I owned a dir-600 for 3 months now. for the first 2 months the router has been working perfectly fine. Meaning: my iphone and other devices can connect to wifi with no problem. Just under a month ago, the dir-600 started acting up. I done everything, from resetting router to even calling my dsl provider to check if the problem was with my provider. I also tried connecting my iphone to other wifi and it was able to connect without hassles.
I am not computer-savvy and I've googled everything but nothing seemed to fix the problem. I have attached the traffic statistics of the router. Obviously there is something wrong.
Region : UnitedKingdom Model : TL-MR3220 Hardware Version : V1 Firmware Version : ISP :
I will soon be moving to somewhere without DSL service. I was wondering if it is possible to connect my iphone 4 to the usb of the mr3220 and use the iphone's 3g data allowence?
Model : TL-WR741ND Hardware Version : V1 Firmware Version : ISP : EOLO
give me procedure for connecting WiFi to iPhone.The phone recognizes the router, but will not connect.No numbers, i.e. 192.168.1.1, etc are loaded No DNS loaded?
My laptop's wifi is just working fine with TP Link but I'm unable to connect internet via wifi on my iPhone 3G. My iPhone's wifi just works fine in my office. Is there any solution available?
Just bought a WRT400N and set it up using 5ghz and 2.4ghz bands, and using WPA TKIP for both. Problem is that both my laptop and my iphone occassionally lose connectivity and my iPhone says that my WPA key isn't valid.
I have the WRT400N router and using windows 7 (on this computer). It works perfectly with any computer I use in the house (there's 3). As soon as I open a laptop, its connected. My iPhone (we have 2) and an iTouch, are a different story. They connect, stay connected sometimes for 5 minutes, sometimes 5 hours, then will drop the connection out of nowhere. It doesn't matter how close or far I am from the router. Sometimes I'll get a message that I have an incorrect password (which it's not, which is why it DOES work). Sometimes I don't get a message at all (on the phones I'll just notice its on E/3G). Now, looking through the database I noticed there is a program for the valet routers that lets you add the phones, yet this doesn't apply to mine.
The tech in live chat told me it was the phones. I know its not as I had a wireless modem before this, and I never once lost a signal or had it ask me for an incorrect password.
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
Currently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
[INFO] [date] [router name]: Wireless system with MAC address [iPhone] secured and linked [INFO] [date] [router name]: Wireless system with MAC address [iPhone] associated
What's the reason for this and is there anything I can do to prevent it?
Im having trouble connecting my iPhone wirelessly using my 615 router. The iPhone sees the router, but cannot connect to it using the router password that i have.
I had a DI-524 for years and I had no problem. My girlfriend wanted more range /speed for her netbook, and bought a DIR-655.
Had no problem with the netbook (acer One) and the Wii. But the Iphone 1st gen (cracked, but working good up to now) won't see any Wifi.
What to say. I have to read the F* manual, I know. But Geez. "The high end" said the guy at the store.
I should have search the web a bit more before buying because this subject (iphone connect problem) is a popular topic. [URL] won't change a thing. The Iphone don't see the wifi network.
When I try to connect to dlink on my Iphone there is a padlock symbol on it, and it requires a password , how do I find this password out please. I have a DIR-615 and am tech noob. Also I lost the info that came with the router. Is there any way to find out my password that an can understand?
I just setup 3 webcam DSC-930L for a friends with a router DI-655.
I run the setup for the 3 webcams. If I use my dlink on the local network it work, if I used my dlink from let say at work, it work too. If I used the i pad in WiFi it works.
The problem is when I try to use the i phone or the i pad in 3G mode, sometimes it work but most of the time it doesn't, after about 60sec it says something like check your network settings... When I'm able to see something in my dlink app on the i phone, if I return back to the list after that it doesn't work if I switch camera.
Question is, do I have to forward any port on the router in the virtual server section? I'm assuming no since sometime it work and sometimes no. Do I have to activate the UpnP on the router too?
I plug it in and connect the computer to it and expect it to work. And it has been doing that without any problems until I bought an iPhone and brought it into the house. I thought it was a fluke, but the day I brought the phone in, my computer started intermittently losing it's connection. If I turn the phone off, the connection comes back on. But what seems really odd to me is that if I right click on the wireless network icon it says I am connected and the strength of the signal is excellent. But then it says no internet access.
In have the 942l and the mydlink Lite app on the iPhone. I have recording set up on the camera capturing in .mp4 format. I can view the camera on the phone fine. I can go the menu and select playback. I see the date of my recordings and the time. Each individual file is listed as you can see.
When I select any of these files, I get a black screen.
Do I need to change the rtsp URL? Anyone have this working correctly on the iPhone? If so, can you share your settings?
I recently tried resetting my router (dlink dir-655). I am able to connect using my iphone and my mbp if I did not make use of a secure connection. I tried putting a password on a new ssid. My ipad 2 and 2 other windows laptops are able to connect without any problem. My iphone 4s was having a hard time connecting to the new ssid. It does not connect automatically just in case I turn on and off my wifi connection for the iphone. I have to type in the wpa password whenever I had to go online again. FYI, I tried resetting my iphone several times and I still get the same response. As for my mac, it was far more much worse. Whenever I tried to connect to my router. It usually says connection time out. I tried resetting the router one more time again. I had to put in the old ssid and the old wpa password. My Iphone 4s was abe to connect automatically. My mbp did the same thing also.
i am trying to connect my new Iphone 4 to my wireless connection which is a cisco wap610n. I get a fails to connect error. mine and other laptop can connect using my security key. the Iphone can connect to other wireless connections. my access point connects to a linksys RT31P2 router?
I have some iPhone in my company and they connect to VPN through an ASA (version 8.0.4). The vpn connection use a certificate to validate that the device can connect. All my devices used the ASA IP address to connect, I decide to change that and use a name to connect ( DNS resolution made by the ISP), a generate a new certificate and made a new vpn connection profile. My PC, mac book pro can connect using the new connection, but my iPhone display the message : "Could not validate certificate". I've checked all the configuration and can't find where the difference between my two connection profile.
I set up a DIR-655 router for a friend 4 years ago and it's worked reliably with all of their equipment since. They have wireless printers, iMacs, pc laptops and iPhone 4S's, all connecting without any problems. Recently, they got an iPhone5 and it will not connect to their home wireless automatically, they have to re-enter the password each time. They've tested their iPhone 5 on other networks and they do not have to re-enter the password. Apple and ATT are blaming the router. I do not live near them and I'm going to have to facilitate them remotely. At this point, I believe their router is configured with WPA2, but I can't be sure. Which configuration will work with the iPhone 5, as well as their other, older, devices that have worked for 4 years
Region : Brazil Model : TL-WR470N Hardware version: v2 Firmware version latest (updated yesterday) ISP:
My Iphone doesnt recognize my printer (HP Photosmart D110a) when I try to print something from it by AIRPRINT. After updated my printers and routers firmwares, the problem continues. Ive been read a lot and seems that the problem is caused by a problem with IGMP or Multitasking protocol.... But I dont find these in my routers page even after updated my firmware.
I log onto other wireless networks the first time by inputting their passwords. My iphone then always automatically reconnects wirelessly to them without have to input the password again. The phone can be asleep for a few minutes or I can be gone for a month. The phone always automatically remembers & reconnects to these networks.However, it doesn't work that way with my d-link system @ home. Everytime the phone sleeps and I wake it up, the wireless connection is lost. There is no automatic reconnection. I have to input the password each time in order to re-establish the wireless link. My printer and laptop seem to stay connected. d-link settings I need to change in order to get my iphone to automatically connect all the time?
This causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
How to develop an iPhone based application which can show live streaming from DCS-930L IP camera? how to support various other IP cameras as well in the application?
Region : India Model : TD-W8951ND Hardware Version : V4 ISP : MTNL
I m using TD-W8951ND wifi router with MTNL connection. The LAN connection with PC works just fine but i m not able to connect my iphone or ipad with the router. I have reset the router many times and also retored my iphone but still no luck. Pl tell me what are the settings needed for wifi connections.. Currently i have set the wireless mode to 802.11 b+g+n. Setting it to just 802.11 b sometimes connects with the iphone but never with ipad.
I reset the wap610N,after establishing connection, my iphone see my network domain but does not connect. I heard of dual band setting,how do i go about that. What must i do to establish connection with the iphone.
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
I've a router for my iPhone which I cannot seem to get it working properly. This is an old router i bought 3 years back.I'm able to get my iPhone to find the SSID of my router, get connected, but the speed is really slow... It works flawlessly when I first start up my router, after awhile, its so slow, i need to switch to my 3G.I'm wondering it could be the setting issues. Any appropriate settings like the channels, long/short Preamble, transmission rate, basic rate, 4xs mode?
After being away for a week, I return home to find my laptop unable to connect to the Internet. It seems the router has been reset (as the router name has returned to its original). My laptop can recognise the router, it shows 5 bars signal strength but will not connect. I know the password is correct as my iPhone can connect. I am not too knowledgeable about these thingsI have tried deleting all saved networks and re-booting. I had no problem connecting a week ago.
I am in the process of moving in my new house and the landlord set up a Belkin router and gave us the password. I connected to the wifi with no problems on my iphone, but when I try to connect from my PC is says the security key is invalid. I hooked up directly to the router, went to the IP and tried logging in with the password to no avail. I don't get what the problem is? The password works fine from my phone, but not from the computer.
