Router Configuration For Iphone
Jan 23, 2011
I've a router for my iPhone which I cannot seem to get it working properly. This is an old router i bought 3 years back.I'm able to get my iPhone to find the SSID of my router, get connected, but the speed is really slow... It works flawlessly when I first start up my router, after awhile, its so slow, i need to switch to my 3G.I'm wondering it could be the setting issues. Any appropriate settings like the channels, long/short Preamble, transmission rate, basic rate, 4xs mode?
View 6 Replies
ADVERTISEMENT
Jul 25, 2012
After being away for a week, I return home to find my laptop unable to connect to the Internet. It seems the router has been reset (as the router name has returned to its original). My laptop can recognise the router, it shows 5 bars signal strength but will not connect. I know the password is correct as my iPhone can connect. I am not too knowledgeable about these thingsI have tried deleting all saved networks and re-booting. I had no problem connecting a week ago.
View 17 Replies
View Related
Nov 29, 2011
I am in the process of moving in my new house and the landlord set up a Belkin router and gave us the password. I connected to the wifi with no problems on my iphone, but when I try to connect from my PC is says the security key is invalid. I hooked up directly to the router, went to the IP and tried logging in with the password to no avail. I don't get what the problem is? The password works fine from my phone, but not from the computer.
View 10 Replies
View Related
Mar 25, 2012
I owned a dir-600 for 3 months now. for the first 2 months the router has been working perfectly fine. Meaning: my iphone and other devices can connect to wifi with no problem. Just under a month ago, the dir-600 started acting up. I done everything, from resetting router to even calling my dsl provider to check if the problem was with my provider. I also tried connecting my iphone to other wifi and it was able to connect without hassles.
I am not computer-savvy and I've googled everything but nothing seemed to fix the problem. I have attached the traffic statistics of the router. Obviously there is something wrong.
View 14 Replies
View Related
Nov 8, 2012
My Iphone 4s will no longer connect to my WRT54G Linksys router. I know it's a security issue because if I disable security, then it connects. I'm using WPA-Personal, AES, Mixed mode.I've already tried resetting the network settinegs on the iphone a couple of times.
View 3 Replies
View Related
Jun 16, 2011
I use a tethered iPhone to access the Internet. We live outside of the DSL service area so this is really the only high speed internet connection I have available.Unfortunately the "wireless hotspot" feature of the phone isn't very consistent. I can get all of my computers to connect to my phone this way, but the connection is constantly dropping, and I'm always having to reboot the phone to get the computers to pick it up again. The most reliable way to use the tethering is to just plug the phone in to whichever computer I happen to be using. This does create a problem, though. If I want to print to the network computer or access a file off of one of the other computers I have to manually connect to the wireless router, because that's the only way the computers can talk to each other. In the meantime, though, I can't use the internet because my computer thinks it needs to try to connect to the internet through the wireless router, and when it can't find the internet that way it just tells me there's no connection. Nevermind that my phone is still plugged in, for some reason it doesn't want to use that connection if it can see the router.
View 7 Replies
View Related
Feb 8, 2012
I purchased a new E-2500 router and got it operating my computer, but my iphone will not log on, I set up guests and now it appears to log on, but doesn't.
View 1 Replies
View Related
Jun 20, 2011
I just successfully setup my wireless Netgear router to work with my laptop and desktop. I now want to get my iPhone to connect to it as a WiFi connection. It sees the available network after I enable WiFi, but when it tries to connect, it just says "unable to connect" or something after I input the password.
My current password shows in the Netgear router (through 192.168.1.1) in the "passphrase" field under Wireless Settings, and it's cp6s-n3rb-ziav. This is what I put in the password field for my particular network in the iPhone before it tells me it can't connect.
There is an option on the left column in the router for "Set password," but it's just to change it to something else. If my iPhone won't accept the current one, I don't see why it would accept a new one, and then I'd have to go and change it in the laptop, too. Without knowing if that's the issue, I'm holding off on that for right now.
View 2 Replies
View Related
Nov 6, 2011
How do I connect my Iphone to my ATT router, Gateway 2 WIRE WIFI?
View 1 Replies
View Related
Sep 12, 2011
So currently where i live we dont have internet other than the tethering of our iphones. I bought this router mainly for use as file sharing between 2 computers. The reason i bought the router over a switch is because we are moving in 2 months and will have cable internet.So because of this if i have the router plugged into the computers and i plug my iphone with its USB into the computer to access the internet the router seems to block it. When calling support to find out how to disable the routing to allow the iphone internet through they seem to not know what the heck im talking about.
View 1 Replies
View Related
Jul 13, 2012
I'm using a WRT54GL(4.30.14) Router with a Charter Cable Modem running 5 computers on the network with 1 being wired and the rest are wireless. When my family comes over they can connect with their iPads and laptops but for some reason I can not get this iPhone 4G to connect. We put in the password and it says unable to connect. Are there any special settings that need to be made to the router to let the IPhone connect?
View 3 Replies
View Related
Feb 17, 2011
My laptop connects fine, so I know it is working, but I cannot get my IPhone to connect. I keep getting an error message stating "Incorrect Password" but I know the password entered is correct.
View 9 Replies
View Related
Aug 30, 2012
How can I set up iphone 4 to print using a router model E 3200,to the printer model canon MP520 via USB.
View 2 Replies
View Related
Dec 30, 2012
All networking had been working great until recent power failure. Then laptops failed to connect, found my router WRT54G had become insecure. I open the router using "admin", reset Wireless Security and reset my password. Wireless laptops, wireless camera now works fine but now iPhone will not connect? I have double checked the password, it is the same as the router. Is there something else in the router that needs changing for the iPhone connection?
[code]...
View 3 Replies
View Related
Jul 10, 2012
when i go on my iphone and click on the wirless network i just set up, it does not ask me for a password. instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static) with a list of blanks for ip address, subnet mask, router, dns, etc. below that.
View 1 Replies
View Related
Sep 23, 2012
When I first set up my router, I used the same user name and pw as I had for my old router and my iPhone connect just fine. I decided to use the guest network after one of my sons friends was sitting outside one morning using my network. I told the friend the pw for the guest and changed the pw for my network and created an key on a thumb drive. Now I cannot connect my iphone. When I try to use guest is seems to work ok, but I want to use my network. I chose my network on my iphone and it simply says unable to connect. That is the only info/choice I am given.
View 1 Replies
View Related
Jul 23, 2011
I have an E1000 wireless N router. My husband set up all of the original configuration when we purchased it. I have no problem with my laptop. I want to use my Iphone and Blackberry for wifi use. I find the network on my iphone but it requests IP address, router, etc. information. The Iphone is a 3g.
View 1 Replies
View Related
Mar 15, 2011
I recently purchased an E4200, but I am experiencing slow/inconsistent performance and connection problems with iPhone 3G, 3GS and 4. The iPhones are running the latest firmware 4.3. The E4200 has also been updated to the latest firmware 1.0.01 build 10. I do not experience these problems with various laptops, and I did not experience them with a previous Cisco router WRT610N, nor with a D-link DIR825 in another location. The security is set to WPA2 Personal and all the other settings are the same from the prior router. If I disable the security, I do not experience the connection problems, but still experience the slow performance. If I switch back to the WRT610N, I do not experience any problems. this a E4200 firmware issue yet to be resolved?
View 9 Replies
View Related
Aug 4, 2012
I have an issue with my home network that is really stressing me out now. I have a Thomson TG585 v8 router that my laptop, iPad and iPhone connect to no problem but my iPad/iPhone won't talk to my laptop.. I want to be able to use my iPad to remote in to my laptop to watch movies etc. Network sharing is on the laptop and I've checked that all devices are on the same network..I can't ping the iPad or iPhone from the laptop either.
View 9 Replies
View Related
Feb 11, 2013
I have a iphone that will not retain the password for a WRT54g. Each time I leave the house, I have to renter the wifi password on my phone. It remembers other networks, just not the house.
View 1 Replies
View Related
Mar 22, 2012
i got my ps3 & xbox to connect it was easy but when i go to connect my iphone it doesnt even let me put my password in it just says"cant connect"?
