i have a wireless adapter connected to a different wireless network. now the issues is i have my own router which i want use for my ps3 and phone to access my files from my pc but every time i connect my router, it switches from my wireless to LAN by default hence no internet connection.i want to be able to use my wireless connection for internet
View 1 Replies
I Got a new ADSL connection,They provided a ADSL Modem. To connect tot he ADSl i have to enter the username/password in the PC....in this case how can i make this ADSL connection to wireless? coz Me and my friend want to use the same connection.
View 1 Replies View Relatedi want to set up a vpn connection to my home network. i see that the e2000 supports ipsec, but does not provide a client. what client can i use to establish a connection?
View 4 Replies View RelatedOften my router drops connection to all my devices. Multiple times a day. It's only for a minute or so, but it's annoying. I'm using a Linksys Wireless-N router (WRT160N) with WEP encryption. I'm running two Windows 7 laptops, LG BluRay player, Apple TV, Xbox 360 (Wired) iPhone 4, and a iPad 2. It doesn't matter if I'm browsing the web, watching Netflix, or playing a game, the connection gets lost. As we speak it happened again. I have no clue on what to do. I've reconfigured it multiple times. Firmware has been updated months ago.
View 6 Replies View RelatedI have a home network with a Linksys E4200 connected to the ISP's fiber box. The problem is that when I'm connected to the Linksys, either wired or wireless, the connection to the internet will drop after what seems to be a random amount of time (normally anywhere from 2-10 minutes). I can restore the connection by doing any of these things:-reboot Linksys-disconnect and reconnect cable from router to fiber box-if on wireless connection, make changes to the router wifi settings, like change the wifi channel.The internal network stays up, and I can ping both the internal and external ip of the router, but not the fiber box. I have also had the same behavior with an Edimax Wifi AP and less frequently with a Edimax router (once every 1-2 days). I have done everything I can think of:-changed the wifi channels-changed the ip ranges, subnets, turned router DHCP off and back on-booted the fiber box-changed cables-updated all routers to the latest firmware, the network cards with latest drivers...and loads other things that I don't remember right now. For the wifi side of things, there are no other networks in range that could interfere. The same problem occurs on both my and wife's Win 7 laptops and on the iMac (latest OSX). Here's a fun detail: while the Linksys has lost its connection to the internet, I can still access the internet through the old Edimax router connected to the same fiber box, either wired or wireless.
View 1 Replies View RelatedCurrently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
View 1 Replies View RelatedI am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies View RelatedI have a sky router (Netgear DG834GT), which i have connected a secound router to which is a D link DIR-615 (with DD wrt firmware D4).I can get access to the sky router remotely without any issues even when changing the port number. its the Dlink router i cannot get access to remotely (within the network i can by typing in the dlink's ip address and works). Main router Sky router IP is 192.168.0.1 - Currently the port number is 8081.Secondary router Dlink IP is 192.168.0.2 (Static ip) - currently the port number is 8080.I have tried to configure the ports but it just dont want to open. Ive tried to open the ports on main netgear and tried all the option my dlink for port forwarding. i must be missing something fundametal here.
View 2 Replies View RelatedLately I've been experiencing connection problems between my router and cable modem. Every night after 11:00 PM EST, my Internet connection sporadically goes out. I called my ISP who said there was nothing wrong on their end. Plugging directly into my modem allows me to access the Internet. When I wake up in the morning, the connection is back until 11 or later again. I ran WireShark but I'm not sure what to be looking for. There are a lot of random things from the LLMNR protocol like standard query A zmtvrjaql.
View 2 Replies View RelatedIs it possible to connect two distant sites e.g. 30 miles wirelessly? Will there be any issues with Line of sight and interference? Will it be a better solution compared to that of wired counterpart?
View 3 Replies View RelatedI have a PC that connects to a wireless connection. I would like to share this connection with MORE THAN ONE PC. I have read it is possible to share it with ONE other PC via a crossover cable.I would like to share this to a router so that the PCs connected to the router can use this connection. Is this possible?If so, what would I need?(Other than a crossover cable and router)Side note: I'll be sharing this connection to a wireless router - so I'm hoping to basically relay the connection that way.I know it is possible to buy extenders that extend the range of wireless connections, but this is where the restrictions come into play...-We are not able to network these computers on the wireless network, as we do not manage it and have some quite strict privileges.-The router will also be used to share a hard drive via USB.
View 2 Replies View RelatedI'm sure this may appear to have been asked before but I've scoured the Internet and can't find anything exactly applicable to the setup I'm trying to achieve. I had a sky ADSL connection in my living room that had my tv, ps3, NAS and netbook wired in. I've since changed to a sky fibre connection but this had to be installed in the master phone line which is upstairs. This obviously isn't a problem for all of the wireless devices around the house including the netbook and ps3 in the living room. The NAS and TV are still wired to the old router so can see each other with no problems. Any pc trying to connect to the NAS can just switch to the old router via wifi if desired. The only problem I have is that the TV can no longer access the Internet.
I initially tried to use ICS on the netbook (it's left on permanently) - it's wired to the old router and wirelessly connected to the new one. This appeared to be working for a while but is no longer playing ball. I've tried bridging the connections and the tv and NAS both had Internet access but it's very sporadic.Is this a reasonable setup or should I be looking for another solution? I can specify a manual ip, subnet and default gateway on the tv if necessary - I was going to point it towards the bridge's gateway but I don't know about IP?
I need to get the internet from my uncle and aunt's house to my grandma's house next door. I don't know exact feet or anything like that yet but I will get it measured off. My grandma's kids got her a laptop for Christmas but she doesn't have the internet or would be wanting to spend money on it a month since she already says she will not be able to use the computer, but I said we would just somehow get the internet from next door. I don't know off the top of my head but my aunts computer is an older Dell, early P4 computer with xp on it. It's slow but it does work so that is the computer. The router is some sort of D-link with one antenna on it and I'm pretty sure it's probably a G-router(2.4ghz) and not a N-router, but can get that info later too! They currently use Time Warner Cable Roadrunner Turbo for their internet. Both places are well built brick houses and at least 200-300 feet apart. I checked yesterday and the computer was able to pick up the signal in my grandma's house on the end that was closest to my aunts house. It was showing 2 bars but it wasn't extremely fast and that room had a bigger window in it probably allowing some of the signal in? If you moved from that point of the house though and tried to go to the other end, the signal was lost. The router in my aunt's house is one room away from the end of the house that is closest to my grandma's so it could be moved closer but I don't think that will fix the signal enough to do what I need it to do.
View 8 Replies View RelatedWe have been having a very abnormal speed issue. This one has me stumped. I am fed up and thinking maybe its an Att issue that will NEVER be resolved.Brother comes and bothers me Zach internet is slow thinking hes just being picky I tell him to reboot his computer. He says its still slow. I run a speed test from my desktop computer I get a 5.36Mbps download and .63 up. I go to his windows xp professional laptop and run a speed test he pulls .63mbps down and .32 up. This is a Dell Latitude D610 with built in wifi. My desktop just so happens to be a wired connectionI grab my laptop which happens to be the exact same model and experience the same result. So I power cycle to modem, then the Linksys ea2700 router. The speeds go back to 5.37m down and normal speed up. Then after 20 minutes its back to a CRAWL.
OK the router MUST be dead. I will kill two birds with one stone. I plug in my Modem/Router combo 2wire 2700. Speed does the same thing starts off fast then slow to a crawl. Figuring it's a laptop issue I use a Linksys wireless USB adapter AE-2500. I get the same result fast then slow. NOW the crazy thing is that its only on my wireless connections. The wireless computers use wireless G and say 54mbps so why would the internet be slow only on the wireless connection.So maybe it's an interference issue So I start up the generator and plug my modem router and laptop into it. I then shut off THE ENTIRE POWER service to my house! I get the same result fast then slow. My neighbors are far apart and I have switched wireless channels and even used the 5ghz frequency with the same results.An ATT Tech says the line is fine. They came to the house and tested everything. The only thing that has happened recently was a storm which left flooding in some parts of town. Only one time was I able to test my WIRED computer and get a download speed of .04Mbps down and .32 up
Trying to establish a wireless connection from WD TV Live Plus unit to Westell 327W router using an AirLink 150 adapter. The media player sees my network and seems to have a good signal, but keeps telling me "limited or no connectivity." The media player (with adapter) is about 20 feet from the router with direct line-of-sight.Also, 3 other Wi-Fi devices having no problem connecting anywhere in the house.Power down/power up, move adapter to alternate USB port, re-try connection multiple times.
View 4 Replies View RelatedI have a problem with my home network (diagram attached below). I sporadically lose connection between my Router and the devices behind the switch. I have replaced the Ethernet cable between the 2 so I don't think the problem's there. It will work for a week or so, then just lose the connection. I then try a combination of rebooting all of the devices on the network and/or unplugging and re-plugging the cable connections and sometimes that works. It's a relatively new router, but can a router be "underpowered" for pushing a signa
View 2 Replies View RelatedThere is a device which is connected to the PC via Lan. I have an exe file which is supposed to get connected to that device and perform some operations. However, the problem is, the exe file tries to connect to the local host ip address 127.0.0.1 and i cant change the ip since it's been coded.So, I'm wondering if i can use the device connection (which already has a different ip like 169....) as a local host connection. So whenever it tries to connect to the loopback 127... it automatically connects to the external device.
View 2 Replies View RelatedHow to install a wireless network in home environment?
View 6 Replies View RelatedNewbie network admin here and I'm having problem dealing with my LAN. I have two networks 192.x.x.x and 10.x.x.x, Configured at my Astaro 220 UTM, which obviously where the gateway is, from my UTM I have 3 isp connected which is the source for my internet. Now from astaro to my core there are two connection, 1 for the 192 network and the other is for the 10 network and from the core there goes my LAN where switches are cascaded.My problem is i'm having slow connection accessing from 10.x.x.x to 192.x.x.x network vice versa. what are the possible solutions is applicable, or the things I should check. plus I can't access(configure) my switches which is on the 192 network from 10.x.x.x. network through web.
View 1 Replies View RelatedHow to set up my router just for my home connection.Already did some basic stuff to it but i just want to add more security to avoid unwanted user trying to hog my internet connection......
ISP: Globe Broadband (HUAWEI router)
Wireless router: TP-LINK WR340G
I really want to learn about this stuff and btw everytime i turn on my Routers Firewall (TP-LINK) i lose connection its like blocking the Globe's internet connection to me.
Is there any reason to apply qos to a 1.5 mbps connection. i had comcast with a 15 mbps connection and qos was good for when downloading large files and gaming and all that at the same time. but i have moved and i only can get dsl at 1.5 mbps.
View 10 Replies View RelatedI have connected my Vista laptop to my old XP laptop using a network cable so that I can share files, printers, etc freely.I have forgotten the correct proceedure for doing this, although the two computers eventually, after a long time link up and I am able to share files. I have done nothing else. I have not entered numbers or anything. The number spaces are blank.I do not understand why it is working at all, but how do I speed up the connection?
View 14 Replies View RelatedI have a Linksys e3200 which was working great until about a week ago. Now any device that connects via DHCP does not have access to the internet, though devices set up with a static IP outside the DHCP range still have full access.The devices connecting via DHCP still have full network access, just not internet access.I tried most of the obvious fixes (reboot, changing the range and lease time for the DHCP) but have at best received a temporary fix.
View 1 Replies View RelatedI have a Linksys/Cisco wireless router. For the purposes of a high def throughput, I have a wired connection from the router to a Windows Media Center appliance in a separate room.However, now I have a second media appliance (Roku device) that I want to run in a wired fashion as well. Here is the thing, I don't want to run a second Ethernet line from the router to new roku device. Is there some way I can share the existing ethernet line between the roku device and the media center appliance? Ideally, since the two devices would never be used at the same time, I was hoping some other network device (another router?) could be hooked up to split the line between the devices. Worst case, is there some simple splitter I can use? Obviously I am trying to avoid the worst case scenario: switching the ethernet connection manually between the two devices every time I want to go from one to the other.
View 6 Replies View RelatedRecently added a NookColor to my toys. Works fine except at home. The device shakes hands with the router but won't connect. Nook connects seamlessly with every other network I've tried. Had my Bro-in-law over with his Anfroid based mobile devices and they won't connect either. We currently are running 4 boxes (2 @ desktop and laptop) off this router with no problems.As near as I can figure the latest firmware update (2007) can't handle the Android OS protocol and while they recognize each other they won't speak or play nice.Any options y'all know of short of replacing the router with a shiny new one ?
View 5 Replies View RelatedI have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
View 8 Replies View RelatedI started having this stupid problem after i built my first computer, in my old computer it was all fine, am using an ethernet cable between my pc and laptop, it is crossed or whatever its called, when i plug it in it gievs me an error, limited connection or no connectivity which pisses me off, i have all the drivers installed everything is up to date.. sometimes it connects, but after 10 mins it disconnects again, and sometimes it works fine until i reboot my pc..
View 17 Replies View Relatedi have triple storey house. in all three floors a broadband connection point (rj45 jack) is there. i have connected one wireless router in 3rd floor. but the signals are not coming on second floor. can i connect netgear wireless access point with one ethernet point in the 2nd floor broadband connection jack (Rj 45), to access wirelessly my internet?
View 1 Replies View RelatedI have three laptops (running ubuntu with different kernel versions) with wireless adapter Intel Corporation PRO/Wireless 3945 ABG. Laptop A ----- Laptop B ----- Laptop CI created an adhoc connection in laptop A with: Essid: 'ad_hoc', IP address: 10.42.43.1, Subnet: 255.255.255.0, Gateway: 0.0.0.0, Now the laptops B and C can see the wireless connection 'ad_hoc' and I can connect to them after setting IP 10.42.43.1 and 10.42.43.2 respectively. So, I created the adhoc connection between 3 laptops. Now, I wanted to check the bandwidth between the different paths. The tool iperf was what I used for TCP bandwidth calculation. The bandwidth between A and B was around 4.5 Mbps , between A and C was around 4.0 Mbps but the bandwidth between B and C (B being server) was 677 kbps whereas C being server was 3.99. I don't understand how can the bandwidth drop so high when B was made the server. The system adapters are identical.
View 1 Replies View RelatedFor my office i want to share my internet connection using proxy and i also want to restrict the websites.
View 4 Replies View RelatedI live in an apartment and I am forced to only use the apartment's internet service to go online. There are two ways to access the apartments network; via ethernet port or wifi. Once im connected and try to browse, I will first be taken an http login page to enter my username and password. The problem with this is I can only use the username and password for one computer at a time. Trying to get my second laptop to access the web using the same user and password will give me an error saying it is currently being used. As I have two laptops (work and personal), I would like to share the internet connection using a device that will allow either or both machines to connect simutaneously. What device will I need?
View 8 Replies View RelatedI have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with few other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. It seems to be only on the machines that are on XP that this problem occurs. The error message is something like \PCNAME is not accessible...
The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
