D-Link DIR-655 :: Cannot Connect To Dyndns Domain Internally
Jul 26, 2012
ISP: comcast
Router: DIR-655
Hardware Version: B1
Firmware Version: 2.04NA
Currently, I have a machine attached to the router that has a webserver and ssh (fedora linux). The ports are successfully forwarded (in this case, tcp 80, and tcp 22), and from outside of my network I can connect. Also, I use dyndns.com to provide a domain name, instead of using my IP. The dyndns account is NOT managed by the router.The server I am trying to connect to has a reserved IP address.My problem is that from inside of my network, using the dyndns domain name, I cannot connect to my site.
View 10 Replies
ADVERTISEMENT
Mar 12, 2011
I have to buy a VPN router. I'm thinking in the BEFVP41L . The problem is that in to sites to connect the VPN tunnel I have dynamic IP. It's possible to configure this router using DYNDNS domain?
View 1 Replies
View Related
Jun 9, 2011
I just setup an account at [URL],and I want to set it up in my router. I have a D-link DIR 655 with firmware 1.21 and when I set it up under dynamic dns it wont connect. It'll say "connecting" then disconnect right afterwards. I have my host name and log in information correct.
Is my firmware causing me this issue?
View 19 Replies
View Related
Aug 19, 2011
I have the DIR-655 Rev B with the 2.03NA firmware and am trying to get the dyn dns feature to work. Unfortunately it will not push the IP address to my dyndns account. I have all the correct settings in the panel but still nothing next to the status line.I've double checked all my settings but still no joy.Any way to get dyndns to work?
View 5 Replies
View Related
Mar 23, 2011
I have tried to search for an answer on the forum but I cannot find the correct answer to my issue. I'm having a problem where my dir655 updates the wrong ip adress to dyndns server. It always report 255.255.255.255. The dyndns information is all entered correctly and says "connected" in the dyndns configuration. So what is wrong with the adress update from the dir-655 to the dyndns server ? Of course I cannot use my dyndns adress since it is always at the wrong adress.
View 16 Replies
View Related
Sep 3, 2011
Everythings works great except thee fact that my DIR-615 router
(Hardware Version: H1 Firmware Version: 8.00) logs the following error :
[SYSTEM]: DDNS error connecting to members.dyndns.org:80
View 6 Replies
View Related
Nov 30, 2011
I recently moved out of state and have been working remotely. I just got a new internet provider who will not let me connect to my office VPN without a small business account which is ridiculous. I've been reading up on how to work around this and haven't been able to figure anything out. I've signed up for a dynDNS account but the truth is I have zero experience with this and don't know what I'm doing - most of the stuff I'm reading is a foreign language to me. I can log into my router and change settings and I can get VPN info from my tech person and work so I just need to know what to do. I can't really work effectively without access to my network but I refuse to pay for a small business account
View 5 Replies
View Related
Dec 18, 2012
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 build 120810 Rel.44064n
ISP : BT infinity
I'm trying to portforward on my WDR4300 to use Dyndns to view my Dreambox outside of my home network.I can not seem to forward ports, is there a guide to port forwarding for this router.basically I want to forward port number 12000 to my dreambox with local ip 192.168.0.101 ( with dyndns representing 192.168.0.101)
View 7 Replies
View Related
Mar 20, 2011
I just bought the WAG120N today, firmware version is v1.00.16. I've face a problem as subject, the following print screens show my configuration on router and DynDNS. I confirm the username and password is correct.Screen 1:
[code]....
View 5 Replies
View Related
Aug 14, 2011
How to successfully configure and connect to a DynDNS account with RVS4000? This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.I am trying to connecting to DynDNS.org service. In the past, I used the following string for the Hostname which worked:'mysubdomain.domain.com&system=custom' (including small quotes)According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.
View 2 Replies
View Related
May 11, 2012
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
View 2 Replies
View Related
Oct 8, 2011
I have an ASA 5510 with its inside network connected to 10.102.247.0/24, interface 10.102.247.1. With the inside network i have got a router 10.102.247.42 routing to 172.16.30.64/255.255.255.240. The hosts in the network 10.102.247.0/24 have got as default gateway the asa 10.102.247.1.
Now the issue is that the hosts 10.102.247.0/24 cannot ping the hosts in the 172.16.30.64 network, only the ASA interface 10.102.247.1. I have added on the ASA route inside 172.16.30.64 255.255.255.240 10.102.247.42
i have added
same-security-traffic permit intra - interface
But nothing, I have tested one host in the 10.102.247.0/24 by adding a static route 172.16.30.64/255.255.255.240 to 10.102.247.42 and it is working fine.
So the ASA is not routing internally, Is there anything i can do, maybe NAT issue, nat(inside, inside) 10.102.247.0 10.102.247.0 net mask 255.255.255.0
View 1 Replies
View Related
Aug 13, 2012
what happens internally when no shut command is given on the interface of router.The router interface goes up. How? What happen internally on the interface of the router?
View 8 Replies
View Related
Sep 30, 2011
I found that the domain name was hosted at enom.com and the email was gmail. The web servers are both Media Temple servers.we updated the settings on the new server using google's instructions. However, it is still not working properly. So, to be as clear as possible, here is the specifics:
Email from the outside works fine, Email internal to external works fine, email internally (from one emplyee to another internally) will bounce giving a 550 error. After researching this error, I found that several people have had this issue, however, the majority of the fixes didn't work.
View 3 Replies
View Related
Aug 26, 2012
I've finally set up our RV220W to serve our office network, using the following environment:The WAN is set to a public IP (static configuration), while the internal network consists of two VLANs.VLAN 1 is connected to the cabled network and one wireless SSID, where DHCP is served by our Windows SBS server (192.168.15.x), and this VLAN is used only for our own office. VLAN 2 is connected to a second wireless SSID, where DHCP is served by the RV220W itself (192.168.17.x), and this VLAN is used for guests and visitors to our office.
On a regular basis, we need to use a mobile device to access a test page from a development server on VLAN 1, and the router is configured to redirect connections on a specific port on the public IP to our development server.For VLAN 1, I solved this by overriding DNS for the hostname of this test page to use the local IP for the development server.However, for VLAN 2, there is no way to access this test page.
Is there any way I can configure the router to either redirect these connections, or override the internal DNS so the test page on the development server can be reached also from VLAN 2 (the guest/visitor network)?
View 5 Replies
View Related
Oct 6, 2011
A couple of users on my network complain about timeouts. They access the same server which runs a SQL server. People from outside world can access it without a problem but internally it keeps timing out. I have also noticed that VoIP phones have a delay internally. So if i pickup my phone and dial an extension the other person can't hear me sometimes but i can hear him.
I have experienced the VoIP problem but have never had any time outs on my machine. I tried packet capture on a couple of computers but i cant see anything out of the ordinary. Alot of ARP, some STP which i think shouldn't reach the machines, dropbox traffic etc.
View 2 Replies
View Related
May 10, 2012
i got an ea2700 and i cant get the external to work internally which i need for server tests now this has worked before on every other router i had without any editing done but this one doest allow that so what can i do to make it work with this router?
View 9 Replies
View Related
Sep 17, 2012
Accessing exteral address internally.
I have a mail server, with external access which works fine for external access thorugh our router (a 1941). I have a laptop which connects to a wireless network that is inside our router. When attempting to navigate to the webmail or use outlook, it cannot connect.
The laptop is configured to access the mail through the external path as it would be offsite occasionally.
I think the problem seems to be that the traffic is not leaving the router to come back internally. The laptop can ping the external address ok.
I read about something called hairpinning - is this what i need to be looking at?
View 3 Replies
View Related
Mar 15, 2011
Will I break anything if I create a second IP address on the physical external interface of our ASA 5510? I want to point it nowhere internally but want an active interface that can be vulnerability scanned but won't lead anywhere internally.
View 9 Replies
View Related
May 23, 2011
I have 60+ website domains to allow on my network using Website Fitering. Is it possible to expand it or is there another router out there that has a large amount of domain allowing or blocking?
View 1 Replies
View Related
Nov 21, 2012
I have the DIR-655 (H/w Ver B1, F/W Ver 2.05NA) set up as router on my network (TWC/RR - modem is Motorola SURFBoard 6121 - modem only, no router or other services provided). I have configured the router sufficiently to allow all computers on the local network to access the Internet, and have configured the DHCP server on the router to provide IP addresses to the local network. I have configured the router to provide the DNS addresses for my local DNS resolvers (so that I can provide DNS resolution for an "internal" domain). Configuration specifics available on request, but everything mentioned so far is working satisfactorily, at least so far.
So, my question: The "Local Domain Name" setting on the router, as indicated in the documentation, provides a connection-specific domain name when DHCP supplies an IP address to the local system. This setting, however, is overridden if the ISP provides a domain name when it assigns an IP to the WAN connection. I have verified by experiment that this is true (no matter what I put in the Local Domain Name field - whether a valid domain, or blank - the local machines receive the domain name supplied by the ISP.I wish to modify this behavior. I wish to have the router provide the domain name specified in the Local Domain Name field *regardless* of what the ISP provides.
View 6 Replies
View Related
Jul 1, 2012
I am working on adding a mapping to our external address for our mail server - let's call it mail.example.com
I would like to be able to access mail.example.com internally for our user's smartphones - if they access our company WiFi they are not able to get mail using the mail.example.com as the server name in their phone setups. However, once they leave the office and use any other WiFi it works fine. Also, I am unable to ping that address from any internal device. I believe also this is the reason Exchange accounts do not work on our site to site VPN connections.
I have a ASA 5520 and work primarily in the ASDM 6.4 to do configurations in the main office and have 5510 in our site to site connections.
View 6 Replies
View Related
Dec 2, 2012
I have a DCS-930L wireless webcam. I can view the images on mydlink. Is it possible that mydlink take pictures with my webcam and then every 10 minutes sent to my domain[url].....? Who has experience with this link between mydlink and Internet?
View 11 Replies
View Related
Oct 26, 2011
I have 3 machines running windows XP, they all belong to my company's domain. These machines have to leave our office but still have to be able to connect to each other and share a few folders on each. I used to do this all the time. I would make sure to turn on the "Server" service, set the windows firewall to allow File and Printer sharing, set the File and Printer sharing setting in the Local Area Connection properties, and set the proper sharing/security of the specific folder. Then as long as each machine used a specific local logon name that was the same on each machine, they would all connect to the shares and work perfectly.However now, I seem to not be able to get any of this to work on machines that have service pack 3. Is there something in sp3 that breaks this?Isn't there a way to still share files on these sp3 machines even though I'm not on the domain? (without changing the domain membership)
View 9 Replies
View Related
Feb 5, 2013
I am using a (Windows 7 OS) machine from work (that has a domain name set) at home and want to connect it to my home's workgroup so that I can access files on two other computers currently in the workgroup: one running windows 7 the other xp.
View 1 Replies
View Related
Nov 1, 2011
Work station of domain network stopped accessing the server and internet. Assigned IP address, since DHCP would not hand out automatic IP address. Was working fine before today.
View 1 Replies
View Related
Apr 5, 2013
We are currently running Windows 2003 Domain in our network with DHCP turned on the Server. We have turned off the DHCP on the Router. We are using RV042 as out Gateway to the internet and everything is working fine. We would like to allow a couple of our users to be able to VPN into the network so that they can use Outlook and be able to access their files on the Shared Folder. The users would be using their laptops from their homes to connect via VPN using the standard Windows 7 VPN connection.
In the RV042 Interface there are many options and I am not sure I understand which setting would allow them to connect successfully to the network, be authenicated as a domain user.
View 1 Replies
View Related
Dec 30, 2011
I have a Windows 7 Laptop that need to be able to join a Home Workgroup as well as an office Workgroup. How!
View 1 Replies
View Related
Mar 10, 2013
I have created individual folders for the different users on the network domain server, but i am having trouble allowing the client to automatically connect to their personal folder.
View 2 Replies
View Related
Jan 9, 2013
Today we got our new VDSL internet connection and had to get a new router, which supports VDSL as our old one didn't.We have a small FTP enabled network hard drive (LaCie Cloudbox). With the old router it worked just fine. I configured the new router exactly as the old one, but something isn't right: I cant connect to the FTP server from the outside.I configured the NAT rules to open the FTP port 21 and configured dyndns on the new router also. On the old router all I needed to do to get it to work was configure dyndns and open port 21. However this doesn't work on the new one and I have no clue what the problem could be.I tried reaching it via its domain name and also tried the public ip address but none of them worked. The Network disk is connected to the new Router the same way as it was connected to the old one. The only thing that has changed is the new router. So the problem must lie somewhere in my configuration, as I havent touched anything else.
View 13 Replies
View Related
Mar 5, 2012
I have a PC attached to a standard 192.168.1.1 router with port forwarding turned on. The PC has an IP of 192.168.1.10 and I have Port 3389 (RDP) on the router forwarded to that PC's internal IP.
I currently have a DynDNS hostname, example.dyndns.org, and I type that into MSTSC (remote desktop) whenever I'm traveling.
But, is there a better way of doing this? The IP of the PC is not static, but it rarely changes. I do have a domain registered with GoDaddy and have full access to DNS records.
View 19 Replies
View Related
Feb 23, 2012
Trying to set up remote access to webcam. Signed up with dyndns.org for Hostname, but when I try to set up the DDNS Service Settings in the webcam firmware it continually gives 'Bad reply from server' and I'm pretty clueless when it comes to networking! As far as I can see it requires a User name and Password plus the newly acquired Hostname as shown [URL]
View 7 Replies
View Related
Mar 29, 2011
I have a SR520 where WAN configured as PPPoE with Dyndns address. I have done all the configuration through the CCA, so far everything is working fine. But now i want to configure SSL VPN, but I have getting an error message : SSL VPN cannot be configured, please configure wan interface using a static IP address. Is there any way that I can configure the ssl vpn through a dyndns address?
View 5 Replies
View Related
