Windows 7 Vpn To Server 2000 With Static IP?

Apr 13, 2012

i have new laptop and trying to vpn into office with static ip. and the rdp into work station. vpn connects fine although says iv6p has no network access.. and rdp will not connect

View 3 Replies


ADVERTISEMENT

Servers :: Disable Protection Sharing Windows Server 2000

Mar 27, 2011

disable protection sharing win server 2000

View 1 Replies View Related

Sharing :: Mapped Drive On Windows NT 2000 Server Not Accessible?

Mar 26, 2012

I have a domain with a domain controller Server 2003. I have a backup dc running an application with server 2008. The shared folder I am trying to access is on an nt server 2000. We have had a mapped drive "I:" and have used it for years. Our copier also scans to a shared folder on the server 2000 machine. All of the desktop systems are xp sp3 with one W7 machine. A couple of weeks ago when user attempted to access the shared/mapped drive, an error would occur that "the drive was in use and they could not be logged on". Sometimes the error would say "you don't have permission to access the drive." Mind you no settings have been changed on the network. When either of these errors would occur it would occur for everyone but if I rebooted the server everyone could connect again. The same errors would occur the next day or 6 - 8 hour later. Now the error has occured "Drive is already in use and you cannot be logged in" (I have tried drive Z as well the drive is not in use) and restarting the serever no longer works. No one can access the shared drive. I have unmapped the drive on my system and have attempted to reconnect, I enter the path and check reconnect at logon and it asks for a password. I enter the administrator password (which is what I always used) and it just pops right back up asking for a password as if I entered nothing. I can ping the server with the shared folder and even logon remotely so I know it is not a physical disconnect. I am not sure what changed and have followed many suggestions found to no avail. We cannot access the shares or scan.

View 1 Replies View Related

Static IP From ISP On Windows Server With DHCP?

May 7, 2011

I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. THE SETUP: As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. Pretty simple.THE QUESTION: How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address. WHAT I'VE TRIED: I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good.

View 2 Replies View Related

Static IP From ISP On Windows Server With DHCP

Aug 22, 2011

I'm totally new to using Windows Server 2003 (or any windows server edition) but I do have a basic understand of networking. I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address.

I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good. I guess what I'm basically looking for is a screen like this (I hope you're familiar with the configuration pages of Linksys Routers) url...

View 14 Replies View Related

Static IP For Windows 2008 Server R2

Jun 17, 2012

I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.

View 4 Replies View Related

Get Server 2000 To Map Drives On Pc?

Feb 28, 2011

I am trying to get my server 2000 to map different drives on my pc using a logon scripts when myself or my wifw logs onto my pc.

View 1 Replies View Related

Lan Card Not In Windows 2000 Hcl

Oct 6, 2012

Am switching from windows95 to Windows 2000 Professional, & During the Pre - Installation preparations, I discovered that the Machine contains a LAN Card, But i cant find it in the HCL FOR WINDOWS 2000 PROFESSIONAL.What should i do to get the system back in the service?

View 1 Replies View Related

Cisco Switching/Routing :: Nexus 2000 How To Configure Dynamic-pinning / Instead Of Static Pinning

Sep 18, 2012

Any info on how to configure dynamic-pinning, instead of static pinning on a Nexus 2224 connected to a 7009?Can't seem to find anything on CCO!

View 9 Replies View Related

Webstar 2000 Series Windows 7?

Mar 26, 2012

i need a software for webstar 2000 for windows 7

View 1 Replies View Related

Windows 7 No Longer Likes 2000 / Log On Error

Feb 29, 2012

I have a windows 7 computer and a windows 2000 on a wired network. The windows 7 and 2000 previously played nicely although it was a bit of a pain to get it to work the first time, don't really remember what the issue was. I have a big old CAD plotter connected to a parallel port on the windows 2000 computer and previously was able to use it from the windows 7 computer. I was also able to access any file on the windows 2000 from windows 7, it all worked fine a few months ago. I haven't had the win 2000 computer on for a while but recently needed to use the plotter. I now get a log-on error when trying to access the win 2000 from the win 7, but it shows up on networks. The log-on error window shows a domain with the name of the windows 7 computer listed as the domain name, but nothing is set to be on a domain. I can access the files on the windows 7 computer from the win 2000 computer with no issues in that direction. There is no home group set up (think that was the issue the first time) Windows 7 is always updating itself and I suspect that's part of the problem, I am guessing something went back to a default during an up-date but I can't find it.

View 3 Replies View Related

Servers :: ISA Server 2000 Networking - Connecting Ubuntu Desktop?

Jan 27, 2012

windows server 2003,ISA server 2000 Networking :: Connecting ubuntu desktop?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Integration With AD Windows 2000 Advanced SP4?

Dec 13, 2012

I'm having a issue when configuring Cisco ACS 5.2 appliance 1121 to integrate windows 2000 Active Directory as an External Users Database.I'm using an account with administrator privileges on AD (can create computer objects).The ACS register itself successfully to the domain but it doesn't retrieve the AD Groups, even when i change the seach base and filter.At this link says that ACS supports AD over Windows 2003, 2008 and 2008R2 but it doesnt say that not supports Windows 2000.[URL]

View 2 Replies View Related

No Ip Address Using Netgear Wireless Adapter On Windows 2000 Professional?

Jan 3, 2012

This is an older desktop, Been utilizing the net gear to get on the Internet for months and it was working fine,shows it is connected to ssid but ip shows up as 0.0.0.0 I have other home computers hooked up and work g so I located there ip address, can I input it myself ? If so how?

View 2 Replies View Related

How To Update Windows 2000 Settings For Gigabit Internet Speed

Mar 19, 2012

Have been running win 2000 pro for last 5 yrs with trendnet pcitxr 1 gigabit nic card. Never had any problem running & connecting. Now cannot access internet @ 1 gigabit, ok @100mbit, for the most part. sometimes browser will lock-up, firefox or IE. Never had any problems like this before. Have changed nic card, replaced cable modem, wires. Have delete trendnet software and reloaded, ran winsock fix, move router cables, ran directly from cable modem, bypassing router, move nic to new slot, ran ipconfig /release & reset. All to no avail. when I ping comes back good. NIC cards I have tried all seem to be working.

View 1 Replies View Related

Linksys Wireless Adapters :: Windows 2000 Pro SP4 WPC54GS Ver.2 No Connection

Jan 24, 2013

I had this card working on this notebook with Windows XP, but with only 256mb ram it ran too slow. So I went back to 2000 on it. But I can't get the card to work, I've tried using the setup, the link light on the card does flash on and off. But in the linksys program just says no association with access point and says WPC54GS is inactive. I tried just installing the driver when it detects it but that didn't work. Also I try to start the wireless configuration and just get error 1747 the authentication service is unknown. What do I need to do to get the card working on here so I have internet access? 

View 5 Replies View Related

Linksys Wireless Adapters ::Windows 2000 PC Can't Detect WMP54G

Nov 30, 2009

I just bought this wireless g pci card and installed the software from the cd on to a windows 2000 pc.  When I went to run the software I can only click on the exit button.  I looked on the forums and saw that for win 2000 you should only install the drivers by allowing your computer to detect the card.  I uninstalled the software but my computer wont detect the card now and if I reinstall the software I cant even open it up anymore.  The card is not listed in the device manager at all.  Would installing i the first time have created anything in the registry that would  have been left behind in the uninstall and would it be blocking the computer from detecting this as new hardware?

View 9 Replies View Related

Linksys Wireless Router :: Windows 2000 Laptop Not Connecting To EA3500

Sep 16, 2012

I have just purchased a new EA3500 router and have fairly painlessly managed to get my desktop (running Windows XP), my lap top (running Windows 7), ipads 1 and 2 and blackberry all to connect to the wireless hub. I even have it talking to a WD 1T external hard drive.
 
BUT try as I might I can't get an old sony vaio running windows 2000 professional to connect to the internet. It talkes to the box and even allows the lap top to hop on as a guest but it goes through to a guest sign on web page and no matter what combination of passwords (i am sure i have the write guest sign on) it just refuses to actually connect. I never had a problem connection to our previous wireles router.

View 9 Replies View Related

Cisco Routers :: WRVS4000 VPN Client Installer On New V2 Runs Only In Windows 2000 Or XP

Aug 18, 2011

I just got my first WRVS4400N v2.Nothing has changed, the definition of small business means there are USUALLY one office, and several people runs around thus the need of a VPN server sitting at the home office Router. I think most of us small business operators had wished for a connection away from office, NO REMOTE GROUPS, just clients on phone, or laptop. Using this connection to get to some files which isn't sitting in the cloud, or perhaps using it to hop over firewall restrictions that some overseas countries had imposed.
 
What you should have is a setting for Stand-alone VPN server, NOT Router to Router.. What you should have is feature that generates the various psk for different platforms. What you should have is made things simple, instead of these magicabbage which goes no where for the small businesses.Through out this thread the original poster is presenting the same problem, he and I don't have a Remote Group router to enter an IP address, tell us to use the QuikVPN client DON'T work, the Server isn't UP to begin with!Moreover, the VPN client installer on the this new v2 runs only in Win 2000 or XP??? What the (*&^! Doesn't seem like a large business like Cisco should have in their boxes.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G / Unable To Connect Laptop With Windows 2000?

Jul 7, 2012

I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.

View 9 Replies View Related

Linksys Wireless Adapters :: Install WMP54G PCI Version 4.1 In Windows 2000 Pro SP4 Computer?

Mar 26, 2011

I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer.  I ran the setup cd before installing the card, then took out the disk.  After installing the card and powering the computer, the Available Wireless Network screen didn't appear.  I also didn't get the Network Monitor icon on the taskbar.  Network Monitor appears in the start menu, but can't be started.  Device Manager says the card is working properly and there are no conflicts.
 
I uninstalled the software, removed the card, and repeated the installation process with the same end result.  The card light blinks like it is receiving data.  I'm using a Linksys WRT54G2 router.  Both my desktop (W7) and my laptop (Vista) connect just fine.  How can I get my W2K computer on the network?

View 5 Replies View Related

Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2

Jul 5, 2012

I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?

View 2 Replies View Related

Web Server Static IP?

Jun 17, 2012

pool of static IP given by ISP, i want to run my web server,whats the best way to configure my web server behind router and assign Static IP for it. i will use static ip for router or web server??

View 5 Replies View Related

Proxy Server Software For NAT Static IP

Feb 13, 2012

I have an Static IP address and I want to hide this Static IP address from users. But I dont have router I searched on internet and I got Winproxy software which can does this work but that is only trial version. How to hide my static IP? Any software like Winproxy which works on my server like proxy server i.e protect server from viruses, theft, hackers, Trojens etc.?

View 4 Replies View Related

Add Static Route For New Exchange Server?

Sep 11, 2012

Add static route for new exchange server?

View 1 Replies View Related

Cisco :: Internal Server Is Not Accessible From Outside Static?

Mar 23, 2013

I have nated my 172.81.15.0 255.255.255.0 into my internal server 10.1.10.164 , i can ping the out side server but the internal server is not accessible from out side static (Database-Servers,interface-sms) 172.81.15.2 10.1.10.164 netmask 255.255.255.255icmp permit 172.81.15.0 255.255.255.0 interface-smsroute zemen-sms 172.81.15.0 255.255.255.0 10.131.199.201 1access-list Database-Servers-in extended permit tcp host 10.1.10.164 host 10.185.62.144 eq 9090access-list Database-Servers-in extended permit tcp host 10.1.10.164 host 10.185.62.144 eq wwwicmp permit host 10.185.62.144 interface-smsi can ping the out side server 10.185.62.144 with out a problem . from the server 10.185.62.144 i can ping untill 172.81.15.2 and it will not ping the natted server 10.1.10.164. as u seen the accesslist ping is permitted.

View 1 Replies View Related

Static Ip Is Not Working On Server 2008 Via VMWare 0.7?

Nov 2, 2011

I install virutal machine "VMWare Workstation7" on windows 7, i am mcitp student for practice i am using windows server 2008 on VMWare, but i can't assign static ip whenever i assign ip it show no access to the internet?

View 3 Replies View Related

Linux Server With Two Static Ip - Public / Private

Dec 14, 2011

Is there a simple way to have a web server have both a static public ip (I have a block of static IP's) and an static private ip (ex 192.168.0.60)? I am running a web project management application....

View 4 Replies View Related

D-Link DAP-1522 :: DNS Server Not Shown In Static IP

Mar 16, 2012

Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore.

View 4 Replies View Related

Windows 7 - How To Use Static IP With Wireless Internet

Jun 4, 2011

I am using ethernet because when I want to use a static IP (IPv4 address), it gives me no internet access if I use wireless. For ethernet, it lets me get access. How do I use wireless and use a static ip?

Set Static IP Address in Windows 7 | MacLochlainns Weblog

View 8 Replies View Related

Windows 7 Is Communicating The Static Ip Automatically?

Feb 21, 2013

I am using windows 7 OS(32-bit) and it is creating automatically the sessions and communicating with different static ip's.I have find out by using netsat -n command

TCP 192.168.3.22:50746 210.210.113.83:80 SYN_SENT
TCP 192.168.3.22:50747 210.210.113.81:80 SYN_SENT

View 3 Replies View Related

Changing Static IP Address On Windows 7 To A New One?

Jun 10, 2012

I've had the same IP address for years and want to change it to a new one - I have a dynamic IP but for some reason it will never change.It looks as if it's always static-what settings I need to change on Windows 7 to get it to roll over onto a new IP address?

View 1 Replies View Related

MSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?

Jan 10, 2013

i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:

PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication

Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.

However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.

My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved