Still trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. I read the thread on the Plesbit network but not sure I understand his issues. Seems similar to mine though.
At our work, we have a shared documents server and also an email server to connect to. For some reason, on one computer only, I cannot connect to either my e-mail or the shared docs. It simply will not accept the credentials (ie my password for my username). It won't accept anyone else credentials either. I have set up fine on another computer, and on my home computer which is on a different network. I can categorically say that it's a computer problem as the usernames/passwords work fine on every other computer, but this one cannot seem to connect. I connect to the servers through a shortcut on the desktop, so i think it's the exchange or something I can't connect to.
i have 2 network, each has its own internet connection. it is on my netcafe, 1st is for browsing and 2nd for online gaming. How do i connect them 2 my pc billing server.
My laptop connects wirelessly via router to RoadRunner/internet and work well.I want to physically (ethernet) connect my laptop (via it's docking station) to a print server and then in turn to a printer."link" light is on, on print server however "pinging" 192.168.0.10 (factory default) fails.
I am currently a student in a computer repair class and have recieved an assignment for troubleshooting a network through a Sprint overdrive device. The current setup in the room (which worked with a previous device but not the same model) is the internet going into the server VIA ethernet port and sent back out through the server into a switch. From there it connects to another switch that connects roughly 10 computers. The overdrive device is a WiFi hotspot device and the director of the network wants me to make the network with the ability of connecting to the internet through the Device. We have placed a Wireless USB device on the server to recieve the signal from the Overdrive device. The server can connect to the internet. When we try to send the signal out from the server we get a IP conflict. I have tried switching the IP's and still do not get it to work.
I have a linksys router WRT54G connected to a modem supplied to me by Time Warner Cable. Just last night, for some reason my internet stopped working. After calling Time Warner Cable internet support, I found out that the modem is working. If I connect my laptop (Dell model which is running on Windows 7) directly via cable to the modem, I can connect to the internet. BUT if i connect my modem to the router, and then connect my laptop via cable or wireless to the router, I can't connect to the internet. When I open up my network window on the computer, I see that my laptop is connected to the router and the router is connected to the internet but I can't connect to the internet. I tried calling linksys customer service and my insurance ran out so yea ... On the laptop, i ran a troubleshooting program and it gave me an error stating that it failed to connect to the DNS server and I should contact the internet provider. Time Warner Cable told me that if connected to the modem directly, I could access the internet indicating that there's an error in the router.
I just moved into my mother house until I find a new house and need to connect my computer. Se has a wireless router. I have a server that was previously connected to a router and a workstation was connected to the router as well. It was all previously connected to the Internet via cables. How can I connect wirelessly? I am assuming I need a adapter to connect to the Internet. Do I connect the adapter to the server or is there an adapter that connects to the router?
We live in a large ranch styled house. Conversely, we installed two broadband connection at opposite ends of the home. One cable and one DSL. Reason: Kids share DSL and Parents have the cable all to themselves. We are currently wanting to setup a media server where both networks would have access to a database of media files. It would be in the middle of the house and each network would connect to it wirelesslyI guess first off, is this possible
pxe server ip address is 10.10.10.20 which is connected to switch port fa0/9 and client is connected to switchport fa0/7.i have only 3 devices altogether. below is running config of switch. wen i boot the client from the server, it display error message as: "proxy dhcp were offered. none dhcp were received. exiting broadcom pxe."
I've been messing around with this for several weeks to no avail. I've never had a problem establishing a VPN connection within my LAN. I've tried several workarounds, learning things in the processs, but to no avail.I've set up a VPN connection with Windows 7. The RRAS server is at home and I'm attempting to access from school (or the internet anywhere).I have no problem establishing the VPN connection (that I can see). Port 1723 is forwarded for both UDP and TCP to a static LAN address (198.162.1.124) in the E4200. PPTP pass-through is enabled (as well as the other two options).I can't see anything on the server after connecting. I'm using a DDNS. It works just fine INSIDE the LAN; I've even mapped a network drive to "S:". Accessing ANYTHING outside of the LAN over a VPN, however, isn't working. [code]
We use the RV082 at some our sites. One particular site will not connect to the DNS server but all others will. I've checked every setting I can think of with no joy.
