I have Belkin F5D7632-4 ADSL modem/router and when I disable NAT the router says it has internet connection but windows 7 wont connect. I have tried to do a static IP but that doesn't cure it neither
View 1 Replies
how to connect my adsl connections with this router
View 1 Replies View RelatedI know my Modem/router is old but I am connecting okay to the internet with my laptop, the thing is my husband has just bought a Google Nexus Tablet and although it finds my Belkin Modem (model F5D7632-4) it says it's finding IP address, then says its saved and then connecting, but it dont connect. Also there is no security on it and it wont find my model number to add the security, is it me or what?
View 1 Replies View RelatedI recently rescued an old Belkin 54G router (Model: F5D7632-4) which I planned to use as an extra wireless access point towards the back of my house where I have some dead spots. I logged in on the Belkin's IP: 192.168.2.1 And went straight to change the IP and put it onto the same subnet as my router. I changed it to: 192.168.0.1 as I had it in my head my router was .254 My router is 192.168.0.1 so obviously this didn't do much and I couldn't access either device.
I unplugged my network and plugged directly into the Belkin to change to another IP and I cannot access it. The operation times out. I can access the normal router when I connect back up to the network fine. To solve this I decided to reset the router. The instruction manual for the Belkin says a momentary push on the reset will do a quick reset. while >20 seconds will perform a full hard reset. Both of these are signified by the power light flashing, and the reset is complete when the power light becomes solid again.
Unfortunately no matter how long I hold the reset button for, the light does not even blink and no reset happens. Obviously this may just be a dodgy reset switch, the router is getting quite old, so I will go in an short the reset pins by hand if I need to. The solution I am looking for is either to reset so I can start again - or obtain access to the router through some other means to change the IP and carry on. When I connect the Belkin to my network, the router cannot see it connected to it's Ethernet port. However the Belkin's link light occasionally flickers.
I have belkin f5d7632-4 router, it works ok wirelessley with my smartphone when it is 'open' but setting a passphrase on the router stops access from the phone even with the correct passphrase, other devices act the same as though it is the wrong passphrase
View 1 Replies View RelatedI've been given a F5D7632-4 modem router which is said to be in working order, but without the Setup Assistant Software CD-ROM. How can I get a replacement for this?
View 1 Replies View Relatedhow do you set up an ethernet port for DHCP with a Belkin ADSl modem with wireless G router, model number F5D7632-4?
View 1 Replies View RelatedI have a Belkin N150 wireless router. I have enabled MAC Address Filtering as an added level of security. However; whenever I access the router, and if I check that page; the check mark for the option to enable the filter is always blank.
I have checked the option, clicked Apply Changes, and logged out of the router. i went back in this morning, to check the security logs. (Looking like someone is trying to jump on my network) I didn't see anything there, but when I checked MAC Address Filtering; there was no check mark indicating that the filter was turned on.
For some reason my laptop has stopped connecting to my wireless network. It shows up as available with Excellent signal. I know the password is correct and that hasnt changed but now when i right click and connect it INSTANTLY says "Windows cannot connect to Area51" before it even seems like its tried. I gave windows a chance and see what it thought. Just told me to restart the router which i had already and that didnt work.Tried changing the encription method and its made no difference, be it AES, TKIP, AES + TKIP, WPA-PSK, WPA2-PSK. Every setting i try just doesnt work, but i can connect with my iPhone?!
Here is the details from CMD
Quote:
Wireless System Information Summary
(Time: 26/04/2011 19:31:38 GMT Daylight Time)
=======================================================================
============================== SHOW DRIVERS ===========================
=======================================================================
Interface name: Wireless Network Connection
Driver : Atheros AR9285 802.11b/g/n WiFi Adapter
Vendor : Atheros Communications Inc.
Provider : Atheros Communications Inc.
[code]...
belkin F5D8236-4 v1 will connect to windows xp laptop but won't connect to windows 7 laptop
View 4 Replies View RelatedMy WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies View RelatedI am using Windows 7, suddenly my network adapter has been deleted and i am unable to use Internet
View 7 Replies View Relatedvirus disabled my Network adapters and my internet dongle is "unavailable".....i removed all viruses but i m not able to use my LAN, Wifi, Bluetooth, Internet Dongle etc...
View 1 Replies View RelatedI have a windows 7 laptop and when I connect it the a wired connection it disables the wireless & 3G connections, but when I unplug the cable it doesn't renable the connections, I have to go into the network connections and select each one and renable it again.
View 6 Replies View RelatedDevice: Linksys WAG320N Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit
Firmware Version:V1.00.12
System: Windows 7 64bit Ultimate
Error: WAG320N is always disabled automatically by Windows 7 Each time power on WAG320N, it works well for a while ( 1 to 5 minutes), can also make the ADSl connection automatically. After that time, WAG320N is always disabled automatically by Windows 7. Need to manually Enable it in Windows 7, once it is manully Enabled, it work well for days.
I have disabled windows firewall in Windows 2003 server control panel but only few ports are shown opened when i scanned with advanced port scanner why other ports are closed.How to open the closed ports?
View 2 Replies View RelatedMy computer can no longer connect to the internet. As I do not use an Ethernet cable, my concern is the wireless aspect. I am running Windows 7 on an HP laptop, and when I troubleshoot the problem all it pops up with is "Local Area Connection 4 adapter is disabled". When I try repairs as an administrator it just repeats the fact that the adapter is disabled, but does not provide a way for me to fix this. I have also tried going through Control Panel > All Control Panel Items > Troubleshooting > Network and Internet and selecting the network adapter option, selecting the Local Area Connection 4 to diagnose. It then said troubleshooting couldn't identify a problem.
View 2 Replies View RelatedI have my downstairs PC (Windows Vista 64 bit) conncted to a Belkin router. model F5D7632-4. This works without any problems.Upstairs, my son has a PC (Windows XP) that connects via a Belkin USB G Network Adapter, model F5D7050, version 4.000uk. This worked perfectly, too.He has just got a new PC which I have bought from a friend. My friend used the tower of a previous PC my son had, which had died about 4 years back when the PSU blew and took everything out with it, and fitted the motherboard, graphics card, HDD, RAM etc etc (it uses Windows 7).
I downloaded the latest drivers from the Belkin site, installed them, but for the life of me, the new PC will not detect the network connection. At all. It doesn't find anything.So, I unplugged my PC from the router, and plugged the new PC into it. Unsurpisingly, it connected to the net without any problems. The next thing I did was to reconnect my PC to the router, and try my son's new PC wirelessly again with the Network Adaptor, in the same room. Again, it just doesn't find a network at all.The PC detects the Adapter being plugged in and out, and the light is on on it. I even tried his old PC with the Adapter, and that still finds the network perfectly.
I was on the phone to Belkin for 35 mins yesterday, and they went through everything, to no avail. They think the USB slots may be faulty, even though the PC knows when i'm plugging things into them.
My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
how do i secure a belkin router with windows 7
View 1 Replies View Related[URL]
I have the version 3xxx adapter yet I can't get it to work at all.
I've tried letting windows see it, manually pick drivers from the file I download, that doesn't work. I've tried using the installer and that only makes things worse. IT SAYS IT SUPPORTS 64bit 7!
I have a WUSB11 v2.8 laying around but that is even worse looking 64bit driver wise.
i am find the belkin wireless security key.
View 2 Replies View RelatedI am trying to use this belkin surf n150 in a Netbook thats is running Windows CE embedded 6drivers for windows ce6 and can not find any drivers
View 1 Replies View RelatedThis device used to work fine with my laptop but it has suddenly stopped working. I have tried turning it off and on again and unplugging it and trying it in different ports but to no avail. Do I need a new device driver? If so, where can I get one that is trustworthy and free,
View 2 Replies View RelatedI'm using Windows 8 and getting error 0x80040742
View 1 Replies View RelatedTried to install a n600 DB on a windows 8 computer. Got the message "Not compatible. When will it be?
View 1 Replies View RelatedI have replaced my father's wired modem (he's with [url]... in the UK) with a Belkin Surf+ (F7D2301uk) router running firmware version 1.00.16. When he tries to access the network from his Tosh C660 Win 7 Home Premium, 64bit laptop the network connection between the laptop & router disconnects after a minute or so. The only way to reestablish a connection is to Disconnect and Connect again in the Wireless Network section of Networking panel. But here's the weird bit. My own Mac Book keeps connected fine without any problems as does my Sony Ericsson X10 phone.
View 1 Replies View RelatedI cannot find any drivers for Belkin wireless adapter F7D1101 v1 for Windows 7
View 1 Replies View RelatedWhere do I find View Available Wireless Networks in Windows 7?In XP there is a network icon in system tray to right click but what about Windows 7?
View 2 Replies View RelatedI just bought this router for my new windows 8 desk top computer. I will be connecting it to the computer via ethernet. The box does not say that this is windows 8 compatible. Will this work with my new computer?
View 2 Replies View RelatedI installed Windows 8 yesterday. Now, when I start my computer, I received a System Error message for Belkin, although the router and Router Monitor appear to be working fine. I have monitor version 4.0.6.24160 and firmware version 1.10.16 (2012/6/12 1:10:17). My router is F9K1103 v1 (01A).
View 12 Replies View RelatedF7D4402nt play 600. i updated to windows 8 and the supplied software will not work. The software was very easy for a setup. Now i must do the things the hard way. a completely manual setup. it is a bit of a chore.
View 1 Replies View RelatedI have several laptops that work fine with my wireless router. I have a new laptop with Windows7 and it will not stay connected for more than a couple of minutes at a time. Are there any issues with this router and Windows7?
View 1 Replies View Related
