Cisco Firewall :: One ASA5540 With Two 3750 Connections
Jan 9, 2013
i have two CAT3750 need to place in L3, and it supposed that used as L3 switches by SVI for L2 routing, and I want to these two configured as redundancy by HSRP. but now I can only have one ASA5540 to connects these of L3 switches.
so, here is my questions:
1. does ASA5540 support multi vlan?
2. does it support spanning tree protocol?
3. if I've choiced to use trunking between two L3 switches, does it can pass through HSRP hello msg?
4. achive network redundancy
View 3 Replies
ADVERTISEMENT
Apr 15, 2013
How many VPN connections the ASA5540 can provide at the same time?
View 2 Replies
View Related
Jan 10, 2013
i am setting up a new Monitoring System (CA Netvoyant). It has some default Cisco monitoring capabilities ( I believe these are soem standard MIBs). I am wondering how can I add more useful Cisco MIBs for the devices I have in my network. There are thousands of MIBs and it looks like it is not easy at all to find the useful ones.For example the MIBs that can give you Emergency and up to warning level information, cpu, memory, interface errors, module failures (in case of Cat 6500), FWSM, BGP, VPN tunnel status notifications. Is there a list of useful MIBs for each device type, like Cat 6500, ASA5540, Cat 3750-E etc depending on IOS Image? setting up the SNMP monitoring system?
View 1 Replies
View Related
Mar 14, 2011
I am configuring an ASA5540 firewall for a client, only difference to usual being that it is to run in Transparent mode. I have looked through for an EAL4 transparent firewall config guide but found nothing and therefore assumed that the usual one would be used.The clients security bod has now come back and insisted MAC filtering should be used but I can find no reference of this anywhere. Does MAC filtering is required to make a transparent box EAL4 compliant and if so where I can find documentation supporting this?
View 1 Replies
View Related
Sep 10, 2008
I had a working vpn configuration between a local and a remote router; the remote router is not under my administration.Now I moved the vpn termination from my side to an ASA5540 software version 8.0(3). The tunnel is up but there is no reachability. The "show crypto ipsec sa" on the ASA shows encapsulated packets but NO decapsulated packets! Routing and no_nat are properly configured.
View 28 Replies
View Related
Mar 7, 2011
I have an ASA- 5585X (v.8.2.4) directly connected to an upstream 6509, which is running EIGRP. I configured the ASA for EIGRP with same AS# and network numbers and no auto-summary. Here are the log messages I got:
Mar 8 15:11:08: %PIM-5-NBRCHG: neighbor 164.72.178.28 UP on interface Vlan150 (vrf default) Mar 8 15:11:08: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 164.72.178.28 on interface Vlan150 (vrf default)
Mar 8 15:11:11: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 164.72.178.28 (Vlan150) isup: new adjacencyMar 8 16:16:08: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 164.72.178.25 (Vlan150) isup: new adjacency
Mar 8 16:18:54: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 164.72.178.25 (Vlan150) is down: K-value mismatch
I lost my SSH connection to the upstream 6509 and couldn't get it back. Luckily I didn't lose my ASDM connection to the ASA, so I disabled EIGRP and went to look at the logs on the 6509.
What causes a K-value mismatch, and how to I rectify the situation?
View 1 Replies
View Related
Aug 6, 2012
I have this 2x ASA5540 firewall and notice the it is configured with a standby ip. The firewall is run in Active/Passive mode.However, the standby ip of this firewall is not point to the secondary firewall and vice versa for the primary firewall. [code]
1) May i know how is this configuration valid in the first place? I have checked through the configuration. None of the configuration is related to this ip address.
2) Can we remove this standby ip address on both the firewall and correct to the correct primary and seconadary ip address in both firewall?
3) We tried to use this ip address but cannot be used ? Is it related to the configuration of the standby ip address.Do note that the ping to this ip address x.x.x.120 is unreachable.
View 1 Replies
View Related
Jan 22, 2013
Customer has a ASA5540 at their main location and need a new ASA5500 for a DR site.
Can I simply take a config file from an ASA5540 and easily drop it on an ASA5545-X or what ever?
They are going to be using it as a VPN concentrator primarily.
Or are there going to be issues since the 5540 is running 8.4(5) and the 5545-X? Or if they upgrade to 9,0(1) or higher, then they should be the same?
View 2 Replies
View Related
Dec 21, 2011
Windows IIS server configured behind a Cisco ASA 5540 listening on port 443 currently. Access-list and static translation configured. I have been ask to redirect all port 80 calls to port 443 for this web site only at the firewall. I have suggested moving it behind our content switch with negative results. Can we do this at the firewall level? how to accomplish the redirect for a single site. 8.2.4 is current code
View 4 Replies
View Related
May 10, 2011
I upgraded our ASA5540 to 8.4, THEN noted the increased requirements for Memory. I purchased the 2Gig upgrade, but when installing in the Primary unit today, noted that there were 4 slots. Slots 1/3 had 512Mb modules, so I installed the 2 x 1Gig modules in slots 2/4.
The ASA5540 came up clean, and it "sees" the entire 3Gig of memory.
