DL385 - Generic SSD In HP Generation 8 Server
Mar 5, 2013
So we're looking at building a server farm using HP DL385 Gen8 servers. We want to use SSDs, but the ones from HP are at least double the cost of other SSDs. Anyone put a generic Intel, OCZ, etc... SSD in an HP gen8 server?
View 3 Replies
ADVERTISEMENT
Jan 29, 2012
I have a NT-USB54M Wireless USB adapter. Ubuntu Linux recognizes it without prompt but windows requires a driver that is nowhere to be found any longer. I doubt i-micro (the company that makes this product) has made a driver for Linux so how is it possible for Ubuntu to recognize it? Is there a generic driver that would work with Windows XP?
View 8 Replies
View Related
Sep 13, 2012
Generic bluetooth adapter error code 43
View 2 Replies
View Related
Dec 30, 2012
My linksys router WRT54GS has defaulted its router name to a generic name. As i follow the instructions to access the set up screen (through 192.168.1.1), I only have a limited number of tabs on the SETUP screen (Basic Setup, MAC Address and Advanced Routing) - none of which provides access to the router name or SSID.
View 2 Replies
View Related
Apr 1, 2012
I've been wrestling with a Windows XP reinstall that wiped out my network adapter. Fortunately I found D-Link AirPlus Utility and have restored it. However, now it says that windows was unable to find a certificate to log me on to the network, although I have entered the correct key.
View 1 Replies
View Related
Aug 17, 2011
I am using LMS version 3.2 and i am not able to generate EOS/EOL report with error no connection to Cisco.Saw an update i LMS portal as this:
Now Available! LMS 3.2:Patch for un-interrupted service of Cisco.com download for Device/Software/PSIRT/EOX updates (To be applied on or before 15-June-2011)
so upgraded the patch cwcs33x-win-CSCto46927-0.zip and restarted the demeon as read in the read me file for the patch.Now the job execution status is always shows running, its neither fail nor pass.
View 6 Replies
View Related
Jul 9, 2011
I had a DI-524 for years and I had no problem. My girlfriend wanted more range /speed for her netbook, and bought a DIR-655.
Had no problem with the netbook (acer One) and the Wii. But the Iphone 1st gen (cracked, but working good up to now) won't see any Wifi.
What to say. I have to read the F* manual, I know. But Geez. "The high end" said the guy at the store.
I should have search the web a bit more before buying because this subject (iphone connect problem) is a popular topic. [URL] won't change a thing. The Iphone don't see the wifi network.
Hardware Version: B1 Firmware Version: 2.00NA
View 5 Replies
View Related
Dec 11, 2012
Anyone having problems connecting N150 router to a 1st Generation Nest Thermostat? Nest support says it's a problem with them not conforming "to the TCP/IP specifications around Network Address Translation (NAT) timeouts and are disconnecting Nest too soon". Any way to work around this problem until/if a firmware update fixes it?
View 3 Replies
View Related
Jul 1, 2012
I have two routers 1921 and 2901 and both of them are connecting to one Reliable Internet Line from one ISP. 1921 master router and 2901 as a Slave. this is my question, how i can make a Backup DHCP Sever in 2901 as a same IP address generation?
Example :
1921-------> Ip Generator 10.1.1.0 /24
2901-------> Ip Generate 10.1.1.0 /24
both generate same ip address, when the Master is lost, Slave could be Covered the LAN.
View 4 Replies
View Related
Jun 9, 2013
I need to know if the cisco ASA next generation specially ASA 5515X support PBR or no ?how to implement it? Also if i have many internet connections and i need to dedicate 2 ISP’s ADSL internet lines to certain service (such as mail) if the 1st fail, so the 2nd line come up to make redundancy with it ----------- Is this available on cisco ASA next generation.
View 1 Replies
View Related
Apr 26, 2013
I'm working on a BoM for a customer and i need to offer an ASA5525-X pair in HA with AVC and WSE subscritption, I've two question:
1) In order to use AVC and WSE I need the ASA bundle that includes the SSD HD right? (ASA5525-SSD120-K9)
2) In order to have both ASA's in HA, do i need to order two Suscriptions (ASA5525-AW3Y-PR) or only one that is "shared" in the cluster?
View 1 Replies
View Related
Jul 24, 2011
I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
View 2 Replies
View Related
Jan 10, 2013
i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
View 1 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
Aug 23, 2011
We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
View 2 Replies
View Related
Sep 29, 2011
i am facing the same problem now but am using windows 2003 server
View 1 Replies
View Related
Jul 23, 2012
I put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
View 1 Replies
View Related
Feb 16, 2012
I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
interface 1/1
trunk
vlan 1
default-vlan
vlan 555
[code]....
View 3 Replies
View Related
May 6, 2012
[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
View 10 Replies
View Related
Feb 11, 2011
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies
View Related
Mar 10, 2011
Is there an iTunes Server for WHS 2011 available?
View 3 Replies
View Related
Aug 28, 2012
After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies
View Related
Dec 14, 2010
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
View 19 Replies
View Related
Jan 25, 2013
I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.
I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.
View 5 Replies
View Related
Jan 26, 2013
I created an Array but this array contains no server by default, could you show me a step-by-step guide to add a new server to this array, I've searched for hours but couldn't find anything talking about this, here is a snapshot of my ISA server 2006 management console, If there is no server included in that array, my ISA server can't work, can it?
View 1 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Mar 5, 2011
What happens is I can go on the internet normally i.e. watch videos, look up sites but when I go to play a game like Counter Strike I lose connection. I aslo occasionally lose connection when I'm just surfing the web but it happens most of the time when I play a game.According to the troubleshoot it says it can't find the DNS Server or the Server IP. I am running my computer off of a Linksys wireless usb because the room I am in dosen't have any phone lines.
View 18 Replies
View Related
Sep 12, 2011
i use ISA server 2006 behind ADSL router. The server is configured as a proxy server for web browsing.Can i use it as a VPN server for remote vpn clients to access a server in the internal LAN.
View 3 Replies
View Related
Jan 18, 2011
I am trying to set up the ftp server in a mac server os x 10 but I do not see the firewall tab under system preferences->sharing I do not see the services tab either. So I do not know how to enable the ftp.
View 1 Replies
View Related
May 19, 2011
Is there any way to use pc as server for ps2.I have network access disc which allows to configure external network device.main reason is that i want access internet with ps2 via pc networking. i hav network card installed working fine as i share internet with ps2 from pc. My idea is that if i could use pc as server then i could redirect it to anypage[ex. google]
View 7 Replies
View Related
Sep 4, 2012
Is it necessary to understand web development to deploy a web server
View 5 Replies
View Related
Apr 13, 2013
I am new to Exchange Server 2007 . I want to know that in order to implement Exchange Server do I need to register Domain name like [url]... ? OR A FQDN of Active Directory can work.Is it compulsory to register domain ?
View 3 Replies
View Related
Dec 6, 2012
The servers are calibrated to allow this, however I'm not sure how to connect from my end. I have an assignment where I have to dial into both a Windows server and an Ubuntu server to conduct some tasks (the actual process of dialing into the servers is not part of the assignment). I've been given the username, password, IP address, and protocol for each server. However, I cannot figure out how to use these to "dial into" them.I am running Windows 7 on a wireless connection
View 6 Replies
View Related