I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.
View 8 RepliesDoes the WUSB11 adapter support WPA encryption?
View 2 Replies View RelatedI bought this adapter (WUSB11) not knowing there were two different kind of wireless networks. We have a wireless-G router and NOT a wireless-B. I do not want to open the boxes to try the adapters. Will the wireless-B adapters be compatible with the wireless-G router?
View 5 Replies View RelatedMy husband got new computer. Installed the driver for his WUSB11 adapter and nada. Windows says the driver isn't installed. Linksys says its running
View 9 Replies View RelatedI've got a bit of an issue. A friend of mine has recently gotten windows 7 installed into his desktop. When he tried to install the network adapter (wusb11 version 2.8), it installed. However, when we searched for it in the device manager, it did not appear. does Version 2.8 only cover up to Windows XP or is there software to make it work for Windows 7?
View 3 Replies View RelatedWhat steps are required to install my WUSB11 ver 2.6 wireless adapter on my new Windows 7 machine?
View 1 Replies View RelatedI've just purchased a new router (WRT160N) and wireless adapter (WMP600N). The problem is that I cannot connect to the router when I have it set to WPA or WPA2. At the same time my laptop with Atheros 9285n connects to router and works perfectly. When the wireless security disabled the wmp600n connects to the router without a problem and shows 300mbps connection speed and laptop 150mbps. When the router is set to WEP both laptop and pc with wmp600n connect but work very slow - 54mbps only.
View 7 Replies View RelatedMy wifi was previously unprotected. I switched to WPA2 and now can't connect to my network. In the set up, it can't even see the adapter. The lights tell me that the adapter is talking to my computer. The ethernet and wifi lights blink. What can I do other than unprotect my network? How can I set this up manually if the computer can't even see it?
View 1 Replies View RelatedI recently upgraded the firmware on my wrt 160N v3 and changed the wireless security to WPA2 Personal from WEP (I needed to do this to get higher speeds from a recently purchased wireless adapter). Now the router stops transmitting a signal intermittently for about a minute before coming back on line. The time between droppages is also not the same. Before the firmware upgrade (and the change in security settings) the router was rock solid. Where I can get the older version of the firmware (which seems to be more stable than the current version)?
View 4 Replies View RelatedWhen I connect my WUSB54AG, Windows(xp) detects cohiba 3887 rev0 device and I can't install it. How can I fix it?
View 4 Replies View RelatedAfter a lot of effort I got my wireless adapter to work like it should without security. I set WPA 2 level security on my WRT54GS wireless router and then went to access the router (set up as an access point) with the WPC54G ver 2 adapter on a Thinkpad T22, it says I have WEP encryption and I cannot enter the passphrase I used for the router. It does not let me select AES. It says to pick AES or TKIP, but TKIP is the only choice.
View 1 Replies View RelatedI am trying to change the security on my router so I can use WPA2 AES security in conjunction with a media device. The router security page only gives me a choice of WPA2 Personal or WPA2 Enterprise (which requires the use of a Radius Server that I don't have).
View 1 Replies View RelatedI have a Linksys E3000, have had it successfully connected for three months now. Recently I attempted to connect my xbox 360 to the wifi and had issues connecting it. So I called ATT to obtain the PPPoE username and password, which they reluctantly gave me. Entered that into the xbox and still unable to connect, so I have given up on the xbox for the time being, I'll post that issue in a different forum. Where my issue is now is since contacting ATT the WPA2 password I set up for the router no longer works. I cannot access the router setup page, and I cannot add any new wifi devices. Although, all of the previously connected wifi devices are still connected to the router despite this issue. Is there anyway to make the old password work, or do I have to reset the router and start from scratch, and God forbid contact ATT again?
View 2 Replies View RelatedI just set up my e2500 from lynksys tech support with a motorola mode. i'm running dsl into my house laptops all connect no issues however my iphone 3gs will lose connectivity and received the ppoe failure this morning unplugging an plugging in both router/modem restes but that's a pain even doing a reset on my phone doesn't work.
View 4 Replies View RelatedDoes this device support Wireless Wake On LAN and if so, what does one need to do in Windows 7 to enable this function?
View 9 Replies View RelatedI recently bought an AE1000 wireless adaptor, but I have run into a problem.The range on the device is very low, as the only way to get full signal is when the router and device are right next to each other.I have read that this could be due to the device operating on 5.0Ghz frequency, and that this setting is changed through the Cisco Connect software. This software was not in the Setup CD, and the online installer did not install the software either.
View 4 Replies View RelatedI've purchased a wmp600n pci adapter january this year and installed it with no problems and did not encoutner a single problem with it until today. I use windows 7 64bit.
I've just came back from a 3 week absence and turned on my computer for the first time since i left. I notice that I have no wireless connection. So i go to network connections and realize that my wireless adapter dosent even show up..only my lan card. So i check my device manager, and under network adapters, i can see my wireless adapter, but with an exclamation mark next to it. I check the properties, and under the status box, it gives me this message.Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35).
So i do what it says, and flash my bios to the latest version. After the update, I check the device manager, and the error message is still there. I check my wireless adapter driver version and it is v3.0.2, which is the latest version according to the linksys driver download webpage. I've tried uninstalling and re-installing the adapter but no luck there. I also checked to see if maybe there was a problem with my pci slot and that was not the problem because I was able to use my older wireless adapter.
I have a Linksys model WRT3110Nv2 and I cannot connect when my security is set WPA2 and i type in the correct password. it has no problem connecting when I set it to an unsecure network. ???
View 6 Replies View RelatedMy iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem with this combination and/or is it meant to be, that only guest access gives an iPad connection?
View 6 Replies View RelatedI have kindle fire that is unable to connect to the wireless network.All otehr devices windows phone, xbox and laptop are able to connect seamlessly.Amazon also sent me a replacement, but the issue is still the same. The error is:
"Unable to connect to the selected access point, Please check the password you provided."
Also, I removed the security on the network to see if its able to connect without password.The state where it fails is Obtaining IP address and it fails again.
Cannot connect to network with WUSB11. A few days ago I installed driver version 4.0 on a Windows 7.0 OS. I was able to connect. Then I had to change the modem to a Motorola nvgs10. The wireless adapter recognizes the modem as it appears in my available networks from the systray. However it will not connect.
View 2 Replies View RelatedI picked up a AE3000 for an older laptop, but it will not connect to any network. It is on an older (01') dell laptop running XP SP3. I have tried using the disk and downloading the latest drivers on-line but no luck. It picks up all the networks around me and mine, but it says trying to connect and just can't. I tried it on another laptop and everything works fine. Is there an issue with this adapter and the original USB ports or XP in general? I have checked and rechecked the passcodes, I have deleted all of the profiles and started from the beginning again. I removed my anti-virus program as well as the last effort. Nothing I do seems to make a difference though.This is just used to access the internet on a laptop that is dedicated to a telescope.
View 4 Replies View RelatedI have a WET54GS5 that I can't setup:
I am running Vista and have the bridge connected to a WRTP54G wireless router...I have also turned with Windows firewall OFF. My network has been setup properly and all other components work fine.
I have tried the setup CD, but get the "The Setup Utility was unable to locate a Wireless G Ethernet bridge..." message.
I have also held the reset button for 30+ seconds and tried to log into the bridge directly using the IP addy (192.168.1.226)
I am having some trouble getting my computer with Windows XP to use the Linksys model WMP54G wireless - G PCI adapter to connect to the network in my house. I have installed the hardware and the drivers. When I open the view available wireless networks window my network shows up with two bars of strength. But when I select this network and click connect, I get an error message saying "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again." I have other computers connecting to this wireless network without any problem. The wireless router I am using is the model WRT150N wireless
View 6 Replies View RelatedBought the AE1000. Hooked it up to my desktop computer (Sony VAIO), and it immediately recognized my wireless network in my house. However, when trying to log on, it asks for the network key, which I correctly enter and it attempts to log on, but fails to connect! I have called Linksys, and they claim it is my ISP's fault. I called Comcast (My ISP) and they claim it is a faulty product.
View 3 Replies View RelatedI just moved an older Windows XP Desktop /w Service Pack 3 from my parent's house over to mine after having my laptop fail on me. It was previously connected wirelessly at their house with a Microsoft MN-510 wireless adapter. When I got it up and running at my house, it was not picking up any networks with the MN-510. So I picked up a new AE2500 today, thinking that the ancient MN-510 may be the problem. Plugged it in, threw in the disc and voila, it started picking up Networks. The problem is, It is not connecting to my Network. The router is a Motorola SBG901. I have already disabled the security on the router and made sure that the MAC Filtering is disabled, but it is still not connecting. There has been no other issues with connecting any of our other devices.
View 2 Replies View RelatedIt says my security key is incorrect when I know for sure it IS correct. I connect fine on all my other computers using the same key.
View 1 Replies View RelatedI just moved and when I unpacked my ANCENT desktop (circa 2005), the wireless adapter, that had worked with no issues in my last home, would not connect to the internet. I bought a new one, a My router and internet connection are working just fine, as I am able to get on my laptop with no problems whatsoever. After doing many online searches and two long chat conversations with Linksys tech support, no one can seem to figure out what the problem is. The last Linksys person I talked to suggested that it might be the router settings that are preventing my PC from connecting. My internet provider (who provided the router) confirmed that there is nothing with the settings to prevent me from connecting to any device.
This is what happened: I installed the software with my new adapter. It worked fine for a day or so until I rebooted my computer. My friend messed around with it and somehow managed to get it to connect again (he has no recollection of how he did this).
When I clicked on "Find Available Wireless Networks", NOTHING came up even though I knew I had not only my own network available, but others in my range. I finally managed (with Linksys agent) to stop the Linksys software from managing the connection, and got Wireless Zero Connection to manage the connection. So now, when I click on my network, I get a little box that says, "Connected!", however in the list of available networks, it shows my network and says "Not Connected". And of course when I try to connect to the internet it does not work.
I can't download a driver because I don't have the ability to hardwire this PC to the internet. Plus, I got it to work before, so I figure there must be a way for me to get it to work again.
Just got the WRT54G2 and setup it fine with or without encrytion and passwords - however when I setup the other 2 pcs on my network - the only way I can get them setup and going is WITHOUT encryption and password protection - setiing up without encryption on those works fine, but it defeats the purpose of what I'm trying to do. I was on the phone with Linksys for over an hour and they can't seem to get it to work either - guess they got stumped and after an hour - I was put on hold and then cut off.
View 9 Replies View RelatedI am installing a Cisco EA2500 wireless USB adapter to my old desktop (windows xp pro) and it keeps asking me for a WEP key/password to connect to my network that obviously must be 5 characters and my network/router is WPA2 and is more than 5 characters. How do I connect?
View 1 Replies View RelatedI have installed a wmp600n on my computor. It is running windows XP. I am trying to connect to my Virgin Media super hub. I put in my passphrase but it won't connect.
View 2 Replies View RelatedIve been reading the forums up and down about this device and i notice other threads with users having the "Exact" problem im having. Only problem is im noticing a simaalar theme to ech of those threads. The issue doesnt have a resolution.
With that said i figured i would give this a try regaurdless. The problem i have is very simple.
Windows 7 Yltimate 64 bit.
Motherboard: ASUS M4A785TD-V EVO
Proc: Phenom x6
Ram: 8 Gb
Ive tried all USB ports (2.0) on the computer and they all exibit the same said behavior. This being that when you turn the computer off, restart it, or put it to sleep...the AE1000 will not power on and has to be unseated from the USB port and then reseated before the device is seen by the system and then and only then does it fire up, connect and work perfectly.
The drivers i have used have been the ones off the CD, Then i removed those and downloaded the ones from the website. These drivers have been installed after removing the entry from device manager manually after attempts to use the normal method resulted in the same behavior.
Also i have installed this device on my Dell E6400, Dell D620 Running Windows 7 Ultimate 32 bit and 64 bit and they also exibit the same exact behavoir.
I cant get it to connect to internet, it keeps giving me an error message. I have windows 7 and Linksys WiFi Router E2500
View 1 Replies View Related