I just setup an account at [URL],and I want to set it up in my router. I have a D-link DIR 655 with firmware 1.21 and when I set it up under dynamic dns it wont connect. It'll say "connecting" then disconnect right afterwards. I have my host name and log in information correct.
Is my firmware causing me this issue?
How to successfully configure and connect to a DynDNS account with RVS4000? This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.I am trying to connecting to DynDNS.org service. In the past, I used the following string for the Hostname which worked:'mysubdomain.domain.com&system=custom' (including small quotes)According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.
View 2 Replies View RelatedISP: comcast
Router: DIR-655
Hardware Version: B1
Firmware Version: 2.04NA
Currently, I have a machine attached to the router that has a webserver and ssh (fedora linux). The ports are successfully forwarded (in this case, tcp 80, and tcp 22), and from outside of my network I can connect. Also, I use dyndns.com to provide a domain name, instead of using my IP. The dyndns account is NOT managed by the router.The server I am trying to connect to has a reserved IP address.My problem is that from inside of my network, using the dyndns domain name, I cannot connect to my site.
I have the DIR-655 Rev B with the 2.03NA firmware and am trying to get the dyn dns feature to work. Unfortunately it will not push the IP address to my dyndns account. I have all the correct settings in the panel but still nothing next to the status line.I've double checked all my settings but still no joy.Any way to get dyndns to work?
View 5 Replies View RelatedI have tried to search for an answer on the forum but I cannot find the correct answer to my issue. I'm having a problem where my dir655 updates the wrong ip adress to dyndns server. It always report 255.255.255.255. The dyndns information is all entered correctly and says "connected" in the dyndns configuration. So what is wrong with the adress update from the dir-655 to the dyndns server ? Of course I cannot use my dyndns adress since it is always at the wrong adress.
View 16 Replies View RelatedEverythings works great except thee fact that my DIR-615 router
(Hardware Version: H1 Firmware Version: 8.00) logs the following error :
[SYSTEM]: DDNS error connecting to members.dyndns.org:80
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 build 120810 Rel.44064n
ISP : BT infinity
I'm trying to portforward on my WDR4300 to use Dyndns to view my Dreambox outside of my home network.I can not seem to forward ports, is there a guide to port forwarding for this router.basically I want to forward port number 12000 to my dreambox with local ip 192.168.0.101 ( with dyndns representing 192.168.0.101)
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
Region : Argentina
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP :
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : www.ownit.se
I recently got a new email provider with a webmail. But I can not access the email from my home network. I have tried both my computers so I suspect that it can have something to do with my router. I have also set up the new email account in Outlook and in other networks it works fine, also the webaccess works fine in other networks. It seems that the problem is only related to my home network.i have talked to my ISP provider and they say that all is opened in there network. i have tried to clone the MAC address and that did not solve my problem. I also read the one could change the MTU size from default 1500 to 1440, that did not work either.
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : 0.6.0 1.0 v0001.0 Build 130108 Rel.54595n
ISP : TPG
RE: Voice SIP Account Phone Number Not Accepting 2 Characters My ISP TPG VoIP SIP account phone number is my TPG username rather than an actual normal telephone number. When I enter my 2 characters TPG username 'xx' as my TPG VoIP SIP account phone number as the 'Phone Number' field in the 'Voice - SIP Account' modem router management page on the LAN IP 192.168.1.1, then I press the 'Save' button, I encounter the error message "The length of 'Phone Number' is out of range[3,32]."I believe this error is due to my TPG SIP account Phone Number’ is not within the TD-VG3631 ‘Phone Number’ character length range from 3 to 32 inclusive.My old modem can register to my TPG VoIP account successfully with my TPG username 'xx' as the VoIP SIP account phone number.
I have contacted my ISP TPG and tried to get an actual VoIP SIP phone number. However, TPG does not provide an actual VoIP SIP phone number to their customers. TPG states I should use my TPG username as my VoIP SIP account phone number. They ask me to contact TP-Link to resolve the aforementioned error.Is there a way I can enter only 2 character TPG username as my VoIP SIP account phone number in the browser management page of the modem router? i.e. workaround, request TP-Link for a new firmware fix or else?
I have set-up an hotmail account (email box checked) as follwos but do not receive any eamil after the camera has recorded a new clip:
Recipient: [URL]
User name: same as above
Passowrd: my hotmailpassword�
Port: 587 (did try with 25; not better)
SSL/TLS
Sender email: An other email address as above
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version :
ISP : Engin
i purchased this new modem TD-VG3631 to replace my old one, Finished the internet configuration, it's ok, i can go to internet smoothly. however when i configured the voip function, i encountered a big problem, even i have entered all info which provided by Engin into your modem, it doesn't work. the status always down..Very sure it is not my account problem, because if i enter these info into my old modem , it works very well.
[code]...
Today we got our new VDSL internet connection and had to get a new router, which supports VDSL as our old one didn't.We have a small FTP enabled network hard drive (LaCie Cloudbox). With the old router it worked just fine. I configured the new router exactly as the old one, but something isn't right: I cant connect to the FTP server from the outside.I configured the NAT rules to open the FTP port 21 and configured dyndns on the new router also. On the old router all I needed to do to get it to work was configure dyndns and open port 21. However this doesn't work on the new one and I have no clue what the problem could be.I tried reaching it via its domain name and also tried the public ip address but none of them worked. The Network disk is connected to the new Router the same way as it was connected to the old one. The only thing that has changed is the new router. So the problem must lie somewhere in my configuration, as I havent touched anything else.
View 13 Replies View RelatedI have a PC attached to a standard 192.168.1.1 router with port forwarding turned on. The PC has an IP of 192.168.1.10 and I have Port 3389 (RDP) on the router forwarded to that PC's internal IP.
I currently have a DynDNS hostname, example.dyndns.org, and I type that into MSTSC (remote desktop) whenever I'm traveling.
But, is there a better way of doing this? The IP of the PC is not static, but it rarely changes. I do have a domain registered with GoDaddy and have full access to DNS records.
I recently moved out of state and have been working remotely. I just got a new internet provider who will not let me connect to my office VPN without a small business account which is ridiculous. I've been reading up on how to work around this and haven't been able to figure anything out. I've signed up for a dynDNS account but the truth is I have zero experience with this and don't know what I'm doing - most of the stuff I'm reading is a foreign language to me. I can log into my router and change settings and I can get VPN info from my tech person and work so I just need to know what to do. I can't really work effectively without access to my network but I refuse to pay for a small business account
View 5 Replies View RelatedTrying to set up remote access to webcam. Signed up with dyndns.org for Hostname, but when I try to set up the DDNS Service Settings in the webcam firmware it continually gives 'Bad reply from server' and I'm pretty clueless when it comes to networking! As far as I can see it requires a User name and Password plus the newly acquired Hostname as shown [URL]
View 7 Replies View RelatedI have a SR520 where WAN configured as PPPoE with Dyndns address. I have done all the configuration through the CCA, so far everything is working fine. But now i want to configure SSL VPN, but I have getting an error message : SSL VPN cannot be configured, please configure wan interface using a static IP address. Is there any way that I can configure the ssl vpn through a dyndns address?
View 5 Replies View RelatedI want to configure a remote VPN for our clients on Cisco ASA 5510 using Dyn DNS as I dont have static IP address.
View 9 Replies View RelatedThe local router is behind a fiber firewall/router; the rvs4000's ext ip is thus 192.168.1.2, not visible from the net. The firewall/router is a dyn ip, with a dyn dns name mapping to it. The remote (some NetGear thing) is also dyn dns, but it is not behind a firewall.
I want to cook a vpn from the local lan subnet to the remote lan subnet.
It worked fine when both ends were NetGear.
I think it would be ok if somehow I could thell the rvs4000 that the local Security Gateway Type be just FQDN; it can't be IP+FQDN because the remote end doesn't know anything about that kind of thing; it can do IP or FQDN or a couple other confusing things.
I am using DynDNS in lieu of a static ip. My ISP changed my WAN ip last night as expected however the RV180W did not update the WAN ip, and so the router is now offline. Using a secondary internet connection I have logged into DynDNS.com and checked my hosts file and confirmed the ipa has not updated since March. I changed the update period from 360 to 2 so this never happens again, but I need to now change the WAN ipa in the RV180W to match the new one. I remember a screen that shows the current WAN ip address greyed out under the present one, but I dont recll where to go to get to that. I am at a loss as to where I go in the RV180W to change the WAN ip address.
View 1 Replies View RelatedI am trying to have the RV220W router auto-update the dyndns registration. The dynamic domain that I use is .info -- note the .info domain.
When I manually update the dyndns information (username and password) the registration does go through and the entry is updated on the dyndns site.
However, the registration does not auto-update after that.
I just bought the WAG120N today, firmware version is v1.00.16. I've face a problem as subject, the following print screens show my configuration on router and DynDNS. I confirm the username and password is correct.Screen 1:
[code]....
I'm currently running a BEFSR41 V3 router with firmware version 1.05.0 It seems that there is no update retry if the dyndns server is temporarely unavailable. Is it possible to initiate an update via command line or is a new firmware update available to solve this issue?
View 1 Replies View RelatedI just bought the WAG120N , firmware version is v1.00.12, but it seems it has a problem with the device here.I have to turn off the system / device every time i want to get my dynamic ip update into dyndnds.org , it cant auto update the new dynamic ip.What problem that cause somethin like this?I already upgrade the firmware into 1.00.16 , but it didn't solve the problem.
View 1 Replies View RelatedI have to buy a VPN router. I'm thinking in the BEFVP41L . The problem is that in to sites to connect the VPN tunnel I have dynamic IP. It's possible to configure this router using DYNDNS domain?
View 1 Replies View RelatedFrameware version: 1.0.03.
Environment: Internet (external IP say 24.x.x.x) ISP provided modem+router (192. 168. 1.x/ 24 IPTV network) E4200 (192.168.0.x/24 my home network).
The DDNS option page did report update succefully and shown the external IP address correctly on the page, however when I login to dynDNS it shows 192.168.1.x, which is the E4200 IP dhcp from the ISP's router.I know that it's double NAT, but the 192.168.1x/24 subnet is the IPTV subnet, and my old Dlink router did support and update the dynDNS entry properly.
Is there a way to get notifications (emails) when the external ip changes and the rotuer updates dyndns?i need to get an email about this change of ip. The only constraint is it has to work without a computer attached to the router as it would have to be powered on 24/7 So ip change notifiers like trueip or ipcheck won't work as they are programs that run in a computer.
View 9 Replies View RelatedI've got two RV082's connected. Each has a dynamic IP (changes typically every few weeks). I've configured the tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "Dynamic IP + Domain Name(FQDN) Authentication".If I look at the VPN Summary tunnel status, it shows an IP address of "mydomain.dyndns.org 0.0.0.0" under the "Remote Gateway" column heading. The Tunnel Test "Connect" button is N/A.I can resolve both of the mydomain.dyndns.org entries on both sides of each VPN using the Diagnostic DNS lookup tool within each router. If I hardwire a fixed IP address for the Local and Remote Gateway everything works just fine. VPN is good.
I just can't seem to get the "mydomain.dyndns.org" function to work. It appears the router can't resolve the dynamic IP from the domain names on each of the routers.
I have two site with SA540 Site A:- i have a public Ip x.x.x.x with Lan ip 192.168.0.1 Site B :- i have Broadband router with dyndns to which SA540 is connecte with WAN Ip 192.168.1.1 The lan ip 192.168.2.1.which ports to fwd on broadband router to SA540.
View 4 Replies View RelatedWhat is my isp account number
View 2 Replies View Relatedin our university we have internet account that allows us to use till 100Mb per a week.how can I use internet without account?
View 1 Replies View RelatedSomeone tricked me by sending false email and gained control of my email address. I tried to log on and change my password but I cannot. How can I regain control. I am not experienced with computers. I would also like to learn more about computer basics to start.
View 2 Replies View Relatedfor two days it will not let me sign into my hotmail account...also two days ago got popup for adobe X?? it would not go away, so I accidently said yes, when it wanted to load onto my computer, I did get it off my computer, but, it keeps popping up and now I cannot get into my personal hotmail account.
View 1 Replies View Related