Are there any DHCP routers that also host a DNS server which behaves as follows:A request for a host in the LAN is satisfied by dipping into the router's DHCP table A request for a host outside the LAN is passed on to the ISP's DNS server The vendors' documentation and tech support are not clear about this.
View 1 RepliesI purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies View RelatedFew months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies View RelatedI have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies View RelatedI'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedI put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
interface 1/1
trunk
vlan 1
default-vlan
vlan 555
[code]....
[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedIs there an iTunes Server for WHS 2011 available?
View 3 Replies View RelatedI've been trying to set this up on my own for quite a while now and can't get it to work! I'm wondering if this is even possible...so here's what have:
- verizon fi-os service
- primary router (from verizon) connected to internet via coaxial cable.
- Asus WL-500W router
- 1TB USB external harddrive
I wanted to use the ASUS router as a primary and attach my HDD so I could use it as NAS / FTP server, but I have to use the verizon router because I can only connect to internet via coaxial connection.So basically what I want to do is to take my ASUS router (attached to external HDD) and connect it to my primary router so I can access my HDD on the network. It would be nice to use it as NAS but I also want to try to use it as FTP file server.
I have a small office network with a domain and a server. When I added a router to one of my computers, it is no longer able to access the server (which is not on the router). I'm hoping this is a simple fix.
View 2 Replies View RelatedI am using WiFi using an AP, that AP gives me private IP's (192.168.0.X). I want to install a server (FTP, HTTP game, etc.) and want another person to access to the server's contents or services. That persons is outside of the local LAN, it's possible him to connect to my server using the public IP of the router?
View 4 Replies View RelatedMy father has a small office at home with a server, used to store some files and software he uses and provide a stable network for the house. The network looks something like this:
-Our wall socket line runs to a modem we have from our ISP
-The modem then is connected to our server computer
-Which is in turn connected to a switch
-...where the computers and a router are connected to
This was set up by some computer company. Now for the question: we have used the router connected to the switch to connect wirelessly to the server to receive emails on our mobile phones (email runs via the server too). Also, my father syncs his Outlook diary on his phone this way. Apparently this doesn't work when connected to the modem, I guess because that signal hasn't been processed by the server yet. Now we are unable to connect to the router, presumably because it is quite old and ready for a replacement.
The question is: Can I just replace it with some random router and expect it to work? Or do I need a more specific router/more specific settings in the router to make this work again?
I have a wireless router which provides my internet. In another room is where I have all of my computers. I am setting up a home server with WHS 2011 on it to do backups of 3 computers, file sharing, and hosting some LAN games. So I am buying a wireless router for my computer room that my server will be the WAN (I believe that's how I'd do it, correct me if I'm wrong). I also want to have internet on this router as well to provide a better signal.So I guess what I'm asking is if I plug in my server as the WAN, how would I also get internet to broadcast from the same router? Or is it possible? If not, how do you recommend I set things up.
View 11 Replies View RelatedCan I build a users VPN client in Cisco 877.It's mean that the router can be a VPN server?
View 4 Replies View RelatedAfter getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies View RelatedI've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
I'm trying to run a server for a java application called mekwars. The program needs ports 2347 and 4867 open. I have obtained an ip address from my ISP and registered with dyndns. I can ping my public ip address (my router)I can access my server from any other computer in the LAN. My router is a Zyxel p660hn-T1a. I have configured port forwarding of both ports to my server.I have disabled the firewall in the router and restarted it.My server is running CentOS 6. I have opened the ports in the server iptables, I don't think this is the issue as I can connect from my lan to the server.When I try to connect (from within my lan) to the public ip address of my server the program tells me it cannot find the server. I can't telnet to port 2347 and nmap tells me that the only ports that are open are 22, 23 and 80 ( I believe this are open by default on the router to allow remote management).I can telnet from the lan. My networking isn't great and I'm used to having an "ip passthrough" option on the router to assign to my server. I do have it set as the default router in port-forwarding so I had hoped this would be a similiar option.
Do I have to set a static route in addition to port forwarding or could I have port forwarding configured incorrectly? I'm also considering the router may be at fault and I've emailed my ISP to make sure they're not filtering the ports before they reach my router.
I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
About my internet setup, I receive internet from my ISP via the LAN cable. The IP is static, provided by the ISP. To use the internet, I have to login to their server using a username and password.Earlier, I did not have a router. So, to see if the ISP server was up, I could just ping the IP of the ISP server from my computer using the command prompt, and it would show whether it was up.However, since I got a router, I find that I cannot ping the ISP server from the computer directly as before. To ping the ISP server, I have to open the router administration page using the browser, then use its diagnostics feature to ping the ISP server. It shows only a few pings, and is not like the continuous ping that can be seen when you run ping from the command prompt. So, it's difficult to see the pings, and also diagnose. Also, sometimes the router pages do not open and get stuck, even after being refreshed.Is there any way, or any setting, by which I can ping the ISP server from the command prompt on the computer? Do I have to make changes in firewall settings of computer, or any settings in the router?Why can't I ping the ISP server directly from the computer?I am using Windows 8. The firewall of Windows 8 is on, and the hardware firewall on the router is off.
View 9 Replies View RelatedTrying to set up a minecraft server, I have a dlink DIR-601 router.I followed instructions on the portforward site, and use a portchecker and my ports are correct in practice, but they wont ever show as open.Below is what I have done, virtual server is empty and nothing checked. The ip in the picture is my static IP.
View 8 Replies View RelatedJust recently I got a small block of Static IPs from my ISP with the intent of setting up small personal servers like for mail, cloud storage etc... using a couple of the Arm based Raspberry Pi. i have is i can i run my Pi servers off my router, which is bridged to the main (ISP) router, or would i have to attach them to the main to take advantage of the static IPs/set them up?
View 1 Replies View Relatedi want to stream movies to my nexus 7 in my room only but i dont want to buy a nas. can i connect my external to a router [URL] and use that to stream movies. i dont need to be able to connect to it all over campus but mainly in my room would be nice. i read that w/o root you cant connect to adhoc with the nexus 7?
View 18 Replies View RelatedMy ISP provides me internet connection through password protecting Access Point bearing IP address 192.168.20.1 built with IP filtering which allows only a particular IP 192.168.20.88. I am not able to access internet on more than one computers simultaneously because router allows only single IP and I am not sure what are the WAN IP's uses Access Point provided by ISP eg. IP, Gateway and DNS. My ISP provides me static IP address for home computer as mentioned below :
IP : 192.168.20.88
Gateway : 192.19.20.1
DNS: 192.168.20.1
Alt DNS : 192.168.20.1
My public IP address is 180.87.210.26.
Is there any option to add a router to bride or configure router as proxy server so that i can access internet more than one PC's simultaneously.
i have trouble accessing 192.168.0.254 for setting up my device. it says cannot access server.
View 1 Replies View RelatedHaving router issues that is definitely not the routers fault, and most likely not the modem's. I currently have a DIR-655 in place here but have gone through 4 routers and 2 modems trying to resolve this problem.we were having trouble staying connected to a terminal server and would lose access to its URL which is set up with DynDNS. We switched service providers and all was well for a wile until our wireless started to drop, at the time we had a Netgear VPN and a Netgear Access point, and the network would just drop until the router was rebooted, sometimes 2-3 times a day and it would become a morning ritual to reboot the modem/router first thing.We removed the Netgear AP and turned on the wireless on our VPN and tried that along with a new modem, we replaced both with a Cisco VPN with wireless, we migrated to a software vpn solution and installed the current D-link router and the next day the same thing happened, I then replaced the power strip that was feeding the router and modem and that fixed.
View 3 Replies View RelatedI have a 891 router setup as the local DNS server and external lookups from connected devices (and the router cli) work fine. I'm having problems getting internal host lookups working though.
this is relevent part of the config, router ip address is 192.168.100.9:
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1
[Code]....
If I put rearswitch. (i.e. add a single full stop at the end of the hostname) it resolves fine. The same behaviour happens with other hosts defined with the ip host command. Is it possible to use local hostnames without a domain name or full stop?
We are using a 2821 Router as our boundary router. It has installed into it a 9 port HWIC for layer 2 switching as well as allowing the router to communicate on the Network Management VLAN. All of the devices on the Network Management VLAN are segregated from the managed traffic, which unfortunately also doesn't allow them external NTP services. Can the router be programmed as a NTP server so that all of the network appliances can utilize it for NTP from either it's NM Vlan IP address or from a loopback address?
View 3 Replies View Relatedi have a network setup like the image in the link(url) and am asking how to make the PC's behind the router to reach the mail server??,when i ping the ip of the server i get timeout.
View 1 Replies View Related