i have two networks accessing through Wi-Fi..if u want to access resources of A network from B then what should i do...means i have installed SQL database server on A network & want to access on Network B
View 1 RepliesI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedI have my PC in my office with two lans,, one, the internal lan of my company with a static ip address, the other one a broadband line for connecting to internet.. If i switch on both the lans at the same time, i am able to use the broadband lan and the internal lan stops functioning,, to make it work i need to disable the lan with broadband line.. i even tried bridging the lans but that again stopped my internal lan. way to connect both the lans at the same time so that both the networks work simultaneously... and if there is any other option to function two lans on a single PC at the same time.
View 19 Replies View Relatedi have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
recently I have set up a wifi network in my house, but when I tried to connect to it via my Windows XP (SP2) pc, it continually comes up with 'Limited or no connectivity'. I have tried multiple things, such as changing the network authentication method, to no avail.
View 3 Replies View RelatedI have wifi laptop that I want to use for video to tv but obviously only using about half of download speed of hardwired desktop pc. Can I use ethernet cable hardwired on laptop while it is wifi or will this interfere with connection?
View 2 Replies View RelatedI hav two different internet connections by different service providers,one is LAN and other is WIRELESS.whn i turn off the WI-FI button n put the lan connection thn it shows connected but pages dnt open and a reload message comes and thn i unplug LAN n turn on the WI-FI conctn thn i m able to connect and surf.so, i m only able to use the wireless one..
View 2 Replies View RelatedIt is usually by a router or install a third party software without anyone saying if it works or not.
I have two connections at home. One is a Wifi ( public wifi for my village) that i use for my phone and the other one is a wired dsl. I have used both but not on the same time. I tried connecting them both ( phone have tethering) but I think they are interfering with each other making me lose connection. I am using vista home.
I have seen the merge connections( in network and sharing center) and i have seen this one [URL].. but I am a little bit wary of changing my registry.
So I just got this[URL] Etekcity 1000mW 802.11 B/G Long range High Power USB Wireless WiFi Network Adapter with 6dBi Antenna RTL8187L Chipset: Computers & Accessories[/url] I installed the driver on my windows XP then restart the computer.. However, when I try connnecting to my network the first thing it does is start connecting... it dosnt ask for the password. After attempting to connect, nothing happens. So, I set up my own network, type in the SSID and type in the password and its confirmation. It still wont connect I tried re-installing and repairing and nothing will happen..So I test it on my macbook pro and everything works fine.PS my windows XP cannot get internet at all so I cant download anything nor do I have a USB?
View 13 Replies View RelatedLet me explain my current situation before asking my question:I have a Motorola Netopia7347-44 VDSL modem/router (with WiFi). The type of signal that I get from my ISP is analogue for phone, TV and intenet.This modem has an input for the Internet connection (dynamic IP address) and provides the IP addresses and connection for the other devices connected to it (via WiFi or cable), such as the TV over IP box, laptops, iPads and smart phonesI would like to implement content filtering on my WiFi network in order to avoid access to some websites, and my modem/router doesnt provide this feature (or at least I cant find it with my ISPs configuration) thought about using OpenDNS, but since I have a dynamic IP address and I cant install an updater on all the devices, then this solution didn work.
The next idea I have is getting a physical Firewall.Question: I am wondering if I can just connect the Intenet cable (that comes from the splitter between phone and Internet) to the Firewall, then I connect a RJ-45 cable from the firewall to my existing modem/router and should that be all (besides configuring content filtering on the firewall)?What should I take into account regarding the IP addresses? Should I enable the DHCP server in the firewall (I assume that most come with one), and disable the DHCP server in the modem?
I can't connect connect to my home wireless network. It says I am connected but none of my browsers will load anything. I can connect to other wireless networks that i have access to.I can connect if i plug into the router directly
View 3 Replies View Relatedcan i get better speed by using two wifi adapters at the same time
View 2 Replies View RelatedI can't connect to my WiFi network on my nook. The network is cisco 20629 and I forgot my password for it
View 1 Replies View RelatedI am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
View 2 Replies View RelatedKindle 3rd generation. I just got it recently
I've tried restarting my Kindle. I've tried resetting my router. I've reset my Kindle. I can use it to connect to open wi-fi networks. My computer (win7) and phone (htc desire) can connect to the wi-fi network. MAC filtering is disabled. Router is a Buffalo WCR-GN
We had our network set up using a Cisco wrt310n router and it was working greatThen suddenly we started having connection issues with anything wireless. There are 2 PS3's, 2 laptops, and 1 iPhone, 2 desktops but they are always plugged in and never skip a beat. When plugged in(where applicable) everything works just fine. So I changed the router to a D-Link wbr-2310. Network worked for a few days, but the wireless connection was a bit slow. Then it suddenly dropped wi-fi alltogether.
I updated drivers, updated firmware. And then the D-link stopped working even when wired, but thats a story for another time. So I plugged the Cisco back in, network up again. Worked for a few days and now I cannot connect wirelessly. I have my laptop in the same room as the router, it lists signal strength at full but says "did not receive any response from wireless router" and gives me a link to trouble shoot low signal... I have tried a lot of different tricks and settings and nothing has worked at all.
I have also noticed there are a lot of wireless networks in my area, I live in a townhouse complex. Each unit is seperated by a double garage, and backyard space. Last night I was detecting 11 networks. I tried using a different channel but no results.This isnt just an issue with one device, its every device I try and connect wirelessly, and with different routers.
I am unable to connect my laptop hp to WiFi network.
View 1 Replies View RelatedI have my computer with me and I can not get internet access using my friends wifi at her home. when I attempt to join their network I enter the password and it says I am connected and also says unidentified network. I go anywhere else and can use my computer with all other wifi networks.
View 4 Replies View RelatedI am using an OLD dell tower running XP pro. I am using a MSI US60SE network adapter to connect to my Wifi.It connects fine, but every 30 mins or so it loses connection & I have to go to "Change order of preferred Network" to click it again and it connects.
View 1 Replies View Relatedi just got my xbox 360 with built in wifi and it say connect to xbox live for free but it shows o ther people in my area but thiers is locked
View 1 Replies View Relatedlost wifi access thru local (home) connection. can connect thru public network. my grandma during last visit accidentally changed the network to her laptop. Have tried to reset netgear wnr2000v1 with pin in back. turned off and waited and turned back on again--no success. have tried to set up new network--see the network listed but no internet access available. have modem/router from comcast. My laptop is Acer Aspire 5733 with Lan Broadcom and wireless lan atheros.
[code]....
What i am trying to do is that i have a server in my store which has a running software for the store. I have a TP Link Wifi card installed in my pc.. i need to access the server using an ip through the ethernet cable. And i access the internet via the wifi device installed and running in my pc. the problem now here is that i cannot access both of the simultaneously. If i connect back the ethernet cable the browser does not browse or the internet does not work.. and i can access my server software.. as i unplug the ethernet cable my wifi card installed starts working all good and i can use the internet.. i have tried a little of soultions but have not been successfull enough to use both the connections simultaneously..
View 1 Replies View RelatedHow to connect secured wifi network to mobile device
View 1 Replies View RelatedMy laptop is unable to connect to my home wifi network after it had ip conflict last night. I tried network troubleshooting it and it always ask me to investigate the router. I tried to reset the modem a few times but my laptop still could not connect to it while my roommates and my phone could. Then I remove my wifi profile and attempt to connect back to the network. However, the same problem persist.My laptop model is Asus A43S and having Windows 7 Home Premium Service Pack 1.
View 4 Replies View RelatedRegion : Mexico
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : Telmex fiber
I use this router to replace the FO rooter that my ISP provides with the service as it's too limited (no NAT name translation, closes NAT, no uPnP etc...)
So the WR841ND acts as my main router, DHCP server, WiFi AP for all my network. My problem is that once in a while ( every 1 or 2 days) the wireless loses functionality, I still can see it from my devices, but can't connect, even fixing the IP (apparently not a DHCP issue then). The only way to fix this is to shut down the router 10 sec and restart it.
This brings another issue, I have another router (WR741) in WDS dispatching the signal to another part of the house to wired devices (Xbox , wd tv live hub) and it loses the WDS link, again the only way for this router to recover it is to restart it which is annoying.
I have DIR-615 Cx (bought in Taiwan) Hardware C2 ver. I reflashed with DIR-615 firmware from Singapore to get English interface. I connect to a internet through another router on which I setup D-Link on DMZ with port forwarding. Router works fine, I have internet connection. So the question is: I have small cafe and want to offer customers WiFi connection. I want to setup a time limit and allow them to browse only internet not internal network. (When I connect laptop to D-Link Wifi I can see my NAS on different subnet connected to cable modem/router) And if its possible to limit bandwidth. Can I do it with DIR-615 and how to configure such a setup?
View 1 Replies View RelatedI work in a small village in Africa and Interent access is often very unreliableTherefore I have 3 different ways of accessing the Interent from my home.The cheapest is Wifi from a local provider, but that doesn't always work. More expensive and still often unreliable is a 3G access. Then, when WiFi and 3G don't work I still can access the Internet via a Inmarsat BGAN satellite terminal, but that is very expensive.What I'd like do is to connect several computers to the same WiFi, 3G, BGAN Satellite Interent (all Ethernet) access via a home WiFi network.Now the questions I have:- can I just connect everything to a switch and then to the Wan-port of a wireless router?- how do the prioritisation works? When there is 3G available, I dont want to access the Internet via the BGAN, bacause that's too expensive?
View 2 Replies View Relatedneed to find SSID from my network security key and mac address filter - active/disable DHCP. trying to connect EPSON WF610 WiFi to my imac in a home network?
View 2 Replies View RelatedNetwork adapter missing - Can't connect with Wi-Fi at home for sharing
View 1 Replies View RelatedMy laptop detect the wifi network but when i try to connect with my wifi network it asks for security key then windows displays unble to connect.
View 1 Replies View RelatedI have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. url...My device who works fine:
-iPhone 4
-iPhone 3G
My device who don't connect to the WiFi network:xbox360 (new edition black with build in WiFin adapter)Asus Eee PC 1000H (Windows 7) witch WiFi.Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable.
I have the E3000 router. I set it up about a month ago and had my laptop and iphones and ipads all hooked up and working great. About two weeks ago, all of my devices are having problems connecting to the network and if they do connect, it is unstable (slow speeds or constantly dropping from the network). I know it is not the internet due to the fact that my LAN connection (hardwired) runs great. I am pulling my hair out trying to figure out why. I have restored to factory defauls and started over setting it up with no change in performance. I have the latest drivers on the router and the laptop. I thought maybe it was vista and my laptop or network card, but the fact that I cannot get my phones or ipads to connect with good performance I am starting to think it is something to do with the router. Also, just for more info, I am using Chater cable internet. I am running vista 64x on the laptop.
View 1 Replies View Related