Use Internet On 2 Pcs At Home At A Time?
May 4, 2011i want to use internet at home. i want to use my laptop in my room . If i use my lan cable in my room how can i use it. i mean may i use internet on both computers ?
View 1 Repliesi want to use internet at home. i want to use my laptop in my room . If i use my lan cable in my room how can i use it. i mean may i use internet on both computers ?
View 1 RepliesI'm using Comcast cable. I have a motorola cable modem. I run that into a Netgear 8-channel router with wireless (that's 8 physical network sockets).I have had these devices hard-connected to the router up until today and everything has been running fine:
* My Desktop (desktop running Windows 7 with Gigabyte motherboard and built-in Realtek NIC)
* T-Mobile VoIP device
* My Laptop (old Alienware running XP with generic NIC)
Today I took my old desktop motherboard from a year ago (Gigabyte motherboard, but not the same as My Desktop, built-in Realtek NIC), gutted it out, replaced the hard drive, got it running Windows 7 and set it up for my kids. Got it connected to the Internet early this morning when my machine was off and it ran fine.While it was updating, I fired up My Desktop and the router stopped working, all machines lost Internet, and I was at a loss.After some troubleshooting, it turns out that if I have My Desktop and the Kids Machine connected to the router and running at the same time, all devices on the router lose connection. I can have the Kids Machine on with the T-Mobile device and My Laptop and they all work. I can have My Desktop on with the T-Mobile device and My Laptop and they all work. But as soon as My Desktop and the Kids Machine come on together, everything gets hosed.The router is set to reserve different IP addresses by Mac Address for every machine. And I've verified that My Desktop gets its IP address correctly, and so does the Kids Machine. They are different IPs.I (usually) know just enough about networking to get a home network set up.
I have my PC in my office with two lans,, one, the internal lan of my company with a static ip address, the other one a broadband line for connecting to internet.. If i switch on both the lans at the same time, i am able to use the broadband lan and the internal lan stops functioning,, to make it work i need to disable the lan with broadband line.. i even tried bridging the lans but that again stopped my internal lan. way to connect both the lans at the same time so that both the networks work simultaneously... and if there is any other option to function two lans on a single PC at the same time.
View 19 Replies View RelatedI want to create an ad hoc network on my lap and when other users connect to my ad hoc network and open your browser for the first time ... I take a personal website, not to have set in your browser ..
View 1 Replies View RelatedUsing my Acer Aspire 5750 at school my wireless connection speed will drop from around 4 Mbps to .30 Mbps. The speed will start out fine from startup and degrade over time. This happens only at school, and only on this laptop using this wireless card. My home network hold its 3Mbps down just fine. My campus has two wireless networks, one is WPA enterprise encrypted and one is open, both exhibit this behavior. Using my network credentials on another machine or using a different wireless card this machine works fine.I've updated to the latest driver and rolled back to previous ones.
This is happening on a fresh install of Windows and on Ubuntu live CD so it is not malware or something along those lines. Spoofing a different MAC address does not change this behavior. The devid is PCIVEN_14E4&DEV_4358&SUBSYS_E040105B&REV_00
It is a Broadcom Wireless N...
What could be causing this problem? Does the NIC not like the access points or vice verse? Are they any settings I should tweak? The drop in speed happens no more than 10 minutes after boot and occurs in both Windows and Ubuntu. I should add that other students don't have this issue so it is not a network wide thing. Other students get around 4mbps down continuously. Using somebody elses credentials on this machine doesn't work either.
Topologies in real time implementation compare and contrast each other?
View 3 Replies View RelatedLately I've been experiencing connection problems between my router and cable modem. Every night after 11:00 PM EST, my Internet connection sporadically goes out. I called my ISP who said there was nothing wrong on their end. Plugging directly into my modem allows me to access the Internet. When I wake up in the morning, the connection is back until 11 or later again. I ran WireShark but I'm not sure what to be looking for. There are a lot of random things from the LLMNR protocol like standard query A zmtvrjaql.
View 2 Replies View RelatedThe problems looks like this: I'm able to browse the web without any problems until at random points of time - might be 2 hours after I turn on my PC or 5 or even half an hour the port 80 gets blocked - actually more like it hangs it self. As whatever I try to open i get "waiting for response" going and going. It's not even returning "page not found" error or anything. To top everything all other ports work fine - i can use https, ping run tracert - no problem there.
I've spend two days looking for some answer on the web but came up empty. I've scanned for malicious software with ad-awar and malwarebyte anit-malware - nothing came up. After restart of the pc everything comes back to normal but its frustrating needing to do that every now and then.
My home network looks like this: I have some broadband modem that is connected to local wifi TP-LINK router (Model No. TL-WR340G/TL-WR340GD). There are four devices using this connection - two pc's (laptops), android phone and android tablet.
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies View RelatedHow much time is 5gb of internet?
View 7 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedI recently purchased a X2000 ADSL modem/router combination. For some reason the current time will not stay set to the time zone. Rebooting clears the discrepancy for a short time before it drops an hour exactly. I'm in the central time zone and the setting are correct on the basic setup.?
View 1 Replies View RelatedIs the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies View RelatedI have one 2621 router i want to creat time base access list so that one of my subnet user(10.128.194.0 255.255.255.128) use only internet between 11am to 2pm.
View 15 Replies View RelatedI just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies View RelatedI'd like to use 2 internet connections at the same time.Assuming there are two internet networks.Network A and Network B (both are either wireless OR one is wireless and one is wired OR both are wireless). So, now I want to use BOTH internet connections simultaneously. However, both connections will still be separate and not combined:If I had to transfer big files, then I could do this on network A.Now, I want to use network B for other "normal" internet use so that the transfer of files in network A gets the maximum speed since there is no interference with anything else.I have to let the computer know somehow that there are two connections used simultaneously. I also have to setup what programs use what connection. E.g., IE uses network a and Firefox uses network b, program "x" also uses network b, etc.I would use two network card/USB Wifi Adapers so that each network card/wifi adapter can connect to one network.how do you realize that without setting a Virtual Machine up?
View 9 Replies View RelatedI lose internet connection every day in the same time etc.i lose it in 2pm and i get it in 7.pm and tomarow again lose it in 2pm get it in 7pmit is not virus i have cleaned every infection whit Malwarebytes,Emsisoft,Hitmanpro,SuperAntispyware and Spybot
View 4 Replies View RelatedI lose every day internet in the same time etc.in 2 pm and tomarow again in 2pm and also i get in the same time etc i lose internet in 2pm and i get internet in 7pm and tomarow again i have caled my ISP and it is not problem whit it also it is not virus.
View 3 Replies View RelatedI hav two different internet connections by different service providers,one is LAN and other is WIRELESS.whn i turn off the WI-FI button n put the lan connection thn it shows connected but pages dnt open and a reload message comes and thn i unplug LAN n turn on the WI-FI conctn thn i m able to connect and surf.so, i m only able to use the wireless one..
View 2 Replies View RelatedIs it possible to connect to the internet through the Wifi and 3G internet from an iphone at the same time.If its possible are there benefits from it?
View 7 Replies View RelatedIt is usually by a router or install a third party software without anyone saying if it works or not.
I have two connections at home. One is a Wifi ( public wifi for my village) that i use for my phone and the other one is a wired dsl. I have used both but not on the same time. I tried connecting them both ( phone have tethering) but I think they are interfering with each other making me lose connection. I am using vista home.
I have seen the merge connections( in network and sharing center) and i have seen this one [URL].. but I am a little bit wary of changing my registry.
At around 2:30 PM each day, the internet slows down, and it says its connected but with limited access. A few minutes later, it gets full connection again, but it is super slow, then the same cycle starts over again. It stops happening around 8:00 PM.
View 1 Replies View RelatedI have laptop with windows 7 ultimate.i have two internet connection avalable...
1> wifi network of my office...which is protected by cyberom..so i cant open facebook and other restricted sites
2> internet through my android mobile...which is dialup connection or through usb tethering
i want to use office wifi for downloading via idm or other download manager and my mobile internet for social networking..or any idea i allow application to connect internet via perticuler network/way..
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
View 1 Replies View RelatedAI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies View Relatedi have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
[code]...
My internet (wired and wireless) usually works fine, but occasionally (read: every few days to weeks) the connection will suddenly black out for a period of time, anywhere from an hour to a day. I have tried resetting both my router and modem, and going through all the settings on my laptop, but I'm pretty sure it's not my computer, as no other devices can connect either. During the blackouts, when I look at the modem, the internet light will turn on for a second, then go off and then the red "alarm" light (aka "something is wrong" light) starts blinking like crazy, and this keeps repeating. This resolves itself after anywhere from a few hours to a whole day and everything is normal again. The light show, and the fact that I can't find any other problems, leads me to believe that it could be a problem with my provider (or the network itself) and not a hardware or software problem, but I can't be sure of this.Also, during the blackouts, I can connect to the network, but it shows that limited connectivity symbol (exclamation mark thing) and says no internet.
View 5 Replies View Relatedhe tries to share a file with me from his computer to mine the file will share, once done, if he goes online to watch any video, (on youtube, a news website or even a video he has saved on his computer) he will lose internet connection. He then has to restart his computer to get his internet back.
View 14 Replies View RelatedI am having a lot of trouble with my internet, and have been for the past 2 days. I cannot play any games or even use the internet to browse 99% of the time.The only time I can get it to work for about 5 minutes is like so; I open internet explorer and after a few minutes of loading it tells me that it cannot connect to the web page (or something like that). It has a troubleshoot option, after clicking it, it scans for possible solutions but it never finds anything. When it tells me it found nothing, there is another button to explore additional options, the instant I click this button, everything starts working again for a few minutes, and it just doesn't make sense to me why this is happening.I have to study and I need the internet, and I would like to play games again.
View 1 Replies View Relatedmy internet works normally during daytime but starts to disconnect and reconnect every few minutes at around 11pm. I've tried restarting my modem but to no avail. My home telephone line is not working when my internet starts disconnecting and it starts working during daytime. My modem is connected to the telephone.
View 4 Replies View RelatedI've noticed this in the last few days, but my internet seems to crash at the exact same time (29 past the hour) every hour. We've recently had a new modem in, and was working fine. I recently had a mass clearout of a lot of things in my PC (got rid of 500 gigs), so I'm wondering whether I may have deleted something which has caused this.
View 4 Replies View Relatedcan i get better speed by using two wifi adapters at the same time
View 2 Replies View Related