I bought a Canon Pixma mg3220 all in one printer/scanner today. I specifically picked it for the Airprint feature for my IPhone, which I can't get to work. Is it a problem with my F5D7234-4 v5 router? I have updated the firmware and it still won't print. The Iphone sees the printer, but that's as far as I get.
View 2 RepliesI am replacing my modem, and intend on getting one that supports IPv6. Does the Belkin model F5D7234-4 support IPv6, and does it need to?
View 1 Replies View RelatedI just switched from an AT&T T1 ISP to Comcast cable, which supplies a motorola modem, pushing 5MBPS downstream. This modem is not recognized by the router, a Belkin wireless G model, F5D7234-4 V5. After numerous attempts to restart both the modem and the router, the modem light does not turn on, nor is a wireless connection recognized by my computer, a new Macbook Pro. The router worked fine with the AT&T connection.
View 1 Replies View RelatedI cannot airprint. Contacted email support. Followed instructions to reset router. I did and I was able to print from my iPhone. ONCE. Then I installed my SSID and passwords and WIFI setup again and now I can't print. I have a brand-new airprint equipped HP 7520, an iPhone and 2 iPads.that I want to print from....the router is a N750 AV bought in July.
View 1 Replies View Relatedmy belkin G F5D7234-4 router internet light won't come on??
View 1 Replies View Relatedwe just got a computer with windows 8 and can't get it to hook up wirelessly. it recognizes the network but will not connect to the internet wirelessly.
View 1 Replies View RelatedI'm looking to purchase one because it's one of the only two Belkin models that supports WDS. The Belkin website however, says that the F5D7234 version 1router supports it. It doesn't have the -4 at the end. The one available to buy does have the -4 at the end of the model number, but it also doesn't say what version it is. Is there more than one version of this model?
View 6 Replies View RelatedI'm having a problem connecting with wireless card model number f9L1101v1 to a router model number F5D7234-4. the computer is dell dimensions 4400 desktop pc running windows xp, everything seems to be working correctly. i can see my wireless connection, signal strength is full, but when i enter the network key which i have confirmed is correct it will not connect. it goes to the window where it shows it trying to connect but after about 2 minutes the window disappears with no explanation for connection failure.the network key was confirmed through a laptop that runs on the same router.
View 2 Replies View RelatedI am moving my wireles router to a new computer (Belkin F5D7234-4V5Do i need software for it to work on my new computer and if so can I get it online.I can't find a software disc.
View 1 Replies View RelatedIs it possible/needed to update software for my Belkin G Wireless Router, Model F5D7234-4v4?
View 1 Replies View RelatedMY belkin router model no :F5D7234-4v1, recognizes only my laptop and my other devices such as mobile and tab are getting the signal and w-fi gets connected but the internet is not working. when contacted service provider he asked to upgrade the firmware. Is there any recent version firmware upgrade of the model. current version is F5D7234-4_UK_1.00.01.
View 1 Replies View Relatedwhat is the recent version Firmware update for Belking router model number : F5D7234-4v2
View 1 Replies View RelatedI am trying to update my F5D7234-4 G Wireless Router - Firmware and I am told No known program will open this file. This file is part of a program. What do I do?
View 1 Replies View RelatedI have a Belkin f5d7234-4 lying around at home. I also have a Panasonic TV which requires a proprietary wifi donge to get a wireless signal, so my question is, can I use the router to recieve my house Wifi (broadcast by my new NetGear Router) and send it out through its Ethernet port to the TV?
I checked, the router doesn't have ddwrt support, I'm new to hacking around with routers and networks, so I don't know how to do this, I see how it is logically possible
I've been trying to port forward my modem and router for Xbox 360 live. Only problem is, I know absolutely nothing about networking or configuring modem / router settings.Anyhow, I was told to put my modem into Bridged Ethernet mode. I tried, then I couldn't even connect to the internet anymore.my router model is a Belkin F5D7234-4 V5. My modem is a Motorola 2210-02-1006.
View 14 Replies View RelatedDoes the F9K1113 work with BT Infinity? I have tried to get this to work but I cannot
View 2 Replies View RelatedMy belkin , model# f7d5301 v1 is not compatible with my hp laptop.
View 1 Replies View RelatedHow to get "Video Mover" to work on my N900 DB. My TV has a DLNA client and can see other DLNA servers (PCs, etc.) but cannot see the Belkin.
View 5 Replies View RelatedI have several laptops that work fine with my wireless router. I have a new laptop with Windows7 and it will not stay connected for more than a couple of minutes at a time. Are there any issues with this router and Windows7?
View 1 Replies View RelatedI have just bought a n300 everything works well except i cant get my sky on demand wireless bridge to work , sky have said all ok, as have my broadband supplier. im told i need to maybe change my wireless settings in router !
View 2 Replies View RelatedI'm trying to get 'Access Control' working so I can limit Wi-Fi time on my kids iPod touches, but the settings aren't clear and the help file is not clear whatsoever.I've been testing it with my iPhone, I have the MAC added, but none of the options available will even stop my iPhone accessing the internet over my Wi-Fi.
View 1 Replies View RelatedI have just purchased the latest 2012 27" iMac and I would like to know if the Belkin AV360 (F2CD007) works with this iMac as it has thunderbolt ports and not the previous mini display ports that older iMacs have? I have searched online and asked Apple directly but they referred me to Belkin. I have emailed Belkin and the reply was not useful.
View 1 Replies View RelatedHow can I update my router if my Internet won't work with the router connected? Right now my Ethernet line is going directly from my PC to my modem. Belkin N750.
View 1 Replies View RelatedI have a Belkin AC1200 Router. It seems working properly re Internet/Wireless connections. When I connect a printer (Canon Pixma MP500) through the USB port the (USB) light doesn't turn on, nor the printer is appearing on the "available devices" (Belkin USB Print and Storage Center).
View 2 Replies View RelatedWill a Belkin N450 DB F9K1105 v1 work with Linksys PoE PLEK400 adapters?
View 1 Replies View RelatedMy WAG120N does not allow airprint from ipad/ipod to HP photosmart wireless printer. When i replace the linksys router with an old netgear one all works well and the ipad can find the printer and print. Enable the Linksys router and the printer is no longer found on the ipad. other forums suggest this relates to handling of the Bonjour protocol ... any resolution for this so i dont have to go back to legacy speed on my home wifi?
View 3 Replies View RelatedI am currently switching out our Cisco 1130 APs and Cisco Small Bussiness APs for Cisco 1142Ns (I will NOT be using a WLC),
I have setup the AP, and read about some issues with Multicast and Apple Bon. Services.
I ran the "no ip igmp snooping" command and it allowed be to access our AirPlay Devices (Apple TV, AirPort Express, Etc), however our 2 AirPrint devices (Xerox 6125N, & Canon IR3220 via AirPrint Activator) are not showing up at all when connected to the 1142 (they work everywhere else).
Everything is on the same subnet, and 1142 is connected to the same switch has the airprint devices, and one Apple TV.
Both our 3500 Series switches are connected via fiber, AP and AirPrint/AirPlay devices are in the same VLAN.
Recently i converted a customer's APs to LWAP and installed a 2504 WLC. Everything came up and is acting good, but the printer is no longer printing. It can neither be discovered using windows networking, nor bonjour. It worked until LWAPP conversion.
It is an AirPrint device, a Canon mx892. Trying to print using an IP port fails, AirPrint fails, and sharing it through the attached Mac also fails. I dont know enough about printers or AirPrint to effectively troubleshoot. The customer opened a case with Canon, who says its a network issue. I cannot get it configured on the wire, apparently setting up a printer isnt as easy as it used to be.
(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedHow do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies View RelatedI have a Belkin router and several Apple products. I understand that Belkin and Apple have communication issues. how to make these two work together better?
View 5 Replies View Related[URL]
I have the version 3xxx adapter yet I can't get it to work at all.
I've tried letting windows see it, manually pick drivers from the file I download, that doesn't work. I've tried using the installer and that only makes things worse. IT SAYS IT SUPPORTS 64bit 7!
I have a WUSB11 v2.8 laying around but that is even worse looking 64bit driver wise.
I have a Belkin wireless router F5D7234-4 it was working and i was able to connect to 192.168.1.1 now i can't and on my router the only lights that are on are the power and wireless , internet light is not on. i don't kn ow what happened because the internet light was on and i was able to connect to 192.168.1.1 my daughter wants internet on her Wii and it wont work because my router isnt working right..
View 1 Replies View Related