I managed to setup a 1721 router as a vpn server connecting to it using a cisco vpn client however altough I am obtaining an ip address as defined in the dhcp pool I am unable to communicate with both the remote network and also I have no internet as soon as I connect.
I have several locations with time clocks (a Kronos application) on a small home network with outgoing traffic wide open.I have a server in my office behind an ASA5505 router/firewall, also with outging traffic wide open. I have tried taking the device off of the remote network and giving the it a public, static ip address so it is actually on the internet, yet the server cannot see the device, but it can ping it. I was advised to put the device on the remote private network and set up a virtual server using port 8080 at the remote location. The server is still unable to see the device. I also set up a virtual server for VNC. When I am on my server on my work network behind the ASA5505, I can start my VNC viewer and attach to the device at the remote site using the IP of the router (apparently the device has a build in VNC server).
I have also tried to NAT my server to a public IP, I have set up incoming and outgoing rules on the firewalls at both ends.this should be a fairly straight forward connection.
We have 3 internet links from different providers connected to configured WAN 1,2,3 in RV016. A remote client needs to connect to a internal VPN Server behind RV016, so we use one-to-one NAT to publish the internal server ip to a Valid IP from WAN3 and setup protocol binding in Multi wan to all trafic (TCP and UDP) from the internal VPN address exits with WAN3.
So, the remote client tries to connect to VPN using this ip Address from WAN3 and sometimes work and sometimes not. It's clear to us that the problem lies in the response from RV016 not coming always from WAN3, because if we disconnect the two other links (WAN1 and 2) Its works flawless.
I was just wondering if it's possible with an ASA 5510 to connect to the external IP address of an internal server from inside the network. I have already set up dns doctoring for dns lookups, and everything is working fine there. We have an application inside the network that tries to connect straight to the external Ip of another internal server. where to look in the ASDM 6.4?
I have recently purchased a WAG320N. It is working perfectly, connecting 3 PC's, 2 Xbox 360's and a laptop to the internet and each other.
However as all media files are stored on one PC I was thinking about getting a external USB drive and connecting this to the router and use that as the media server, this would save a PC having to be on all the time.
I use one of the xboxes as a media player as well, streaming movies and music. Will the 360 pick up the media server and be able to stream from there?I can not find anything on the internet as well about the possibilities for this.
I have two AC1200 routers? how do i connect one ac1200 to another ac1200. Only one should act as a DHCP server and broadcast wireless; the other should be simply just a hub (vs. me having to buy a separate hub). What are the correct settings and connections?
I am in the process of migrating our existing server farm subnets to our new Nexus server farm and I discovered something I wasn’t expecting. My intention is to migrate our existing legacy server farm which is comprised of for paired 3750 switches off of our core 6509s and onto the Nexus and connect them to the 2232s via multi gig port-channel connections, two port channels per switch stack.
NOTE this is expected to be a temporary move as next year we intend to install additional N2Ks and move servers over to these directly. But to minimize the outage/downtime it will be better to move the subnets and switchs all at once.
These connections would be grouped 1 gig connections as port channels, one from each switch into one of the two 2232s.
Problem I discovered is Cisco does not intend to have switches connected to the Nexus and it immediately disables the ports when they see BPDUs.
I found a config that does work and it does fail over from one port-channel connection to the other but with the limitation that when the original port channel comes back online it does not fail back over to the original one, an acceptable situation for us. But I am wondering if Cisco would support this design if we did experience issues down the road.
The only issue I really see is to get it to work the config is different on the two N5Ks, see the pert config below for the connections. Both are running the same OS
augs1-ba-ar17# sh ver Cisco Nexus Operating System (NX-OS) Software TAC support: [URL]
I connect to my corporate network using Cisco AnyConnect Secure Mobility Client. Once connected I can no longer print to my LAN attached printer and other local resources. I use the Cisco/Lyncsys E4200 router on my LAN and can re-connect to the storage on the local LAN by setting up Port Forwarding of port 21 and MS Windows FTP folder sharing. However, I can't seem to connect to a Terminal Services client by forwarding port 3389. Is there a way to connect to the local LAN after logging into the VPN connection. I can connect to regular HTTP/HTTPS sites and most other type of connectiins, just not my own local resources.
I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail | (25) | (3000) 194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP Maximum Strength Encryption EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142) Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
