D-Link DIR-615 :: Notebooks Won't Connect After Changed To Cable

Apr 4, 2011

Laptop, Desktop with USB stick, and 2 notebooks all were working fine on wireless prior to switching from phone line, to high speed cable connection at router. Have tried reset, unplug power, reinstalled router and everything else I could think of but none of them will connect. Shows a good strong signal from router but will not connect. Re-entered numbers, password etc as well in all other computers. What else to try other than a new router?  Could it be coincidence that router decided to quit, around same time as changeover? Cable connections good and main computer connected via cable works ok, just all wireless not working.

Can't log in to d-link either. wrong password,?  Type in admin, but won't log on without password and I tried but won't accept . Hitting reset and then retry didn't work  either?

View 3 Replies


ADVERTISEMENT

Linksys Cable / DSL :: X3000 None Of Wire Attached IPads Or Notebooks

Sep 16, 2012

I have a small home LAN of four hard-wired PCs and two iPads and two notebooks which are connected by wireless.  At the heart of it all is a Linksys X3000 wireless router.  Any of the four PCs that  are hard wired to the X3000 have no problems talking to each other but none of the wireless-attached iPads or notebooks are able to see any other machine on the network.  All machines are able to access the Internet.

View 9 Replies View Related

Changed From D-Link To Netgear Router - Cannot Connect To MSHOME Network

Feb 27, 2012

Changed from D-Link to Netgear router now only one of two computers cannot see the other. Error shows cannot connect to MSHOME network, need administrative approval. Computers are ethernet connected to the router. Have McAffe and both computers are "Trusted" Can do a search with XP and it shows the missing computer but unable to make a connection.

View 5 Replies View Related

TP-Link Ssid Being Changed

Apr 11, 2013

i have 7 AP's in a school...i have numbered them 1 to 7 and have a strong password on im being called out every few months to reset the AP as its not working when i get there i see the ssid has changed to hp-josh1a seems like a computer name (its different most times) how are they changing the ssid of the tp link?

View 14 Replies View Related

Linksys Wireless Router :: WRT54GH Connecting Wirelessly With 3 Different Notebooks Without Success

Jul 10, 2011

I just installed WRT54GH and wireless was working fine, after almost 3 hours passed I lost connection with it.I tried to connect using wireless with 3 different notebooks without success. Just using cable it works.I upgraded firmware from v1.0.010 to v1.0.01 but still not working.

View 7 Replies View Related

D-Link DIR-615 :: SSID Name Changed By Third Party?

Jan 13, 2012

I had something odd happen to my Dlink router  DIR-651 model.   During the early evening hours someone changed the SSID name of my Router.   Nothing else changed that I could see right off.   So I reset the router to Factory Defaults.

View 1 Replies View Related

D-Link DIR-655 :: Access Control When IP Or MAC Can Be Changed

Dec 31, 2011

DIR655 with 1.33NA firmware.  I'm trying to determine how to block access to the internet for a specific LAN computer when the user knows how to change a MAC address.  I don't want to turn MAC control on and grant only to listed computers - the list doesn't accommodate enough MAC addresses, and the client has wireless and wired since it's a laptop.  I also don't want to set static IPs on all of the devices since some cannot accommodate that feature.I'm thinking that reserving an IP address isn't ultimately the solution either, since assigning the IP isn't going to work if the MAC changes. how to use access control under these circumstances?

View 1 Replies View Related

D-Link DIR-600 :: Network Password Mysteriously Changed

Dec 13, 2012

I have DIR600 Rev. B1 for about 2 years, and it's been working without a problem.Suddenly yesterday,  I could not connect to the internet from my 2 laptop & blackberry.SSID & signal reception looks normal.  On checking into the router's  web interface, I noticed that the network key was changed into something else.....normal character like y2tz39s.

I'm being very curious.  Has it been hacked ?  Is it possible?I'm using WAP/WAP2 Security Setting for wireless connection.All other settings seems intact (firewall & even the SSID).  Only the password was mysteriously changed. If I consider it being hacked, I wonder why the hacker didn't mess up all other settings ?

View 1 Replies View Related

Changed From WPA To WEP Now Won't Connect

May 1, 2011

All theres a problem with my internet connection because recently i saw that my Nintendo ds couldent connect to my WPA connection so i logged into my router and done the idiotic thing of changing my connection from WPA to WEP and now i cant connect to the internet so when i try to connect it just says aquiring network address then stops eventully saying limited or no connectivity. I tried logging into my router again but apparently i need an internet connection

View 4 Replies View Related

D-Link DCS-930L :: Firmware Update Changed Language To French?

