I have found this device to connect my pc to my network. My pc will be running win 7 but in the description of the product it says that the device does not support win 7Does this means that the device will not be able to operate at all with win 7??
View 4 RepliesFrom all of the documentation I am seeing, the 2911 does not support the NM-E3/T3 serial card.
View 16 Replies View RelatedI purchased a Latitude E6220 with a 4G WWAN modem (the DW5800). My intention was to support DirectAccess, i.e. Microsoft's clientless VPN, but unfortunately I have not found any way to get the IPv6 protocol installed on the device.
I've searched Verizon Wireless, Dell and Novatel Wireless forums without any success.
Just re-installed windows on a laptop i got, i got all the drivers installed, but i cant seem to get the wireless card to show up, i know it has wireless because it was my moms laptop before she got a new one. Ive gone to dell support site and literately downloaded all the drivers on the page. Device manager doesn't seem to be detecting the card at all, the dell Wlan utility wont even start ive reinstalled the driver multiple times i even tried the intel site for drivers.
The big problem is i don't know what wireless card it is and its hard to find out because the support pdf for the laptop shows multiple possible cards.
[URL]
Trying to get on internet in Windows 7. Have connected to wireless network. Am hardwired to router and yet cannot connect to Internet. Wireless Network Connection 2 is not connected and therefore not going to the Internet
View 2 Replies View RelatedBrand new MSI system using windows 7. we're using a wirless network in the house, and up until today it's been fine. Randomly, Windows is no longer detecting any networks.
I've confirmed there is no prob with the router or signal as I can detect the network in my room and connect to the internet (using a homeplug hardline). I've tried enabling and disabling both the router and wireless card, a system restore (windows made no changes), and when I came to use the windows 7 troubleshooter - it says the device is not enabled?
I'm off to university on Monday but I couldn't afford a laptop (I have a huge Dell gaming desktop!) so my awesome parents gave me their little Acer Aspire One D260-A netbook; Intel Atom Processor N450 (1.66GHz, 512K), 1GB, 160GB HDD. It's a couple of years old, was running XP and literally everything was broken - no sound, no backlight, faulty touchpad etc. - so first port of call was a clean install of Windows 7 and updating every driver (and BIOS) off the Acer website from a USB.Problem is, everything is running like a dream... except for the wireless. When I tried to install the latest Atheros drivers (doing all of this from a USB due to lack of connectivity) I received a Code 10: driver cannot start error, so after some troubleshooting I was pointed towards different drivers, only for Windows to inform me that it can't find the hardware.
Looking in devices, I'm seeing an Atheros Ethernet connection device but the wireless card seems to have taken a walk. Xirrus isn't seeing anything either. My current internet is between Virgin and BT (mine and my partner's house) but we move in together on Monday and we'll be setting up Sky, so I can't give you much information on internet. I do have an ethernet cable I can plug into our Virgin wifi home router (D-Link DSL-2640R Broadband Wireless G ADSL2+) if need be. One of my main problems seems to be finding the correct drivers as due to the wireless card disappearing, I'm not sure how to tell what the wireless hardware actually is.
Here are the finer details:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CJ-Netbook
Primary Dns Suffix . . . . . . . :
[code]....
VWIC2-1MFT-T1/E1 card support on 1841 Router ?any ios up-gradation required?
View 1 Replies View RelatedI'm looking for a HWIC card that will support SC fiber connections for a 2811. I know of the HWIC-1GE-SFP but this one only support the LC connections.
View 2 Replies View RelatedI have just buy a 10G card for Cat 6513, these are information: PDCMSFC-1>sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL08373Z37
7 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD08330322
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
7 Policy Feature Card 3 WS-F6K-PFC3A SAD083207AL 2.4 Ok
7 MSFC3 Daughterboard WS-SUP720 SAD0832037Y 2.3 Ok
About card: WS-X6716-10G-3C
When I install this card on Cat 6513, has a message: " fan tray no support"
Does the AE1000 Adapter support Windows Pro 64 bit? If it doesn't, is there any Linksys adapter that does?
