Connect To A Network On Wifi On Cisco 20629
May 2, 2011I can't connect to my WiFi network on my nook. The network is cisco 20629 and I forgot my password for it
View 1 RepliesI can't connect to my WiFi network on my nook. The network is cisco 20629 and I forgot my password for it
View 1 RepliesI seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
recently I have set up a wifi network in my house, but when I tried to connect to it via my Windows XP (SP2) pc, it continually comes up with 'Limited or no connectivity'. I have tried multiple things, such as changing the network authentication method, to no avail.
View 3 Replies View RelatedSo I just got this[URL] Etekcity 1000mW 802.11 B/G Long range High Power USB Wireless WiFi Network Adapter with 6dBi Antenna RTL8187L Chipset: Computers & Accessories[/url] I installed the driver on my windows XP then restart the computer.. However, when I try connnecting to my network the first thing it does is start connecting... it dosnt ask for the password. After attempting to connect, nothing happens. So, I set up my own network, type in the SSID and type in the password and its confirmation. It still wont connect I tried re-installing and repairing and nothing will happen..So I test it on my macbook pro and everything works fine.PS my windows XP cannot get internet at all so I cant download anything nor do I have a USB?
View 13 Replies View RelatedLet me explain my current situation before asking my question:I have a Motorola Netopia7347-44 VDSL modem/router (with WiFi). The type of signal that I get from my ISP is analogue for phone, TV and intenet.This modem has an input for the Internet connection (dynamic IP address) and provides the IP addresses and connection for the other devices connected to it (via WiFi or cable), such as the TV over IP box, laptops, iPads and smart phonesI would like to implement content filtering on my WiFi network in order to avoid access to some websites, and my modem/router doesnt provide this feature (or at least I cant find it with my ISPs configuration) thought about using OpenDNS, but since I have a dynamic IP address and I cant install an updater on all the devices, then this solution didn work.
The next idea I have is getting a physical Firewall.Question: I am wondering if I can just connect the Intenet cable (that comes from the splitter between phone and Internet) to the Firewall, then I connect a RJ-45 cable from the firewall to my existing modem/router and should that be all (besides configuring content filtering on the firewall)?What should I take into account regarding the IP addresses? Should I enable the DHCP server in the firewall (I assume that most come with one), and disable the DHCP server in the modem?
I can't connect connect to my home wireless network. It says I am connected but none of my browsers will load anything. I can connect to other wireless networks that i have access to.I can connect if i plug into the router directly
View 3 Replies View Relatedi have two networks accessing through Wi-Fi..if u want to access resources of A network from B then what should i do...means i have installed SQL database server on A network & want to access on Network B
View 1 Replies View RelatedI am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
View 2 Replies View RelatedKindle 3rd generation. I just got it recently
I've tried restarting my Kindle. I've tried resetting my router. I've reset my Kindle. I can use it to connect to open wi-fi networks. My computer (win7) and phone (htc desire) can connect to the wi-fi network. MAC filtering is disabled. Router is a Buffalo WCR-GN
We had our network set up using a Cisco wrt310n router and it was working greatThen suddenly we started having connection issues with anything wireless. There are 2 PS3's, 2 laptops, and 1 iPhone, 2 desktops but they are always plugged in and never skip a beat. When plugged in(where applicable) everything works just fine. So I changed the router to a D-Link wbr-2310. Network worked for a few days, but the wireless connection was a bit slow. Then it suddenly dropped wi-fi alltogether.
I updated drivers, updated firmware. And then the D-link stopped working even when wired, but thats a story for another time. So I plugged the Cisco back in, network up again. Worked for a few days and now I cannot connect wirelessly. I have my laptop in the same room as the router, it lists signal strength at full but says "did not receive any response from wireless router" and gives me a link to trouble shoot low signal... I have tried a lot of different tricks and settings and nothing has worked at all.
I have also noticed there are a lot of wireless networks in my area, I live in a townhouse complex. Each unit is seperated by a double garage, and backyard space. Last night I was detecting 11 networks. I tried using a different channel but no results.This isnt just an issue with one device, its every device I try and connect wirelessly, and with different routers.
I am unable to connect my laptop hp to WiFi network.
View 1 Replies View RelatedI have my computer with me and I can not get internet access using my friends wifi at her home. when I attempt to join their network I enter the password and it says I am connected and also says unidentified network. I go anywhere else and can use my computer with all other wifi networks.
View 4 Replies View RelatedI am using an OLD dell tower running XP pro. I am using a MSI US60SE network adapter to connect to my Wifi.It connects fine, but every 30 mins or so it loses connection & I have to go to "Change order of preferred Network" to click it again and it connects.
View 1 Replies View Relatedi just got my xbox 360 with built in wifi and it say connect to xbox live for free but it shows o ther people in my area but thiers is locked
View 1 Replies View Relatedlost wifi access thru local (home) connection. can connect thru public network. my grandma during last visit accidentally changed the network to her laptop. Have tried to reset netgear wnr2000v1 with pin in back. turned off and waited and turned back on again--no success. have tried to set up new network--see the network listed but no internet access available. have modem/router from comcast. My laptop is Acer Aspire 5733 with Lan Broadcom and wireless lan atheros.
[code]....
What i am trying to do is that i have a server in my store which has a running software for the store. I have a TP Link Wifi card installed in my pc.. i need to access the server using an ip through the ethernet cable. And i access the internet via the wifi device installed and running in my pc. the problem now here is that i cannot access both of the simultaneously. If i connect back the ethernet cable the browser does not browse or the internet does not work.. and i can access my server software.. as i unplug the ethernet cable my wifi card installed starts working all good and i can use the internet.. i have tried a little of soultions but have not been successfull enough to use both the connections simultaneously..
View 1 Replies View RelatedHow to connect secured wifi network to mobile device
View 1 Replies View RelatedMy laptop is unable to connect to my home wifi network after it had ip conflict last night. I tried network troubleshooting it and it always ask me to investigate the router. I tried to reset the modem a few times but my laptop still could not connect to it while my roommates and my phone could. Then I remove my wifi profile and attempt to connect back to the network. However, the same problem persist.My laptop model is Asus A43S and having Windows 7 Home Premium Service Pack 1.
View 4 Replies View RelatedI work in a small village in Africa and Interent access is often very unreliableTherefore I have 3 different ways of accessing the Interent from my home.The cheapest is Wifi from a local provider, but that doesn't always work. More expensive and still often unreliable is a 3G access. Then, when WiFi and 3G don't work I still can access the Internet via a Inmarsat BGAN satellite terminal, but that is very expensive.What I'd like do is to connect several computers to the same WiFi, 3G, BGAN Satellite Interent (all Ethernet) access via a home WiFi network.Now the questions I have:- can I just connect everything to a switch and then to the Wan-port of a wireless router?- how do the prioritisation works? When there is 3G available, I dont want to access the Internet via the BGAN, bacause that's too expensive?
View 2 Replies View Relatedneed to find SSID from my network security key and mac address filter - active/disable DHCP. trying to connect EPSON WF610 WiFi to my imac in a home network?
View 2 Replies View RelatedNetwork adapter missing - Can't connect with Wi-Fi at home for sharing
View 1 Replies View RelatedMy laptop detect the wifi network but when i try to connect with my wifi network it asks for security key then windows displays unble to connect.
View 1 Replies View RelatedI have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. url...My device who works fine:
-iPhone 4
-iPhone 3G
My device who don't connect to the WiFi network:xbox360 (new edition black with build in WiFin adapter)Asus Eee PC 1000H (Windows 7) witch WiFi.Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable.
I have the E3000 router. I set it up about a month ago and had my laptop and iphones and ipads all hooked up and working great. About two weeks ago, all of my devices are having problems connecting to the network and if they do connect, it is unstable (slow speeds or constantly dropping from the network). I know it is not the internet due to the fact that my LAN connection (hardwired) runs great. I am pulling my hair out trying to figure out why. I have restored to factory defauls and started over setting it up with no change in performance. I have the latest drivers on the router and the laptop. I thought maybe it was vista and my laptop or network card, but the fact that I cannot get my phones or ipads to connect with good performance I am starting to think it is something to do with the router. Also, just for more info, I am using Chater cable internet. I am running vista 64x on the laptop.
View 1 Replies View RelatedMy Wifi network has a wpa2 password that is a random string of characters and numbers and yet last month a rogue IP Address kept popping up on my DNS list. It has to be coming from my neighbor who's bedroom is about 15 feet away from my router. So unless someone is sitting out on my front lawn to do this then it must be him.I've been looking for software that will notify me when a connection my router is attempted and kudos if it also asks my permission first would be great.There are wifi packet sniffers out there like Cain&Abel, Airsnort, that sort of thing but I am not quite savvy enough nor do I want to turn this into a complicated hobby but just need a basic warningin case something gets past my passwords again
View 3 Replies View RelatedIn my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies View RelatedAny way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View RelatedIn the bottom floor there are three computers, an iMac computer that receives an average wireless Internet signal, desktop computer and a laptop.I want to take care of the desktop computer and buy a network card, the next card:TP-Link TL-WN951NNow it has three antennas, each of its reception range is 2 dbiI should buy three of the 10 dbi antennas and connect them to the network card?It will give a good solution strong wireless signal and good speed?
View 4 Replies View RelatedI run a certain program in my PC and I need to make its data available to an iPhone app.I would like to broadcast it over WIFI from the laptop.How can I set up a simple wifi network so the iPhone can connect as described?I was thinking of wireless router connected directly to the PC.
View 6 Replies View RelatedHave a router called WBR-T2 Wireless ADSL 2+ Gateway. Have been using it for around a year. Has been working great until now. When I attempt to connect to the network using any of the devices in the house (iPod, Laptop and Xbox) the connection is never made despite the connection being visible when searching. The following router lights are ON or OFF:
The power is ON
SYS is ON
DSL is ON
WLAN is ON
USB is OFF
LAN 1, 2, 3, 4 are OFF
I've had this setup for years now, custom ssid and password on my router, altho yesterday my pc said i was connected to "Slayer 2" (my ssid is Slayer) i found it weird so i went to wifi settings and i deleted all the ssids in an attempt to re-connect to "Slayer" thing is now, even tho my pc detects my ssid, when i try to connect to it, it says password is wrong. this is very weird cuz i can connect to it on my portable and tablet.My pc stills connects to other ssids with np, so i think the prob is not my network adapter.I've tried to change the ssid, didnt work.tried to change the password and didnt work either.googled a bit and did the winsock reset commands, didnt work either.currently posting this from my pc which has now an ethernet cable coming from the router.
View 19 Replies View Relatedi'm trying to hook up the wii with wireless connections but it's just not working.. what should i do?
View 1 Replies View Related