I planned to install a LMS 4.0.1 Windows platform. I would like to know if LMS 4.0.1 supports only US Windows version (2003 or 2008) or if it supports also local (French) Windows version.
View 3 RepliesWe've had an old netbeui network set up for a while now but recently switched over to TCP/IP so my computer (running Windows 7 x64) could connect. The other computers on the network are running Windows 2000 and XP.All the older computers are working, but I still can't get mine to connect. It shows up as "Unidentified Network: Public Network"I really don't know where to go from here. I don't know if it should just pop up automatically or if I am supposed to configure it somehow.
View 5 Replies View RelatedMy laptop has windows 7 , its connected to the internet wireless , now , i want transfer files from my desktop to the laptop so i cannect them with an ethernet cable.. now how i can make that happen , my desktop has window xp
View 1 Replies View RelatedMy Laptop will only connect to the internet if I directly connect the ethernet cable from the router to the computer. Otherwise it will 'connect' local only[CODE]
View 1 Replies View RelatedI can connect to my LAN at home and now am away for the winter and my wife's laptop connects automatically and mine will not detect a network with the same exact hookup
View 1 Replies View RelatedIve got my home lab setup with two 2610 routers hooked togeather with a DTE/DCE Crossover and I have OSPF configured on both routers. Each router has one 3550 switch connected to each FA0/0 inteface. The issue is that Everything can be pinged except my windows 7 PC connected to the R1 LAN. Everything else can be pinged from any other device. I checked the PC gateway configuration, disabled the firewall and checked my switch configuration! Is their something that I need to change in Windows?
Windows PC ------------ 3550 Switch-------------R1-----------------------------------R2---------------------3550 Switch----------------------Linux Box
Windows PC can't ping past the FA0/0 interface between the switch and R1
I just did a fresh install of xp on a work computer(virus, nasty stuff), and now it will not connect to our office network. I've had to do this before, and we had an outside guy come in. He took two seconds in the cmd prompt and fixed it. I've reinstalled all the drivers and I did a network diagnostic. The only spot it's showing a fail is at the dnssearchorder
View 14 Replies View RelatedI have the exact same problem: network adapter disconnects itself and I am unable to disable and enable it again, because it is unresponsive under the device manager and the network and sharing center. The only solution is to reboot the computer, where I can then have access to the network adapter and can reset it.This is since I upgraded windows vista to windows 7 4 days ago. I have upgraded all the driversI have uninstalled the network adapter driver and rebooted, and reinstalled the latest update with no difference.Running the computer in safe mode with networking has not yielded a crash so far, but have not tested this enough.I have tried disabling IPV6 as some people have said this could be reason, but it still crashes.It is somewhat different from what many people mention as I cannot reset the connection without rebooting (which I could live with). I do not use torrents or any site like that.
View 1 Replies View Relateddhcp is not enabled for local area connection in windows 7" my error is this and each time when I on my pc it will ask for a new connection..
View 2 Replies View RelatedI build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies View Relatedwindows 8 laptop how do i turn on LAN connection
View 3 Replies View RelatedI just purchased the RVS4000 v2 to replace an old Netgear FVL328 VPN router which no longer met VPN needs. Despite the poor reviews for the RVS4000, it seems as though Cisco has solved many of the issues with the firmware releases of the last few years. However, I was just reading a post by someone attempting to connect Win 7 machines via VPN tunnel and it was not supported. I'd like to know if this is still an issue, as we stopped using VPN with the former Netgear router, instead relying on teamviewer (but I'd much rather reconfigure a VPN).
View 1 Replies View RelatedI have found this device to connect my pc to my network. My pc will be running win 7 but in the description of the product it says that the device does not support win 7Does this means that the device will not be able to operate at all with win 7??