View 9 Replies View RelatedIs NPS (windows 2008R2) supports EAP-TLS? I've built an NPS to authenticate wireless clients (WLC 2504). But in the EAP types I only see EAP(PEAP) this only requires a certificate on the server side.
I want the clients also should have a certificate, for that the NPS should support EAP-TLS
after installing xp my wireless card doesnt show in device manager
View 8 Replies View RelatedI've just installed a clean Windows 7 Ultimate on a brand new Acer Aspire 5750.The lan nor wireless didn't work out of the box. After installing the Gigabit lan drivers it found the network card But it can't find the wireless. When I try to install the Wireless drivers from: [url]It's the Atheros card I have. So when I try to install the Wireless Lan Atheros drivers it sais:"The device doesn't exist. Please plug the device back in and try again" What do I do now? It's a laptop, I can't exactly remove the network card.
View 1 Replies View RelatedI got my wife a new laptop in October, and it runs on windows 7, since the 25th of december she has been having connectivity issues with her wireless card. She had 2 bars on her signal strength, and I wanted to take the signal strenght out of the equation, so I got a N range booster to put in the room she is usually in, she now has a signal strength of 5 bars. However she still loses connection to the internet.
ISP is Bell Fibe 25 Router is the bell modem/router in one. My son's Laptop goes in that room, and has no issues. I have made sure the drivers are up to date on both the router/modem, and on the laptop itself. The only thing I cna think of is that it is the card itself that is faulty.
I just bought a new Dell Inspiron 3520 (service code: <Admin Note: removed per privacy policy~RK>) which came with Ubuntu. Although I had to install windows 7 32 bit and I am facing a driver issue with wireless adapter. When I try to connect to the preferred network I get "Unidentified Network - No Internet Access".
I know this is a driver problem because it works well on Ubuntu. So as the original configuration from Dell site lists: "WIRELESS : DELL WIRELESS 1703 CARD"
so I downloaded this driver : {URL}, with no success. Is there anything I can do?
I have a Linksys wmp200 wireless adapter in my PC, and will installing windows 7 pro 64bit in a few days. I was wondering, does the wmp200 support Windows 7 64bit? If not, how can I get it working? It is very important that the internet works on this PC, so im hoping for minimal issues.
View 3 Replies View RelatedI walked in to the room and my 1 year old daughter was carrying my laptop. I turned it on and now I no longer have the option to connect to wireless networks. It's like the computer doesn't recognize a wireless card. I have an old dell with windows xp. At first thought I figured that she may had dropped it and dislodged the card, so I took the cover of the slot off and everything seems to be in place. The wireless card is a broadcom.
View 3 Replies View Relatedtrying to connect an old PC to my home wireless network.I brought home a PC I have used for years at my office. I have it configured with a Realtek wireless card and was able to connect it to my office wireless network without a problem.But, when I try to set it up at home, it won't take. I have a dlink router that is working fine with several Mac computers in my home, so I know the router and network are up and running fine.The PC uses Windows XP. The icon in the lower right corner says dlink is connected and there is strong signal strength. However, when I check the dlink status, it shows that 2,573 "packets" are sent, while "0" are received.I've tried to connect to the internet using Mozilla, Safari, and Explorer. Each says the server cannot be found and that the internet is not connected.
View 5 Replies View RelatedI recently updated to Windows 8, and before updating, Windows 8 setup recognized the drivers for my Belkin G Desktop wireless card. After installation, my system was able to connect to my wi-fi network without any problem. However, due to the power going off at my home, an automatic update on Windows 8 got interrupted.
Since then, it has caused a ton of problems, which caused me to finally re-install Windows 8. Now, however, it does not recognize the wireless card and its drivers, and does not let me install from the CD, or through any alternate sources ?
Cisco 1900 , 2900 and 3900 have Interface Slots and Service Module Slots , My question is which type of card is support this slot.
View 6 Replies View RelatedRegion : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I'm trying to install the USB Printer Controller software in Windows 8 Professional x64 but I can't. Seems that the software is not compatible because I get an error window "Control center installation is imcomplete! Please reinstall again."I'm installing the official version of my download page [URL]Is there any solution to use the print server in Windows 8?
The last update was the following. 03/31/2010 Ver.3.0.10.0 Here we are well over a year later and no update at all. What is going on?
View 4 Replies View Relatedfind a Driver for the NIC for windows 8 64 bit Pro. I have a Dell Latitude E6410 and the driver from Microsoft worked for the most part but I was having issues connecting to my Windows phone 8 device (Nokia 920). First I though it was my phone but when I tried other devices like my Surface I could connect with no problem. I am also running Windows 7 32 bit, when I boot up that OS I had no issues connecting to my phone. I also had issues with stable connections to my 5Ghz Wi-Fi access point. Well if any of these symptoms sound like something that you been going through then check this driver out. I used the 43224AGN 802.11 a/b/g/n 2x2 driver and now everything seems to work.
View 2 Replies View RelatedDoes Nexus 7K support Multiple VDCs sharing ports on a single line card. One of our cisco parnter engineers stated that cisco doenst recommend using same line card for multiple VDCs.The second VDC (Non-Default VDC) will be used four our Outside, and DMZ Segment, and to phyiscally segregate our Firewall from our Internal/Inside Core Switch without using a physical DMZ Switch.I know Cisco used the Nexus in this way in their PCI DSS 2.0 Compliance Document. Module is N7K-M148GT-11L
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
1 48 10/100/1000 Mbps Ethernet XL Mod N7K-M148GT-11L
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
1 48 10/100/1000 Mbps Ethernet XL Mod N7K-M148GT-11L
Am switching from windows95 to Windows 2000 Professional, & During the Pre - Installation preparations, I discovered that the Machine contains a LAN Card, But i cant find it in the HCL FOR WINDOWS 2000 PROFESSIONAL.What should i do to get the system back in the service?
View 1 Replies View RelatedThis past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedI planned to install a LMS 4.0.1 Windows platform. I would like to know if LMS 4.0.1 supports only US Windows version (2003 or 2008) or if it supports also local (French) Windows version.
View 3 Replies View RelatedI have an ASUS M4A785-M MB with an on-board LAN and all of a sudden stopped working yesterday. I have it connected to a 4-port D-Link network switch which has one other computer connected, and the switch is hard-wired to my wireless router.
Here are the trouble-shooting steps I've tried:
- uninstalling/re-installing the driver
- tried using different wires.
- by-passed the switch
- used the wired connection with the other computer
- tested the wire for my troubled computer on the other computer and it works fine
- pinged the loop-back IP address (127.0.0.1) and it tested ok
- bought a new NIC and still no connection
When I go to Network and Sharing Center, it shows my Home GRoup but then has the bid red X from the Home Group to the Internet.
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedI just purchased the RVS4000 v2 to replace an old Netgear FVL328 VPN router which no longer met VPN needs. Despite the poor reviews for the RVS4000, it seems as though Cisco has solved many of the issues with the firmware releases of the last few years. However, I was just reading a post by someone attempting to connect Win 7 machines via VPN tunnel and it was not supported. I'd like to know if this is still an issue, as we stopped using VPN with the former Netgear router, instead relying on teamviewer (but I'd much rather reconfigure a VPN).
View 1 Replies View RelatedI have a (legacy) bt speedway ISDN card currently in a machine running XPI want to move it to a newer machine running Win 7.Does anybody know how to find the drivers?
View 1 Replies View Relatedhow can i share my Internet connection using 2 LAN card without router to my another pc
View 1 Replies View Related