Use 2nd Router With USB Port As NAS / FTP Server?
Oct 6, 2011
I've been trying to set this up on my own for quite a while now and can't get it to work! I'm wondering if this is even possible...so here's what have:
- verizon fi-os service
- primary router (from verizon) connected to internet via coaxial cable.
- Asus WL-500W router
- 1TB USB external harddrive
I wanted to use the ASUS router as a primary and attach my HDD so I could use it as NAS / FTP server, but I have to use the verizon router because I can only connect to internet via coaxial connection.So basically what I want to do is to take my ASUS router (attached to external HDD) and connect it to my primary router so I can access my HDD on the network. It would be nice to use it as NAS but I also want to try to use it as FTP file server.
View 1 Replies
ADVERTISEMENT
Nov 21, 2012
I want to use Qos in EA2700. I want to know whether the port in the Qos means the port of local computer or the port of server. Or is it a source port or a destination port?
View 3 Replies
View Related
Jul 24, 2011
I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
View 2 Replies
View Related
Dec 27, 2011
i must translate port 80 from outside connection on port 85 in lan server? how can i configure the asa firewall rules for complete this task?
View 4 Replies
View Related
Mar 19, 2007
I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off
View 3 Replies
View Related
Apr 9, 2012
So, what I essentially want to do is share the device connected to the back of my router so that I can remotely access it over the internet. Much like the manual says you can do.
But I'm having trouble. I've currently got the port set at 38, but the website never loads.
View 1 Replies
View Related
Jan 7, 2013
I recently bought a EA6500 to replace a EA4500 (defective). Prior to the EA4500 I had a 160N which I now use as a WAP for 801.11G devices. I thought the 4500 was good from the media server functions it offered.However since installing the 6500 I noticed:
1. I have port forwarding for http to a web server. It works fine from machines on the outside but from my local subnet 192.168.1.x I can't access the web server (I can't even ping the external address - and yes I turned the anonymous filter off). I am not using ddns and I have a static ip address (cable modem connected) to the outside world.
View 2 Replies
View Related
Feb 4, 2013
So I am trying to forward a port on my linksys E2500 router. I need to forward 198.162.17.3 for a video streaming server. When I go to the admin panel I am only able to change the last digit, ie 198.162.1.x
View 5 Replies
View Related
Oct 21, 2011
[code]...
How do i setup port forwarding in server 2008?? I have heard numerous ways of doing this through windows firewall, NAT and setting up static routes. Not of which i can get working.
View 2 Replies
View Related
Mar 3, 2012
We use microsoft exchange for outlook. I want to know which ports are being used by our exchange server to receive and send emails. Is it possible to check that?
View 1 Replies
View Related
Sep 6, 2011
Im trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.
NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:
admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)
None of these work i even tried typing the name name and password of my router. No luck?
View 7 Replies
View Related
Dec 18, 2012
I've been trying to open ports to start a server on some games that I play.I used a guide that shows you how to set up the server and open up the port, but I can't get it to work.I've tried making an exception in my firewall,but that didn't work, so I tried completely disabling my firewalls. Nothing. I've gone into my router settings and opening a port this way: But it still doesn't open it up. This is what I'm using to check it.In fact, NONE of the ports are open it seems? No matter what port I try to type in on the port checker, it always gives me that same error.
-Both?
-Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersack>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : FellowShip[code]....
Who is your Internet Service Provider (ISP)?
-Comcast
What type of Broadband connection are you using?
-Cable
What is the exact Make and Model of your Modem, Router or Modem/Router Combo?
-Router is WNR2000v3, Modem is SMCD3GNV (One I'm renting from Comcast)
What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer?
-Avast! Antivirus and Default Windows Firewall
View 12 Replies
View Related
Jun 21, 2012
I've been trying to port forward for my minecraft server I'm setting up forever now and it still won't work. I used the minecraft tutorial to make my IP Addresses Static and I've made it so the port is forwarded on my router. I'm using Craftbukkit and hosting the server from my computer, which is not the one connected straight into the modem (If that matters).
View 9 Replies
View Related
Feb 16, 2012
I have a virtual FreeNAS server running from VMPlayer and I want to allow my friends to connect to my media server from their houses, but I don't want to buy a domain. Is there a way to port them to it when they connect to my Public IP? I am willing to use another program if necessary. I have looked at Filezilla, but have the same issue.
View 4 Replies
View Related
Feb 8, 2012
Alright, so I'm trying to set up a Minecraft server without having to use some sort of hosting program, such as LogMeIn Hamachi. I have tried port forwarding both my external IP from "whatismyip.com" and from ipconfig in the CMD WITH the correct Minecraft port, and others still cannot connect. note that I can only connect to my own server when I use the IPv4 address from my CMD. get my server working so that others can connect? (I have been sure to change my "server properties" file's "server-ip" line accordingly.)
View 1 Replies
View Related
May 23, 2011
I'm trying to develop and test a website from my iPad. I have my laptop and iPad on same local network, 192.168.1.xThey can see each other over network and I can access the page:192.168.1.105:80 (my laptops local web server) from both iPad and laptop. However the application server runs on port 8080 and I cannot access this from either device/machine. the router's firewall is playing a role, and I have no software firewall running on laptop that I'm aware of (turned off windows 7 firewall).localhost:8080/myWebSite or 127.0.0.1 also works on port 8080.The only combo that does not work is 192.168.1.105 with port 8080. I need this so the iPad can hit the site so I can test locally while developing.
View 4 Replies
View Related
Jul 2, 2012
I need to forward traffic from an Amazon server to an internal server with a SQL database on it so need to forward TCP 1433 to an internal IP (192.168.252.43) I have created an access rule to allow the amazon IPP through on 1433 but I am unsure how to point the traffic to the SQL server on the LAN.
I expect I will need to create a NAT rule to do this but cannot see how to achieve it.
I have another problem concerning a site to site VPN which establishes OK but does not pass traffic, I will post that question separately.
View 2 Replies
View Related
Apr 30, 2011
recently I had some malware on my Windows XP Professional (version 2002), so I followed a guide at Bleeping Computer [URL] to get rid of it. Problem is, for some reason, after I finished, I could no longer access the internet!When I try, FIrefox gives me their "could not connect" message: "Server not found. Firefox can't find the server at [site]." Check the address for typing errors such as ww.example.com instead of [URL]"When I try to log into MSN, the troubleshoot says I have a problem with my DNS and Key Ports.I'm not good with computers so I Google'd and found some ping-ing instructions. When I tried to ping [site], I get: "Ping request could not find host [site]. check the name and try again." This happens regardless of the site I use.Lastly, I tried "ping 127.0.0.1" from a troubleshooting site. It gives me: "Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
[code]..
View 8 Replies
View Related
Mar 20, 2011
I wonder what the difference is between the virtual server and the port forwarding because the router I was using previously had only port forwarding. When should I use virtual server instead of port forwarding?
View 1 Replies
View Related
Feb 19, 2013
Do I create an SMTP Network Object and send TCP traffic throught NAT?
Or do I go to the ASDM's Configuration/Firewall, choose Public Servers, and choose Private Interface=inside, Public Interface=outside, set the private/public IPs, and choose SMTP as the service? This seems much simpler, but is it the correct way to do it?
I am using ASDM 6.4(5) and would like to use that versus the CLI.
View 4 Replies
View Related
May 24, 2012
I write here to see if some kind soul can not solve my problem (which is common to seeso many people around the world). problem: I have a mail server (192.168.1.17) configured static NAT because it is accessible byPublic IP (PPP.PPP.PPP.PPP). Everything works properly from the outside, but if I get my Mail server (on port 443) from the internal network (192.168.1.xxx) there 'verse. This configuration is called Nat inside-to-inside is done by default by some SOHO routers(such as the TPLINK from 25 euros) but Cisco did not succeed. I search on the internet for 2 days without a get nowhere. PS: I have a Cisco 1801 router. (or 1941 as another router).
View 13 Replies
View Related
Aug 4, 2011
I'm learning as I go and am having some problems with an ACL:
Extended IP access list 120
permit tcp 172.17.0.0 0.0.0.255 host 172.16.1.7 eq 15871
deny ip 172.17.0.0 0.0.0.255 10.0.0.0 0.255.255.255
deny ip 172.17.0.0 0.0.0.255 172.16.0.0 0.15.255.255
deny ip 172.17.0.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip any any
Extended IP access list 130
permit tcp host 172.16.1.192 host 172.17.0.10 eq 4899
permit ip any any
I need to be able to access a server 172.17.0.10 on port 4899 from workstation 172.16.1.192. My ACL's are listed above (obviously!). It's not working as it is. My suspiscion is the deny ip 172.17.0.0 0.0.0.255 172.16.0.0 0.15.255.255 in ACL 120. But that is required as we cant have users from the 172.17 network seeing/accessing the 172.16 network.
View 4 Replies
View Related
Sep 4, 2012
I am trying to connect from the outside to a TCP server inside my lan that is listening on Port 25565. I am using a RV110W. I did the DMZ IP for it.
From the Lan I can establish a connection (even with my dynamic dns address). As I try it from the outside the server log tells me that a connection has been establishen but it shows the gateways IP. Afterwards it tells me the connection hase bin lost (Time out).
As I set Port forwarding I even cannot reach the server from the out side and lan.
I even did set up access rule WAN to Lan.
View 1 Replies
View Related
Feb 21, 2012
I'm new to the Cisco world and have so far got internet and VPN working (without SDM) using the IOS commands.I have hit a stubling block with port forwarding ports 80 (http) and 443 (https) to my small business server for outlook web access.I need to forward port 80 and 442 to internal LAN server 192.168.10.1.The Cisco 877 has a local IP address of 192.168.10.254. [code]
View 6 Replies
View Related
Feb 7, 2013
: Saved
: Written by enable_15 at 03:51:29.049 UTC Mon Feb 4 2013
ASA Version 8.4(4)1
host name cisco asa
enable password xxxxx encrypted
password xxxxx encrypted
names
interface Ethernet0/0
switch port access v lan 100
interface Ethernet0/1
interface Ethernet0/2
[code]...
View 2 Replies
View Related
Jul 18, 2011
I have a setup like this.
Foreach computer I need to go and configure the browser proxy settings and some people are getting smart and turn it to automatic configuration again.
So what i want to achieve is to have my DIR-655 to route all the HTTP/port 80 traffic to the proxy server.
That way it is transparent and then it is not needed to configure each computers browser settings.
I am pretty new to this and the router configurations.
The proxy server works fine if i configure the browser manually.
View 6 Replies
View Related
Sep 18, 2011
Basically the problem that I have is that I have a new Exchange server sitting on 192.168.12.2 IP address and on the router I have this NAT enabled
ip nat inside source static tcp 192.168.12.2 110 212.115.5.5 110 extendable ip nat inside source static tcp 192.168.12.2 25 212.115.5.5 25 extendable
The Exchange can receieve emails but it will not send them. It cannot make connection to any of the smart hosts on port 25 or can't even send mail using DNS. When I run telnet my.smarthost.com 25 it will not connect but if I run that from the router then it connects fine.
View 1 Replies
View Related
Feb 27, 2011
i am trying to forward port: 3754 on my westell A90-750022-07 gateway and i cannot get it to work? i made new rule and and when i try to enable it loads to a page with the menu bar on top but nothing in the body?
View 2 Replies
View Related
Jun 28, 2012
Can this scenario be done one the cisco 877 router? I have VPN Ipsec up and runing on both site. How can to configure the port forwarding to the remote server over the tunnel? url...
View 16 Replies
View Related
Dec 13, 2011
we would like to setup FTP server over CSS where our member sever use non-std-port to open both control/data channel (i.e. 6370 as ctrl and 6369 as data this case.) but seems we only get Passive mode FTP mode work only but not for Active mode FTP case for data channel establishement for server back to client..
# sh ver
Version: sg0820501 (08.20.5.01)
Flash (Locked): 08.10.1.06
Flash (Operational): 08.20.5.01
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
[code]....
View 3 Replies
View Related
Mar 10, 2013
We have ASA5520 and we want to configure a VPN IPSEC profile so that a partner of ours can access only a server and only on HTTP port.I've tried configuring split tunneling with an Extended ACL but probably I'm missing something. I just configured the ACL so that it included any source to our server's IP on HTTP port but when testing, it didn't work.
However, if I configure a Standard ACL on the split tunneling I can access the server and all the services it provides.Do you know if I'm missing anything on the Extended ACL configuration?
Should I configure this any other way?
View 6 Replies
View Related
Dec 20, 2011
I have installed ASA5505 in the network. Port forwarding has been done for one of the server in our LAN. Public users are able to access the server successfully. I am trying to access from inside using the same Public server IP, but unable to access it. Can I have this feature in ASA5505(I think it is loopback configuration). If so, may I know the configuration detail?
View 4 Replies
View Related
Nov 5, 2012
Trying to allow inbound access from any host outside to my LAN server on port 995. [code]
View 1 Replies
View Related
