Am switching from windows95 to Windows 2000 Professional, & During the Pre - Installation preparations, I discovered that the Machine contains a LAN Card, But i cant find it in the HCL FOR WINDOWS 2000 PROFESSIONAL.What should i do to get the system back in the service?
View 1 Repliesi have new laptop and trying to vpn into office with static ip. and the rdp into work station. vpn connects fine although says iv6p has no network access.. and rdp will not connect
View 3 Replies View Relatedi need a software for webstar 2000 for windows 7
View 1 Replies View RelatedI have a windows 7 computer and a windows 2000 on a wired network. The windows 7 and 2000 previously played nicely although it was a bit of a pain to get it to work the first time, don't really remember what the issue was. I have a big old CAD plotter connected to a parallel port on the windows 2000 computer and previously was able to use it from the windows 7 computer. I was also able to access any file on the windows 2000 from windows 7, it all worked fine a few months ago. I haven't had the win 2000 computer on for a while but recently needed to use the plotter. I now get a log-on error when trying to access the win 2000 from the win 7, but it shows up on networks. The log-on error window shows a domain with the name of the windows 7 computer listed as the domain name, but nothing is set to be on a domain. I can access the files on the windows 7 computer from the win 2000 computer with no issues in that direction. There is no home group set up (think that was the issue the first time) Windows 7 is always updating itself and I suspect that's part of the problem, I am guessing something went back to a default during an up-date but I can't find it.
View 3 Replies View RelatedI'm having a issue when configuring Cisco ACS 5.2 appliance 1121 to integrate windows 2000 Active Directory as an External Users Database.I'm using an account with administrator privileges on AD (can create computer objects).The ACS register itself successfully to the domain but it doesn't retrieve the AD Groups, even when i change the seach base and filter.At this link says that ACS supports AD over Windows 2003, 2008 and 2008R2 but it doesnt say that not supports Windows 2000.[URL]
View 2 Replies View Relateddisable protection sharing win server 2000
View 1 Replies View RelatedThis is an older desktop, Been utilizing the net gear to get on the Internet for months and it was working fine,shows it is connected to ssid but ip shows up as 0.0.0.0 I have other home computers hooked up and work g so I located there ip address, can I input it myself ? If so how?
View 2 Replies View RelatedI have a domain with a domain controller Server 2003. I have a backup dc running an application with server 2008. The shared folder I am trying to access is on an nt server 2000. We have had a mapped drive "I:" and have used it for years. Our copier also scans to a shared folder on the server 2000 machine. All of the desktop systems are xp sp3 with one W7 machine. A couple of weeks ago when user attempted to access the shared/mapped drive, an error would occur that "the drive was in use and they could not be logged on". Sometimes the error would say "you don't have permission to access the drive." Mind you no settings have been changed on the network. When either of these errors would occur it would occur for everyone but if I rebooted the server everyone could connect again. The same errors would occur the next day or 6 - 8 hour later. Now the error has occured "Drive is already in use and you cannot be logged in" (I have tried drive Z as well the drive is not in use) and restarting the serever no longer works. No one can access the shared drive. I have unmapped the drive on my system and have attempted to reconnect, I enter the path and check reconnect at logon and it asks for a password. I enter the administrator password (which is what I always used) and it just pops right back up asking for a password as if I entered nothing. I can ping the server with the shared folder and even logon remotely so I know it is not a physical disconnect. I am not sure what changed and have followed many suggestions found to no avail. We cannot access the shares or scan.
View 1 Replies View RelatedHave been running win 2000 pro for last 5 yrs with trendnet pcitxr 1 gigabit nic card. Never had any problem running & connecting. Now cannot access internet @ 1 gigabit, ok @100mbit, for the most part. sometimes browser will lock-up, firefox or IE. Never had any problems like this before. Have changed nic card, replaced cable modem, wires. Have delete trendnet software and reloaded, ran winsock fix, move router cables, ran directly from cable modem, bypassing router, move nic to new slot, ran ipconfig /release & reset. All to no avail. when I ping comes back good. NIC cards I have tried all seem to be working.
View 1 Replies View RelatedI had this card working on this notebook with Windows XP, but with only 256mb ram it ran too slow. So I went back to 2000 on it. But I can't get the card to work, I've tried using the setup, the link light on the card does flash on and off. But in the linksys program just says no association with access point and says WPC54GS is inactive. I tried just installing the driver when it detects it but that didn't work. Also I try to start the wireless configuration and just get error 1747 the authentication service is unknown. What do I need to do to get the card working on here so I have internet access?
View 5 Replies View RelatedI just bought this wireless g pci card and installed the software from the cd on to a windows 2000 pc. When I went to run the software I can only click on the exit button. I looked on the forums and saw that for win 2000 you should only install the drivers by allowing your computer to detect the card. I uninstalled the software but my computer wont detect the card now and if I reinstall the software I cant even open it up anymore. The card is not listed in the device manager at all. Would installing i the first time have created anything in the registry that would have been left behind in the uninstall and would it be blocking the computer from detecting this as new hardware?
View 9 Replies View RelatedI have just purchased a new EA3500 router and have fairly painlessly managed to get my desktop (running Windows XP), my lap top (running Windows 7), ipads 1 and 2 and blackberry all to connect to the wireless hub. I even have it talking to a WD 1T external hard drive.
BUT try as I might I can't get an old sony vaio running windows 2000 professional to connect to the internet. It talkes to the box and even allows the lap top to hop on as a guest but it goes through to a guest sign on web page and no matter what combination of passwords (i am sure i have the write guest sign on) it just refuses to actually connect. I never had a problem connection to our previous wireles router.
I just got my first WRVS4400N v2.Nothing has changed, the definition of small business means there are USUALLY one office, and several people runs around thus the need of a VPN server sitting at the home office Router. I think most of us small business operators had wished for a connection away from office, NO REMOTE GROUPS, just clients on phone, or laptop. Using this connection to get to some files which isn't sitting in the cloud, or perhaps using it to hop over firewall restrictions that some overseas countries had imposed.
What you should have is a setting for Stand-alone VPN server, NOT Router to Router.. What you should have is feature that generates the various psk for different platforms. What you should have is made things simple, instead of these magicabbage which goes no where for the small businesses.Through out this thread the original poster is presenting the same problem, he and I don't have a Remote Group router to enter an IP address, tell us to use the QuikVPN client DON'T work, the Server isn't UP to begin with!Moreover, the VPN client installer on the this new v2 runs only in Win 2000 or XP??? What the (*&^! Doesn't seem like a large business like Cisco should have in their boxes.
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies View RelatedI'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
Just re-installed windows on a laptop i got, i got all the drivers installed, but i cant seem to get the wireless card to show up, i know it has wireless because it was my moms laptop before she got a new one. Ive gone to dell support site and literately downloaded all the drivers on the page. Device manager doesn't seem to be detecting the card at all, the dell Wlan utility wont even start ive reinstalled the driver multiple times i even tried the intel site for drivers.
The big problem is i don't know what wireless card it is and its hard to find out because the support pdf for the laptop shows multiple possible cards.
[URL]
I have found this device to connect my pc to my network. My pc will be running win 7 but in the description of the product it says that the device does not support win 7Does this means that the device will not be able to operate at all with win 7??
View 4 Replies View RelatedI have an ASUS M4A785-M MB with an on-board LAN and all of a sudden stopped working yesterday. I have it connected to a 4-port D-Link network switch which has one other computer connected, and the switch is hard-wired to my wireless router.
Here are the trouble-shooting steps I've tried:
- uninstalling/re-installing the driver
- tried using different wires.
- by-passed the switch
- used the wired connection with the other computer
- tested the wire for my troubled computer on the other computer and it works fine
- pinged the loop-back IP address (127.0.0.1) and it tested ok
- bought a new NIC and still no connection
When I go to Network and Sharing Center, it shows my Home GRoup but then has the bid red X from the Home Group to the Internet.
I have a (legacy) bt speedway ISDN card currently in a machine running XPI want to move it to a newer machine running Win 7.Does anybody know how to find the drivers?
View 1 Replies View Relatedhow can i share my Internet connection using 2 LAN card without router to my another pc
View 1 Replies View RelatedTrying to get on internet in Windows 7. Have connected to wireless network. Am hardwired to router and yet cannot connect to Internet. Wireless Network Connection 2 is not connected and therefore not going to the Internet
View 2 Replies View RelatedBrand new MSI system using windows 7. we're using a wirless network in the house, and up until today it's been fine. Randomly, Windows is no longer detecting any networks.
I've confirmed there is no prob with the router or signal as I can detect the network in my room and connect to the internet (using a homeplug hardline). I've tried enabling and disabling both the router and wireless card, a system restore (windows made no changes), and when I came to use the windows 7 troubleshooter - it says the device is not enabled?
I run a windows 7 x64 and I am currently running a Intel (r) 82579V gigabit network adapter. The thing is, the driver was made for 82579LM and V versions. Most of the time, my computer reads the adapter as the LM version, in which the ethernet just won't work. Once in a while it gets the V version and everything is alright, but i can't live with such uncertainty. Mostly people suggest i should just buy a new motherboard (?) or a new network adapter, but i'm sure it's a software problem. Shouldn't there be other solutions? The card itself is integrated.
View 12 Replies View RelatedRecently I dual-booted my PC from Windows XP(On which the LAN card was working and i was able to access the internet) to Windows 7.Then i formated the drive on which WinXP was installed. Sometime later i noticed that the LAN card (Atheros A8151 PCI-E Ethernet Controller) was not working i went into the adapter settings in network control in the control panel and there was no adapter. i checked the device manager and there was no option called NETWORK ADAPTERS.
View 14 Replies View RelatedI'm off to university on Monday but I couldn't afford a laptop (I have a huge Dell gaming desktop!) so my awesome parents gave me their little Acer Aspire One D260-A netbook; Intel Atom Processor N450 (1.66GHz, 512K), 1GB, 160GB HDD. It's a couple of years old, was running XP and literally everything was broken - no sound, no backlight, faulty touchpad etc. - so first port of call was a clean install of Windows 7 and updating every driver (and BIOS) off the Acer website from a USB.Problem is, everything is running like a dream... except for the wireless. When I tried to install the latest Atheros drivers (doing all of this from a USB due to lack of connectivity) I received a Code 10: driver cannot start error, so after some troubleshooting I was pointed towards different drivers, only for Windows to inform me that it can't find the hardware.
Looking in devices, I'm seeing an Atheros Ethernet connection device but the wireless card seems to have taken a walk. Xirrus isn't seeing anything either. My current internet is between Virgin and BT (mine and my partner's house) but we move in together on Monday and we'll be setting up Sky, so I can't give you much information on internet. I do have an ethernet cable I can plug into our Virgin wifi home router (D-Link DSL-2640R Broadband Wireless G ADSL2+) if need be. One of my main problems seems to be finding the correct drivers as due to the wireless card disappearing, I'm not sure how to tell what the wireless hardware actually is.
Here are the finer details:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CJ-Netbook
Primary Dns Suffix . . . . . . . :
[code]....
If it is, can you point me to the correct drivers page as I cannot find it.
View 1 Replies View Relatedafter installing xp my wireless card doesnt show in device manager
View 8 Replies View RelatedI've just installed a clean Windows 7 Ultimate on a brand new Acer Aspire 5750.The lan nor wireless didn't work out of the box. After installing the Gigabit lan drivers it found the network card But it can't find the wireless. When I try to install the Wireless drivers from: [url]It's the Atheros card I have. So when I try to install the Wireless Lan Atheros drivers it sais:"The device doesn't exist. Please plug the device back in and try again" What do I do now? It's a laptop, I can't exactly remove the network card.
View 1 Replies View RelatedI got my wife a new laptop in October, and it runs on windows 7, since the 25th of december she has been having connectivity issues with her wireless card. She had 2 bars on her signal strength, and I wanted to take the signal strenght out of the equation, so I got a N range booster to put in the room she is usually in, she now has a signal strength of 5 bars. However she still loses connection to the internet.
ISP is Bell Fibe 25 Router is the bell modem/router in one. My son's Laptop goes in that room, and has no issues. I have made sure the drivers are up to date on both the router/modem, and on the laptop itself. The only thing I cna think of is that it is the card itself that is faulty.
First network card have the static IP address 82.x.x.30 from the ISP.The second network card have 2 IP addresses: 192.x.x.0 and 82.x.x.1 ( first IP is for LAN and second IP is for routing the additional IP class).In other words if i have the computer "Z" with configuration: IP: 82.x.x.100 Sub: 255.255.255.128 and GTW:82.x.x.1 i can access the internet but practically with with the IP from ISP wich is 82.x.x.30
View 1 Replies View RelatedHave had my XPS One 27 for a few days and the 1703 wireless card has cut my download speeds more than half. Whereas I was getting anywhere from 75 to 80 Mbps on my previous machine with a b/g/n/ wireless card, I am now only able to get 25 to 30 Mbps on this new machine. Nothing has changed on my router, I just plugged in the XPS One 27 and it automatically found the router and I logged in without a problem. The router is the WNDR 3700. I am on a 105Mbps tier and need my download speed restored to what I used to get. Is there a "tweak" or is there a better wi-fi card I can install?
View 5 Replies View RelatedI downloaded Windows 8 on the first day of it's public release. I have an Inspiron 1545 laptop. As soon as I installed W8, my wireless card stopped working. Is there any chance that W8 drivers will be released anytime soon? I am very dependent on my laptop and need to get it up and going again.
View 5 Replies View RelatedI just bought a new Dell Inspiron 3520 (service code: <Admin Note: removed per privacy policy~RK>) which came with Ubuntu. Although I had to install windows 7 32 bit and I am facing a driver issue with wireless adapter. When I try to connect to the preferred network I get "Unidentified Network - No Internet Access".
I know this is a driver problem because it works well on Ubuntu. So as the original configuration from Dell site lists: "WIRELESS : DELL WIRELESS 1703 CARD"
so I downloaded this driver : {URL}, with no success. Is there anything I can do?