Home Network :: Using A Netgear WG602 Wireless Router - PC And Iphone Randomly Losing Connection?
Jun 2, 2011
Currently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
View 1 Replies
ADVERTISEMENT
Jun 26, 2011
I have a brand new E4200 constantly losing internet connection (both wireless and wired). I have a ADSL connection to the internet, last router I had did not have the same issue. I also have a Cisco ASA 5505 for work connected to the ADSL modem and is not experiencing any disconnect issues. All computers connected to the router is losing internet connection, local lan keeps working. The internet connection gets back again after a 10-15 minutes or when resetting / turning off the router.
I have tried the following;
Changed ethernet cables
Disconnected the ASA 5505
Turned off wireless
Upgraded the firmware
Reseted to factory settings
View 9 Replies
View Related
Mar 2, 2013
Region : Latvia
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : A/S Balticom
recently i bought wireless router TL-WR841N and there hasn't been a day or should i say few hours without restarting/turning on-off.I have cable(no modems,etc)Longest time it has ran without restarting was around 20hours.The problem is it RANDOMLY looses connection like this , but it's not the only problem , mostly when i leave computer and go to sleep or other business i leave router turner ON (no else have access to it and no one touches it), when i come back it just does not connect to internet, it shows that everything is fine , but i have no access to internet.This happens to all connected computers.I have dynamic ip I have russian version of windows xp sp3 , but i think everything is pretty understandable here. connection timed out/request timed out
Code:
Microsoft Windows XP [Версия 5.1.2600]
(С) Корпорация Майкрософт, 1985-2001.
C:Documents and SettingsГеоргий>ping -t [URL]
[code].....
FYI the problem is not in my computers(i tried setting up wireless networks from 2 different pc's) and i'm pretty sure it's not ISP's fault too(everything works fine through cable) , because this never happens with other wireless networks, etc.
View 3 Replies
View Related
Aug 9, 2011
I have two routers. One is Netgear WG602 v3 and Netgear WNR2000. WG602 v3 is connected with internet. I want to make a wireless bridge. How?
View 1 Replies
View Related
Nov 27, 2012
I have a problem with my home network (diagram attached below). I sporadically lose connection between my Router and the devices behind the switch. I have replaced the Ethernet cable between the 2 so I don't think the problem's there. It will work for a week or so, then just lose the connection. I then try a combination of rebooting all of the devices on the network and/or unplugging and re-plugging the cable connections and sometimes that works. It's a relatively new router, but can a router be "underpowered" for pushing a signa
View 2 Replies
View Related
Jan 7, 2013
For some odd reason l cannot connect to Router as keeps losing connection. I connect for a few secs then it loses connection. I can use my IPAD fine to connect to router. I have tried to use use both wireless dongle and cable to connect to ADSL router but no luck with both. I have check for spyware etc but nothing found. I get a cross on my network connectivity icon in network connections with control panel. I am using Windows xp xp2 patch , drivers and patches are upto date. Device drivers upto date also Netgear router?
View 3 Replies
View Related
Feb 15, 2011
I have had this problem for ages now. Every thing will be going fine for large periods of time then randomly i will stop being able to access the internet.
I have tried pinging various things such as google.com, when i do i get a range of reposnes from no packets lost, to no repsose atall. the results from the latest google ping;
[code]...
View 9 Replies
View Related
Apr 7, 2011
my dell notebook that has windows 7 starter keeps losing internet connection and saying no connection available but my home computer still has the internet connection. I have a Netgear router and my home service is through comcast.
View 3 Replies
View Related
Feb 23, 2011
can i use a netgear wg602 access point to connect my xbox 360 to my home network.
View 1 Replies
View Related
Oct 27, 2012
I have Sky Fibre Optic Broadband, with a router supplied by Sky, (You can't use any other router, as username/password for internet is already put into router & they will not give you details when you phone them). The router they supply has only four Ethernet ports on. One is used by Sky to give you Fibre Broadband, thus leaving you with three.I have five devices that must use Ethernet, as they do not have wireless.How do I get more Ethernet ports available to use, without losing the Sky router, as Sky will NOT let you use any other router.
View 10 Replies
View Related
Sep 19, 2012
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
View 2 Replies
View Related
Feb 14, 2013
when I try to connect a laptop to the wi fi it won't connect because the connection has changed from home network to public and sometimes unidentified network . I can get it connected by momentarily unplugging the router and rebooting it , then pressing connect button and it will revert to home network and things are ok . It is a netgear DGN1000 and I tried another router same make and model, same problem. I use an ethernet cable on my desktop no problems.there's 3 laptops come in to occasional use and it's happened to them all . My early attempt was microsoft's fix for sticking in public mode . It is windows 7 pro on the laptops , ultimate on desktop?
View 4 Replies
View Related
Aug 25, 2012
I currently have a Netgear dgn2200 n300 wireless router (acts as a modem, you know all in one thing), and I have configured the settings on it so I can have an open nat type/port forwarded for gaming and so on. I have my xbox and the desktop connected to it via ethernet and my ipod and laptop connected wireless.
The problem is that the internet just drops out for a couple of mins every hour or so whether I or whoever is on it or not. I have tried changing the cables and filter for the phone line but nothing has seemed to work. Occasionally when the internet drops out it doesn't come back on so I have to unplug the router and so on to get it to work.
It's just starting to get annoying getting disconnected so often especially when the router cost like $200 and is supposed to be good for gaming and stuff, and I can't seem to find out why or isolate the problem. My internet download speed is fairly quick (I can get 1.5mb/s say when downloading a movie/hd youtube) and I get 70 GB a month.
View 5 Replies
View Related
Apr 8, 2012
We operate a home office network (workgroup) of 6 older PCs running Windows XP SP3.It's a Windows based network using a designated "home" PC as a server, and until recently we were using ethernet cables and a hub/switch for sharing files which worked well because we only share small document files, no music or video.The workgroup does not have a shared internet connection, we don't want or need one for what we do, although the individual PC's can connect to the web using USB dongles just for checking e-mail.Recently the ethernet hub died and I decided to take the opportunity to upgrade to wireless file sharing.None of the PCs have inbuilt wireless adapters so I bought a D-Link USB wireless adapter for each PC.I also bought a Netgear N300 router, thinking that this was suitable entry level equipment for wireless file sharing. Now I'm not so sure.So far I was unable to install the router on the "home" PC because the installation CD seems to assume that the router will be used for sharing an internet connection and does not seem to offer an installation option without a standalone modem. How to install this type of router to create a closed home wireless network without a shared internet connection.
View 14 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
Jul 9, 2012
I have a Netgear DGN2200 router/modem and have been having this problem for a while now. Every so often the internet will cut out for roughly 30-60 seconds. There doesn't seem to be any pattern to the connection losses and they can happen at any time in the day (overall it seems to occur every hour and a half, although it can vary). When the internet connection is lost, the little "!" triangle appears at the bottom right. I still have wireless access to the router itself. It also occurs on both my wired computer and the wireless computer. On the Netgear itself, the internet light will either flash rapidly green, or sometimes turn red for a short while. The Netgear is plugged via a splitter into the telephone socket. the old neatgear we had did the exact same thing before it finally died and no longer worked at all. Hence why we replaced it with this one. I also rang AOL about the problem, who said that there may be a problem with the line and that we should ring BT about it. We had the line checked and apparently the line was fine and was not the cause of the problem. Things I have tried include changing the router channel and I have tried changing the splitter in case that was faulty. Do you think it could be a DSL problem on AOL's end? It's possible that the drops coincided with a free upgrade they gave us for faster internet, although time-wise I'm not entirely sure.
View 6 Replies
View Related
Feb 19, 2011
we have been having problems with our wireless internet connection for a while now and have even changed provider without success.
What happens is that all our computers lose the internet connection from one moment to the next while the signal strength remains unchanged. when you try to sign back into the home network it is basically impossible. When rebooting the BT router it works, sometimes for a few moments only sometimes it lasts.I am wondering if the reason is that the computers are losing their ip address or has it something to do with the security key?
View 1 Replies
View Related
Oct 17, 2011
Every time I connect to my home network with iPhone 4 my whole network stops working. Windows 7 is not reporting any problems with connection, nor is my router. I have cable connection with my PC and wireless with my laptop, they both just stop working without any visible reason. Even the iphone i connect with wont work, but of course it says its connected and everything is ok.I tought it was an iOS 5 problem, so I reinstalled it. It worked for an hour then its all back again. I even tried sharing my PC conection so that my iPhone is connected to PC and not directly to router.But that produced the same results.
View 6 Replies
View Related
Apr 4, 2011
I have a DIR-625 router that has been acting odd lately. Several times a day at random my devices (laptop, android phones, PS3) will lose internet connectivity from my wireless network. They say they are still connected to the network but I am unable to access the internet or even the router config page. Everything works fine on Wired LAN computers. The only way I can fix it is by unplugging the router for a few seconds. I have had the router for over a year now without this problem. Seems like it may have started when we got our android phones.
View 6 Replies
View Related
Sep 20, 2011
Wireless clients drop off Netgear router - Running a Netgear router in home. Have one desktop PC, 2 printers, 1 Mac and 3 Windows laptop connected. The devices that connect wirelessly will drop of the router in a random way. One printer, an HP all in one, will no longer function and I have to pull the plug to de-energize and restart it. My wireless network is a mess. I have called Netgear and for the first two months they had me change channels and adjust other settings which seemed to work at first but then these symptoms all came back.
View 1 Replies
View Related
Apr 7, 2011
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies
View Related
Nov 15, 2012
I have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".
IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.
Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".
View 14 Replies
View Related
Oct 22, 2011
I am using a Netgear Rangemax Wpn824 with comcast cable internet. This problem happened also on an older router but less frequent with this one.
I don't know if this is a common problem but I cannot seem to find it on the web and thought I would ask here. The problem seems to only happen after someone restarts their computer.
What happens is 9/10 times on startup the internet will connect just fine but the 10% of the time it will say "Unable to connect to Shaun" (my wireless router) Sometimes if we restart the computer it will fix itself but usually we have to reset the router and it will fix itself and wont happen again for another couple of weeks.
I called comcast about it and their tech support said it was a router issue, that's when I put in my newer one (the rangemax) and its still happening. We even upgraded the comcast modem recently too, and since it fixes itself when I reset the router I don't doubt its the router.
I can't seem to update the firmware on it, not sure if that will work. (It says not enough memory to complete) Should I buy a new router?
View 9 Replies
View Related
Mar 26, 2012
I am working on a business network that was setup by another tech. Basically the connection comes from the modem to a 16 port switch (13 being used), and is going to each computer.. I'm thinking of tossing a router between the modem and switch to see if this works. Basically what it is doing is each computer accesses a database on the server, and occasionally they are losing connection to the database.. I did change all of the stations to static IP as they were all dynamic.
View 3 Replies
View Related
Sep 2, 2012
it shows that it is Online getting an Excellent Connection thru my Home Network... I go Online using Firefox with it at home.. stays up for a few minutes .. can get onto the internet...then loses the ability to stay connected.... it still states it's Connected though ... kind of baffling... like something is timing out then blocking it...I tried shutting down my AVG Anti-Virus.. also shut down Windows Firewall... it still continues to lose the Connection while stating it's connected getting a good signal... both of these are configured correctly as far as I can seeI've re-installed my Wireless driver thru the Acer Recovery Management included on the Netbook.. still no good..
View 2 Replies
View Related
Aug 16, 2011
I have a crappy router/modem from comcast with two windows machines and a linux web server connected. I also have another router, a Linksys WRT54G with DDWRT firmware with WAN connected to the modem/router. The linux web server has a static IP, configured with /etc/network/interfaces The network goes down randomly. Disconnecting and rebooting the linux web server usually fixes it. It's possible that the WRT54G could be at fault as well.The problem is that I just don't have any information on what is happening on the network. (Well even if I had the information, I'm not sure I would know what to do with it) I installed wireshark, I figure I should just leave it running until the network goes down, then I can go through the packets and see if I see anything weird?
View 4 Replies
View Related
May 12, 2012
I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.
View 3 Replies
View Related
Jan 31, 2012
My use case is very simple I want to connect iPhone/iPad using pptp to my home network. I purchased the 180W and looks like I am not able to connect mobile devices to it. My Setup is simple I have ST536v6 (firmware 7.4.4) modem in bridge mode and Cisco RV 180W connect to my ISP using Ppoe. I followed the Admin guide and created the pptp user. If I connect from internal network it connects but when I try to connect the device from WAN it just does not work.
Cisco RV 180W
Firmware Version:1.0.1.9
View 7 Replies
View Related
Dec 26, 2011
i have a wireless adapter connected to a different wireless network. now the issues is i have my own router which i want use for my ps3 and phone to access my files from my pc but every time i connect my router, it switches from my wireless to LAN by default hence no internet connection.i want to be able to use my wireless connection for internet
View 1 Replies
View Related
Jun 20, 2011
I just successfully setup my wireless Netgear router to work with my laptop and desktop. I now want to get my iPhone to connect to it as a WiFi connection. It sees the available network after I enable WiFi, but when it tries to connect, it just says "unable to connect" or something after I input the password.
My current password shows in the Netgear router (through 192.168.1.1) in the "passphrase" field under Wireless Settings, and it's cp6s-n3rb-ziav. This is what I put in the password field for my particular network in the iPhone before it tells me it can't connect.
There is an option on the left column in the router for "Set password," but it's just to change it to something else. If my iPhone won't accept the current one, I don't see why it would accept a new one, and then I'd have to go and change it in the laptop, too. Without knowing if that's the issue, I'm holding off on that for right now.
View 2 Replies
View Related
Feb 15, 2012
I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies
View Related
Apr 13, 2013
I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
View 2 Replies
View Related
Jul 6, 2011
I Got a new ADSL connection,They provided a ADSL Modem. To connect tot he ADSl i have to enter the username/password in the PC....in this case how can i make this ADSL connection to wireless? coz Me and my friend want to use the same connection.
View 1 Replies
View Related
