, and does not make any changes.
View 3 Replies View RelatedDomain Controller Cannot Be Contacted
Nov 18, 2012In my office we are using two networks , one is 16.x.x.x and another on is 15.x.x.x . 16.x.x.x having the domain controller. 15.x.x.x is only connected with Workgroup. my question is it possible to add 15.x.x.x network system into 16.x.x.x network . I tried to add but it gave error message "Domain Controller can not be contacted". Generally we cant add it into the domain i know that. is there anyway to connect the 15.x.x.x systems into 16.x.x.x domain using router in the network.
View 1 Replies View RelatedCannot Obtain Domain Controller Name
Jun 19, 2011Type: Error
EventID: 1054
Description: Windows cannot obtain the domain controller name for your computer network. The specified domain either does not exist or could not be contacted. Group Policy processing aborted.
Dad's work laptop (XP) will no longer connect to any wifi at all. I removed the Intel PRO/set wireless utility so it would default to windows, enabled the Wireless Zero Config. It will acknowledge the network, attempt to get an IP address from the network for 1 minute, then it rotates down to the next network SSID in queue (I have 3 SSID's in our house). When it reaches the end, it just goes back to the "Windows is not connected to any wireless networks" message.
NT4 Domain Controller Lost?
Mar 1, 2011In 2004 I had a small home network of an NT4 domain controller with a 98 client and an XP client and an NT4 workstation laptop.ll was fine with the NT4 server providing a central store and print queue for a networked laser.Over time the laptop has been replaced with a Win7 (which will access the files but really doesn't the NT4 domain.) The Win98 has died and now finally the NT4 sever has gone too.I intend to revert now to a workgroup type set-up and forget about domains (I don't need it really) My problem is if I remove my XP machine from the domain I loose all the program menu, shortcuts desktop etc. which are stored under the domain user name login.Can I retrieve these or at least look at them so I can set up the local XP administrator account with all my familiar stuff.
View 3 Replies View RelatedDomain Controller Cannot Be Found
Jul 5, 2012I hav windows server 2003 w/ 3 clients on my home network.2 of these machines link w/ server when i formatted & try to link 3rd machine it says "A domain controller for the domain fits.local could not be contacted" this problem I have 2003 server + isa server 2004 + exchange server 2003 installed in one core i3 machine..........
View 9 Replies View RelatedCisco :: DMZ Connectivity To Domain Controller / AD
Feb 16, 2012We relocated several servers to our DMZ and, without a domain controller in the DMZ (we plan to put a RODC in the DMZ later when we mvoe to Windows Server 2008), i punch through the standard recommended TCP ports. ports 88,135, 389, 53, etc.) to the internal network located DC. I am double hopping to the DC (I hope thast doesn't matter) as the DMZ located web server communicates to another IP address in the same DMZ network and then I NAT that address to the internal IP address of the DC. Everything seems to be working for the servers we moved to the DMZ but i think i don't have all the necessary TCP/UDP ports punched through because we have found that logging into the DMZ servers is taking an extended amount of time, sitting on the “applying settings” screen. For 2-34 minutes. Also, we noticed that our applciations fols have to now add the fully qualified domain names when making calls to servers that just needed the domain name. When i open the access-list up completely without opening specific TCP/UDP ports, the issue is resolved.
View 4 Replies View RelatedDNS / DHCP Domain Controller Addition
Feb 10, 2011I am having trouble adding a computer to the Domain Controller. I have a cable modem running into a di-524 router. The router has DHCP and DNS relay disabled. I set the LAN IP Address of the router to 192.168.2.1. The router is connected to a switch with 10 pc's and a server running 2003. The server has an IP Address of 192.168.2.2. I setup a DHCP server inside 2003 with a scope of 192.168.2.100-192.168.2.199. Under scope options the router is set to 192.168.2.1 and DNS Servers is set to 192.168.2.2 (the ip address of the domain controller). When I try to add the computer it cannot contact the domain controller. Is there something wrong with my DHCP config or DNS?
View 3 Replies View RelatedAD Domain Controller Concurrent Logons?
Nov 30, 2011I am currently planning a Active directory deployment. It will most likely be a new forest, but the domain could become part of a existing forest. I have about 45 Computers with about 85 users. At one time there is about 42 users logging in as there is two shifts. The logons will be done all at once. Do you think two domain controllers will be able to handle the load?
View 9 Replies View RelatedFile Server And Domain Controller?
Nov 22, 2012How has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedCisco Firewall :: Create Static PAT To Allow Host Address To Access Network Through ASA5510
Aug 23, 2012The old syntax that I am much more familiar with has been deprecated. On older IOS it would have been something like static (inside,outside) tcp 209.114.146.122 14033 192.168.30.69 1433 netmask 255.255.255.255 Plus an extended ACL to allow the traffic.I am trying to create a Static PAT to allow a host address to access our Network through an ASA. I have external address 209.114.146.122 that I want to hit the external interface on an obscure port (say 14033) and translate that traffic to an internal host address on port 1433.
View 11 Replies View RelatedUse Cross Cable For Setup Domain Controller?
