Dropped Connections With Usb Wifi Card (alfa Awus036h)?
Oct 11, 2011
I am using Windows 7 Home premium SP1 (x86). I can connect fine and after a (seemingly random) amount of time the connection will drop (at least according to windows). I can also easily reconnect without a problem, but it will not pick back up the connection automatically, which is a problem because I use programs that need to access the internet and Often leave large files to download while I'm sleeping or not home. So If I'm not sitting at my computer to manually reconnect, then whatever i'm trying to accomplish doesn't get done.I'm using the ALFA AWUS036H USB wifi adapter. I had previously been running windows XP and this same thing would happen (though, much less often) but when it happened in XP it would automatically reconnect in a few seconds. I downloaded the drivers from ALFA's website incase the ones on disk were not up to date, and I tried both of them (they have a "normal" and "power control driver" option) and the problem remains. Also, I've never used an external wifi adapter before so I'm not sure if its supposed to work this way, but there are 2 "signal strength meters" in the system tray the standard windows one that you can click on and see available networks or go to windows "network and sharing center" and then there is the ALFA one that you can click on and it takes you to the ALFA wireless LAN utility, where you can also get a list of available networks.According to windows there is a problem with the connection, however according to the ALFA wireless LAN utility, the connection is fine (green bars means good connection, red bars means no connection)When clicking on the Windows "signal strength indicator" in the system tray, it shows 1 of 2 different problems (notice the differences that I've highlighted with red boxes). No matter which one happens I can NOT access the internet. Despite the "problems" shown above, the ALFA wireless LAN utility shows that its still connected (while windows is showing a connection problem)To reconnect I switch to the "profile" tab (which is just a list of neworks that i've previously connected to) and double click on the network. In this case it will be Enotria Public.... the same one that (according to the ALFA wireless LAN utility) I'm already connected too After clicking on the network, the ALFA wireless LAN utility "signal indicator" in the system tray will briefly turn red (signaling NO connection) while it "reconnects". Then it will turn back to green, and Windows network manager/signal indicator (whatever you call it) will proceed to reconnect as well. After this happens, all is good and I'm reconnected and can access the internet.
As you can see in pics above the ALFA wireless LAN utility is always connected, and it never drops the connection but even so, the internet will not work when Windows drops the connection. However, When reconnecting I can access the internet BEFORE Windows reconnects. (I still have to reconnect as described above, but after I do so I can access the internet before windows FINISHES reconnecting) The tab shown in this picture was a web page that I loaded BEFORE Windows ever reconnected, and it is a page that I have NEVER viewed before, so its not just loading it from cache.
View 9 Replies
ADVERTISEMENT
Jul 30, 2012
I know this is possible, but I haven't found the steps to accomplish this. I have a Win 7 x64 with an Alfa AWUS036H connected to the internet (strong signal). I have a Win 7 x64 notebook whose wifi adapter shows a very low signal strength. I know there is a way to use the Alfa AWUS036H both for the primary wifi/internet connection and for Virtual WiFi to the notebook.The Virtual WiFi is supposed to be part of Win7? But I can't find in the network control panel how to set it up
View 8 Replies
View Related
Nov 29, 2012
is there a new driver for windows 8?
View 1 Replies
View Related
Mar 5, 2011
My DIR-655 drops WiFi connections every few days. All wired connections are fine. Rebooting the router fixes the problem at that time. Cable modem works perfectly fine. [code]
I'm sure I'm missing some devices, but that should give you the general mix of wired/wireless devices that I use. I'm single with visits from my son every other weekend, so network traffic is not that high at my house. I've had this router for a couple years now and didn't use to have this problem. I've been updating the firmware, and I suspect this problem happened after on one those updates. I just don't know which one. Also, I didn't use to have any neighbors with Wireless Routers (that I could detect), but recently there have been 2 who have gotten them. I was hoping this was a problem that D-Link was aware of, but that does not seem to be the case. I would hate to have to go out and buy a new router (not D-Link).
