Use Pc As A Server For Ps2?

May 19, 2011

Is there any way to use pc as server for ps2.I have network access disc which allows to configure external network device.main reason is that i want access internet with ps2 via pc networking. i hav network card installed working fine as i share internet with ps2 from pc. My idea is that if i could use pc as server then i could redirect it to anypage[ex. google]

View 7 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5510 / Add A Mail Server In The LAN And A Webmail Using Port 3000 On The Server?

Jul 24, 2011

I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.

WAN ----- ISP Router ----------     FW     ---------- LAN -------- Mail Server + Webmail
|             (25) | (3000)
194.x.x.69    192.168.1.254                     192.168.1.6
 
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?

View 2 Replies View Related

MSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?

Jan 10, 2013

i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:

PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication

Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.

However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.

My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Unable To Select Folder Access / FTP Server / Media Server

Dec 9, 2012

I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server.  I click them and nothing happens.Also, the Cisco light on the router keeps blinking.

View 5 Replies View Related

Cisco Firewall :: ASA 5505 - Proxy Server Send Register To Hosted Server Private IP Changed

Aug 23, 2011

We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.

Here is debug log on real time monitoring.
 
Aug 24 2011    05:21:19    302015    203.xxx.xxx.226    192.168.1.51     Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011    05:21:19    607001    203.xxx.xxx.226         Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011    05:21:19    710005    203.xxx.xxx.226    99.xxx.xxx.107     UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063

Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.

View 2 Replies View Related

Windows 2003 Server - Dhcp Server Cannot Ping Client

Sep 29, 2011

i am facing the same problem now but am using windows 2003 server

View 1 Replies View Related

Cisco Application :: ACE 4710 Server In Multiple Server Farms

Jul 23, 2012

I put multiple rservers in multiple server farms?
 
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
 
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it?  Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.  

View 1 Replies View Related

Cisco Application :: CSS 11503 - Server-to-server Load Balancing?

Feb 16, 2012

I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
 
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
 
interface 1/1
   trunk
   vlan 1
    default-vlan
  vlan 555

[code]....

View 3 Replies View Related

Server 2008 - Share Internet Through DHCP Server

May 6, 2012

[code]...

I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server

View 10 Replies View Related

Can't Connect To Server 2008 Via Server Manager On Windows 7

Feb 11, 2011

I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.

View 18 Replies View Related

ITunes Server For Windows Home Server 2011?

Mar 10, 2011

Is there an iTunes Server for WHS 2011 available?

View 3 Replies View Related

Want To Connect Server With Windows Server 2003

Aug 28, 2012

After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.

View 2 Replies View Related

Server 2008 R2 Windows Server Backup

Dec 14, 2010

I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?

I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.

View 19 Replies View Related

Configure Windows Server As Both ISA Server And AD DC?

Jan 25, 2013

I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.

I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.

View 5 Replies View Related

How To Add New Server To An Array In ISA Server 2006

Jan 26, 2013

I created an Array but this array contains no server by default, could you show me a step-by-step guide to add a new server to this array, I've searched for hours but couldn't find anything talking about this, here is a snapshot of my ISA server 2006 management console, If there is no server included in that array, my ISA server can't work, can it?

View 1 Replies View Related

Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2

Jul 5, 2012

I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?

View 2 Replies View Related

Can't Find DNS Server Or Server IP

Mar 5, 2011

What happens is I can go on the internet normally i.e. watch videos, look up sites but when I go to play a game like Counter Strike I lose connection. I aslo occasionally lose connection when I'm just surfing the web but it happens most of the time when I play a game.According to the troubleshoot it says it can't find the DNS Server or the Server IP. I am running my computer off of a Linksys wireless usb because the room I am in dosen't have any phone lines.

View 18 Replies View Related

ISA Server As VPN Server?

Sep 12, 2011

i use ISA server 2006 behind ADSL router. The server is configured as a proxy server for web browsing.Can i use it as a VPN server for remote vpn clients to access a server in the internal LAN.

View 3 Replies View Related

Set Up Ftp Server In Mac Server Os X 10.6.4?

Jan 18, 2011

I am trying to set up the ftp server in a mac server os x 10 but I do not see the firewall tab under system preferences->sharing I do not see the services tab either. So I do not know how to enable the ftp.

View 1 Replies View Related

Deploying A Web Server

Sep 4, 2012

Is it necessary to understand web development to deploy a web server

View 5 Replies View Related

DNS For Exchange Server?

Apr 13, 2013

I am new to Exchange Server 2007 . I want to know that in order to implement Exchange Server do I need to register Domain name like [url]... ? OR A FQDN of Active Directory can work.Is it compulsory to register domain ?

View 3 Replies View Related

How To Dial Into A Server

Dec 6, 2012

The servers are calibrated to allow this, however I'm not sure how to connect from my end. I have an assignment where I have to dial into both a Windows server and an Ubuntu server to conduct some tasks (the actual process of dialing into the servers is not part of the assignment). I've been given the username, password, IP address, and protocol for each server. However, I cannot figure out how to use these to "dial into" them.I am running Windows 7 on a wireless connection

View 6 Replies View Related

Way To Create A Server

Dec 18, 2012

I am running windows 7 ultimate 32bit its been a long time that i've been trying to set a private server for call of duty 4 i've looked all over the web but no guide get my server online.i just read that i need to do something with ports etc(i dont even know what that is)

View 3 Replies View Related

Cannot Communicate With DNS Server

Jan 12, 2011

I've been having a problem with my browser lately, Its really slow and it turns out I have 1000 ping average ...the ping does up and down some times its 1 or 2 sometimes 500 . any way I get this msg when I use the diagnose option " Cannot communicate with DNS server(196.40.3.9) .

View 14 Replies View Related

DNS Server In Router?

Dec 1, 2011

Are there any DHCP routers that also host a DNS server which behaves as follows:A request for a host in the LAN is satisfied by dipping into the router's DHCP table A request for a host outside the LAN is passed on to the ISP's DNS server The vendors' documentation and tech support are not clear about this.

View 1 Replies View Related

Web Server Static IP?

Jun 17, 2012

pool of static IP given by ISP, i want to run my web server,whats the best way to configure my web server behind router and assign Static IP for it. i will use static ip for router or web server??

View 5 Replies View Related

DNS Server Isn't Responding

May 29, 2011

I was able to connect this mornin, and suddenly it just didn't work. I checked and it said DNS server isn't responding. tried using the Open DNS 208.67.222.222, 208.67.220.220 But it is still not working and showing the same error.

View 3 Replies View Related

Cannot See Server On Network?

Feb 17, 2011

None of our workstations can see server in network place which is running windows server 2003 standard.Computers are all on same workgroup.I can ping server by IP or name from all workstations and receive response.Server can also ping workstations by IP or name and receive response.F: drive is mapped to all workstations and reconnects at logon.All computers have static IP.We have win 98,2000,XP,7 on network.Following services are started on server:

Computer Browser
DHCP Client
DNS Client
Network Connetions
Network Location Awareness[code].....

View 14 Replies View Related

Two Gateways On One Server

Jun 2, 2012

I have a milestone VMS (video management system) server running on a customers site. The server has two network cards. eth0 has a static IP 10.0.15.250, mask 255.255.255.0, gateway 10.0.15.254 (the gateway is a firewall connected to the internet via an eircom modem in bridged mode) eth1 has a static IP 10.94.238.2, mask 255.255.0.0 gateway all the cameras and related equipment are in the range 10.94.238.1 ~ 20 Customers network users what to view the VMS via an application which needs to run on their PC and connect to the VMS server on 10.94.238.2, The customer has given me a gateway address of 10.94.200.1. However when I use this gateway address in the default gateway of eth1 I loose internet access on the server because the server can not resolve the DNS address. The cusotmers users can see the VMS and the monitoring station can see the VMS via a VPN. However I need internet access otherwise Teamviewer will not work and I can not access the server for configuration and maintenance remotely. Is there some other way I can implant the customers gateway so they have access but I still have internet on the server.

View 2 Replies View Related

Connect To Ftp Server From Outside Of LAN

Jan 19, 2011

I just started an FTP server in a mac server os x 10.6.4.There is no firewall in my ZyXEL router. There is just a security tab under Advance Setup which lets me set up some filter rules. Since I have not marked the ftp rule, the ftp is supposed to be not blocked from the WAN to the LAN.Moreover, I have created an entry in the NAT section of the router which maps the 21 port to the local IP of the mac server os x 10.6.4 which is running the FTP server.Furthermore, the firewall in the mac server os x 10.6.4 is not started (gray color on the corresponding line in the Server admin->settings->Firewall in the left column of the window) so that should not be a problem to get a connection to the FTP server in the mac.

I have connected successfully from a local computer in the same lan to the FTP server. However I am still unable to connect to the FTP server from the outside of the LAN by using the WAN static IP address of the router which gives internet access for the mac. How to be able to connnect to the ftp server from the outside of the LAN?I am using filezilla client to connect to the ftp server from both the inside and the outside of the Lan with the same settings but it just works from the inside so far.

View 6 Replies View Related

XP Pro Not Connecting To Server?

Jul 21, 2012

Still trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. I read the thread on the Plesbit network but not sure I understand his issues. Seems similar to mine though.

View 1 Replies View Related

Cannot Communicate With DSN Server

Jul 16, 2012

Haven't been able to connect to the internet for the whole day,This is what I get when I run ipconfig in the cmd, tried doing the two resets but it won't work!

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersFelicia>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Michelle-PC

[code]....

View 1 Replies View Related

DNS Server Not Responding

Feb 14, 2013

My desktop computer, I am on my netbook posting this, will not get online and the diagnostic tells me the DNS server is not responding

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved