Deploying A Web Server
Sep 4, 2012Is it necessary to understand web development to deploy a web server
View 5 Replies
ADVERTISEMENT
Cisco :: Deploying Config Templates With LMS 4?
Jul 31, 2011I tried to deploy configuration templates with Cisco LMS Template Center, due to the 10 Cool LMS Tricks to better manage your network i am able to do it now.Just i don't know why, after deploying these templates the configuration is not save to the startup-config.another problem i have with the snmp-server location configuration. It seems my template does not support spaces in the textbox. Any way to put spaces in the snmp location?
<parameter name="snmp-location">
<description>SNMP Server Location</description>
Cisco AAA/Identity/Nac :: ACS 5.2 Deploying Devices With IOS XR
Sep 27, 2011We are deploying devices with IOS XR and wondered if deploying them with TACACS authenticating to the Cisco ACS 5.x platform.
View 1 Replies View RelatedCisco :: Deploying 4400 Controller As An Anchor For 5500 Controllers?
Jun 7, 2011in one of the sites, the client has an exisiting 4402 controller which he moved to the DMZ in order to set it as an anchor & he purchased two new 5508 controllers to control the corporate APs. I configured all the parameters needed for the guest anchoring & then I tested the connection but there was an issue. (all the controllers are running the same firmware version)after testing the setup, the guest users could get an IP from the internal DHCP of the anchor controller (in DMZ), but then they cannot reach the internet or anything outside the anchor controller.Cisco confirmed that the 4400 is fully compatible with the 5500 to work in an anchor-foreign secnario as long as they are running the same firmware version. yet, when I temporarily used one of the 5500 controller in the DMZ as an anchor & I applied the exact same configurations on it as the 4400, it worked perfectly without any issues.
note: on the anchor controller (4400), the management & AP-manager interfaces reside on the same subnet & the wireless guest SSID is also mapped to the management interface. (may be this setup is causing the issue) but on the 5500 it is working just fine?
Cisco Wireless :: 5580 Deploying Router Into A Data Centre
Aug 18, 2012I'm looking at deploying a single WLC 5580 into a data centre and I'm trying to decide if to use flexconnect or to tunnel traffic back to the controller. There will be 2 offices each with 40 access points. The wireless will need to support roaming voice traffic. Will I have any issues with flexconnect and 30 access points? I'm aware that you can only have 25 aps per flexconnect group but I dont know if this has any limitations such as dirty roaming? Also is tunneling traffic back to the WLC ok for voice and video traffic as the traffic will have to travel back from the data centreto the local offices ?
View 5 Replies View RelatedCisco Application Networking :: ACE 4710 - Using Ciscoworks For Deploying New Image Software
Aug 21, 2011Is it possible to upgrade the software images on ACE 20 modules and/or ACE 4710 Appliances?
View 0 Replies View RelatedCisco Switching/Routing :: Deploying A Virtual Wireless LAN Controller (vWLC 7.3)
Mar 13, 2013I am looking at deploying a Cisco Virtual Wireless LAN Controller (vWLC 7.3).
Do I need Prime Infrastructure to manage the environment, or can I manage my AP's (1200 series) using the vWLC alone?
Cisco Firewall :: ASA 5510 / Add A Mail Server In The LAN And A Webmail Using Port 3000 On The Server?
Jul 24, 2011I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
MSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?
Jan 10, 2013i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
Linksys Wireless Router :: EA6500 Unable To Select Folder Access / FTP Server / Media Server
Dec 9, 2012I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies View RelatedCisco Firewall :: ASA 5505 - Proxy Server Send Register To Hosted Server Private IP Changed
Aug 23, 2011We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
Windows 2003 Server - Dhcp Server Cannot Ping Client
Sep 29, 2011i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedCisco Application :: ACE 4710 Server In Multiple Server Farms
Jul 23, 2012I put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
Cisco Application :: CSS 11503 - Server-to-server Load Balancing?
Feb 16, 2012I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
interface 1/1
trunk
vlan 1
default-vlan
vlan 555
[code]....
Server 2008 - Share Internet Through DHCP Server
May 6, 2012[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
Can't Connect To Server 2008 Via Server Manager On Windows 7
Feb 11, 2011I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedITunes Server For Windows Home Server 2011?
Mar 10, 2011Is there an iTunes Server for WHS 2011 available?
View 3 Replies View RelatedWant To Connect Server With Windows Server 2003
Aug 28, 2012After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies View RelatedServer 2008 R2 Windows Server Backup
Dec 14, 2010I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
Configure Windows Server As Both ISA Server And AD DC?
Jan 25, 2013I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.
I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.
How To Add New Server To An Array In ISA Server 2006
Jan 26, 2013I created an Array but this array contains no server by default, could you show me a step-by-step guide to add a new server to this array, I've searched for hours but couldn't find anything talking about this, here is a snapshot of my ISA server 2006 management console, If there is no server included in that array, my ISA server can't work, can it?
View 1 Replies View RelatedCisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedCan't Find DNS Server Or Server IP
Mar 5, 2011What happens is I can go on the internet normally i.e. watch videos, look up sites but when I go to play a game like Counter Strike I lose connection. I aslo occasionally lose connection when I'm just surfing the web but it happens most of the time when I play a game.According to the troubleshoot it says it can't find the DNS Server or the Server IP. I am running my computer off of a Linksys wireless usb because the room I am in dosen't have any phone lines.
View 18 Replies View RelatedISA Server As VPN Server?
Sep 12, 2011i use ISA server 2006 behind ADSL router. The server is configured as a proxy server for web browsing.Can i use it as a VPN server for remote vpn clients to access a server in the internal LAN.
View 3 Replies View RelatedSet Up Ftp Server In Mac Server Os X 10.6.4?
Jan 18, 2011I am trying to set up the ftp server in a mac server os x 10 but I do not see the firewall tab under system preferences->sharing I do not see the services tab either. So I do not know how to enable the ftp.
View 1 Replies View RelatedUse Pc As A Server For Ps2?
May 19, 2011Is there any way to use pc as server for ps2.I have network access disc which allows to configure external network device.main reason is that i want access internet with ps2 via pc networking. i hav network card installed working fine as i share internet with ps2 from pc. My idea is that if i could use pc as server then i could redirect it to anypage[ex. google]
View 7 Replies View RelatedDNS For Exchange Server?
Apr 13, 2013I am new to Exchange Server 2007 . I want to know that in order to implement Exchange Server do I need to register Domain name like [url]... ? OR A FQDN of Active Directory can work.Is it compulsory to register domain ?
View 3 Replies View RelatedHow To Dial Into A Server
Dec 6, 2012The servers are calibrated to allow this, however I'm not sure how to connect from my end. I have an assignment where I have to dial into both a Windows server and an Ubuntu server to conduct some tasks (the actual process of dialing into the servers is not part of the assignment). I've been given the username, password, IP address, and protocol for each server. However, I cannot figure out how to use these to "dial into" them.I am running Windows 7 on a wireless connection
View 6 Replies View RelatedWay To Create A Server
Dec 18, 2012I am running windows 7 ultimate 32bit its been a long time that i've been trying to set a private server for call of duty 4 i've looked all over the web but no guide get my server online.i just read that i need to do something with ports etc(i dont even know what that is)
View 3 Replies View RelatedCannot Communicate With DNS Server
Jan 12, 2011I've been having a problem with my browser lately, Its really slow and it turns out I have 1000 ping average ...the ping does up and down some times its 1 or 2 sometimes 500 . any way I get this msg when I use the diagnose option " Cannot communicate with DNS server(196.40.3.9) .
View 14 Replies View RelatedDNS Server In Router?
Dec 1, 2011Are there any DHCP routers that also host a DNS server which behaves as follows:A request for a host in the LAN is satisfied by dipping into the router's DHCP table A request for a host outside the LAN is passed on to the ISP's DNS server The vendors' documentation and tech support are not clear about this.
View 1 Replies View RelatedWeb Server Static IP?
Jun 17, 2012pool of static IP given by ISP, i want to run my web server,whats the best way to configure my web server behind router and assign Static IP for it. i will use static ip for router or web server??
View 5 Replies View RelatedDNS Server Isn't Responding
May 29, 2011I was able to connect this mornin, and suddenly it just didn't work. I checked and it said DNS server isn't responding. tried using the Open DNS 208.67.222.222, 208.67.220.220 But it is still not working and showing the same error.
View 3 Replies View Related