View 4 Replies View RelatedMy computer is running on Windows 7. It has had no prior internet connection problems. It is wired to my DV-2020 router. My internet suddenly disappeared, as in, it doesn't work anymore. I'm not sure as to when it disappeared due to my personal absence, but from what I heard it was either during 'starting a game' or 'installing firefox add-ons updates'. Internet does work on other computers sharing the same internet (wired and wireless). On the computer that does not have access to internet it gives a "local area connection - No Network Access" and "local area connection - unidentified network." So far I've tried:
A system restore.
Restarting the router (at home as well as the provider)
Changing wiring.
Disabling / Enabling.
Disabling virusscanner.
So I built a PC recently, using Powerline for Internet access. At first the PC wouldn't connect to the Internet so I moved the wireless router and the Powerline plug into another room and plugged them directly into the wall socket (previously they were plugged into an extension lead). I got Internet access on my PC, but 2 laptops and another PC were having trouble connecting to the Internet using Wi-FiWhen I moved the router and Powerline plug back to their original place, my PC wouldn't connect again (all other computers could) and I got the "Local Area Connection doesn't have a valid IP configuration" error from the network troubleshooting tool.So it's either I'm the only one that does get Internet when I move the router, or I'm the only one that doesn't get Internet when the router's in its normal place.[CODE]
View 3 Replies View RelatedMy computer can no longer connect to the internet. As I do not use an Ethernet cable, my concern is the wireless aspect. I am running Windows 7 on an HP laptop, and when I troubleshoot the problem all it pops up with is "Local Area Connection 4 adapter is disabled". When I try repairs as an administrator it just repeats the fact that the adapter is disabled, but does not provide a way for me to fix this. I have also tried going through Control Panel > All Control Panel Items > Troubleshooting > Network and Internet and selecting the network adapter option, selecting the Local Area Connection 4 to diagnose. It then said troubleshooting couldn't identify a problem.
View 2 Replies View RelatedI am running on Windows Vista and out of no where I cannot connect to my network %70 of the time. When I can connect I have local access and a full bar signal but no Internet access. But when I have internet access every page takes forever to load (if it even loads). I tried reinstalling my drivers and even hanged some registry stuff. My wireless card 8.11g by Broadcom.
View 3 Replies View RelatedI'm using a Netgear WGT624 Router for my firm's intranet. At home I'm using a router called NSW-R2 by Gembird..
What I want to do is connecting my PC at home (Windows XP) to my firm's intranet so I can print on my LAN Printer or edit files on my NAS.
I've heard about VPN tunnels, but I don't want to keep my firm PC on 24 hours a day. So is it somehow possible, to build a VPN or something similar by only using the Netgear WGT624 Router?
Edit/More Information: I've steup a DDNS. My Router supports Port-Forwarding. I'm currently using Remote Desktop. Both PC run Windows XP Professional.
Is NPS (windows 2008R2) supports EAP-TLS? I've built an NPS to authenticate wireless clients (WLC 2504). But in the EAP types I only see EAP(PEAP) this only requires a certificate on the server side.
I want the clients also should have a certificate, for that the NPS should support EAP-TLS
We are deploying BYOD with Cisco ISE 1.1.2 and WLC (5508) using 802.1x authentication.Windows clients cannot connect to 802.1x SSID with the following error on ISE:Authentication failed : 12321 PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
The client doesn't have preconfigured wifi profile or root certificate installed.The concept of BYOD suppose that you can connect your device without any installed certificates and preconfigured wifi-profiles.
The problem is that Windows 7 supplicant does not send TLS alert in pop up window, when connecting to 802.1x SSID.If this alert is seen, than you can accept it and proceed the connection. After that you will be asked to install ROOT-cert, get your own cert and etc.So, the question is: how to make the windows supplicant to show the pop-up window with TLS alert?
p.s. the attached file shows the example of pop up TLS-alert window
I have a problem with a direct crossover Ethernet connection between two computers. One is a Win XP laptop, the other a Win 7 64 bit desktop. I have a USB adapter on the desktop and the laptop used that to share internet with the desktop. This setup worked fine until today. There have been no network hardware changes nor software changes but the desktop's power supply recently failed and had to be replaced. After that was done I tried today to plug the adapter and cord back in and use the connection but it will not work. The connection from the modem to the desktop works fine but the connection from desktop to laptop will not detect internet access, says "Local area connection doesn't have a valid IP configuration" and has limited connectivity. Other than a new power supply absolutely nothing has been changed.
View 7 Replies View RelatedHave a Windows 7 desktop connected to a Netgear Router via a cable modem. Computer network is setup a Home Network / Access Type: Internet. Error Message:"Local Area Connection" doesn't have a valid IP configuration. Problem is fixed but the problem starts again the next time I start the desktop. Receive the error message once again.
View 7 Replies View RelatedI am using hp pressario C7000 with window 7 32 bits. Can not access the internet. The reports 'local area network doesn't have a valid ip configuration'.
View 1 Replies View RelatedDoes LMS 4.0 support Windows Server 2008 R2 Standard Edition (64-bit )?Is necessary for a fresh installation to download and install the Windows 2008 R2 patch?
View 2 Replies View Relatedget a status on Mac Lion and/or Windows 7 64-bit SSL VPN support for the RV220W? QuickVPN (for Windows 7 64-bit users) and IPSecuritas (for Mac Lion users) are our current workarounds, but for folks that use/own their own equipment we prefer SSL VPN. This is why we retired our WRVS4400N v2 for the RV220W.
View 3 Replies View RelatedDoes the AE1000 Adapter support Windows Pro 64 bit? If it doesn't, is there any Linksys adapter that does?
View 9 Replies View Relatedwhen I upgraded to windows 8 pro on inspiron 14r 4010, Bluetooth doesn't work. I installed all the latest drivers except the drivers for Bluetooth which didn't install...even tried compatibility. when I press the Bluetooth key ( sign marked on F2 key) nothing happaens....no any message. previously on windows 7 ultimate,it was working fine.
View 3 Replies View RelatedI am using a Lenovo ThinkPad X200 and want to setup a wired local area network.How could I achieve this?
Situation:I just want to connect to the internet and I have a cable connection at home.So, I just want to plug the cable line to my notebook (x200) so that I can access the internet via the cable.
But I don't know how to setup a local area connection in notebook. Since it automatically appear in my desktop, but not in my notebook.
I have a Linksys wmp200 wireless adapter in my PC, and will installing windows 7 pro 64bit in a few days. I was wondering, does the wmp200 support Windows 7 64bit? If not, how can I get it working? It is very important that the internet works on this PC, so im hoping for minimal issues.
View 3 Replies View RelatedRegion : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820
ISP :
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820
ISP : BT Infinity
I am running a Windows Home Server machine called "mserver" that has an IP address supplied via DHCP.There is also a local webserver running on port 8089 that I use to access media from several devices (Android Phone, Blackberry Playbook & HP Touchpad...i.e. not Microsoft).When I had the BT Homehub3 in use I could access the webserver via http://mserver:8089 and it would be loaded on all devices. With the WDR3600 used in place of the Homehub3 it cannot resolve mserver into a local IP address on a non windows device. I can access it via http://192.168.0.xxx:8089 so the route is there.Does the WDR3600 have any local DNS resolution? I repeat the BT HomeHub3 CAN do this, so why can't the TP-LINK?
P.S. I have tried :-
Disabling hardware NAT
Turning off UPNP & Port Forwarding
Restoring to factory default
Disabling all ALG's in security
Region : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I'm trying to install the USB Printer Controller software in Windows 8 Professional x64 but I can't. Seems that the software is not compatible because I get an error window "Control center installation is imcomplete! Please reinstall again."I'm installing the official version of my download page [URL]Is there any solution to use the print server in Windows 8?
The last update was the following. 03/31/2010 Ver.3.0.10.0 Here we are well over a year later and no update at all. What is going on?
View 4 Replies View Relatedi'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View Related