View 3 Replies
View Related
Jan 3, 2012
My BOSS have a iPhone 3GS. He tells me that iPhone wireless connect to his home AP. Why he has to input password everyday whenever he first time wireless connects to WRT54G at office. What should I do for my BOSS to wireless connect to WRT54G without input password everyday? By the way, I set wireless security as WAP2-personal AES.
View 1 Replies
View Related
Jun 26, 2012
I recently connected E1500 to time wanrner cable modem for my home. 3 laptops work fine, but iphone and ipad can not connect to wireless. But iphone and ipad connected to linksys guest automatically.
View 4 Replies
View Related
Nov 18, 2011
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
View 9 Replies
View Related
Apr 24, 2012
When I try to connect new iPhone 4S, it goes to the page for all the info (IP address, etc.) instead of just asking for the password input. I've tried disconnecting router and restarting, plugging iPhone into iMac laptop, etc. (PC is hardwired into server and PC laptop, iMac laptop and former iPhone 3 all connected to wifi w/o difficulty.) Went to site of purchase (12/2011) of Lynksys E2500. They suggested might need to download a driver.how to locate and install updates to driver for E2500 to allow connection to iPhone 4S?
View 2 Replies
View Related
Aug 24, 2011
my iphone will not accept my router password. when i begin entering the p'word in the iphone setup screen the "join" button turns off.
View 2 Replies
View Related
May 23, 2011
I have a WRT54G ver 6 router.My face-time will work everywhere but NOT at home!
View 9 Replies
View Related
Dec 1, 2012
I am having problems with connectivity and my iPhone 5. The Wi-Fi is okay in some parts of my home network, however in others it is abysmmal. When I bring my computer to the places where the iPhone has problems with signal strength/staying connected the computers have full or almost full strength and no problems. I upgraded firmware for the router, spoke with applecare, have reset the router multiple times, and have been trying different channels. I had the phone in with the Apple store where they concluded nothing seems wrong with the hardware. The phone doesn't seem to have problems like this on other wifi networks I have tried. Using a speed test on the iPhone at home in the low connectivity areas results in horrendously poor latency numbers.
View 2 Replies
View Related
Feb 28, 2013
I cannot get my iPhone 5 to access my wireless network (Linksys E4200) since I reset the router. It asks for the password but doesn't accept it. I'm a newbie so be gentle with me! MSZ
View 2 Replies
View Related
Jan 7, 2013
My Iphone 5 will not remember the password for my wrt54g .
View 2 Replies
View Related
Jun 19, 2010
I have a WRT120N that is connected to a cable broadband modem. I have my desktop computer connected via cable to the WRT120 and that works fine. However, I am not able to connect to the WRT120N with the iPhone. I get the message, :Unable to join the network "<network name>".I've searched on the boards, but cannot find anything specific to the WRT120N and iPhone.
View 9 Replies
View Related
Apr 15, 2013
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP :
I will soon be moving to somewhere without DSL service. I was wondering if it is possible to connect my iphone 4 to the usb of the mr3220 and use the iphone's 3g data allowence?
View 1 Replies
View Related
Dec 2, 2011
I have a E4200 fw 1.0.03 my pc, laptop connect to E4200 is OK but have a problem with my iphone 3Gs iPhone 3Gs connect to E4200 at day is OK althought sometime loss packet but at night (after 17:30) iPhone can't connect to E4200, althought I don't config anything.This is my E4200 configure fw: 1.0.03 No set schedule access internet
At Day This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Day Sun, 04 Dec 2011 07:11:00 received REQUEST from 00:26:bb:fb:29:a0 Sun, 04 Dec 2011 07:11:00 sending ACK to 192.168.1.136 get IP very fast ping packets at day (loss some packets):
But at Night everything change althought I don't config anything on e4200This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Night Sat, 03 Dec 2011 22:11:20 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:22 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:27 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:28 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:31 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:31 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:32 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:32 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:34 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:34 sending ACK to 192.168.1.135
Very difficult to get IP from e4200 at night, sometimes getting IP but not on the Internet, sometimes can not get IP and iPhone get message "unable to join the network "ciscoTNTn""ping packets at night (can't ping):
While iPhone is connected to the Draytek Vigor2600VG good no matter day or night.I re-upgrade fw 1.0.03 and restore factory defaults but still not fixed.Is that a bugs ?
View 7 Replies
View Related