Changed Subnet And Now Can't Connect To Modem Ip
Apr 10, 2013[code]...
Then I tried changing the subnet mask through lan settings in ipv4 by connecting the Ethernet cable but still no internet n no connection to the modem settings page as well.
ADVERTISEMENT
Changed Modem To Zoom 5241 And It Will Not Connect?
Jul 4, 2011I decided to get a faster modem since we are not streaming a lot more and started on the XBOX Live. I got a Zoom 5241 which seemed to have some good specs for what I need. I turned of my pc and unplugged my router when I connected the new modem. Before I connected the coax and ethernet, I held down the reset button, made all connections, waited 3 min., plugged in router...waited...powered up pc. Modem lights keeps cycling, DS flashes a while-then solid then US flashed-solid, then Online flashes-never solid and starts all over. Link light is continuously lit. I tried /renew, nothing.
View 1 Replies View RelatedChanged Modem From Belkin To Netgear - Linkstation Won't Connect
Feb 3, 2013Buffalo Linkstation HD-H250LAN and Netgear N300 DGN2200v3 ADSL2 Modem Router.
3 PCs connect without a problem, 2 wireless and 1 wired, but cannot get it to recognise the Buffalo Linkstation. Netgear uses 192.168.0.1. but Belkin used 192.168.2.etc.
Linkstation setup says Linkstation not connected, but it is.
CBN SVG6540E Modem - Internet Connection Changed IP
Aug 31, 2012While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling.
When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same.
I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds.
All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E.
Changed From WPA To WEP Now Won't Connect
May 1, 2011All theres a problem with my internet connection because recently i saw that my Nintendo ds couldent connect to my WPA connection so i logged into my router and done the idiotic thing of changing my connection from WPA to WEP and now i cant connect to the internet so when i try to connect it just says aquiring network address then stops eventully saying limited or no connectivity. I tried logging into my router again but apparently i need an internet connection
View 4 Replies View RelatedISP Changed IP Address Now Router Will Not Connect?
Jul 21, 2012I have a D-Link DIR-632 router flashed to DD-WRT.My original setup to my cable modem worked fine, i set up my wireless parameters via the DD-WRT software and everything was peachy until last week when my access (on the ISP end) was interrupted. Time Warner sent out a serviceman while I was at work and apparently he "Changed the IP Address".Now when I try to connect via my router, I get constant DNS errors (Windows 7 64 Pro).
View 5 Replies View RelatedVerizon Changed Isp And Now Security Camera Can't Connect
Sep 9, 2012My internet connection was lost and after calling Verizon, they talked me through adding a different isp address. Now my internet works, but when I went to my D-view cam (this is where the daily footage is stored for security camera DCS-930L), I can't make the connection. It says COM1 is not working. I know the camera works through the wireless router, but somehow the connection between the camera and the D-view cam doesn't.
View 3 Replies View RelatedCleared Cookies / Changed DNS But Cannot Connect To Facebook
Oct 31, 2011Ok, it all started yesterday when I was stupid enough to open a link a friend sent me. It was of course a virus. I ran a couple of anti-virus/anti-malwere programs and I think I got everything cleared. However I am not able to connect to facebook - it says that it cannot connect securely to the server or that the link is broken, or that the "server refused the connection". I have no problems with any other site. I have Windows 7 and I usually use Google Chrome but I've also tried FireFox and IE - nothing works. I tried everything I could find on the internet - I cleared all the cookies, I changed my DNS
View 1 Replies View RelatedProtocols / Routing - Changed IP And Now Can't Connect To Internet?
Apr 6, 2011Basically, I was following instructions of how to forward a port to get higher speeds on bitcomet.After doing allsorts which I don't understand (yes, very stupid I know, but I've learned my lesson now), I restarted my computer and have since been unable to connet to the internet.
I have tried a system restore which didn't work and also searched google for hours but to no avail.When I diagnose the problem with windows,it states," "Wireless Network Connection" doesn't have a valid IP configuration.I am running Windows 7 btw.
IPod Won't Connect Because Of Wifi Password Changed
Feb 7, 2012My mother accidentally turned off wireless or changed the password to the 2WIRE778 that we have and I can't get wifi on my iPod. So I have a small motorola router and it's wireless so if I hook it up to the original 2WIRE that has blocked wifi do you think I can get wifi off the second router with no password troubles or would I have to buy a special router that has no password? I don't know a lot about computers. And my Meyer has a password on our computer so I can't log on. so if I just hook up the 2nd router and possibly get WiFi do I need to do anything such as setup on the computer or can I plug it in and just go?
View 1 Replies View RelatedD-Link DIR-615 :: Notebooks Won't Connect After Changed To Cable
Apr 4, 2011Laptop, Desktop with USB stick, and 2 notebooks all were working fine on wireless prior to switching from phone line, to high speed cable connection at router. Have tried reset, unplug power, reinstalled router and everything else I could think of but none of them will connect. Shows a good strong signal from router but will not connect. Re-entered numbers, password etc as well in all other computers. What else to try other than a new router? Could it be coincidence that router decided to quit, around same time as changeover? Cable connections good and main computer connected via cable works ok, just all wireless not working.
Can't log in to d-link either. wrong password,? Type in admin, but won't log on without password and I tried but won't accept . Hitting reset and then retry didn't work either?
Changed Router Firmware And Password / Now Laptop Won't Connect
Apr 20, 2012My son decided to update our router firmware, together with this the password was changed. My computer which hosts the Internet connection works fine, all other laptops have now been connected successfully after simply changing the password. However my wifes laptop won't play ball. It is a Samsung R510, with Vista Home Premium OS. It worked fine prior to updating the firmware. I have been through the process of changing the password and have the correct security encryption in place, exactly the same process as with the other laptops.
It then says successfully connected, but shows in the bottom right of the screen, Unidentified network access local only and will not connect when the browser is opened. I have tried to diagnose but the usual windows prompt to reboot both modem and router has no effect. I have set it to private, as advised elsewhere, I have switched the firewall off and removed security software, all to no avail.
I tried the command prompt, then ipconfig/renew. An error occurred while renewing interface Wireless Connection: unable to contact your DHCP server. Request has timed out. No operation can be performed on Local Area Connection while it has media disconnected. Let me stress that no changes were made to the laptop at all, it is simply not connecting following the firmware update and password change. All other computers, and phones, 6 in total, are all working fine from simply changing the password.
Changed From D-Link To Netgear Router - Cannot Connect To MSHOME Network
Feb 27, 2012Changed from D-Link to Netgear router now only one of two computers cannot see the other. Error shows cannot connect to MSHOME network, need administrative approval. Computers are ethernet connected to the router. Have McAffe and both computers are "Trusted" Can do a search with XP and it shows the missing computer but unable to make a connection.
View 5 Replies View RelatedBelkin Routers :: G MIMO F5D9230-4 - Settings Changed Now Won't Connect To Internet
Dec 14, 2012I believe we accidentally changed the NAT on our wireless g MIMO F5D9230-4 router. Now only one laptop is actually connecting to the Internet, but it looks like our network isn't secure anymore. Our 2nd laptop is connected wirelessly to the router, but not the Internet. Our iPhones and iPad are not connecting at all.
View 1 Replies View Related2 Nics On Same Subnet Cannot Connect To Different Networks
Mar 22, 2013I have 2 nics in my win7 system, NIC 1 connect to leased line and NIC2 is connected to organization LAN for internet. Both the ip add are in same subnet. when both the cables are plugged in to nics, leased line link connected to nic1 goes down. It wouldn't come up untill the cable from nic 2 is plugged out.Basically i wish to be connected to both the networks simultaneously.
View 1 Replies View RelatedHow To Connect 2 Routers LAN - WAN And Create Subnet
Sep 8, 2012I'm trying to connect two routers and create a subnet but failing due to a little knowledge but no real understanding! I've read the ultimate setup thread loads of times but can't get my setup to work.
Here's the setup I'm trying to build:
Internet -> Master ADSL modem/router (No NAT, no DHCP) -> Slave cable router (NAT, DHCP)
I want to connect 3 Xboxes to the master router with external IPs to avoid the whole "moderate/strict" NAT nightmare. Then I'll connect everything else (PCs, Macs, wireless devices etc) to the Slave router which will assign IP addresses and do the NAT thing. Both routers are Netgear N150s (master is ADSL, slave is Cable).
Here's what I've tried so far:
Master router:
All IP addresses supplied by ISP
Internet IP: xxx.68.160.143
DNS: xxx.xxx.3.xxx and xxx.xxx.6.xxx
Router IP: xxx.68.160.142
[Code].....
Connect Two Computers Together - It Requires Both IP And Subnet Mask?
Mar 6, 2011I understand ip addressing and what a subnet is.But why is it sometimes I connect two things together,it always requires a subnet mask, and other times no? For example when I try to connect two computers together, it requires both IP and subnet mask.But if I use FTP software all it ask for is IP.Same thing when connecting to a website through their ip, doesn't require subnet.
View 6 Replies View RelatedRouters / Switches :: Connect Modem To Wireless Router / Modem Combo?
Aug 23, 2011My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View RelatedConnect Tata Photon Modem To Bsnl Wifi Modem Via Usb Port?
Jan 16, 2013I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedCisco Routers :: Connect To RVS4000 With Wrong IP And Subnet
Feb 21, 2013I tried to update our production switch over the weekend with a newer unmanaged Gigabit switch. Everything was fine after the change and the network had a noticeable change in speed.But when I came back in on Monday the Internet was down. So I tried trouble shooting the switch to see if there was a loop or something like that and put it into managed mode so I could look at the config page and take advantage of the STP function. When trying to get to the config page I entered the default IP into my browser and a logon appeared so I tried to login and it failed then I noticed that the title of the browser tab said RVS4000. So out of curiosity I entered the creds for the router and lo and behold it let me in to the router. The router has a static IP and is using a different subnet then the default IP of 192.168.2.1 that the switch has. I have put the old switch back and removed the new one from production but can still get to the router with either IP, it's static address and the 2.1 address.
View 4 Replies View RelatedCisco Routers :: Connect To RVS4000 With Wrong IP And Subnet
Sep 19, 2012I tried to update our production switch over the weekend with a newer unmanaged Gigabit switch. Everything was fine after the change and the network had a noticeable change in speed. But when I came back in on Monday the Internet was down. So I tried trouble shooting the switch to see if there was a loop or something like that and put it into managed mode so I could look at the config page and take advantage of the STP function. When trying to get to the config page I entered the default IP into my browser and a logon appeared so I tried to login and it failed then I noticed that the title of the browser tab said RVS4000. So out of curiosity I entered the creds for the router and lo and behold it let me in to the router. The router has a static IP and is using a different subnet then the default IP of 192.168.2.1 that the switch has. I have put the old switch back and removed the new one from production but can still get to the router with either IP, it's static address and the 2.1 address.
View 2 Replies View RelatedLinksys Wireless Adapters :: WUSB11 Changed To WPA2 And Notice Wireless B Device Won't Connect
Nov 7, 2012I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.
View 8 Replies View RelatedAdding A Subnet To A Switch On Different Subnet?
Aug 3, 2012What I am trying to do is I have one switch with say a 10.1.9.1 sub-net I need to have one of the ports to be trucked with two vlans one for DSL and the other for a local connection with the sub-net of 10.1.5.1 both of the sub-nets are configured in the core as 9 and 5 so I have port 0 set up as a trunk and it is set up as ge-0/0/0.0 vlan_5, vlan_192 on the 10.1.9.1 subnet switch. The DSL is working but the local is not pulling a 10.1.5.1 IP and has no connectivity. Everything looks as if it is configured correctly but still the DSl is working but not the Local connection.
View 2 Replies View RelatedBroadband :: Connect A Modem / Router To A Cable Modem?
Feb 7, 2012I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies View RelatedServers :: Switch / Hub Sufficient To Connect All PC's To Modem To Connect To Internet?
Apr 12, 2011I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View RelatedHow To Connect A Modem With Another Modem
Apr 23, 2012i have a at&t modem and wireless router in one. its the source of my internet and is in my office room and i was wondering if i can use my old westell wireless modem router and hook it up in my bedroom so i can have a better signal for my laptop and use an ethernet cable for other things like the tv and ect
View 1 Replies View RelatedDNS Changed By Itself?
Oct 27, 2012Tonight I went to lay down in bed and decided to start up the Wii for some Netflix. About 30 minutes into watching my program, my connection suddenly cut out. I got up and checked my modem, and sure enough the "online" light was blinking.
I did the usual power cycle thing with no luck. The whole time I am thinking to myself "I swear I just paid that thing a week ago!". After power cycling 3 times, I decided to check the router settings by going to my router manager page (192.168.1.1).
I look through my basic settings when I noticed my DNS address was no longer set to "Get automatically for ISP". Well, that's not right. It now had a new primary and secondary DNS listed. I couldn't remember if either of those addresses were always there. I switched it back and like magic my modem connected again.
Should I be concerned by this? I remembered the big "DNSChanger" thing going around a while ago, so I checked the two numbers against the FBI database and both numbers came up clean.
VM Connected To VPN Changed IP And Now RDC Isn't Possible
Feb 11, 2013I ran into a bit of an issue today while testing a vpn software on a virtual machine(win7); I successfully connected to vpn, then the connection dropped and since with the vpn connection another ip address was assigned, now I'm unable to communicate with that VM.
I am able to find it in SCCM via hostname, but can't reboot it or start anything on it.
Ip Address Changed From 192.168.1.1?
May 3, 2011when I did ipconfig it gave me 174.61.85.170. What to do
View 3 Replies View RelatedRouter Being Changed By ISP?
Jan 18, 2013ISP is Virgin media with whom I have been with for a number of years.Recently discovered that the package I have which is only broadband ,speed at approx 10mb at a cost of £22.50 has been overtaken by new package of a wireless/ethernet hub, which replaces my old tin box router, with a min speed of 30mb for the same price!As soon as I raised the obvious query with Virgin the router was placed in the post to reach me by next Tuesday.
View 3 Replies View RelatedCan't Connect Via LAN But Can Connect Via Wireless On Modem
Feb 20, 2011I can't seem to connect my laptop using my ethernet cable, but I'm able to connect it to the Internet using my wireless connection. Whenever I plug in the cable, my computer tells me that the LAN connection is connected, but I can't open a web page. I tried connecting the cable onto another laptop and it worked, so I don't know what's up with the LAN connection on mine.
Command Prompt Message after ipconfig /all:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
[code].....
Access A Ip-changed Computer?
Feb 25, 2013One of my domain pc has ipv4 selected as to obtain automatically.How can I configure my DC to ping or access that computer?
View 1 Replies View RelatedTP-Link Ssid Being Changed
Apr 11, 2013i have 7 AP's in a school...i have numbered them 1 to 7 and have a strong password on im being called out every few months to reset the AP as its not working when i get there i see the ssid has changed to hp-josh1a seems like a computer name (its different most times) how are they changing the ssid of the tp link?
View 14 Replies View Related