Linksys Wireless Router :: Turn Off ULA On E4200 1.0.03?
Oct 8, 2011
Firmware 1.0.00 on my E4200 Hardware v1.0 provided a functioning 6to4 tunnel through Comcast's 6to4 facility. Windows and Linux clients on my local network discovered IPv6 addresses and were able to use them successfully.Unfortunately, after the upgrade to 1.0.03 this functionality was gone. I missed reading the ChangeLog, which said that the automatic tunneling feature was removed in 1.0.01. The now provided IPv6 functionality works much less well. First, automatic configuration (discovery of the 6to4 via IPv4 anycast) no longer works with Comcast's gateway. If I configure the tunnel manually, by specifying a 2002/16 prefix, I regain IPv6 connectivity, but only for Linux clients on my local network.
Windows 7 clients suffer from the problem that because the E4200 hands out ULA addresses, they end up preferring those ULA addresses when making global IPv6 connections in the IP 'source' field, which of course does not work. It's like putting your company mailbox code as the return address on a letter you send via US Mail. Other home routers, such as the AVM Fritz! (url,...) suffer from the same problem. However, they provide an option to turn off ULA at the router.Is it possible to turn off ULA for the E4200?
View 2 Replies
ADVERTISEMENT
Dec 20, 2011
I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost dont work at all with cable, even if i turn off the wireless network, the speed is about 2-3 mbit in and about 6-7 mbit outAll other computers, tv. printer wireless work very fine.
View 1 Replies
View Related
Feb 23, 2012
Can I turn off the wireless network of linksys E4200 and use only the 4 ports? using the router like a 4 port switch?
View 2 Replies
View Related
Jan 12, 2012
turning my wireless back on. Some how in attempting to create a shared file between my pc and my wife's Mac the wireless has been disabled. I have tried resetting the device several times following the instructions on line however I still can not get the wireless to re activate. I tried reverse directions from the posts on how to turn off the wireless but still no luck. I tried restoring the computer to a later date?
View 2 Replies
View Related
Jun 17, 2011
How do I turn off the SIP ALG?
View 1 Replies
View Related
Apr 7, 2012
If the wifi can be turned off on the E1500. I got this unit from a family member and do not need the wifi part, as I have two computers, but are in the same room. I have the cisco connect on my computer and do not see a disable wifi in the program anywhere.
View 1 Replies
View Related
Jul 22, 2012
I have a WRT54G router, and when I am in the security area, where you choose WPA, WEP, etc... I keep clicking the dropdown menu, and when I choose anything BUT disable, the security auto-sets back to disable. I have rebooted the router. I have rebooted the modem. I have changed my router's password.How do I turn my WEP back on without it just saying. Also, for additional notation, my US light on my modem is no longer green, it is orange since this issue has occured. Is there any connection that might be related to this?
View 8 Replies
View Related
Dec 27, 2011
My WRT610n went out today for no apparent reason.All of my other peripherals are still running, but the router won't turn on. I've tried different transformers, outlets and powerstrips, with no luck -- no power. I've also tried a hard reset on it, with no luck.
View 3 Replies
View Related
Jul 3, 2011
How can i turn off/on the wireless in Linksys E3000.
View 1 Replies
View Related
Nov 20, 2012
I just got a Linksys 1200 wireless router and wanted to know how (and the best way) I can turn it off (besides unplugging it) when I am out of town?
View 3 Replies
View Related
Jul 3, 2011
How do I turn on jumbo frames on the e3200? I am using 1.0.01 firmware.
View 3 Replies
View Related
Mar 21, 2013
EA3500, I'm using the Smart Wi-Fi interface through a browser. How do I make my router broadcast the SSID? I think it was when I was setting up using the old interface, before updating the firmware, that I set it to *not* broadcast the network name. Now I feel like I've been all through the menus twice on the Smart Wi-Fi interface, and can't find the on/off toggle.
View 9 Replies
View Related
Jul 10, 2011
I recently switched my router from an older Linksys WRT 54GS to an E3000. The WRT 54GS was working perfectly fine, but I needed to upgrade to a 802.11n router to use with some of my devices at home. I unplugged all the cables from the WRT54GS, and connected all the cables into the E3000 - in the exact same sockets and order they were on the old router. When powering on, all the lights eventually turned on (Power, Internet and Ports 1 to 4), except the wifi is still off. I tried running the installation CD, but it says it cannot find the network. I tried a reset (back button) as well as 30-30-30 reset, but no matter what I do, the wifi indicator still doesn't turn on. When switching back to the old router, it has no problem broadcasting a wifi signal again. Is there anything else I should try, either on my PC settings or the E3000 router itself?
View 5 Replies
View Related
Oct 9, 2012
I just set up my new Linksys 3200 router and wanted to know if i should turn SSID boradcasting feature off?
View 2 Replies
View Related
Jan 17, 2013
when i bought the router, the function worked fine, even before my first firmware upgrade. Can CISCO fix this? I tried everything...power off, reboot, etc...that stupid button is not working....
if something as simple doesn't work, what's next on this router to break?
View 1 Replies
View Related
Sep 1, 2011
I've been having trouble with my wrt54gs2 and 4 360's. I tried a link someone posted for me to a cisco tutorial, it worked, but only for one 360. I have a Netgear wndr3400, I HATE the wireless on that router. Its unreliable but I like the features, the guest network and transfer meter, plus its worked with 4 360's out of the box. So would it be possible to turn off my wifi on the Netgear and plug the wrt54gs2 in and use its wireless?
View 7 Replies
View Related
Aug 28, 2012
I have a Linksys WRT120N wireless router. I am currently only using wired connections to the router. I recently bought a Nexus 7 tablet computer and would like to connect to the Internet wirelessly. How do I turn on the wirelss capability of my router securely?
View 3 Replies
View Related
Jun 30, 2011
I have the cisco WAG120N router. In order to avoid constant radiation I would like to be able to connect my computer and router using an ethernet cable and if possible disconnect and use it wireless when I need more than one computers or netbooks to be connected to the internet. I tried to connect my computer with the router using an ethernet cable but I realized that I continued to have the wireless network on.
View 2 Replies
View Related
Aug 14, 2011
I have WRT120N, i recently updated the firmware. 1.0.06. only my bad is i done it wireless. so its basically interrupted.I have tried, hard reset and power cycle and reinstall the firmware but still the problem occurs, this time its wired.it happens intermittently. i have tried pressing reset upon turn on and reinstall firmware on the bootloader. it stablized for a while but then disconnects and blinking stikes again.
View 2 Replies
View Related
Jun 26, 2012
I tried to log in into my EA4500 today, and instead of the simple window that asks for the user name and password, I am getting a Cisco Connect Cloud log in screen. It is very strange.
At the top it says: Cisco Connect Cloud/Powering Linksys Products
and below that:
Sign In If you have not yet created an account, click the 'Create Account' button in the upper right corner of the page
There is a help button, a button to create an account. There is a place where I can enter an email address and a password.
Pressing the Help button I learned that I can probably bypass this silly screen by disconnecting the internet. Is there a better way to bypass this screen and turn off Cisco Connect Cloud?
View 9 Replies
View Related
Jul 19, 2011
My E2500 is running firmware 1.0.01 build 3.Is there a way to turn off the wireless with this router? I've checked in Advanced Settings via Cisco Connect, and if it's there, I have missed it.
View 3 Replies
View Related
Jul 7, 2011
I have an old linksys BEFW11S4 router which I wanted to turn it as a repeater to increase the signal of my home network but I am not sure of the configuration and set up.
View 1 Replies
View Related
Apr 4, 2012
I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers. I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.
View 2 Replies
View Related
Jul 27, 2011
Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.
View 2 Replies
View Related
Jan 11, 2012
I have an issue with my router that disconnects from the internet in variuos situation when my laptop (an hp pavillion dv6) try to connect. It happen everytime when the laptop go in standby. When i turn it on from standby, the router disconnects from the net and the only way to have access to internet again is turn off and then on the router. It happens also when i turn on the laptop if there is yet some other device connected, like my desktop or my iphone or whatever.
Sometimes i have the same problem with my brand new tablet (a sony s) in a slightly different way. I navigate then, after a random amount of time, the router disconnects in the same way and the only way to have back connection is turn off and then on the router.
View 2 Replies
View Related
Jan 5, 2013
I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.
View 1 Replies
View Related
Dec 21, 2011
I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
View 1 Replies
View Related
May 13, 2013
I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".
View 4 Replies
View Related
Mar 14, 2011
How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies
View Related
Jan 3, 2013
Trying to update it to the new smart Wifi but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing.
View 3 Replies
View Related
Dec 21, 2011
I just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:
2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144
5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450
I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.
View 9 Replies
View Related
Jul 10, 2011
Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.
View 5 Replies
View Related
Mar 26, 2012
I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..
View 4 Replies
View Related