View 14 Replies
View Related
Jan 19, 2012
I just purchased a alfa wifi antenna. It has the cable terminal usb. but my router only has Ethernet and internet cable connection.
I have there PC( 1 desktop and to laptops.
View 1 Replies
View Related
Mar 30, 2011
I have some remote locations that connect to my ASA 5510 cluster (Aktive/Passive) using the Cisco VPN Client, from which the connection gets disconnected at random intervals (could be 5 minutes, but sometimes after 15 minutes). However, some other remote locations do not have this problem. All locations have the same VPN client configuration (distrubited by pcf file).
I already disabled isakmp keepalive on the ASA but this did not work. If I read it correctly, the Cisco vpn client logging shows that the ASA initiates the ending of the connection.
Code...
View 2 Replies
View Related
Jul 27, 2012
[code] When the connection is online, the speeds are fine- the issue is the 2-3 times a day when the connection drops off. The error that we are getting is "cannot connect with primary dns server" however in our attempts to restore the connection we have: [code] is there some issues in the area that we are not aware of?
View 3 Replies
View Related
Jun 13, 2008
I have a WRT110 router (firmware v. 1.0.04) and a PC and an XBox 360 connected to it (both via cable). Every 15-20 minutes the connection is dropped for appr. 1-2 minutes. I tried modifying several router settings, but the connections are still being dropped
View 9 Replies
View Related
Aug 22, 2012
I have cisco WS-C2960S-48FPS-L stacked. Weekly twice, my PoE connections are dropped and when the device is restarted, everything starts working normal. This issue happens weekly once or twice. [code] I can see that there is a bug id : CSCtg86211 and no work around for it. Any updates received from Cisco TAC ?
View 7 Replies
View Related
May 31, 2012
I have two XPS 15 (L502x) laptops (purchased in March '12) with Intel Wifi link 1000 BGN adapters. On a regular basis both laptops lose their connection to the internet (via FIOS), at the same time. I'm convinced that is not FIOS or my router. I have a Dell STUDIO 8100, an iPhone and iPad, and these wireless devices do not lose their connections. Sometimes I'm able to resolve the issue by using "troubleshooting" via the adapter, often restarting the laptop and/or the router is the only way to resolve my problem. I've run the Dell Support software, it indicates no drivers are available for update, so I assume I'm current.I've read about turning off 802.11n, I've read about problems w/ power management and conflicts with wireless.
View 10 Replies
View Related
Mar 13, 2011
I have a WRT400N and approximately every 30-45 minutes the router will drop all connections (wired and wireless), all the lights will go out and then power light (far right light) will flash for a minute or so. I have tried connecting directly to my modem and I have no problems at all.
View 7 Replies
View Related
Dec 5, 2012
Our Cisco ASA 5510 running 8.4(4)1 just started dropping packets and our AnyConnect clients are seeing horrible performance. The system is extremely slow compared to just a couple days ago.Nothing has changed on the system. I can post the configs if needed.
firewall# sho int
Interface Ethernet0/0 "outside", is up, line protocol is up
Hardware is i82546GB rev03, BW 1000 Mbps, DLY 10 usec
Full-Duplex(Full-duplex), 1000 Mbps(1000 Mbps)
Input flow control is unsupported, output flow control is off
Description: == WAN Interface ==
[code]....
I have done a "sho vpn-sessiondb detail svc" and I can see the dropped packets of the individual users, but cannot see why the packets are still dropping.how I can correct this and restore speeds?
View 1 Replies
View Related
Jun 28, 2013
I'm trying to configure a L3 switch with some vlans. Despite we add a "ip default-gateway", that is displayed on the "show run", when we look "show ip route" there is no default gateway or gateway of last resource.On the show running we see the following:
interface vlan 31
ip address 10.221.31.177.255.255.255.0
!
interface vlan 32
ip address 10.221.36.125 255.255.255.240
interface vlan 36
ip address 10.221.36.105 255.255.255.248
ip default-gateway 10.221.36.105
One server connected to the vlan 32 is not able to ping the switch svi on vlan 36 (10.221.36.105).When we look the "show ip route" we see that the default gateway is not set.Ip routing is enabled on the switch. I tested the same configuration on my simultator and it works fine.I'm attaching the "show running", "show version", "show protocols" and "show ip routing".The ip routing is enabled on the switch!
View 10 Replies
View Related
Dec 23, 2011
I've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.
View 1 Replies
View Related
Nov 6, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : wdr4300v1_en_3_13_23
ISP : comcast cable
This router worked fine until I updated the firmware downloaded from the TP-Link site. I have V1 hardware which is what the firmware was created for. Since the update the wifi continually kicks outs quite often rendering this router useless.
View 5 Replies
View Related
Sep 9, 2011
i installed a fresh Win XP, installed some motherboard drivers, installed a D-link dwl-g510 wireless adapter and the drivers that i got with the adapter, got no AV installed, but it just cant find any networks, im 100% sure the adapter is not faulty ( cuz i took it out, planted into another computer where it works)
View 1 Replies
View Related
Oct 25, 2011
how do you setup a wireless repeater using a awus036h. Or is it even a option?
View 1 Replies
View Related
Mar 21, 2012
I bought a new Alfa 1000mw adapter for the good range, and I've picked up several new signals...but the problem is the speed of my connection..It can be fine one moment at 4.5mbps and then drop down to .16 mbps in a matter of minutes. Usually once it drops it doesnt go back up until I reinstall the drivers..I have Win7 ultimate 64bit.
View 2 Replies
View Related
Jul 5, 2011
Win7, wrt54gs,
It works sometimes. I imagine it has a noise problem since sharing files works, internet works. I cannot remember how to change channels on this router to save my life, though. What is special about sharing a printer?
View 1 Replies
View Related
Feb 24, 2012
U have this AWUS036H adapter. and I bought this antenna but it doesn't work with my adapter, not antenna, not even base of antenna.
View 6 Replies
View Related
May 31, 2011
I'm looking for a HWIC card that will support SC fiber connections for a 2811. I know of the HWIC-1GE-SFP but this one only support the LC connections.
View 2 Replies
View Related
Jun 2, 2012
Well I'm typing from my tablet right now because for the 20th+ time, the Centrino 1030 card on my Vostro 3450 isn't connecting to hotel's wireless. Other places I have encountered it to have connection problems is colleges, universities, coffee shops, etc. It is also slow as molasses in my home too.
I have read other posts indicating similar problems without resolutions on the Vostro 3450. I am planning on replacing it with the BEST WLAN card there is. It seems a bit labor intensive from the service manual but doable. Has there been any "for sure" fix with the 1030 card?
The 1030 card is so incredibly bad that I am able to get 3/5 bars on my home network being outside while my Vostro can't even pick it up.
View 2 Replies
View Related
Jan 20, 2013
How use alfa rtl8187 in windows 8
View 1 Replies
View Related
Dec 4, 2012
Is it possible to install the above alfa card on mac os x 10.7.4?
View 2 Replies
View Related
Feb 7, 2012
My own AP wich is 2m away has a signal of -70db. The internal antenna receives the same signal at -30, -40db.I tried all the drivers I could find. Also tried 3 different antennas. I can connect to my AP but the speed rating is 1mbps to a max of 11mbps. The latest driver from Realtek is newer than the driver from ALFA site. Both drivers are the same, no differences noted.The adapter is not under warranty, because is bought from ebay.Also I tried the adaptor on another desktop PC and it has the same low signal. Attachment: Differences in signal strenght between internal adapter and the AWUS036NHR.
View 5 Replies
View Related
Nov 15, 2011
alfa free downloading wireless usb adapter
View 3 Replies
View Related
Feb 15, 2013
I am a university student and my building is made of concrete so I get pretty spotty wireless (lag at 9000+ ping on games?!). To improve my connection quality I was recommended the Alfa AWUS036NHR USB network adapter [URL]. The adapter itself works marvelously but here's the problem: when I install the adapter, the existing wireless drivers on my laptop fail and I cannot use the internal laptop NIC even when the adapter is unplugged. It says the device is ready but does not detect any networks. When I reinstall the NIC drivers, the adapter doesn't work anymore.Device manager still shows both drivers installed and running but the corresponding NIC/adapter won't detect any networks.
What I have tried:
-Disabling the other driver, reinstalling other driver
-Disabling a functioning driver to attempt to get the other device to work
-Trying different versions of the drivers--a longshot I know
My hardware:
Internal NIC:: Realtek RTL8723A Wireless Lan 802.11n USB 2.0
External adapter: Alfa AWUS036NHR using Realtek RTL8192C USB 802.11B/G/N 300M Wireless NIC drivers for Windows 8
Laptop: Lenovo Yoga 13 (i7 version), no ethernet port available, Windows 8 Pro
can I use both of them (not at the same time) without having to reinstall drivers each and every time I switch?
View 3 Replies
View Related
Mar 30, 2013
I have recently had some problems with my home wifi connections however that has been resolved.A week after it was resolved, i noticed on startup my wifi did not appear on the connections tab so i have to restart my computer one or two times to make it appear
View 1 Replies
View Related
Oct 6, 2011
ok here it goes. I have a hp tx2000 laptop using vista with a alfa awuso36h usb adapter to connect to the internet. Ok heres the problem i was using this setup to connect to my neighbores wireless internet with no problems for about 2 weeks(yes they know and are fine with me using it). But within the past week (actually all of a sudden it wont work) my program that came with the adapter shows alot of networks with full signals but when i connect to any of them it shows connected but wont actually bring up the internet. When i click on i.e. It says i.e. Cannot display the webpage. And if it actually does take me to google it will disconnect for no reason and reconnect to a random network thats available. my neighbors connection i was using just all of a sudden quit working and if i try to connect to it , it says cannot connect to frontier87. Also the other networks that show up sometimes will say the settings saved on this computer for this network dont match the requirements of the network, but sometimes the same network will connect but wont actually bring up the internet. I guess i just want to know what has changed to make me not be able to use a network that worked fine for me last week.
View 1 Replies
View Related
May 12, 2011
I am in a house with 3 laptops connecting to the same wireless router, the connection speed is 3Mbps. Two of the laptops have no problems connecting to the internet but mine does? Every so often is will just disconnect and when you look for the wirless networks it does not detect any. A restart is required and all is ok, but not for long.
View 5 Replies
View Related
Nov 28, 2011
When I check available Wi-Fi networks it says "No connections are available. All of our other computers work so I dont know what the problem is. When I check device manager for the adapter it says my adapter is enabled so I dont know what the problem is. How can I get it to recognize my wi-fi?
View 1 Replies
View Related
Mar 2, 2012
What I want to do is combine a sad 1.5M DSL connection and a long range WiFi signal into a single connection for a rural area home.I am looking for any effective solution (including boosting WiFi output signal beyond FFC suggested values). The WiFi long range antenna (DISH + gutted LNB) receives a full bar 40+ Mbps signal from 11 miles away. DSL is standard 1.5M over DSL Modem.
View 2 Replies
View Related
Sep 21, 2012
I bought my Sony Vaio notebook about 2 years ago and have since had problems connecting to certain networks. The laptop will connect to the network but when i open my web broswer it doesn't let me access any web pages. Basically there's no internet connection even though im getting a full strength wifi connection.
This problem only happens in certain locations. My parents house its fine (using a sky router), my old house in London fine (sky router again), my friends house (doesn't work), my new house (doesn't work - BT router), on the train (no again)
Its very frustrating, although it was manageable before as it worked in both my houses. However now it doesn't work in my new house its pretty much pointless me having the internet.
View 2 Replies
View Related