Aug 11, 2011I have only one PC. I use cross cable for setup Domain controller. Than network icon show available network but it is just only send and can't received.
View 1 Replies View RelatedSQL Server Lost Connection With Domain Controller
Dec 6, 2011I have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View RelatedDomain Controller - Local Network Not Working?
May 4, 2011we have using 10 system with domain contorller connected to network once disconnect server i cant acces to local systen ( per to per )
View 1 Replies View RelatedHome Network :: Primary Domain Controller Behind A Router?
Apr 15, 2013what i am trying to accomplish is to set up a domain for my home network. the domain is going to consist of 2 server boxes both running ubuntu 12.10 server edition and a client machine running windows XPone linux box will be my DC using samba and the other will host email, and apache2 web services.i dont know if you need all of this info but in my experience its best to be thorough.I registered a domain through godaddy.com and made it point to my home IP address. now what happens because all of my machines are behind a router is when i type in my URL it brings up the login request for the cicsco webinterface. what i would like to happen is that my router points traffic to the ip address on my home net work 192.168.1.XXX that is hosting the apache2 webserver.I would also like to connect the client(XP) machine to the domain controller but i keep getting an error that says that the domain does not exist. I have been through the samba settings and they are exactly the same as when i set them up for a mock PDC using "example.com" as a domain name
View 1 Replies View RelatedConvert Additional Domain Controller After Formatting Server
Nov 15, 2012My Primary Domain Server is down and i have to format the server. I have 2 Additional domain controllers. How do I add DC after formating the server in the same domain.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ASC5.2 - How To Tell Which Domain Controller Request Is Sent
Sep 12, 2011Within ACS 5.2, does any know of a way to see which specific domain controller a request is sent to?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Force ACS V.5 To Join Domain With Certain Controller?
Sep 5, 2012I try to join an ACS v. 5.3 to the domain. For my acs in Location A, I can join without problems using my account. When I try to join the ACS in location B to the same domain with the same account, it doesnt work.I looked at the debug log files for the ad client, and noticed, that the ACS in location B goes to a certain Domain Controller. However, I would have expected the ACS to contact another DC, which is located on the same location as the ACS ... this doesnt happen.
My question: How does the ACS determine what DC to contact ? Is it possible to force the AC to join by connecting a certain DC ?
HP 5500G-EL Switch - Replacing Domain Controller With Something More Lightweight
Apr 24, 2013We have a remote site with ~5 users, 4 IP phones and a network printer. Right now we have an old Win2003 box serving as the DC for that site. It is connected back to us via 10MB layer 3 routing on a HP 5500G-EL switch. This windows server is getting quite old and I'd like to avoid the expense of buying a new server just to hand out addresses and authenticate users. How do you all handle login authentication,dns,and DHCP for your lightweight remotes sites?
View 11 Replies View RelatedDell :: Finding L502X USB 3.0 Host Controller Driver?
Oct 21, 2012I can't find the latest driver for the Renesas USB 3.0 in the Dell website. I have a Targus USB 3.0 Hub that stopped working and I am told I need to update the Host Controller driver. The driver version I have now is 2.1.27.0 dated 9/13/2011.
View 1 Replies View RelatedCisco Switches :: Internet Routing With SG300-20 And Domain Controller
Nov 27, 2011I am trying to set up the SG300-52 and am struggling, I have a domain controller with IP address 192.168.0.1 I have a broadband router that is has a dynamc ip address. I have set up vlan1 aand vlan2
Vlan1 is getting its ip address from the domain which is 192.168.0.110
vlan2 is getting its ip from the broadband router.
I have setup Domain Name System in the Ip configuration tab
on Vlan1 I have a connected a dumb switch this connects all the computers in the local network. What I cannot get to work is the internet vlan.
who has setup up vlan routing with domain controller
AAA/Identity/Nac :: ASA5510 Entry For LDAP Object That Refers To Domain Controller
Feb 14, 2013On our ASA5510 in the area AAA Server Groups, there is an entry for LDAP and an object that refers to our 2003 Domain Controller. This DC has LDAP over SSL enabled and I can see the DN and Password for a domain user account.I've created two new DC's, both R2 2008 but when I enable these in the same way it says it could not authenticate, ERROR auth server not responding, AAA group removed.I thought this had something to do with CA being installed on a DC, but it's not running as a service on the DC that was already referred to.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.1.4 Any Version With Domain Controller On Windows Server 2008 R2
Feb 28, 2010Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 Replies View RelatedCisco Switching/Routing :: 7000 Domain Controller IP To Be Allowed For DHCP Relay
May 2, 2013I have a Nexus 7000 Core Switch , and i need to allow the domain controller ip 10.x.x.x for DHCP relay on switch.
View 2 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR3600 - Create Virtual USB Port For Printer Controller In Remote PC
Feb 21, 2013Region : Hongkong
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
When using the USB printer port share function, I found that some PCs, which had never physically connect to a USB printer before, will not have the virtual USB printer port in the port selection. In this way, TP-Link's USB printer controller will not be able to setup the connection. The PC will not be able to use the shared printer from my WDR3600.how can I create a virtual USB printer port in the remote PCs (without need to physically connect a printer to them) or other method to use the shared printer?