Web Server Static IP?
Jun 17, 2012pool of static IP given by ISP, i want to run my web server,whats the best way to configure my web server behind router and assign Static IP for it. i will use static ip for router or web server??
View 5 Replies
ADVERTISEMENT
Proxy Server Software For NAT Static IP
Feb 13, 2012I have an Static IP address and I want to hide this Static IP address from users. But I dont have router I searched on internet and I got Winproxy software which can does this work but that is only trial version. How to hide my static IP? Any software like Winproxy which works on my server like proxy server i.e protect server from viruses, theft, hackers, Trojens etc.?
View 4 Replies View RelatedStatic IP From ISP On Windows Server With DHCP?
May 7, 2011I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. THE SETUP: As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. Pretty simple.THE QUESTION: How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address. WHAT I'VE TRIED: I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good.
View 2 Replies View RelatedAdd Static Route For New Exchange Server?
Sep 11, 2012Add static route for new exchange server?
View 1 Replies View RelatedStatic IP From ISP On Windows Server With DHCP
Aug 22, 2011I'm totally new to using Windows Server 2003 (or any windows server edition) but I do have a basic understand of networking. I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address.
I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good. I guess what I'm basically looking for is a screen like this (I hope you're familiar with the configuration pages of Linksys Routers) url...
Windows 7 Vpn To Server 2000 With Static IP?
Apr 13, 2012i have new laptop and trying to vpn into office with static ip. and the rdp into work station. vpn connects fine although says iv6p has no network access.. and rdp will not connect
View 3 Replies View RelatedStatic IP For Windows 2008 Server R2
Jun 17, 2012I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedCisco :: Internal Server Is Not Accessible From Outside Static?
Mar 23, 2013I have nated my 172.81.15.0 255.255.255.0 into my internal server 10.1.10.164 , i can ping the out side server but the internal server is not accessible from out side static (Database-Servers,interface-sms) 172.81.15.2 10.1.10.164 netmask 255.255.255.255icmp permit 172.81.15.0 255.255.255.0 interface-smsroute zemen-sms 172.81.15.0 255.255.255.0 10.131.199.201 1access-list Database-Servers-in extended permit tcp host 10.1.10.164 host 10.185.62.144 eq 9090access-list Database-Servers-in extended permit tcp host 10.1.10.164 host 10.185.62.144 eq wwwicmp permit host 10.185.62.144 interface-smsi can ping the out side server 10.185.62.144 with out a problem . from the server 10.185.62.144 i can ping untill 172.81.15.2 and it will not ping the natted server 10.1.10.164. as u seen the accesslist ping is permitted.
View 1 Replies View RelatedStatic Ip Is Not Working On Server 2008 Via VMWare 0.7?
Nov 2, 2011I install virutal machine "VMWare Workstation7" on windows 7, i am mcitp student for practice i am using windows server 2008 on VMWare, but i can't assign static ip whenever i assign ip it show no access to the internet?
View 3 Replies View RelatedLinux Server With Two Static Ip - Public / Private
Dec 14, 2011Is there a simple way to have a web server have both a static public ip (I have a block of static IP's) and an static private ip (ex 192.168.0.60)? I am running a web project management application....
View 4 Replies View RelatedD-Link DAP-1522 :: DNS Server Not Shown In Static IP
Mar 16, 2012Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore.
View 4 Replies View RelatedCisco :: Dual ISP On A 5510 With Static Nat To A Mail Server?
Sep 2, 2011Only trying to have the mail server reachable via the secondary ISP link if the primary ISP link goes out. The public MX records with priority markings should make it so any outside hosts tries the first ISP address then the second ISP address if the first is unavailable. I would be using object tracking to control the default gateway in the ASA. I'm just a bit fuzzy on the NAT with a dual ISP config on single box.It shouldn't happen but... if traffic comes in on ISP2 while ISP1 is still up (and the current default gate) that traffic should return out the ISP2 interface (using the ISP2 address and avoiding asymmetric routing) since there already an existing connection present inside the ASA. Any server initiated traffic would still use the current default gateway defined via object tracking on the ASA.
View 1 Replies View RelatedStatic IP / Configure Server 2008 For Internet Access?
Oct 9, 2012I have a static ip , So how co configure my server 2008 for the access from internet [URL]
View 1 Replies View RelatedCisco WAN :: 887 ADSL Configuration With Static NAT For Mail Server?
Feb 8, 2012I have configure 887 ADSL router with attached configuration. But users cant access internet properly. (Ex: yahoo and gmail mail cant access)
View 8 Replies View RelatedCisco Firewall :: 5510 8.3 (1) Static Nat For Web Servers And FTP Server As Well
Sep 13, 2011I got the charge of a ASA 5510 running with 8.3(1) version.Found that this is simple config with Patting for inside host and couple of Static Nat for web servers and FTP server as well.
There is lots of other configuration being done,I assume for the purpose of just R&D by the previous administrator.I need to understand if the following Nat statements holding any relevance?
Where we are running Only NETWORK_OBJ_192.168.0.0/23 subnet at inside and there is no other subnet defined in rest of the statements.i.e 10.0.0.0/27 and 192.168.1.128/27 doesn't exist at all.
Linksys Cable / DSL :: X2000 / Setting Up Static IP For Linux Server?
Jul 2, 2012The router I am using is the Linksys X2000 wireless-N ROuter with ADSL2+ Modem. How to give my linux server a static Ip adress. I've googled it and I don't understand how they are telling me to set it up in the router.
View 3 Replies View RelatedCisco VPN :: 2811 - Static NAT Causes Unable To Access Server Via Internal IP
Nov 22, 2011I running site-to-site IPsec VPN in Cisco 2811 IOS 12.4 both site. Here I encounter a problem to access server on Site A from Site B
Site A having Leased Line connected to router with Public IP. I have done static mapping 1 web server to Public IP (NAT). This to allow external users to access the server via Public IP. At the same time, users at Site B would need to access to same server via Internal IP since they have Site-to-Site VPN established. But once I done Static Mapping (NAT), user at Site B unable to access the server at Site A using its internal IP. But external user can access server via Public IP. What went wrong here. Do i need to add extra command to get this done?
Cisco Switching/Routing :: 861 Need DHCP Server With Static IP Addresses
Feb 2, 2013I used to use a CentOS self-made server for intranet for my little office, but I bouth few days ago a Cisco 861 router to replace the linux box.
1. I have 2 public IP classes from my ISP. 1 class is limitted to 80mbit upload, the other to 30mbit upload. So I need some sort of DNAT to be able to know exactly which intranet computer uses big internet and which one limitted internet.
2. I need DHCP server and with static IP addresses (one computer must always have the same IP address, etc).. i have my needs for this.
3. Also I need external access to some servers inside (web, ftp, etc) [code]
So far so good, all looks simple and I can achieve this in 2 hours on a centos linux box (correct routes, ip forwarding enabled and few iptables rules for NAT/SNAT/DNAT).
But on this brand new Centos router well, i'm not even successful in pinging the outside world, nor the inside world I'm tired of reading the forums, the documentation..i want (at first) a simple scenario: vlan+dhcp, fa4 with 1 public ip address and ACCESS to the real world. I wasn't able to achieve not even that much. [code]
Cisco Firewall :: 2801 / Setting Up Static NAT To Internal Server?
Dec 15, 2012One of my internal servers requires it to be available to the internet I am having a hard time allowing it to be NATed through my Ciscc 2801 router. It seems as though im missing something small. From what I can gather it seems as though its as issue with ACL, but im not sure. I have ran the following command: ip nat inside source static tcp 192.168.5.1 ***WAN IP Address*** 8443 extendable Then I tried to add it to the ACL via this command: access-list 150 permit tcp any host ***WAN IP Address*** eq 8443
Here is a copy of my config.
IP 172.19.3.x
sub 255.255.255.128
GW 172.19.3.129
Ciscso 2801 Router
[code]....
Linksys Wireless Router :: E4200 - Static IP Lease From DHCP Server?
Jul 8, 2011I just bought an e4200. I was using a LinkSys WRT54GS running DD-WRT alternative firmware.
One feature that I really liked in DD-WRT was the ability to assign static IP leases from the DHCP server. I liked having all of my devices running with a predictable, known IP address on my network. I have a Home Theater PC, and various controller applications that run on iPhones, etc. - some pretty homebrewed. Configuring the firewalls, etc. was much easier with IP address based controls.
Is there a way to achieve the same within the e4200's stock firmware?
Cisco Switches :: SG500 DHCP Server Does Not Assign Predefined Static IP Addresses
May 17, 2013I upgraded my SG500 switch firmware to 1.3.0.59, since there is a new functionality DHCP server v.4 well I must say I came accross the issue I cannot solve. DHCP server assign dynamic address - no hassles. troubles start with static IP hosts.I defined a couple of hosts with static address within the correct subnet. I tried with hardware address and client identifiers. no luck. my switch does not assign the IP address I assigned to the suitable mac address. to define it I use both CLI & Web.
ip dhcp pool host HP-Elliteaddress 10.10.11.7 255.255.255.0 client-identifier 01:d8:d3:85:cf:09:72client-name HP-Ellitedefault-router 10.10.11.1exit
ip dhcp pool host VAIO-Zaddress 10.10.14.108 255.255.255.0 hardware-address 54:53:ed:1c:a1:46
default-router 10.10.14.1exit
Cisco Switching/Routing :: Does The 22xx Series FEX Support Static Or Dynamic LAGs Between Itself And A Server
Nov 18, 2012Does the 22xx Series FEX support static or dynamic LAGs between itself and a server?Imagine a server with dual 10G NICs, and I need to connect them to the SAME 22xx FEX....can I set up a LAG between the two 10G NIC ports and two 22xx FEX Host ports? Does it depend on how the FEX is connected to the parent 55xx?
View 0 Replies View RelatedCisco Switching/Routing :: RFC 3442 / IOS DHCP Server - Classless Static Routes On Clients
Nov 11, 2011I was trying to find if it's possible to add the option for static routes for DHCP clients on Cisco IOS DHCP config mode. I'm looking to add a settings as defined on RFC 3442, like this one, set on ISC DHCPd server:
Global settings:
option rfc3442-classless-static-routes code 121 = array of integer 8;
option ms-classless-static-routes code 249 = array of integer 8;
And for the subnet declaration:
option rfc3442-classless-static-routes 24, 192, 168, 30, 192, 168, 10, 1;
option ms-classless-static-routes 24, 192, 168, 30, 92, 168, 10, 1;
Linksys Wired Router :: Static Route To Access TMG Internal Network Through RV042 Pptp Server?
Mar 20, 2012Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?
View 1 Replies View RelatedCisco Routers :: RV180W With 1.0.2.6 Firmware - Static DHCP Have No Buttons To Add New Static Lease
Mar 12, 2013Today I installed the 1.0.2.6 Firmware on a RV180W. I only have now two problems regarding the Static DHCP support in the GUI.
1. Via the Networking > LAN (Local Network) > Static DHCP I have no buttons to Add a new static Lease.
2. Via the Networking > LAN (Local Network) > DHCP Lease Clients I can thick a Lease and click on Make Static IP. The result is an error: Operation failed.
Linksys Cable / DSL :: WAG160N Static DNS - Setting Up Static Dns 3 On WAG?
Jul 26, 2011I've been having a problem with setting up static dns 3 on my WAG, what has been set is...
Static DNS 1: 208.67.222.222
Static DNS 2: 208.67.220.220
Static DNS 3: 208.67.220.222
Now if I look in my router status screen 1&2 are correctly displayed but the 3rd entry is showing my ISP's DNS,
Cisco Firewall :: ASA 5510 / Add A Mail Server In The LAN And A Webmail Using Port 3000 On The Server?
Jul 24, 2011I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
MSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?
Jan 10, 2013i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
Linksys Wireless Router :: EA6500 Unable To Select Folder Access / FTP Server / Media Server
Dec 9, 2012I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies View RelatedCisco Firewall :: ASA 5505 - Proxy Server Send Register To Hosted Server Private IP Changed
Aug 23, 2011We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
Windows 2003 Server - Dhcp Server Cannot Ping Client
Sep 29, 2011i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedCisco Application :: ACE 4710 Server In Multiple Server Farms
Jul 23, 2012I put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
Cisco Application :: CSS 11503 - Server-to-server Load Balancing?
Feb 16, 2012I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
interface 1/1
trunk
vlan 1
default-vlan
vlan 555
[code]....