Home Network :: How To Connect Two Lans At Same Time
Apr 11, 2011
I have my PC in my office with two lans,, one, the internal lan of my company with a static ip address, the other one a broadband line for connecting to internet.. If i switch on both the lans at the same time, i am able to use the broadband lan and the internal lan stops functioning,, to make it work i need to disable the lan with broadband line.. i even tried bridging the lans but that again stopped my internal lan. way to connect both the lans at the same time so that both the networks work simultaneously... and if there is any other option to function two lans on a single PC at the same time.
View 19 Replies
ADVERTISEMENT
Dec 2, 2011
We live in a large ranch styled house. Conversely, we installed two broadband connection at opposite ends of the home. One cable and one DSL. Reason: Kids share DSL and Parents have the cable all to themselves. We are currently wanting to setup a media server where both networks would have access to a database of media files. It would be in the middle of the house and each network would connect to it wirelesslyI guess first off, is this possible
View 3 Replies
View Related
Apr 27, 2012
how can i connect two offices in the same town.these two offices are separated by two kilometres.each office has ten rooms.how can i provide a secure intranet between the two offices ,what media can be used and hardware to provide a secure intranet via the two offices.
View 2 Replies
View Related
Aug 13, 2011
I'm using Comcast cable. I have a motorola cable modem. I run that into a Netgear 8-channel router with wireless (that's 8 physical network sockets).I have had these devices hard-connected to the router up until today and everything has been running fine:
* My Desktop (desktop running Windows 7 with Gigabyte motherboard and built-in Realtek NIC)
* T-Mobile VoIP device
* My Laptop (old Alienware running XP with generic NIC)
Today I took my old desktop motherboard from a year ago (Gigabyte motherboard, but not the same as My Desktop, built-in Realtek NIC), gutted it out, replaced the hard drive, got it running Windows 7 and set it up for my kids. Got it connected to the Internet early this morning when my machine was off and it ran fine.While it was updating, I fired up My Desktop and the router stopped working, all machines lost Internet, and I was at a loss.After some troubleshooting, it turns out that if I have My Desktop and the Kids Machine connected to the router and running at the same time, all devices on the router lose connection. I can have the Kids Machine on with the T-Mobile device and My Laptop and they all work. I can have My Desktop on with the T-Mobile device and My Laptop and they all work. But as soon as My Desktop and the Kids Machine come on together, everything gets hosed.The router is set to reserve different IP addresses by Mac Address for every machine. And I've verified that My Desktop gets its IP address correctly, and so does the Kids Machine. They are different IPs.I (usually) know just enough about networking to get a home network set up.
View 2 Replies
View Related
Mar 13, 2011
I want to create an ad hoc network on my lap and when other users connect to my ad hoc network and open your browser for the first time ... I take a personal website, not to have set in your browser ..
View 1 Replies
View Related
Oct 25, 2011
Using my Acer Aspire 5750 at school my wireless connection speed will drop from around 4 Mbps to .30 Mbps. The speed will start out fine from startup and degrade over time. This happens only at school, and only on this laptop using this wireless card. My home network hold its 3Mbps down just fine. My campus has two wireless networks, one is WPA enterprise encrypted and one is open, both exhibit this behavior. Using my network credentials on another machine or using a different wireless card this machine works fine.I've updated to the latest driver and rolled back to previous ones.
This is happening on a fresh install of Windows and on Ubuntu live CD so it is not malware or something along those lines. Spoofing a different MAC address does not change this behavior. The devid is PCIVEN_14E4&DEV_4358&SUBSYS_E040105B&REV_00
It is a Broadcom Wireless N...
What could be causing this problem? Does the NIC not like the access points or vice verse? Are they any settings I should tweak? The drop in speed happens no more than 10 minutes after boot and occurs in both Windows and Ubuntu. I should add that other students don't have this issue so it is not a network wide thing. Other students get around 4mbps down continuously. Using somebody elses credentials on this machine doesn't work either.
View 1 Replies
View Related
Apr 26, 2011
Topologies in real time implementation compare and contrast each other?
View 3 Replies
View Related
Jul 20, 2011
Lately I've been experiencing connection problems between my router and cable modem. Every night after 11:00 PM EST, my Internet connection sporadically goes out. I called my ISP who said there was nothing wrong on their end. Plugging directly into my modem allows me to access the Internet. When I wake up in the morning, the connection is back until 11 or later again. I ran WireShark but I'm not sure what to be looking for. There are a lot of random things from the LLMNR protocol like standard query A zmtvrjaql.
View 2 Replies
View Related
Apr 15, 2012
The problems looks like this: I'm able to browse the web without any problems until at random points of time - might be 2 hours after I turn on my PC or 5 or even half an hour the port 80 gets blocked - actually more like it hangs it self. As whatever I try to open i get "waiting for response" going and going. It's not even returning "page not found" error or anything. To top everything all other ports work fine - i can use https, ping run tracert - no problem there.
I've spend two days looking for some answer on the web but came up empty. I've scanned for malicious software with ad-awar and malwarebyte anit-malware - nothing came up. After restart of the pc everything comes back to normal but its frustrating needing to do that every now and then.
My home network looks like this: I have some broadband modem that is connected to local wifi TP-LINK router (Model No. TL-WR340G/TL-WR340GD). There are four devices using this connection - two pc's (laptops), android phone and android tablet.
View 1 Replies
View Related
Jul 17, 2012
How to connect to LANs from one Computer Answer of : How to connect to two different LANs from one Computer with two LAN Cards :with 16 Port Switch in My Computer lab.
View 1 Replies
View Related
Feb 19, 2012
Supposing we have 2 LANs of 5 pcs in different buildings is there any special way to connect them using fibre optics?
View 1 Replies
View Related
May 2, 2012
I need to connect two LANs together with hardware VPN, for some file sharing. I was thinking to use a Linksys router and a dedicated ADSL line at each site, in order to setup the VPN. There is also an extra ADSL connection at each site for user internet access. how am I going to separate the two, without having to install two network cards on each user PC?If I set the user's gateway to the VPN or the internet router, how can I use the other?
View 6 Replies
View Related
Jan 11, 2011
I have two locations in the same city and I want to connect them together so I can share files and printers. Each of the LANs has a router and is a simple workgroup. LAN A uses 192.168.1.1 255.255.255.0; LAN B is 192.168.2.1 255.255.255.0. What is the best way to connect these two networks together so I can share printers on both sides? Should I replace the network routers, they are older and definitely could use an upgrade
View 3 Replies
View Related
Aug 11, 2011
I'm given an ASA 5505 to configure for remote access vpn. I can establish vpn connection to the ASA 5505 but can't access any of the internal vlan/subnets. I configured three of the ASA ports for connection into each of the internal subnets/vlan via a switch.Given below is my full configuration.
ASA5505# sh run: Saved:ASA Version 8.3(1)!enable password bLjadbVl0mgRQWih encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0!interface Vlan2nameif
[Code].....
View 27 Replies
View Related
Nov 24, 2011
My Wifi network has a wpa2 password that is a random string of characters and numbers and yet last month a rogue IP Address kept popping up on my DNS list. It has to be coming from my neighbor who's bedroom is about 15 feet away from my router. So unless someone is sitting out on my front lawn to do this then it must be him.I've been looking for software that will notify me when a connection my router is attempted and kudos if it also asks my permission first would be great.There are wifi packet sniffers out there like Cain&Abel, Airsnort, that sort of thing but I am not quite savvy enough nor do I want to turn this into a complicated hobby but just need a basic warningin case something gets past my passwords again
View 3 Replies
View Related
May 10, 2011
LAN L1, with IP addresses 192.168.10.x, for Company C1
LAN L2, with IP addresses 192.168.11.x, for Company C2
I have networks separated: different racks (but very closer fisically: a wire can be thrown), different gateways (to DSL), but both LAN's must connect with each other. I have acquired two RV042, one for each company to create VPN's (permitting telejob).
View 1 Replies
View Related
Dec 21, 2012
i have two networks accessing through Wi-Fi..if u want to access resources of A network from B then what should i do...means i have installed SQL database server on A network & want to access on Network B
View 1 Replies
View Related
Apr 7, 2011
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies
View Related
Sep 1, 2011
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
View 5 Replies
View Related
Feb 14, 2013
I have 2 questions about a Network hard disk(for home using).I bought a hard disk (with a network card).This hard disk is connected to my "box"I have 2 questions...Is there a way to increase the speed of writing (20 Mo/s in usb) against 1 Mo/s in network.My second question is to find a way to connect to this harddisk from another network without using VPN
View 4 Replies
View Related
Mar 13, 2011
I have a question about my windows systems(XP and Vista) re-connecting to my network folders when my computers restart. I have some shared network folders on my Synology DS410. And then i mapped a network drive to use those folders.But every time i restart my computer i get the message "cannot reconncet all network drives"I have to put in my username and password everytime. I choose Remember login and password.How can i fix this so it automatically connects to these on restart?
FYI...
1 computer - Windows Vista Home Premium
1 computer - Windows XP Home
Both connected via wired LAN
My iSCSI drives connect just fine on restart. Just not my mapped network folders.
View 1 Replies
View Related
May 4, 2011
i want to use internet at home. i want to use my laptop in my room . If i use my lan cable in my room how can i use it. i mean may i use internet on both computers ?
View 1 Replies
View Related
Dec 17, 2012
Working in a small Software company. In my company we use 2mbps speed internet connection from one Internet service provider. We have 15macs(Users) in my company. All connected to that 2mbps internet.Due to slow service we had taken one more 2mbps from different internet service provider.My requirement is Using these two internet connections with different ISP and make All the computers communicate with each other. i.e., For file sharing, pinging from system under one ISP to the other.
View 10 Replies
View Related
Sep 26, 2012
I'm having trouble connecting to my home network. Whether it be wireless or wired. My computer will say that I'm connected to my network, however it says identifying network forever. Same thing with wired. I'm running windows 7...my network adapter cards are as followed : Atheros AR5B97 Wireless Network Adapter and Atheros AR8151 PCI-E gigabit ethernet controller. I've tried to update both of them, with no success. I've uninstalled both of them and reinstalled them, again, with no success.
View 10 Replies
View Related
Jul 23, 2012
Well I am typing to you all from my linux box. I have a desktop that runs Windows XP SP3 and have not been able to get it to connect for months now. I use an smc2862w-g USB card to connect from it ordinarily but like I said, it hasn't connected to my home network for months. It reads and connects to my neighbors networks just fine but for some reason it is isolated to my home network. My home router/modem is an Arris model.Today while I was talking to some guys I know in IRC who work the IT field, I got it to work for all of about 10 minutes. The problem is, is that it was an intermittent sync. I noticed that when I were to change channels in my router it would follow to let's say channel 11 but the card would bounce back and forth between 11 and 10 causing intermittent sync. If I changed to channel 4 then it would bounce between that and 5. Channel 6, same thing and so on and so forth. I read somewhere that it could be a problem with conflicting chipsets between the router and card but that doesn't make much sense to me. I've been in the computer field for a few years now as a Security Specialist and tech support agent so this does not add up. [code]
View 6 Replies
View Related
Mar 16, 2011
I have a home network and I need to connect 3 USB printers. I was searching online and I'm not sure if I needed a network switch, a USB network hub, or a multiport print server. I need all 3 PCs to be able to access any printer.
Here's what I have in mind. I'm just not sure what hardware I needed (red outline). The cheaper the better. Oh and I don't want a 24/7 PC running as a server.
View 3 Replies
View Related
Dec 3, 2012
I have a server webpage hosted on a local linux machine. I can access it by typing the I.P. into my address bar from another computer on the same network.way to connect to my computer on my home network from a computer not on my network.
View 1 Replies
View Related
Sep 19, 2011
I have an internet connection of 100.0mbps and have two pc connected to it sharing internet connection but the other pc can't connect to internet when the other one is connected? how can i i fix it?
View 16 Replies
View Related
Aug 4, 2011
I need to connect my home pc to my office LAN, is there a way of connecting to the LAN remotely as if the pc was locally joined to the network? I don't want to connect to a specific pc just join the network itself. When I logged into the router management I thought I would be able to just specify a remote IP address that would be allowed to connect to the LAN as if it were local but there is no obvious way of doing that. The router is an SMC.
View 2 Replies
View Related
Jul 31, 2011
I have a Windows Vista Service Pack 2, Windows 7 Service Pack 1, and a Windows XP Professional Service Pack 3 that I am attempting to connect to each other on my home network. Their WorkGroup is the same name, and on the Vista, and 7, the locations are a home network. Sometimes I see one computer on the other, but then if clicked, it wont connect and gives me a Cannot connect or computername-PC not found. That, or my computers will not show up on one another. I also have McAfee Total Protection with a Home Network option to 'Trust' each PC to be able to connect them in a network within McAfee and scan each one for virus protection. That will not work either. It did once, but not now. All McAfee versions are up to date yet I see on some devices when they sometimes show up on McAfee that the program on the other computer is an older version. Then, when I do get the option to send a request to 'Trust' another PC, I'll enter a password to be re-entered in the other computer, then it'll instruct me to enter it into that other computer but then it fails before I can do so. It'll say the other computer is not available.
View 19 Replies
View Related
Sep 23, 2011
I can't connect connect to my home wireless network. It says I am connected but none of my browsers will load anything. I can connect to other wireless networks that i have access to.I can connect if i plug into the router directly
View 3 Replies
View Related
Mar 12, 2012
Two laptops (Vista) connect to wireless router.Wireless printer is also connected to wireless router.Desktop has colour printer attaced to it.I want to connect the desktop (XP) to the wireless router so the laptops can print to the colour printer, and the laptops can open shared files on the desktop, but don't want the desktop to be able to connect to the rest of the world.
View 2 Replies
View Related
Jan 4, 2012
I bought a new laptop with Windows 7. Desktop is running Vista. Printer is set to share and connected to Vista machine. Printer and file sharing is enabled on both machines. Running Windows firewall on both machines. Disabled Comodo firewall on Vista machine. Both computers have the same workgroup. Both computers have the same user name and password. Password protected sharing is turned off both machinesVista can access the W7 machine, last night W7 could see but not access Vista, but it doesn't even see it. When I troubleshoot I get a message "file and print sharing resource (Vista PC name) is online but isn't responding to connection attempts".
View 1 Replies
View Related