Sep 20, 2011

Received a replacement DCS-930L today; using WPS, did setup wirelessly; all OK. Then did firmware update wirelessly (with second, DCS-932L,  turned OFF). The v1.03 firmware file was the same one I previously used, I think. Amazingly, The camera menus are now in French, and I can't find a setting to change it to English.

View 1 Replies View Related

D-Link DCS-930L :: Changed Port Number Now Cannot Access Video?

Nov 26, 2011

With basic "Wizard" setup I got DHCP and port 80 for the camera.  It was working just fine with MyDLink and locally with DLink-ViewCam software and some local test web pages. However, we have a wireless printer on that router which also uses port 80, so when it was installed we set up a "port forward" for port 80 traffic to it for administration from other subnets.  How MyDLink website is able to tunnel through our hardware firewall and the wireless routers firewall to  communicate with the camera is not clear to me (perhaps someone can send me a link to an explanation??), but it works...Thus, to allow access to the camera from other subents, I wanted to change the camera's port from 80 to another, say 8181 and set up the appropriate "port forwarding for TCP and UDP.  All of the steps below were from a PC within the camera's subnet/router so port forwarding is not an issue

View 5 Replies View Related

Changed Subnet And Now Can't Connect To Modem Ip

Apr 10, 2013

[code]...

Then I tried changing the subnet mask through lan settings in ipv4 by connecting the Ethernet cable but still no internet n no connection to the modem settings page as well.

View 8 Replies View Related

ISP Changed IP Address Now Router Will Not Connect?

Jul 21, 2012

I have a D-Link DIR-632 router flashed to DD-WRT.My original setup to my cable modem worked fine, i set up my wireless parameters via the DD-WRT software and everything was peachy until last week when my access (on the ISP end) was interrupted. Time Warner sent out a serviceman while I was at work and apparently he "Changed the IP Address".Now when I try to connect via my router, I get constant DNS errors (Windows 7 64 Pro).

View 5 Replies View Related

How To Connect Two Tp Link Wireless Routers With Cable

Jul 1, 2012

How to connect TP-Link 3G wiireless N router model:TL:MR3420 and WIRELESS N Router with ethernet cable to share internet

View 1 Replies View Related

D-Link DIR-601 :: Connect With Ethernet Cable But Not Wireless

Nov 27, 2012

I have just replaced a wbr-1310 with a dir-601. I can connect with an Ethernet cable, but not wireless. I have comcast cable with a Motorola surfboard modem. I was able to connect with the wbr-1310 with this setup.

View 9 Replies View Related

Verizon Changed Isp And Now Security Camera Can't Connect

Sep 9, 2012

My internet connection was lost and after calling Verizon, they talked me through adding a different isp address. Now my internet works, but when I went to my D-view cam (this is where the daily footage is stored for security camera DCS-930L), I can't make the connection. It says COM1 is not working. I know the camera works through the wireless router, but somehow the connection between the camera and the D-view cam doesn't.

View 3 Replies View Related

Cleared Cookies / Changed DNS But Cannot Connect To Facebook

Oct 31, 2011

Ok, it all started yesterday when I was stupid enough to open a link a friend sent me. It was of course a virus. I ran a couple of anti-virus/anti-malwere programs and I think I got everything cleared. However I am not able to connect to facebook - it says that it cannot connect securely to the server or that the link is broken, or that the "server refused the connection". I have no problems with any other site. I have Windows 7 and I usually use Google Chrome but I've also tried FireFox and IE - nothing works. I tried everything I could find on the internet - I cleared all the cookies, I changed my DNS

View 1 Replies View Related

Changed Modem To Zoom 5241 And It Will Not Connect?

Jul 4, 2011

I decided to get a faster modem since we are not streaming a lot more and started on the XBOX Live. I got a Zoom 5241 which seemed to have some good specs for what I need. I turned of my pc and unplugged my router when I connected the new modem. Before I connected the coax and ethernet, I held down the reset button, made all connections, waited 3 min., plugged in router...waited...powered up pc. Modem lights keeps cycling, DS flashes a while-then solid then US flashed-solid, then Online flashes-never solid and starts all over. Link light is continuously lit. I tried /renew, nothing.

View 1 Replies View Related

Protocols / Routing - Changed IP And Now Can't Connect To Internet?

Apr 6, 2011

Basically, I was following instructions of how to forward a port to get higher speeds on bitcomet.After doing allsorts which I don't understand (yes, very stupid I know, but I've learned my lesson now), I restarted my computer and have since been unable to connet to the internet.

I have tried a system restore which didn't work and also searched google for hours but to no avail.When I diagnose the problem with windows,it states," "Wireless Network Connection" doesn't have a valid IP configuration.I am running Windows 7 btw.

View 5 Replies View Related

IPod Won't Connect Because Of Wifi Password Changed

Feb 7, 2012

My mother accidentally turned off wireless or changed the password to the 2WIRE778 that we have and I can't get wifi on my iPod. So I have a small motorola router and it's wireless so if I hook it up to the original 2WIRE that has blocked wifi do you think I can get wifi off the second router with no password troubles or would I have to buy a special router that has no password? I don't know a lot about computers. And my Meyer has a password on our computer so I can't log on.   so if I just hook up the 2nd router and possibly get WiFi do I need to do anything such as setup on the computer or can I plug it in and just go?

View 1 Replies View Related

Unable To Connect Two D-link 24 Port Switches Through Cat 6 Cable?

Aug 9, 2012

I am trying to connect two D-link 24 port switches thru cat 6 cable, distance is less than 50 meters, but its not working but if i connecting it with a Laptop i am able to connect to the network. But if i connect the switch in between it fails i tried changing the switch and cable but no use anyone have a clue how it fails?

View 4 Replies View Related

D-Link DIR-601 :: How To Connect WAN With A Motorola SBG901 Cable Modem

Feb 13, 2012

I've been trying to connect my D-Link DIR-601 router with a Motorola SBG901 cable modem.  The modem itself has a built-in WIFI (G) and one ethernet port, but not good enough for my purposes.  I need more wired connections and an (N) WIFI connection, which the D-Link could provide, if I could get it to work.  I just cannot get the two pieces of equipment to talk to each other.  I can set up 2 independent LAN's, but no WAN (internet connection) from either.  D-Link has provided pages of instrutions, but nothing works. 

View 1 Replies View Related

Changed Modem From Belkin To Netgear - Linkstation Won't Connect

Feb 3, 2013

Buffalo Linkstation HD-H250LAN and Netgear N300 DGN2200v3 ADSL2 Modem Router.

3 PCs connect without a problem, 2 wireless and 1 wired, but cannot get it to recognise the Buffalo Linkstation. Netgear uses 192.168.0.1. but Belkin used 192.168.2.etc.

Linkstation setup says Linkstation not connected, but it is.

View 3 Replies View Related

Changed Router Firmware And Password / Now Laptop Won't Connect

Apr 20, 2012

My son decided to update our router firmware, together with this the password was changed. My computer which hosts the Internet connection works fine, all other laptops have now been connected successfully after simply changing the password. However my wifes laptop won't play ball. It is a Samsung R510, with Vista Home Premium OS. It worked fine prior to updating the firmware. I have been through the process of changing the password and have the correct security encryption in place, exactly the same process as with the other laptops.

It then says successfully connected, but shows in the bottom right of the screen, Unidentified network access local only and will not connect when the browser is opened. I have tried to diagnose but the usual windows prompt to reboot both modem and router has no effect. I have set it to private, as advised elsewhere, I have switched the firewall off and removed security software, all to no avail.

I tried the command prompt, then ipconfig/renew. An error occurred while renewing interface Wireless Connection: unable to contact your DHCP server. Request has timed out. No operation can be performed on Local Area Connection while it has media disconnected. Let me stress that no changes were made to the laptop at all, it is simply not connecting following the firmware update and password change. All other computers, and phones, 6 in total, are all working fine from simply changing the password.

View 8 Replies View Related

D-Link DIR-655 :: Won't Connect To Charter Cisco Dpc3010 Cable Modem

Feb 8, 2012

my dir-655 rev. A2 router won't connect to the new modem that Charter sent me. I had  the scientific Atlanta model dpc2100r2 modem but Charter called and said that they have upgraded my speed for free from 18/2 to 30/4 and that I needed a new docsis 3.0 compatable modem in order to take full advantage of the speed upgrade. I received the modem and connected an activated it according to their instructions. The modem works fine when connected to the PC only but as soon as  I connected to the dir 655 the link light went out on the modem and I lost my internet connection. The first step I took was to clone the mac address in Wan section of router. It still did not work. The next step was to turn the modem off, the router off and shutdown the PC. I waited until this morning to reconnect everything. I started the PC, then I started the modem and waited for it to stabilize and finally I restarted the router. I still had no connection. The status page of the router said that the cable was disconnected and that network was disconnected. There was no info to release so I clicked the renew button but nothing happened.

View 3 Replies View Related

TP-Link 150Mbps Wireless :: WR740N - How To Connect Internet Through Ethernet Cable

Apr 16, 2013

Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : I am trying to set up my router for about 2 days without any effect.

Here you can find, what I have to do to connect through Ethernet cable to the internet at our university:[url]....

When I set auto-detect IP on router, it says that I have Static IP. In CMD I can find out all the information about the connection and the licence is usually for one day (automatically renewing). I've also tried to clone MAC address, nothing happened.

View 1 Replies View Related

Linksys Cable / DSL :: Connect TP Link 901ND Repeater To Cisco WAG160N?

May 4, 2011

Connecting my TP Link 901ND repeater to my cisco WAG160N.  Modem router is working well but repeater doesn't seem to be repeating the signal.

View 1 Replies View Related

Belkin Routers :: G MIMO F5D9230-4 - Settings Changed Now Won't Connect To Internet

Dec 14, 2012

I believe we accidentally changed the NAT on our wireless g MIMO F5D9230-4 router. Now only one laptop is actually connecting to the Internet, but it looks like our network isn't secure anymore. Our 2nd laptop is connected wirelessly to the router, but not the Internet. Our iPhones and iPad are not connecting at all.

View 1 Replies View Related

Cisco Switching/Routing :: Connect 3550 And 3750 Through Cross Over Cable Trunk Link?

Jan 8, 2013

I am trying to implement in the lab. I have 2 switches 3550 and 3750. my questions are:
 
1. why i can't see vlans in the running config on switch 3750 even after i created 3 vlans?

2. the 3750 is power over ethernet switch and i am trying to connect 3550 and 3750 thru cross over cable trunk link and the ports doesn't show up no light nothing. is it the right way of cabling.

View 6 Replies View Related

Linksys Wireless Adapters :: WUSB11 Changed To WPA2 And Notice Wireless B Device Won't Connect

Nov 7, 2012

I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.

View 8 Replies View Related

D-Link DIR-655 :: Motorola SB6141 Link Speed LED On Cable Modem Never Glows Blue

Feb 26, 2013

when I connect my DIR-655 to the Motorola SB6141 cable modem I notice that the link speed LED on the cable modem never glows blue indicating a gigabit connection, it only glows amber indicating a lower negotiated speed.  I am using a Cat6 cable between the two devices and have also tried a Cat5e cable.

When I try and force the WAN port speed to 1000Mpbs in the router interface the cable modem link speed will not light at all with no connectivity. Only resetting to Auto WAN port speed restores functionality albeit at the lower negotiated speed setting.

I'm running the DIR-655 rev B1 at 2.03NA firmware level.

I did connect the modem directly to my PC that uses an Intel Gigabit ethernet card and still had the lower connection indication (Amber) so it seems that the modem might be faulty.

View 4 Replies View Related

DNS Changed By Itself?

Oct 27, 2012

Tonight I went to lay down in bed and decided to start up the Wii for some Netflix. About 30 minutes into watching my program, my connection suddenly cut out. I got up and checked my modem, and sure enough the "online" light was blinking.

I did the usual power cycle thing with no luck. The whole time I am thinking to myself "I swear I just paid that thing a week ago!". After power cycling 3 times, I decided to check the router settings by going to my router manager page (192.168.1.1).

I look through my basic settings when I noticed my DNS address was no longer set to "Get automatically for ISP". Well, that's not right. It now had a new primary and secondary DNS listed. I couldn't remember if either of those addresses were always there. I switched it back and like magic my modem connected again.

Should I be concerned by this? I remembered the big "DNSChanger" thing going around a while ago, so I checked the two numbers against the FBI database and both numbers came up clean.

View 4 Replies View Related

VM Connected To VPN Changed IP And Now RDC Isn't Possible

Feb 11, 2013

I ran into a bit of an issue today while testing a vpn software on a virtual machine(win7); I successfully connected to vpn, then the connection dropped and since with the vpn connection another ip address was assigned, now I'm unable to communicate with that VM.
I am able to find it in SCCM via hostname, but can't reboot it or start anything on it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved