I have issues with the same host name duplication in different VLAN's in the same domain.Scenario:I have 2 VLAN's named VLAN A and VLAN B.If i assign in VLAN A for one of the computer name as Comp1 it's not in the network so its accepting.in dns will be replaced with VLAN B and if i ping i can see the ip also from VLAN B.
View 18 RepliesIs it possible to give me NAS and Xbox 360 Host names so that they show up in my DHCP Client list? Currently there are 13 devices connected, 11 of which have a host name but these two do not. It also shows the IP and MAC addresses of each connected device.I just want to make sure that all of the devices that are connected are what I would expect.
View 1 Replies View RelatedI have been asked to do is locate some computers on the network and run a security scan on them. Well i pinged the host name and got an IP address. Then the network admin me look up the switch port that the computer is located on and so on. So i find 3 of the computers im looking for and when i get on the computer and look up the name but it does not match the name given to me. So i do an ipconfig /all and see that the computer has the right IP address and MAC address but not the same name. So my main question is, are these computers one in the same or is something messed up?
View 1 Replies View RelatedI can find ip address of any website from domains by using simple command [URL] in command prompt.I wonder how I can find the domain names from ip addresses.For e.g. I would like to know the domain names of ip - 207.232.22.200
View 7 Replies View Relatedwhere the host names do not properly resolve with the right ip address.Example, I ping a host name, it gives me an IP, but when I VNC into the workstation, it is a totally different host.
I was thrown into trying to fix a friends pc being told that the internet wasn't working.What I've found through some messing around is that I am able to pull up websites with the ip address but trying to use the domain name give a "Host Not Found". Similar error when trying to do a ping. However doing an nslookup will pull the ip's for a domain. I've done the dns flush, the netsh commands that are floating around to no avail.
View 7 Replies View RelatedRedirecting a Domain to a IP:Port I host game servers for friends and strangers alike, but i'd like to make it easier for them all and give them dedicated IPs. Right now I include domain redirecting, but to connect to their server, they have to put in "example.com:xxxxx", x meaning their servers dedicated port. Is there any way that I can redirect a domain directly to "IP:Port"?
View 3 Replies View RelatedAnyway, I am looking for a way to discover host names of Apple devices (namely iPods and iPhones) that are on our network. I've tried a number of programs like Nmap, Advanced IP Scanner, and LanSpy to name a few. All of them will report back the MAC address with no problem but no dice on resolving the host name.
My goal is to use the host name to identify the device, and ultimately the person with the device. Any thoughts on how I can go about this? Is there a setting in Nmap I'm missing or perhaps a better program to use?
I'm having with my VPN Server on my Cisco 2621xm.
I started by creating a VPN - everything worked great. I assigned the DNS Servers, Domain name, WINS Server so when I connect I'm able to resolve local hostnames on the network with no problem, however, I had no internet access... I then set up a split tunnel access list. Since I've set that up, I'm now able to ping internet based addresses url... but no longer able to resolve internal host names. I can ping the ip addresses, just name resolution no longer works. [code]
I am able to connect to corporate VPN with no issues when connecting directly to ISP modem. When I try to complete the same VPN connection via a Wireless Router (Linksys WRT160Nv3) i get the following message: "Network error. Unable to look up host names"I have tried connecting and it will initially connect, but 15-30 seconds it will drop and connection can't be re-established.Is there a setting on the Linksys WRT160Nv3 that needs to be changed?
View 3 Replies View Related I ran into a very interesting problem that occurred today and I'm trying to figure out why it happened. If it was one ASA 5505 that just required the reboot, then I'd have just chalked it up to a glitch, but when we built a new AD/ DNS server on the main network at the main site and changed the 3 Remote site ASAs to point to the new DNS server in the DHCPD options, none of them could ping any local host names to the DNS server at the main site they were now pointing too, but external host names { URL} all translated and pinged fine.
From a laptop on one of the remote sites, we could ping the new AD/DNS server(192.168.0.3) and the old AD/DNS server(192.168.0.2) and everything else at the main site, and telnet to port 53 showed successful across the Easy VPN from the Remote site to the new server at the main site. When wire shark was added to the new DNS server at the main site, the DNS request and replies for {URL}, for example, came and worked fine, but any requests for local resources never made it to the server from the remote sites.
A reboot of one of the Remote Site ASA's corrected the issue. Then I rebooted the other two remote site ASAs, and now DNS was working fine for everybody. I had also tried clearing the ARP cache on the ASAs before resorting to rebooting them. I also tried rebooting the laptop thinking the local DNS cache needed cleared before resorting to rebooting the ASAs. I'm struggling to understand why external, public host names made it through and resolved from the remote sites to the new server at the main site, but anything local failed before even reaching the new server(The new DNS server could resolve requests made by computers at the main site, but the remote sites that traverse the Easy VPN from the ASAs failed). The new AD/DNS server is the only server configured for DNS for all remote site computers.
Is any of this making sense? I'm wondering if clearing the x late or local host tables would have corrected it without having to reboot. I'm just trying to grasp the understanding here and figure out what happened.
o create a domain host
View 2 Replies View Relatedwe are facing a strange problem with a Cisco Small Business SG 200-08 Switch (firmware release 1.0.1.0). When configuring the switch to act as a RADIUS Client with 802.1x port security enabled, it sends the “Account Name” attribute to the radius server with max. 32 characters. The string comes in this format: host/dns Host Name and will be cut after 32 characters which will cause the NPS to say: “The specified domain does not exist.” and NPS is right. When I reduce the hostname so that host/dnsHostName <= 32 characters, authentication is working fine. And by the way, we also have a SG 200-26 in production and it can handle more than 32 characters which lead me to think of a bug in the firmware of the SG 200-08.
View 1 Replies View Relatedi'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View RelatedI have a home computer which part of the home's workgroup and I have a office laptop which is part of a domain. Both of these are connected to the home wireless router and I can ping from one to the other via IP only and not by hostname. I have to access DB which is on my home computer (workgroup) from office laptop(domain). How do I achieve this? I search the internet and found we can enable sharing by IP. But my usecase will require access to the workgroup computer using hostname from laptop.
View 4 Replies View RelatedThis log message is produced Catalyst4507R+E.The device is inserted SUP-7 with 3.1.0SG Image.With this log message, the device produced duplication packet of multicast. Dec 2 16:40:00.276: (Suppressed 269 times)Dup Packet Fail for Sw Port
View 1 Replies View Relatedthis is router 887, its vlan is 192.168.3.1/24. If I'd like to add a static route via different host within same vlan, rather than the router, like:
ip route 192.168.100.0/24 192.168.3.6
How can we achieve it? I tried adding it directly and failed:
(config)#ip route 192.168.100.0 255.255.255.0 192.168.3.6
%Invalid next hop address (it's this router)
I recently bought SG-300 28P to create the VLAN. My network hs 3 subnet 192.168.1.0, 192.168.2.0 and 192.168.3.0.My main net work is 192.168.1.0. I want to divide it to VLAN to eliminate the boardcast storm; especially from the domain 192.168.3.0
But I want all the devices from 192.168.1.0 to access other subnet.
i configured the VLAN810, with DHCP services, while i try to ping the host which is connected to gi 1/0/2 from my gi 1/0/1 , i can't ping the same vlan host , while i try to debug ip icmp its showing ,
C3750XB11#sh running-config
Building configuration...
Current configuration : 12053 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
[code]....
One of the ports on the 3750 stack was configured for VLAN121. It was changed to VLAN40 and the configuration saved. Both VLANs exist in the switch configuration. As soon as a host was connected (in this case, a label printer) the port VLAN reverted back to VLAN121.
View 3 Replies View RelatedCurrently the OSPF network consist of 2 segment route via static route.One is AREA 0 and another AREA 10.Both network are seperate entity, only static route to route between 2 networks.But the static route do not provide the dynamically and flexibility, I plan to run routing between 2 networks via VLAN160 and VLAN162.
I still want to manitnace it was 2 different OSPFrouting domain.Can I run OSPF with differrent OSPF porcess ID?
I'm just wondering if its possible to ping an IPv4 host using the IPv6 host assuming that the NAT64 has already been implemented?
[code]...
I have a host that can successfully connect to a PIX 515E (7.x OS) via VPN Client; however, I have no IP routing to the LAN from the remote host.The VPN IP pool works finem,The LAN default gateway is the inside interface on the PIX; the network is flat L2 behind it.The default route on the PIX points out; no other routes are defined,The VPN remote host can be pinged from LAN hosts, but the VPN remote host cannot ping any LAN host, not even the PIX inside interface.
View 2 Replies View RelatedASA 5510
Ver 8.2(5)
I have been looking all over the place for the answer of how to allow clients on an IPSEC VPN to ping from host to host.
Just planning my move to 8.4(2) and I'm looking for some input. In the past, I have a text file with name commands for every host on my network that I know about. I would then deploy this list to all ASAs so that I could create ACLs on any firewall using a name, which would correlate to the same IP on any firewall.Now, the names from the name command no longer work as a host entry in ACLs, therefore I'm required to switch all of my active name command entries over to objects.My question is, have any of you found an easy way to change all name commands to objects? Since the name command doesn't specify the mask of the entry, I think this may not be possible without manually updating thousands of records. I know that once I migrate, there will be some objects auto-created, but those will only be host and or networks which have NATs associated with them.
View 7 Replies View RelatedI have an old network with 5 computers, now one of them is damaged and i copied the file into another computer.2 computers are set to save files in a database which were in the damaged computer.how can I give to one computer two names ? - i cant change the source program to read the database from other computer..The program searches for \computer_namedatabasedatabase file.mdb (I dont want to change the the computer name because other computers search for him under the other name.
View 4 Replies View RelatedI have an issue with LMS 4.1 where the DCR names of several devices repeatedly revert to the IP address. I am trying to stage some devices for deployment. The initial 5 devices were staged and are now off-line. A subsequent set of 6 devices is on-line and accessible from LMS4.1. The device names on the off-line devices are stable. The device names of the on-line devices revert back to an IP address every day. From device management, I go in and change the display name and the host name from the IP address to an alphabetic host name. When I go back and look at it the next day, it has reverted to the IP address.
View 2 Replies View RelatedHere are two traceroutes both to 82.195.128.132. One results in the name ns1.hosting 365.ie and the other in the name mail.hosting365.ie. Why the difference? [code]
View 2 Replies View RelatedI have cisco's CUCM version System version: 7.1.5.10000-12 when I do a corporate lookup (form my 7970 I hit Directories - 5) Corporate Directory) I see all sort of accounts that have no phone extensions I.E. our windows service accounts, our administrator accounts that have no number associated with them. is there a way for me to hide them?
View 1 Replies View Related1. I have a DSL modem + wireless + router
2. I have a Vonage phone that taps into one of the LAN ports
3. I have DIR 655 router that taps into one of the LAN ports
4. I have NAS that taps into one of the DIR 655 LAN ports
5. I have Printer that taps into one of the DIR 655 LAN ports
6. I have a BD Player that connects to DIR 655 through wireless.
All my components that are tied to DIR-655 resolve through IP address. I would like to have the resolution through host name as it works with my first router (DSL Modem / Router). Identifying components with IP address is not only inconvinient in terms of reading / recognizing my components but ther could be other issues. I am not very techie on the networking side but I do have some basic knowledge.
I'm using MAC address filtering on my network, and have no problem adding new devices as and when we purchase them. However, a lot of these items such as smart phones with wi-fi, Kindles etc don't seem to have a name that identifies them on the device info page. All of our laptops and desktops are identified, but none of the phones etc. Is it possible to assign names to MAC addresses at all?
View 1 Replies View RelatedIs it possible somehow to define externally administred DNS namese in ASA 8.4 in within object groups?i know that we can use name XXX, but some idea popped up using this kind of configuration.
View 3 Replies View RelatedIn asus router model rt-n10, there is a client list when you bring up 192.168.1.1 showing names of devices also mac addresses and ip addresses. How do I add names to the list so I know which devices are using what ip etc. I have tried the advanced settings in the router to see if I can do it this way , but no luck.
View 1 Replies View Related