I have belkin f5d7632-4 router, it works ok wirelessley with my smartphone when it is 'open' but setting a passphrase on the router stops access from the phone even with the correct passphrase, other devices act the same as though it is the wrong passphrase
I've been given a F5D7632-4 modem router which is said to be in working order, but without the Setup Assistant Software CD-ROM. How can I get a replacement for this?
I recently rescued an old Belkin 54G router (Model: F5D7632-4) which I planned to use as an extra wireless access point towards the back of my house where I have some dead spots. I logged in on the Belkin's IP: 192.168.2.1 And went straight to change the IP and put it onto the same subnet as my router. I changed it to: 192.168.0.1 as I had it in my head my router was .254 My router is 192.168.0.1 so obviously this didn't do much and I couldn't access either device.
I unplugged my network and plugged directly into the Belkin to change to another IP and I cannot access it. The operation times out. I can access the normal router when I connect back up to the network fine. To solve this I decided to reset the router. The instruction manual for the Belkin says a momentary push on the reset will do a quick reset. while >20 seconds will perform a full hard reset. Both of these are signified by the power light flashing, and the reset is complete when the power light becomes solid again.
Unfortunately no matter how long I hold the reset button for, the light does not even blink and no reset happens. Obviously this may just be a dodgy reset switch, the router is getting quite old, so I will go in an short the reset pins by hand if I need to. The solution I am looking for is either to reset so I can start again - or obtain access to the router through some other means to change the IP and carry on. When I connect the Belkin to my network, the router cannot see it connected to it's Ethernet port. However the Belkin's link light occasionally flickers.
I know my Modem/router is old but I am connecting okay to the internet with my laptop, the thing is my husband has just bought a Google Nexus Tablet and although it finds my Belkin Modem (model F5D7632-4) it says it's finding IP address, then says its saved and then connecting, but it dont connect. Also there is no security on it and it wont find my model number to add the security, is it me or what?
I have Belkin F5D7632-4 ADSL modem/router and when I disable NAT the router says it has internet connection but windows 7 wont connect. I have tried to do a static IP but that doesn't cure it neither
So i got time warner cable and internet but for some odd reason a "wired" connection works perfectly fine but i cannot get any life out of my belkin n750 DB wireless router. ive hooked it all up modem to router to pc nothing so i reset everything still nothing
I'm trying to set up a wired ethernet connection to a wireless Belkin router. The wireless router works fine - I have several devices that will connect wireless with no problem. The hp desktop I'm trying with the wired connection is showing that the ethernet connection is working, but it's not asking for the wireless network name or security code, and the internet will not work?I made sure the desktop was set up to automatically obtain IP addresses, then I did the "ipconfig /flushdns / ipconfig /release and ipconfig /renew commands, but it still won't work.
My Belkin N150 wireless router monitor has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you us a solution is available.I can not figure out why my wireless router doesn't work sometimes.I need to be able to access this to get to the router settings. I don't know if my wireless is being highjacked or what.
My computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7 Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
The other day my wifi was working the all of a sudden today my wifi stopped and said it's disconnected. On the router the only non-green light says "LINK"and it keeps flashing orange. How do i fix this because i cannot tweet pics from my phone without this working...
I have a problem with my Belkin router that is ruining any online gaming experience I want to have. Any time I try to play a game on my PC, I have to deal with STRICT NAT. On my router setup page I have all security features off, UPnP is enabled, and i'm pretty sure I have my computer in a DMZ. (As far as I know a DMZ'd computer should have an Open Nat right?)When I use run>cmd>ipconfig it says my ip address is 192.168.2.2, which is the same exact thing that is in my DMZ box, but it isn't appearing to work.Does anybody have an idea how to set up a successful DMZ on a belkin router?
Belkin Setup / Router monitor application has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I am having pentium p3 zenith make,window xp sp3 is the operating system. Belkin router N150 is being used.,I am able to get connection through this router on other p4 pc of my friend.,but when I try to connect to my pc.,belkin router set up do not display.,and diagnostic network connection ,indicate that error 12007 could not connect to HTTP,FTP etc., IE 8 and mozilla firefox are installed and both give the same error i.e. connection to internet could not be established
I have my downstairs PC (Windows Vista 64 bit) conncted to a Belkin router. model F5D7632-4. This works without any problems.Upstairs, my son has a PC (Windows XP) that connects via a Belkin USB G Network Adapter, model F5D7050, version 4.000uk. This worked perfectly, too.He has just got a new PC which I have bought from a friend. My friend used the tower of a previous PC my son had, which had died about 4 years back when the PSU blew and took everything out with it, and fitted the motherboard, graphics card, HDD, RAM etc etc (it uses Windows 7).
I downloaded the latest drivers from the Belkin site, installed them, but for the life of me, the new PC will not detect the network connection. At all. It doesn't find anything.So, I unplugged my PC from the router, and plugged the new PC into it. Unsurpisingly, it connected to the net without any problems. The next thing I did was to reconnect my PC to the router, and try my son's new PC wirelessly again with the Network Adaptor, in the same room. Again, it just doesn't find a network at all.The PC detects the Adapter being plugged in and out, and the light is on on it. I even tried his old PC with the Adapter, and that still finds the network perfectly.
I was on the phone to Belkin for 35 mins yesterday, and they went through everything, to no avail. They think the USB slots may be faulty, even though the PC knows when i'm plugging things into them.
Is there a way to quickly disable Wi-Fi on a N-150 from the router setup page? I have looked on my admin page but I don't see it. I just want to be able to turn the radio on and off from the PC that is connected via ethernet.
I have been receiving error messages that the router, model F9K1105 v3, was not connected periodically. The "fix it" option usually took care of it. Then I noticed that the indicator for the modem was showing the color grey instead of blue. I also became unable to access the settings with the default IP. I wasn't able to fix this so I tried to reinstall the software and reset the modem to just start all over. I was unable to get the computer to detect the router during setup. Unplugged, tried new cable etc. No luck. It was still saying it was unable to connect, and still unable to get to setup page. I happened to notice I WAS online and can connect to the router wirelessly with an Iphone.
What can I do to get the software to see that I am connected and how do I get to the setup page? Basically get everything to work like it did when I first installed it. Eventually I want to connect my old router to this one and use it as an access point.
On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
N600 DB on OSX. I keep on reading the material that there is a link on the dashboard that I click on to set up the router manually. Nowhere on the dash board is that link. Where is that link?
I lost the WEP key for my Belkin N+ wireless router.I bought a new wireless printer and cannot connect it through the router without the WEP key.How can I get the WEP key #.
I'm on talktalk and have been for a few years. They supplied me with a speedtouch 330 modem which has worked brilliantly, but now i am wanting to set up a router so i can connect to xbox live. I have a Belkin ADSl modem with wireless G router which i have tried to set up a number of times without success. I am trying to set the router up so that it has an ethernet connection to the computer and another ethernet connection to the xbox but i can't set the router up with the internet at all. To start with i am trying to set just the pc up. On the router, the power light is on, the ethernet port light is on, as is the wireless and the phone line one, but the internet light isn't on at all.
my Belkin routers wireless wont work. I tried unplugging it, resetting it, but nothing working. Ethernet is working fine, but I need wireless back ASAP.