Linksys Wireless Router :: Septup OpenVPN In E4200 Without Installing Dd-wrt?
Sep 14, 2011Can I septup an OpenVPN in an E4200 without installing dd-wrt?
View 7 Replies
ADVERTISEMENT
Linksys Wireless Router :: Linux OpenVPN Connection Through E4200
Jul 6, 2012When I try to connect OpenVPN through an E4200 v2 router from my Linux Fedora 16 client, the connection hangs. The connection log show that OpenVPN has connected to the VPN server. Internet also freezes until I disconnect OpenVPN.
OpenVPN on Windows works fine through the E4200 router.If I connect the Linux client directly to my Inteno fiber router, OpenVPN works fine.Passthrough is enabled in the router, and I have configured QoS and port forwarding for port 1194. The router has firmware version 2.0.37.
Linksys Wireless Router :: Installing Cisco Connect For E4200?
Jul 28, 2011I just got a new E4200 router and downloaded Cisco Connect from the web site...file name CiscoConnect.E4200.1.4.11160.2.exe. When I try to run it, I find through Task Manager that Setup.exe is using about 35 to 40% CPU, but I'm never even getting to anything on the screen, nor is Task Manager even showing it as a running application. I'm running Windows XP SP3 (latest updates). I tuned off the AVG virus scan. But it still just seems to hang. BTW, I used the web interface to fully configure the router and it works fine so I could get by without Cisco Connect, but it might just be easier to use.
View 4 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR4300 - OpenVPN UDP Connections Are Being Blocked By Router
Apr 14, 2013Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Latest
ISP :
The UDP connections are being blocked when I use my VPN. I can connect for a while but soon after a while, the connection doesn't work. I can't even access the router page.
Linksys Wireless Router :: Installing E1000 From CD After Reformat?
Mar 27, 2012I recently had to reformat, and I tried to re-install my E1000 Wireless N router from the CD. Even after entering my network name and password, it said it was unable to connect to my network. My internet works fine - I just can't make my computer in control of it again. I have several devices connected wirelessly, including an Ipad, and they all get internet fine. how to get the program installed so I can change settings again?
View 1 Replies View RelatedLinksys Wireless Router :: Installing EA4500 With Cable ISP?
Jan 10, 2013getting ready to do the install of a EA4500 with a Cable internet provider. I found the site on Cisco on how to manually install the router with Cable [URL]It advises to first install using the software that comes with the router.It then gives the following steps:
Step 1:Access the router’s web-based setup page. For instructions, click here.NOTE: If you are using a Mac computer to access the router’s web-based setup page, click here.
Step 2:On the Setup tab, click the MAC Address Clone sub-tab.Step 2:Check the Internet IP Address. If it has numbers, this means the router has been properly configured.
NOTE: If the Internet IP Address values are showing up 0.0.0.0, click on Release IP Address then the Renew IP Address buttons.NOTE: For wireless-B and wireless-G routers, click on the DHCP Release and DHCP Renew buttons. MY QUESTION: are the steps above something that definately will need to be done or is that in the case that it's not configured via the installation using the software?I have this same router installed at my home however I use DSL internet and my daughter uses Cable internet so I want to make sure I am positive on the steps prior to installing.
Linksys Wireless Router :: Installing WUSB54GSC Drivers On Windows 7?
Jul 14, 2009Started a fresh installation on windows 7 RC 64 bit popped in adapter, and tried installing disk, disk would get the portion where it asked to input the adapter, then just vanish after i click next. I restarted, nothing. I clicked set up again, says drivers are already installed....though there is no app to show profiles, im guessing it isn't.
[URL]
version 1.00 would work just like the disk. version 2.00 would not start at all and would give an "the application was unable to start correctly (0x0000005).."
Linksys Wireless Router :: WRT160N - Print Spooler Not Working Since Installing?
Oct 28, 2008Since installing my WRT160N my printers have stopped working. All printer drivers have been removed including acrobat and my fax.
Even if I try reinstalling my drivers, I get the following error: Spooler SubSystem App has encountered a problem and needs to close.
Prior to this error my firewall was giving me constant warnings about Pure Networks Admin assistant application trying to access the same files(i.e. nmctxth.exe). Even though I allowed it still kept popping up.
I am using the online armor firewall on a Windows XP system. I cannot access the LinkSys Advisor anymore as it will not start.
Linksys Wireless Router :: E2000 - Installing A Wifi Printer On Local Network
Aug 14, 2012I have a Linksys E2000 router. I am trying to install an Epson NX230 printer on my home network. Apparently, the Epson printer has a MAC address assigned to it. My network cannot find the printer. I looked at my riuter setup and the MAC Address Clone has two buttons, Enabled Disabled. The Disabled button is clicked on. Accdording to documentation I foudn on this website, it looks like I can Enabled the MAC Address clone button. The document also mentgioend entereding the MAC address for a PC.
If I enable the MAC Address Clone, do I enter the MAC address for the printer or during the install process does the MAC address get installed also
Linksys Wireless Router :: E3000 Is Re-flash Simply Downloading And Installing Firmware
Jun 2, 2012I have the latest firmware, have the settings correct (the UPnP is disabled and whatever)
Model number: E3000
Serial number: CVQ01KC13100
Firmware version: 1.0.04 build 6
Operating system: Windows 7 SP 1
Software version: 1.3.11006.1
Connection type (WAN): PPPoE
Went out of town 2 weeks in March, and all through April didn't have any disconnects. Have had this problem since I got it, it gets really bad from time to time (like now). Thought it was my provider for the longest time, but found out if I connect via wired, no disconnects! Is re-flash simply downloading and installing firmware?
Linksys Wireless Router :: Installing WRT54g2 Error - Ethernet Cables Not Connected
Dec 28, 2008I am trying to install my router but I keep getting the error message that my ethernet cables are not connected. I have tried several times and everytime I know that the cables are in correctly. Is there anyway to solve this problem?
I am running in XP and my router is WRT54G2.
Linksys Wireless Router :: WRT160N - Internet Speeds Reduced After Installing Firmware 2.03 Build 9
Jul 28, 2012I own the linksys wrt160n v2...It has latest firmware 2.03 build 9...After installing this firmware i have noticed the internet speeds have reduced,the router requires frequent reboots to make it stable..
i used to have firmware version 2.02 build 15...It was stable unlike the current firmware...i cant find the old firmware anywhere...how do i revert back to old firmware?
All settings are currently at default.
TP-Link Dual-Band Wireless :: TL-WDR4300 - OpenVPN And N750 Is Incompatible?
Apr 30, 2013Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I will never ever buy anything Chinese bricked.
Linksys Wired Router :: RVS4000 - Secure Web Access Without Installing Other Software?
Mar 15, 2011Does it support SSL VPN? As I would like to have secure web access without installing other software.
View 1 Replies View RelatedLinksys Wireless Router :: Can't Log Into E4200
Apr 4, 2012I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers. I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Wan Not Available
Jul 27, 2011Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.
View 2 Replies View RelatedLinksys Wireless Router :: How To Setup E4200 As WAP Only
Jan 5, 2013I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.
Linksys Wireless Router :: E4200 Not Getting IP Address?
Dec 21, 2011I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
Linksys Wireless Router :: E4200 Does Not Have Any Provision To Use MAC ID?
May 13, 2013I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".
View 4 Replies View RelatedLinksys Wireless Router :: Connect E4200 To A Mac Via Afp?
Mar 14, 2011How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies View RelatedLinksys Wireless Router :: Can't Update E4200 V2
Jan 3, 2013Trying to update it to the new smart Wifi but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 V1 Tops Off At 144+450 Not 300+450
Dec 21, 2011I just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:
2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144
5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450
I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.
Linksys Wireless Router :: E4200 And Powerline Not Getting Along?
Jul 10, 2011Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.
View 5 Replies View RelatedLinksys Wireless Router :: Turn Off ULA On E4200 1.0.03?
Oct 8, 2011Firmware 1.0.00 on my E4200 Hardware v1.0 provided a functioning 6to4 tunnel through Comcast's 6to4 facility. Windows and Linux clients on my local network discovered IPv6 addresses and were able to use them successfully.Unfortunately, after the upgrade to 1.0.03 this functionality was gone. I missed reading the ChangeLog, which said that the automatic tunneling feature was removed in 1.0.01. The now provided IPv6 functionality works much less well. First, automatic configuration (discovery of the 6to4 via IPv4 anycast) no longer works with Comcast's gateway. If I configure the tunnel manually, by specifying a 2002/16 prefix, I regain IPv6 connectivity, but only for Linux clients on my local network.
Windows 7 clients suffer from the problem that because the E4200 hands out ULA addresses, they end up preferring those ULA addresses when making global IPv6 connections in the IP 'source' field, which of course does not work. It's like putting your company mailbox code as the return address on a letter you send via US Mail. Other home routers, such as the AVM Fritz! (url,...) suffer from the same problem. However, they provide an option to turn off ULA at the router.Is it possible to turn off ULA for the E4200?
Linksys Wireless Router :: E4200 Can't Log-Out Settings 192.168.1.1
Mar 26, 2012I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..
View 4 Replies View RelatedLinksys Wireless Router :: Use Cisco VPN Through E4200?
Jul 16, 2012I have an E4200 and the Cisco VPN client on my home computer that I use to access a work network. The VPN client cannot connect unless I either (a) bypass the E4200 and connect directly to my cable modem or (b) disable the SPI Firewalls on the router. I have all the VPN passthroughs set to "enable" on the router, but still cannot connect. The VPN client is using IPSEC over TCP on port 10000.
View 5 Replies View RelatedLinksys Wireless Router :: E4200 Cannot Access FTP
Nov 15, 2012I've been trying to get FTP Running up on my router for some time now.
I know my current WAN address and have setup a specified folder on my E4200 for the FTP partition. A username for myself has been created with login info and I have forwarded the port I have specified on my router's FTP configuration page.
I try to log into the server, but whenever I try to log into it, I keep getting a "incorrect login information" message back at me.
If I cancel out of that then I get an error message saying it can't find the specified folder and to check the address of the server.
I know the login information information is correct and I've tried changing the password to others of varying lengths.
I've also tried changing the port I'm running the FTP off of incase my ISP has blocked that port, nothing works.
Linksys Wireless Router :: E3200 Or E4200 - Which One Is Better
Jul 6, 2011I have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200. I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer). I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200.
View 8 Replies View RelatedLinksys Wireless Router :: Only Getting 130 Mbps With E4200?
Dec 28, 2011I bought a Linksy E4200 yesterday and set it up fine, but I only seem to be able to get 130 Mbps on my Wi-Fi. I looked through these threads and tried disabling the 2.4Ghz band and it still remains at 130Mbps. There was no change, also read I can try set up a secondary SSID. I really don't know much about routers or configuring them
View 4 Replies View RelatedLinksys Wireless Router :: USB Support For E4200?
Nov 29, 2011I have a Drobo and am connecting it via the USB port. The Admin Gui is detecting it but only showing 2048.GB capacity its bigger than this is this a limitation? I cannot connect to it via wireless connection/ ie via network. I have also updated firmware to 1.0.03
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Get No Connection At All
Nov 22, 2011My dad recently got a E4200 router, My whole family are mac users, the connection are all okay with their computers, I'm the only one using Microsoft, ASUS running on Vista. The connection is fine when I'm near the router, but when I go to my room I get no connection at all, it connects for a second but then it goes on connection with limited access.
View 5 Replies View RelatedLinksys Wireless Router :: E4200 / Can't Ping WAN IP
Feb 2, 2012I'm using Linksys E4200 router. I can't seem to ping the static WAN IP (from internally or externally). All other connectivity seems to be fine. I can ping the routers internal IP, as well as the cable modem and other external IPs. But all port forwarding through the E4200 is failing.Should the default security/firewall setting allow port forwarding? Or do some settings need to change?
View 2 Replies View RelatedLinksys Wireless Router :: How To Reconfigure E4200
Oct 28, 2012I have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it?
View 9 Replies View Related