Home Network :: DHCP Connection But No Internet?
Aug 23, 2012
I have a Linksys e3200 which was working great until about a week ago. Now any device that connects via DHCP does not have access to the internet, though devices set up with a static IP outside the DHCP range still have full access.The devices connecting via DHCP still have full network access, just not internet access.I tried most of the obvious fixes (reboot, changing the range and lease time for the DHCP) but have at best received a temporary fix.
View 1 Replies
ADVERTISEMENT
Oct 3, 2011
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies
View Related
Jun 23, 2011
For my office i want to share my internet connection using proxy and i also want to restrict the websites.
View 4 Replies
View Related
May 29, 2011
I live in an apartment and I am forced to only use the apartment's internet service to go online. There are two ways to access the apartments network; via ethernet port or wifi. Once im connected and try to browse, I will first be taken an http login page to enter my username and password. The problem with this is I can only use the username and password for one computer at a time. Trying to get my second laptop to access the web using the same user and password will give me an error saying it is currently being used. As I have two laptops (work and personal), I would like to share the internet connection using a device that will allow either or both machines to connect simutaneously. What device will I need?
View 8 Replies
View Related
Apr 27, 2013
We have been having a very abnormal speed issue. This one has me stumped. I am fed up and thinking maybe its an Att issue that will NEVER be resolved.Brother comes and bothers me Zach internet is slow thinking hes just being picky I tell him to reboot his computer. He says its still slow. I run a speed test from my desktop computer I get a 5.36Mbps download and .63 up. I go to his windows xp professional laptop and run a speed test he pulls .63mbps down and .32 up. This is a Dell Latitude D610 with built in wifi. My desktop just so happens to be a wired connectionI grab my laptop which happens to be the exact same model and experience the same result. So I power cycle to modem, then the Linksys ea2700 router. The speeds go back to 5.37m down and normal speed up. Then after 20 minutes its back to a CRAWL.
OK the router MUST be dead. I will kill two birds with one stone. I plug in my Modem/Router combo 2wire 2700. Speed does the same thing starts off fast then slow to a crawl. Figuring it's a laptop issue I use a Linksys wireless USB adapter AE-2500. I get the same result fast then slow. NOW the crazy thing is that its only on my wireless connections. The wireless computers use wireless G and say 54mbps so why would the internet be slow only on the wireless connection.So maybe it's an interference issue So I start up the generator and plug my modem router and laptop into it. I then shut off THE ENTIRE POWER service to my house! I get the same result fast then slow. My neighbors are far apart and I have switched wireless channels and even used the 5ghz frequency with the same results.An ATT Tech says the line is fine. They came to the house and tested everything. The only thing that has happened recently was a storm which left flooding in some parts of town. Only one time was I able to test my WIRED computer and get a download speed of .04Mbps down and .32 up
View 2 Replies
View Related
May 26, 2012
So i just brought my computer home from my dorm where it was working fine. as it is in my rom now I bought the XAVB1004 from netgear to connect it from my room t the router in the computer room. That device works great as I have tried my laptop with it and it works. I can connect to the internet as i have set u my router on my computer( the one that i took from my dorm) but only google loads, i can also search in google, and youtube loads where i can oddly watch videos no problem. I have tried reinstalling my ethernet drivers, winsock reset, checking/unchecking just about every setting in internet options and so on. No browser seems to work and I am out of ideas. I turned firewall off as well to no prevail. I have no clue where to look next as 3 days ago my computer worked fine and all I did now was move it.
View 7 Replies
View Related
Jan 21, 2012
recently I've connected to my OpenVPN and everything works fine on my PC I'm getting okay speeds and the VPN IP appears on [URL]The problem is I wanna use internet connection sharing to play Xbox Live while connected through my VPN and I'm having issues.My Xbox isn't even recognizing my wired connection.This is the setup:Wireless Connection > Desktop > OpenVPN > Wired connection from desktop to XboxWhat I think I'm doing wrong is not specifying the correct home networking connection for my LAN 3 (Tap-Win32 Adapter OAS)I tried sharing the LAN 3 connection and set the home networking connection to my Wireless and it disconnects me from my wireless network.
View 1 Replies
View Related
Aug 23, 2012
I have been having problems with my Internet the past couple weeks. If I am watching a video, it doesn't matter which site, the video will stop and start from the beginning or the video will just stop altogether and I have to refresh the page. Another problem that happens while browsing, it will take about a minute for a page to load. The computer I am using is wired right into the router.
The rest of the family's computers the apple tv and the roku are wireless. I have been hearing complaints from them and have witnessed the laggyness. While streaming videos on the roku or apple tv, the video will stop and say video is not available or no connection. This is what I get from ipconfig/all
Microsoft Windows [Version 6.2.8400]
(c) 2012 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Matt-PC[code]......
View 3 Replies
View Related
Apr 2, 2012
I have a home network with a Linksys E4200 connected to the ISP's fiber box. The problem is that when I'm connected to the Linksys, either wired or wireless, the connection to the internet will drop after what seems to be a random amount of time (normally anywhere from 2-10 minutes). I can restore the connection by doing any of these things:-reboot Linksys-disconnect and reconnect cable from router to fiber box-if on wireless connection, make changes to the router wifi settings, like change the wifi channel.The internal network stays up, and I can ping both the internal and external ip of the router, but not the fiber box. I have also had the same behavior with an Edimax Wifi AP and less frequently with a Edimax router (once every 1-2 days). I have done everything I can think of:-changed the wifi channels-changed the ip ranges, subnets, turned router DHCP off and back on-booted the fiber box-changed cables-updated all routers to the latest firmware, the network cards with latest drivers...and loads other things that I don't remember right now. For the wifi side of things, there are no other networks in range that could interfere. The same problem occurs on both my and wife's Win 7 laptops and on the iMac (latest OSX). Here's a fun detail: while the Linksys has lost its connection to the internet, I can still access the internet through the old Edimax router connected to the same fiber box, either wired or wireless.
View 1 Replies
View Related
Mar 10, 2013
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
View 1 Replies
View Related
May 28, 2012
For numerous reasons, I want to bind my DHCP clients to static IP addresses, but can't figure out how to do it in DD-WRT.
I've googled, but every link I click times out (for this specific search- my uplink is otherwise fine).
I know I can do it with hardcoded IPs, I'm just curious how static DHCP is done (and yes I am aware that Static is a contradiction in terms of DHCP. I want a given MAC to always get the same IP) and would like to have some info on this.
(call this reserved DHCP if you prefer... )
View 4 Replies
View Related
Apr 12, 2011
How is it determined which DHCP hands out IP
View 1 Replies
View Related
Mar 4, 2012
A little background on me: I do performance testing for a large corporation, so networking is like an old hat for me - but this has me spinning because it makes no logical sense to me.Here's the layout of my home network:CableModem(passthrough) -> WRT120N -> ENH200 (Access point) -> ENH200 (Client Bridge) -> Netgear N600Both the WRT120N and the Netgear N600 are providing wireless access to clients at both locations. N600 is set not to route or DHCP, and the WAN port isn't used.Initially the WRT120N wasn't in play because the cable modem was serving DHCP, but it wouldn't successfully send DHCP to most clients on the other side of the client bridge. So I installed the WRT120N (old, I know) and it was able to serve up DHCP to any and all systems... for a while. Now DHCP doesn't appear to be working fully again on the Netgear side of the bridge. One device registers in the WRT120N, the client list shows the mac as getting assigned an ID, but the device never actually pulls the address. Static works fine. Those that already have DHCP addresses work like a charm, so I know the link is stable. pingtest.net reports near perfection.
View 4 Replies
View Related
Mar 9, 2012
I have a question regarding setting up a wireless access point on a network. Lets say my router is going to connect to a switch. The switch puts out 192.168.4. addresses. I want the wireless router to do the same. So I turn off DHCP.Everything works fine and everyone can communicate. Here is my question. How do I ever connect back to the wireless router if I need to change the settings? If the wireless routers address is 192.168.1.1 I cannot get back to it since i am now on the 4. subnet. I have also tried changing the router's ip to an address on the subnet such as 192.168.4.100 but on two different routers this didnt work. One didnt me and said there was a conflict with the WAN IP. The other one would not let me get on the internet.
View 1 Replies
View Related
Nov 27, 2012
I have a problem with my home network (diagram attached below). I sporadically lose connection between my Router and the devices behind the switch. I have replaced the Ethernet cable between the 2 so I don't think the problem's there. It will work for a week or so, then just lose the connection. I then try a combination of rebooting all of the devices on the network and/or unplugging and re-plugging the cable connections and sometimes that works. It's a relatively new router, but can a router be "underpowered" for pushing a signa
View 2 Replies
View Related
Nov 1, 2012
There is a device which is connected to the PC via Lan. I have an exe file which is supposed to get connected to that device and perform some operations. However, the problem is, the exe file tries to connect to the local host ip address 127.0.0.1 and i cant change the ip since it's been coded.So, I'm wondering if i can use the device connection (which already has a different ip like 169....) as a local host connection. So whenever it tries to connect to the loopback 127... it automatically connects to the external device.
View 2 Replies
View Related
Feb 14, 2013
am trying to connect my laptop withgalax tab via mobile AP configuration, it give me this error {dhcp is not enabled for wireless network connection}
View 1 Replies
View Related
Sep 14, 2011
Internet Connection Sharing. On one of my pc's with Win 7 I try to use ICS and it does not work. I have tried forcing the ip address on the LAN connection on the host computer (192.168.0.1 or something) and it will not assign an IP address to any device hooked up to it.On my macbook running Win 7 and all the settings the same, all of the same devices work fine. I tried using a cross-over cable and switch (not at the same time) with no luck. Not using any firewall and I've tried for days.
View 1 Replies
View Related
Sep 3, 2011
My pc will connect everywhere else but my house and my brothers laptop will connect at my house. I have no green light on my Ethernet cable, when I try to see my ip address it says media disconnected. I've uninstalled and reinstated my driver.
View 19 Replies
View Related
Feb 17, 2012
How do i get connection on my tablet when not at home?
View 3 Replies
View Related
Jul 20, 2011
Newbie network admin here and I'm having problem dealing with my LAN. I have two networks 192.x.x.x and 10.x.x.x, Configured at my Astaro 220 UTM, which obviously where the gateway is, from my UTM I have 3 isp connected which is the source for my internet. Now from astaro to my core there are two connection, 1 for the 192 network and the other is for the 10 network and from the core there goes my LAN where switches are cascaded.My problem is i'm having slow connection accessing from 10.x.x.x to 192.x.x.x network vice versa. what are the possible solutions is applicable, or the things I should check. plus I can't access(configure) my switches which is on the 192 network from 10.x.x.x. network through web.
View 1 Replies
View Related
Aug 12, 2011
I have been using the subject Wireless Router for more than 2 years. Most of the time it worked OK but lately it has been giving issues. [code] Due to a recent power outage, I had to reset the setting on the Dlink router. One of the issue is after resetting the Internet options and rebooting the router when I go back to the system screen, both the Release and Renew buttons are greyed out.I have tried to reboot the router as well as cable modem without any success. The Cable Modem is Motorola SB5120.
View 3 Replies
View Related
Oct 26, 2011
I have a very high speed connection in my dad's office, and it is over 10 mbps. and the connection in my house is worse ( 256 kbps ). So can I use the office connection in home without any problems from the ISP. just like sharing the connection from the office to home.
View 7 Replies
View Related
Sep 17, 2012
I have Wi-Fi in my house and we able to connect my mom's laptop, her smart phone, and my iPod touch to it, but I just got a used PC from my grandfather and have no clue how to get internet on it.My family already has a PC with a DSL modem and wireless gateway connected to it. We do not have a "router" and the only phone jack in the house has the DSL modem connected to it.From my understanding, the easiest fix is to make my "new" PC Wi-Fi capable, but how do I do it? It is running Windows XP.
View 3 Replies
View Related
Mar 17, 2013
To extend my wired ethernet I have purchased a WAP300N access point and connected it according to the instructions. I can see the AP from a wireless client and connect, but no IP number is provided to the client. The AP is connected to a router which has a DHCP server via wired connection (though a switch). The AP does it self get an IP number from the router but does not pass through DHCP requests from the clients.Occasionally an IP number is provided, but then there is no route to the LAN or the WAN on the other side of the AP.I have tried a whole lot of things to make it work (and been in the internet chat for two hours with a Linksys supporter, who could not make it work either).I have tried to set the IP number in the AP to static.I have tried to remove security (has to be WPA2 eventually, but for the sake of testing it has been removed)I have tried to factory resetI have tried to reinstall the firmware (the same version as the factory installed)etc.
View 4 Replies
View Related
Apr 28, 2011
Is it possible to connect two distant sites e.g. 30 miles wirelessly? Will there be any issues with Line of sight and interference? Will it be a better solution compared to that of wired counterpart?
View 3 Replies
View Related
Jan 9, 2013
I have a PC that connects to a wireless connection. I would like to share this connection with MORE THAN ONE PC. I have read it is possible to share it with ONE other PC via a crossover cable.I would like to share this to a router so that the PCs connected to the router can use this connection. Is this possible?If so, what would I need?(Other than a crossover cable and router)Side note: I'll be sharing this connection to a wireless router - so I'm hoping to basically relay the connection that way.I know it is possible to buy extenders that extend the range of wireless connections, but this is where the restrictions come into play...-We are not able to network these computers on the wireless network, as we do not manage it and have some quite strict privileges.-The router will also be used to share a hard drive via USB.
View 2 Replies
View Related
Dec 27, 2011
Is there any reason to apply qos to a 1.5 mbps connection. i had comcast with a 15 mbps connection and qos was good for when downloading large files and gaming and all that at the same time. but i have moved and i only can get dsl at 1.5 mbps.
View 10 Replies
View Related
Dec 26, 2011
i have a wireless adapter connected to a different wireless network. now the issues is i have my own router which i want use for my ps3 and phone to access my files from my pc but every time i connect my router, it switches from my wireless to LAN by default hence no internet connection.i want to be able to use my wireless connection for internet
View 1 Replies
View Related
Feb 10, 2012
I have connected my Vista laptop to my old XP laptop using a network cable so that I can share files, printers, etc freely.I have forgotten the correct proceedure for doing this, although the two computers eventually, after a long time link up and I am able to share files. I have done nothing else. I have not entered numbers or anything. The number spaces are blank.I do not understand why it is working at all, but how do I speed up the connection?
View 14 Replies
View Related
Dec 30, 2011
I have a Linksys/Cisco wireless router. For the purposes of a high def throughput, I have a wired connection from the router to a Windows Media Center appliance in a separate room.However, now I have a second media appliance (Roku device) that I want to run in a wired fashion as well. Here is the thing, I don't want to run a second Ethernet line from the router to new roku device. Is there some way I can share the existing ethernet line between the roku device and the media center appliance? Ideally, since the two devices would never be used at the same time, I was hoping some other network device (another router?) could be hooked up to split the line between the devices. Worst case, is there some simple splitter I can use? Obviously I am trying to avoid the worst case scenario: switching the ethernet connection manually between the two devices every time I want to go from one to the other.
View 6 Replies
View Related
Oct 3, 2011
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....) I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 1 Replies
View Related
Jan 14, 2013
We had 2 laptops and a pc working through a router with no internet problems. My wife's Toshiba laptop had other problems so IT guy at the college where I teach did a clean install of XP and checked the machine in his office, including internet. No problem. Brought machine home and no internet connection. My laptop works fine on wife's cable to the router. Wife's Toshiba has wireless but cannot establish connection with wire.Another tech guy who lives above us took the laptop up to his place - no connection. Back in the office (different building)- connection. The IT men are baffled. Me too.
View 5 Replies
View Related