My question: Is this a SUPPORTED configuration? All documentation I have read only mentions 2Gig of memory. Also, If I had FOUR x 1Gig memory modules, would the ASA5540 support the 4Gigs of memory?
View 1 Replies
View Related
Dec 12, 2011
We have ASA 5540 with 8.2 SW. We are trying to download a file (3 MB pdf) from https session which fails if done behind the firewall. In case, the client bypasses firewall, the file gets downloaded as usuall. Interesting thing here to note is that when client is behind the firewall, its takes a long time to download the file and the file size always 312 Bytes, of course its a corrupt file.
View 3 Replies
View Related
May 9, 2011
How does one allow /31 mask for an management interface on an ASA5540 using version 8.3(1)?
I need to configure a 192.168.x.y /31 on the management 0/0 interface of a ASA5540 and it is providing me with the following error:ERROR: /31 mask is not allowed
View 1 Replies
View Related
Dec 11, 2011
I have requirement received from one of my customer. the part number given as ASA5540-AIP40-K8, same time requesting for addition of another 4Port GE Module (i believe its SSM-4GE Module). Is any option to add this module in to the above specified model (ASA5540-AIP40-K8).
As per my understanding the ASA5540 have the option to add 1 additional module only, so if we AIP-SSM module, we don't have any free slot left with to add another SSM-4GE Module in the firewall.
i am not getting even the option to add SSM-4GE in the ASA5540-AIP40-K8
View 1 Replies
View Related
May 18, 2011
I am migrating firewall fortinet to ASA5540 with inside (192.0.0.0/24), dmz (192.168.0.0/24), and outside (x.x.x.x), but the users of inside network gain access to the aplication for two ways: the first way is trough routing between inside and dmz, for example 192.0.0.200 to 192.168.0.20, and the another way is trough static nat between inside and dmz for example 192.0.0.200 to 192.0.0.20 (192.168.0.20 static nat). Is posible in Cisco configure that? because when i configure only firewall route the first way is OK, but when i add the second way only nat is work!
View 10 Replies
View Related
Jun 13, 2012
I have an inside network using PAT to one outside address. Our DNS server is on another local, but outside address. I can't get the inside network to successfully get addresses.I have another inside address that just uses the wirewall and gets addresses just fine from the same server.I have the box checked in ASDN that enables DHCP on the inside interface and points to the correct DHCP server,PAT service is working properly if I use a hard coded address for a machine on the inside network.This is an ASA5540 with 8.3(2)
View 2 Replies
View Related
Feb 26, 2013
My Expertise with Cisco ASA is Very less. I have observed Input errors in a Couple of Interfaces in Cisco ASA 5540 Firewall. [code] I need to Clear the Input errors on this particular Interface.Will Clear interface GigabitEthernet 0/0 will work?
View 4 Replies
View Related
May 23, 2011
I am attempting to FTP to a remote site through a IPSEC tunnel.When I am transfering large files the ASA5540 is showing syslog errors stating "connection timeout". What I think is happening is after about 1 hour the firewall is closing the connection control port for the FTP session and neither end is notified so eventually the transfer is stopped.What do I need to modify in the FW to accommodate these larger files?
View 1 Replies
View Related
Apr 28, 2013
I need to monitor with ping the inside sub-interface of my ASA5540, is that possible? I get the ICMP requests but no replys going out from the box.
I need to ping the 192.168.10.250 from the 192.168.5.55:
ASA Version 8.0(5)
interface GigabitEthernet0/1
nameif inside
[Code].....
View 2 Replies
View Related
Sep 23, 2012
We need Solution for disabling Anti-Replay on the Firewall for a specific tunnel. ASA 8.4(2) ) does not support disabling Anti-Replay on specific Ipsec tunnel , is it true , then if we want to disable Anti-replay , what we have to do in ASA5540 .
View 4 Replies
View Related
Jul 5, 2012
I have a ASA5540 firewall set-up with an interface MTU of 1500.
I suspect that we are receiving packets with a larger MTU but have not found an easy way of confirming this. Any command that can be run on the firewall to display the MTU packet size being received on an interface?
We are also running Solar Winds so could query an OID if such a variable exists.
View 1 Replies
View Related
Jun 10, 2013
what´s going on with an asa540 configure in multiple-context mode. I Have a cacti server on my lan and now I´m try to monitoring the interface with snmp. When I try to get this information returns the error message:
CISCOASA/CONTEXTA#
JUN 11 2013 01:52:00: %ASA-1-1-6021: Deny UDP reverse path check from 10.6.6.6 to IP_SRV_CACTI on interface inside
JUN 11 2013 01:52:01: %ASA-1-1-6021: Deny UDP reverve path check from 10.6.6.6 to IP_SRV_CACTI on interface inside
If I try to ping returns the same error:
CISCOASA/CONTEXTA#
JUN 11 2013 01:56:09: %ASA-1-1-6021: Deny icmp reverse path check from 10.6.6.6 to IP_SRV_CACTI on interface inside
Following attached the conf of my asa My question is Why I can´t ping or even use snmp ?
View 5 Replies
View Related
Nov 16, 2011
how can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
View 6 Replies
View Related
May 22, 2012
I have two 3750 stacks that are currently connected using two1GB fiber connections in an etherchannel. I now added new switches to each stack with 10GB modules in them. We would like to bring up the 10GB connection, but still have one of the 1GB lines as a backup, or even the whole etherchannel. Is there a way for us to make the 10GB the main and the 1GB the standby?
View 3 Replies
View Related
Mar 14, 2013
IOS Firewall (ZBF) Limit SMTP connections from same IP
we are running a Postfix MTA behind a IOS Firewall (ZBF) on a CISCO1921. Sometimes we get more than 2000 smtp login attemps like
postfix/smtpd[123456]: connect from (...) (...) postfix/smtpd[123456]: lost connection after AUTH from (...)
in one second. May be bruteforce or DoS ... nevertheless - we like to protect the Postfix MTA from this stuff.
Can we inspect the smtp and limit connections in a time period from the the same IP? Something like "not more than 10 smtp connections during 60 seconds from the same ip" .
View 8 Replies
View Related
Mar 1, 2012
We have a user who needs to access a vpn from his MAC through an ASA 5505. The user is getting an IP via DHCP and the outside interface of the ASA gets it's address via DHCP as well. The user states that when he is home or anywhere else but behind the ASA it connects fine, but once the ASA is added it times out. He is able to get to the internet from the machine without any issues. Looking over the config on the firewall it isn't set to deny any traffic and there is a global set on the interface and it is nat the inside interface. There is no global policy in place so I was considering implementing the following:
policy-map global_policyclass inspection_default inspect pptp
View 2 Replies
View Related
Jun 3, 2012
192.168.1.10 --> ASA 1-----> ASA 2-------> ASA 3----> server (172.21.16.15)
We have opened 3389 , 80 & 445 ports on all firewalls ( ASA 1, ASA 2, ASA ) for server (172.21.16.15) from (192.168.1.10).We are able to see connection in ASA 1 under show connection for 3389, 445 ,80.
We are not able to see connections in ASA 2 & ASA 3 under show connection for 3389. But we are able to see hits in ACl.
View 3 Replies
View Related
Apr 5, 2013
Is it possible to have a Cisco ASA5510 with two internet connections performing as follows.
Internet A---------All traffic except LAN to LAN vpn
Internet B---------LAN to LAN vpn
I cant find anything definitive on google to say it will or wont, i know it cant do policy based routing.
View 3 Replies
View Related
Aug 15, 2012
We are implementing an ASA 5510 firewall with DMZ. Our UDP packets are able to get outside the firewall, but our TCP packets are being denied because of no connection. I've attached the config file and log file.
View 2 Replies
View Related
Aug 1, 2011
We are in the process of getting two new connections pulled in that I would like to utilize in the following configuration.
DS3 - 45/45 I would like to use this circuit for all of our servers to NAT out of as well as our VPN tunnel to our remote site. It will be much more reliable than our cable line.
Cable Internet - 50/10 I would like to use this for all internet traffic that users generate. I would like to be able to fail over to the DS3 if this line goes down.
To get all traffic go out the cable line would take a dynamic NAT rule and a default route. How would I automate a failover to the DS3 with a backup route and dynamic NAT rule?
I understand that if the DS3 goes down it will take manual intervention to bring the tunnel back up and servers with static NAT will need reconfiguration.
View 1 Replies
View Related
Sep 18, 2012
We have a second ASA 5510 that is suppose to be a hot standby. I need to find out that, as a hot standby, does it have to have the same licenses as the ASA that it backs up. We purchased 50 SSL VPN licenses for that unit. If it fails over, we need to make sure the failover asa can allow SSL VPN connections.
View 3 Replies
View Related
May 22, 2012
I am trying to get up to speed on this topic as quickly as possible.
Here is my issue:
1) We are able to access the webiste
2) We are able to upload data packets
3) We allow the website to time out while we are uploading data packets
4) When we attempt to re-access the website the ip is blocked a) this includes pinging and trace
5) After an undertermined period of time the ip is unblocked and we are allowed to access it again.
The ASA 5505 router is the last forward facing stop before entering the VPN tunnel. We have tested by circumventing the ASA and we are unable to duplicate the disconnect. We have reviewed the config file and have not been able to identify what rule/settings could be affecting this.
when tracing port usage, the actions use 2 tcp ports and 1 udp port, the 2 tcp ports open and close by each transaction, when the ip block occures the 2 tcp ports are "dead" the udp port remains open (appearhently sending the remainder of the data packets)
View 1 Replies
View Related
Oct 21, 2012
When we say that ASA 5505 supports 10k connections does it mean that we can have 10k connections to the different websites?
View 5 Replies
View Related
Jan 15, 2008
I have a strange problem which looks to me like a DOS attack from the inside..but I cant be sure.
Symptoms:
All xlate connections used within hours.
Xlate connections start with all our servers across our WAN before moving onto all workstations.
No viruses have been found.
Looked in syslog and I cant find one single outside IP that seems to be a possible source.
View 7 Replies
View Related
