D-Link DIR-615 :: DDNS Error Connecting To Members.dyndns.org:80

Sep 3, 2011

Everythings works great except thee fact that my DIR-615 router

(Hardware Version: H1  Firmware Version: 8.00) logs the following error :

[SYSTEM]: DDNS error connecting to members.dyndns.org:80

View 6 Replies


ADVERTISEMENT

Linksys Cable / DSL :: WAG120N DDNS Unable To Connect To DynDNS

Mar 20, 2011

I just bought the WAG120N today, firmware version is v1.00.16. I've face a problem as subject, the following print screens show my configuration on router and DynDNS. I confirm the username and password is correct.Screen 1:
 
[code]....

View 5 Replies View Related

Cisco Switching/Routing :: Port-Channel Members On Different 3750x Stack Members?

Mar 14, 2012

i have a VSS core that has 4 downstream links to 4 stacked switches. I connected each of the 4 links to different switch in the switch stack. I then created a port-channel that combines all the links from each switch. Is there any issues associated with this setup?

View 9 Replies View Related

D-Link DIR 655 - Account Set Up At DynDns

Jun 9, 2011

I just setup an account at [URL],and I want to set it up in my router. I have a D-link DIR 655 with firmware 1.21 and when I set it up under dynamic dns it wont connect. It'll say "connecting" then disconnect right afterwards. I have my host name and log in information correct.

Is my firmware causing me this issue?

View 19 Replies View Related

TP-Link TD-W8960N / Connecting To Wireless Network Loops But No Error Message?

May 7, 2011

My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.

View 5 Replies View Related

D-Link DIR-655 :: Cannot Connect To Dyndns Domain Internally

Jul 26, 2012

ISP: comcast
Router: DIR-655
Hardware Version: B1
Firmware Version: 2.04NA

Currently, I have a machine attached to the router that has a webserver and ssh (fedora linux). The ports are successfully forwarded (in this case, tcp 80, and tcp 22), and from outside of my network I can connect. Also, I use dyndns.com to provide a domain name, instead of using my IP. The dyndns account is NOT managed by the router.The server I am trying to connect to has a reserved IP address.My problem is that from inside of my network, using the dyndns domain name, I cannot connect to my site.

View 10 Replies View Related

D-Link DIR-655 :: Built In DynDns Update Won't Work

Aug 19, 2011

I have the DIR-655 Rev B with the 2.03NA firmware and am trying to get the dyn dns feature to work.  Unfortunately it will not push the IP address to my dyndns account.  I have all the correct settings in the panel but still nothing next to the status line.I've double checked all my settings but still no joy.Any way to get dyndns to work?

View 5 Replies View Related

D-Link DIR-655 :: Router Update Wrong Dyndns Address

Mar 23, 2011

I have tried to search for an answer on the forum but I cannot find the correct answer to my issue. I'm having a problem where my dir655 updates the wrong ip adress to dyndns server. It always report 255.255.255.255. The dyndns information is all entered correctly and says "connected" in the dyndns configuration. So what is wrong with the adress update from the dir-655 to the dyndns server ? Of course I cannot use my dyndns adress since it is always at the wrong adress.

View 16 Replies View Related

D-Link DIR-655 :: Rev B. 2.00 DDNS And NTP Time Conflict?

Dec 23, 2010

Hooked up this router the other day to replace my old Linksys G - which has been bulletproof for 8 years. I am now wondering if I made a mistake with this unit.

I set up DDNS - after much trial and error with dyndns it now works fine.I tried to set up NTP time function - does not work. Then I set time manually. Of course on reboot it looses the time since there is no internal time function. So I need NTP.In the course of troubleshooting I turned off DDNS and behold the NTP time function now works. I turn DDNS back on and NTP does not work.

I see no logical connection between these two functions, yet the seem to interact (or not) somehow.When the NTP is not working, on reboot the time displayed in the router is the last time that I MANUALLY set the time, even though that is grayed out since I have (supposedly) activated NTP.

If I do NOTHING to NTP and uncheck DDNS, after reboot the time is correct.I tried many different NTP servers all with the same result.Looking back on-line, I see the NTP function has been a continual problem with some folks (maybe those using DDNS?) in earlier firmware. Come on DLINK don't you think it's time to get this fixed?

View 6 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 Port Forwarding For DynDNS?

Dec 18, 2012

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 build 120810 Rel.44064n
ISP : BT infinity

I'm trying to portforward on my WDR4300 to use Dyndns to view my Dreambox outside of my home network.I can not seem to forward ports, is there a guide to port forwarding for this router.basically I want to forward port number 12000 to my dreambox with local ip 192.168.0.101 ( with dyndns representing 192.168.0.101)

View 7 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961NB / How To Add Other DDNS Providers

Jan 12, 2013

Region : Germany
Model : TD-W8961NB
Hardware Version : V1
Firmware Version : 1.0.0 Build 110707 Rel.32779
ISP : DTAG

would it be possible to add other DDNS providers to the router menu?E.g. I use dnsomatic.com as DDNS service (pretty much the same syntax/protocol as DynDNS, but free and more flexible).

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: Ddns Used Behind TD-W8970 Is Not Working

May 4, 2013

Region : Others
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :

I just set up DDNS for my home, and also set forwarding port 5000 for my NAS with an specific IP address 192.168.1.xx. Then, I use my office Internet to call DDNS xxx.dyndns.org:5000 to connect the NAS in my home, It is working OK (from outside to home) However, if I call xxx.dyndns.org:5000 by my home Internet, it is not working (from inside home to home). But if I directly call NAS' IP address 192.168.1.xx:5000, it is OK to reach it. So I think, DDNS used behind TD-8970 (inside home) is not working. TD-9870 is not forwarding port.

I don't know what do I miss in setup this WD-8970.

My previous Zyxel wireless router modem can allow me to us DDNS behind it with out any extra setting. Is it possible that there is still some bug in Firmware of this TD-8970?

View 4 Replies View Related

D-Link DIR-655 :: Can't Seem To Make DDNS Setting Stick In Router

Mar 8, 2013

I just had to get rid of a bad DIR-825 that I replaced a trusty old DIR-655 with and now I'm back.  Anyhow, I can't seem to make the DDNS setting stick in the router.  All of the information is correct, but it doesn't seem to want to login.  When I click the enable check box, it tries connecting and then greys out and doesn't connect.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N / How To Test Routers Ddns

Jan 30, 2013

Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.54317n
ISP : century link

How do I test my routers ddns? My computer went down. So, my adsl ip address changed. I caused the modem/router to reboot. But the new ip wasn't sent to the Host (dyndns.org). I had to update my ip manually on [URL].

View 2 Replies View Related

D-Link DCS Network Camera :: 910 - Way To Access A Camera Without Using Dyndns?

May 11, 2012

I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question.  The smartphone works fine locally with wifi and has a browser available.

The real question I have is what is the easiest way to access any camera via a browser from a remote location.  Years ago tech friend assisted me access my DCS-910 using dyndns.org.  It was free and worked great.  I guess it went away when they started charging for a basic account.

Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name?  I would just like to see at least one of my cameras in a browser off-site.  If I have to pay $20/year for dyndns I can but I would prefer not to if possible.

View 2 Replies View Related

Cisco Wireless :: CT5508 / RF Group Members Not Seeing Each-other

Nov 28, 2011

I've two wlc model CT5508 version 7.0.116.0. They are working fine except for the RF grouping part. When I look at the RF Group members part in the configuration, I can see only one wlc (the one I'm connected to). If I connect to the second one, in the same part, I've just one controller (so the second one..). I tried to restart the algorithm but no change. Each controller is configured with Group Mode set to auto, and their respective role are auto-leader...I tried to change the  RF group name on both wlcs, but it didn't fix the problem. When I look at the logs, there is one which appear quite often:
 
*emWeb: Nov 29 10:32:07.764: %LOG-6-Q_IND: dtl_arp.c:2581  ARP input q exceeds limit. Current val = 50 [...It occurred 38 times.!]

View 2 Replies View Related

Cisco :: How To View Pickup Group Members In CUCM 8.0

Jan 15, 2013

bit of a newbie to this call manager stuff but I was having a bit of a play earlier and for the life of me I can not see an easy way to list which directory numbers are in a particular pickup group. I can see the list of pickup groups and how to assign the directory number to a pickup group but surely there's an easy way to find out which numbers are in a particular pickup group???

View 1 Replies View Related

Cisco :: Catalyst 2960 Unable To Add Members To Community

Mar 27, 2013

I try to add a  Catalyst 2960 to Cisco Network Assistant, I get the prompt for password but I get a "Authentication failed". I use the same login / password for telnet that works fine. Http admin page is reachable but I cannot login with the "admin" account.

View 2 Replies View Related

Cisco Switching/Routing :: Nexus 2248 Maximum VPC Members?

Apr 10, 2013

I have a pair of 2248 Fex's where I'm currently terminating several VPC's to the servers, each with one port per Fex. Is it possible to run a VPC to a server with 4 ports, i.e 2 ports per Fex? I saw some discussions indicating it wasn't possible on a 2148 Fex, but would be on the 2248. The ports will just a dot1q trunks

View 1 Replies View Related

Cisco Switching/Routing :: 2960 S - Stack Of 4 Unable To Console From Members?

Sep 10, 2012

I have stack of 2960 S  switches.I can console only from Master not from memember switches is this default behaviour?

View 1 Replies View Related

Cisco Switching/Routing :: 2960S How To Upgrade Stack / Then Reboot Members One By One

May 15, 2013

I have 2 Catalyst 2960S-switches configured in a stack. The uplink is configured as a cross-stack etherchannel. Now I want to upgrade the stack with a minimum of downtime for the connected hosts. The hosts are connected to the stack via cross-stack etherchannels. So my question is: How can I upgrade the stack and reboot the members with a minimum of downtime? If I use the archive download-sw command with the /reload-option, the stack is reloaded and the result will be downtime for the hosts while th stack is reloading. Is it possible to upgrade the stack and then reboot the members one by one in a controlled manner?

View 8 Replies View Related

Cisco Switching/Routing :: Can't Connect To Console On 3750X Stack Members

Oct 23, 2012

I have a 3750X stack of 6 switches, I have a terminal server console server plugged into the console ports of all 6 switches. I am having a strange issue where I can connect to the master via the console, get a login prompt then I can log in, but when I try and connect to any of the members then I get a prompt "Press RETURN to get started" When I push return, it just loops back to the same prompt again:
 
switch-6 con0 is now available
Press RETURN to get started.
 
switch-6 con0 is now available
Press RETURN to get started.
 
I can connect to the stack via SSH fine etc. I am running 15.0(1)SE2. The stack is configured for TACACS+ auth via Cisco ACS.
 
Switch#  Role   Mac Address     Priority Version  State
----------------------------------------------------------
*1       Master f0f7.55ba.2700     15     1       Ready              
2       Member f0f7.5541.da00     14     1       Ready              
3       Member a493.4c1e.4b80     13     1       Ready              
4       Member f0f7.5585.cb80     12     1       Ready              
5       Member a44c.1120.8e80     11     1       Ready              
6       Member a493.4cc0.fa80     10     1       Ready     

View 4 Replies View Related

Error 718 In Net - Connecting Slow Suddenly?

Jan 30, 2012

my net is connecting so late after a sudden hang in windows, and sometimes showing Error 718..It has become very often...I asked my friends (same connection), they are not having any problem from the ISP... what's wrong? :/ Few minutes ago, it was showing error 718, i had to restart, and then it connected (still slowly).

Core2Duo, Dg41Rq, @2.93Ghz, 2Gb DDR2, 500Gb HD, avast free, Ethernet connection braodband PPPoE via landline.

View 1 Replies View Related

Cisco VPN :: 5510 Getting Error While Connecting From VPN

Dec 31, 2011

I have an 5510 ASA with 804 IOS. In that installed anyconnect (anyconnect-win-2.0.0343-k9.pkg) version. But when i am going to connect it from https:// I am getting the below error. So as a work around i tried to install anyconnect-win-2.5.6005-pre-deploy-k9.msi at my laptop and try to connect from https:// i am able to connect.

View 4 Replies View Related

Cisco Switching/Routing :: Show Inventory Not Showing All Members In 3750-stack?

May 1, 2012

I notice that show inventory not showing all members in a 3750-stack after we merged two stacks. Its only showing the master of the new stack, and the previous master of the old stack.

View 3 Replies View Related

Broadband :: Cannot Connecting Wireless To Desktop - Error 769

Jan 22, 2012

the specified destination is not reachable. connecting error 769

View 2 Replies View Related

Cisco :: CSM 4.0 Error Message When Connecting Client

Sep 5, 2012

tying to connect CSM client to CSM server (ver 4.0) and getting attached error message. The server is running, no errors reported while installation, all services are up and fine. I tried to install client locally on the server and connect it that way with no luck. CSM server runs on Win 2008, firewall disabled.

View 0 Replies View Related

Cisco VPN :: Client Error Connecting To ASA 5505

Apr 12, 2011

I am unable to connect to the vpn I set up on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 are below.
 
LOG CISCO VPN CLIENT
Cisco Systems VPN Client Version 5.0.06.0160
Copyright (C) 1998-2009 Cisco Systems, Inc. All Rights Reserved.

[Code]......

View 2 Replies View Related

Cisco :: After Connecting VPN Giving Connection Timed Out Error?

Jul 24, 2011

I had been working on our client servers through Cisco VPN using internet datacard. But from past 3 weeks after logging into Cisco VPN using my username/password, when I try to connect to any of the servers, it is giving connection timed out error.

Whereas, my team members across other locations are able to connect to the servers using my VPN username/password.

I thought there might be some issue with my laptop or internet datacard. I got my laptop formatted, even tried out with fresh new laptops & new internet datacards, but the issue remains same.

I have tried using vpn_5.0.06.0160-k9 & vpnclient-5.0.05.0290-k9 to connect but issue did not get resolved.

View 4 Replies View Related

Error Occurred While Connecting To Network Path Was Not Found

Sep 3, 2012

I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.

View 1 Replies View Related

Cisco :: Error Connecting WET200 To Wireless Controller?

Aug 8, 2012

I'm having a problem with a cisco bridge WET200 we have a medical equipment whit fixed IP and it has to connect to a wireless network ... and for that I set up the wireless network ... in this bridge but the equipment is not communicating with the gateway, with nothing!WLC always appears the following error:
  
WiSM-slot9-1) >debug client XX:XX:XX:XX:XX:XX 
(WiSM-slot9-1) >*apfReceiveTask: May 23 12:03:27.953: XX:XX:XX:XX:XX:XX Deleting mobile on AP XX:XX:XX:XX:XX:XX(0)
*apfMsConnTask_0: May 23 12:04:11.109: XX:XX:XX:XX:XX:XX Adding mobile on LWAPP AP XX:XX:XX:XX:XX:XX(0)
*apfMsConnTask_0: May 23 12:04:11.109: XX:XX:XX:XX:XX:XX Association received from mobile on AP XX:XX:XX:XX:XX:XX
*apfMsConnTask_0: May 23 12:04:11.109: XX:XX:XX:XX:XX:XX 0.0.0.0 START (0) Changing ACL 'Guest' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_0: May 23 12:04:11.109: XX:XX:XX:XX:XX:XX Applying site-specific IPv6 override for station XX:XX:XX:XX:XX:XX - vapId 5, site 'default-group', interface

[code]....
 
i have test command config network ip-mac-binding disable but It does not connect....when I do the troubleshooting mac-client, the system always shows authentication error even though it is okay configured?

View 2 Replies View Related

Cisco :: Error Connecting WET200 To Wireless Controller

May 22, 2012

I'm having a problem with a cisco bridge WET200.we have a medical equipment whit fixed IP and it has to connect to a wireless network ... and for that I set up the wireless network ... in this bridge [code] but the equipment is not communicating with the gateway, with nothing!
 
when I do the troubleshooting mac-client, the system always shows authentication error even though it is okay configured

View 1 Replies View Related

When Connecting Internet Through Samsung C5212 Phone It Shows Error 628

Mar 3, 2011

when i connecting internet through my samsung c5212 phone it shows error 628.the remote computer terminate the connection

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved