I bought a Canon Pixma mg3220 all in one printer/scanner today. I specifically picked it for the Airprint feature for my IPhone, which I can't get to work. Is it a problem with my F5D7234-4 v5 router? I have updated the firmware and it still won't print. The Iphone sees the printer, but that's as far as I get.
I'm looking to purchase one because it's one of the only two Belkin models that supports WDS. The Belkin website however, says that the F5D7234 version 1router supports it. It doesn't have the -4 at the end. The one available to buy does have the -4 at the end of the model number, but it also doesn't say what version it is. Is there more than one version of this model?
I'm having a problem connecting with wireless card model number f9L1101v1 to a router model number F5D7234-4. the computer is dell dimensions 4400 desktop pc running windows xp, everything seems to be working correctly. i can see my wireless connection, signal strength is full, but when i enter the network key which i have confirmed is correct it will not connect. it goes to the window where it shows it trying to connect but after about 2 minutes the window disappears with no explanation for connection failure.the network key was confirmed through a laptop that runs on the same router.
I just switched from an AT&T T1 ISP to Comcast cable, which supplies a motorola modem, pushing 5MBPS downstream. This modem is not recognized by the router, a Belkin wireless G model, F5D7234-4 V5. After numerous attempts to restart both the modem and the router, the modem light does not turn on, nor is a wireless connection recognized by my computer, a new Macbook Pro. The router worked fine with the AT&T connection.
MY belkin router model no :F5D7234-4v1, recognizes only my laptop and my other devices such as mobile and tab are getting the signal and w-fi gets connected but the internet is not working. when contacted service provider he asked to upgrade the firmware. Is there any recent version firmware upgrade of the model. current version is F5D7234-4_UK_1.00.01.
I just bought Lenovo ideapad with window8 and touch screen, my problem is when I try to connect it through my belkin n300 is always saying restart the computer. when I plug in Ethernet cable from the router to the laptop is working fine.
I've been using Belkin modem/routers/network adapters for years and am quite happy with my current Belkin N+ wireless router (model F5D8635-4 ver1). I am in the process of upgrading my home broadband from ADSL to ADSL2+ which, in theory will increase my download speed from approx 5mbps to 17mbps. I have been offered a free Thomson (Technicolor TG582n Pro) router. This will involve reconfiguring the current set up with all the devices currently connected to my network. Not a big deal but will there be any benefit over my existing Belkin set up?
I was told by my Internet company that my router may not be compatible with my new modem (from them). I have a Basic Wireless Router. Model f7d1301. Purchased about 1 year ago. I was told that Belkin designs it this way so we have to buy a new one regularly. But 1 year!!! That is terrible. Is it true? Is this older router no good? I have purchased a new one and it seems to,have solved the problem. It does take me very happy that I already have to buy a new one....
I just bought this router for my new windows 8 desk top computer. I will be connecting it to the computer via ethernet. The box does not say that this is windows 8 compatible. Will this work with my new computer?
My wireless internet company recently installed a Belkin N600 router. I had a Linksys G router with a Linksys Booster in the past. The design of my house makes my signal difficult to get in multiple locations which is the reason i had the booster. My question... Is the linksys booster compatible with the belkin router or am I going to have to by a belkin booster to increase my coverage area
If the Belkin Surf N300 (Model No F9J1002v1) is CN21/ADSL2 compatible? It doesn't mention it on the box and try as I may I can't get through to tech support UK as I keep getting cut off and the J model router is not recognized on the UK website only the K
I have a Belkin f5d7234-4 lying around at home. I also have a Panasonic TV which requires a proprietary wifi donge to get a wireless signal, so my question is, can I use the router to recieve my house Wifi (broadcast by my new NetGear Router) and send it out through its Ethernet port to the TV?
I checked, the router doesn't have ddwrt support, I'm new to hacking around with routers and networks, so I don't know how to do this, I see how it is logically possible
I've been trying to port forward my modem and router for Xbox 360 live. Only problem is, I know absolutely nothing about networking or configuring modem / router settings.Anyhow, I was told to put my modem into Bridged Ethernet mode. I tried, then I couldn't even connect to the internet anymore.my router model is a Belkin F5D7234-4 V5. My modem is a Motorola 2210-02-1006.
Currently, I have setup a demo lab with the UC320W + IP Phones and OnPlus Network Agent all connected to a SG300-28P. I have just obtained an SRP547W because I wanted to use the 3G/4G internet connection via the router as my demo lab is an isolated network.Now, I tried to a couple of 3G modem (UMG181) and 4G Telstra modem (MF821) on the SRP547W but none of these work. I had a look at the compatibility tableI guess those modem models are not listed there. However, when I went on say the Optus website to scout for a more compatible model, none of them hit it right on the mark. The matrix says it can support E180 (while Optus has the E188), E353 (while Optus has the E353). I have already wasted my money on getting the earlier stated 3G/4G Modems and I ain't going to take a chance again.
I am running firmware 220.127.116.11 on an RV180. After recently upgrading to Microsoft Internet Explorer 10, I notice the RV180 administration screens do not display properly. Specifically, the horizontal window pane is set so high (not adjustable) all the information is not fully displayed. If I use a previous version of Internet Explorer I don't have a problem or if I use another browser like Google Chrome I don't have a problem. So it appears the RV180 and Internet Explorer 10 are not fully compatible.
Below is a screenshot using Internet Explorer 10 showing the Status page. You can see the horizontal window cuts off most of the information and there does not seem to be a way to "pull" it down to display more information.
Here is the same Status Dashboard selection via Google Chrome. Unfortunatly I don't have Internet Explorer 9 still installed, but it worked fine.
One of our locations recently upgraded their VPN router from a Netgear FVS318 to the Cisco Small Business Router RV042
My location uses the Linksys RV042v1.2. We can't get the VPN to connect. The VPN set up screens are similar, but there some parameters that we had to adjust. The SA Lifetime parameter for the Cisco Router defaulted to 86400 Secs (Phase 1 & 2) The SA Lifetime parameter for the Linksys only goes to 28800. So we adjusted the Cisco RV042 to match out Linksys RV042.
That's the only difference in the screens that I see. The Cisco has additional paramters under "Advanced", but they're all unchecked by default.
When they shipped the Netgear FVS318 over to us, we get the VPN to function, however, the Netgear has a max throughput of 10Mbps. (we get 4-5Mbps on Speedtest.net). The RV042 gives me over 40Mbps (Optimum Business w/Ultimate)
I tried both firmware updates on the RV042v1.2 RV042 v18.104.22.168 RV042 v1.3.13.02
Any compatibility issues between the different versions of the RV042?