Using PPTP Or OpenVPN Encrypt Entire Connection To Internet?
Jul 15, 2012If i use PPTP or OpenVPN does this encrypt my entire connection to the internet or just web browsing?
View 7 RepliesIf i use PPTP or OpenVPN does this encrypt my entire connection to the internet or just web browsing?
View 7 RepliesWhenever i open any web page. just before its address at address bar shows a symbol which says " This website does not supply Identity Information. Your connection to this website is not encrypted
View 1 Replies View RelatedI am running win xp and I am very intrested in encrypting my internet connection using exp.8 and firefox 4. what do i have to do to get the ball rolli ng?
View 1 Replies View Relatedrecently I've connected to my OpenVPN and everything works fine on my PC I'm getting okay speeds and the VPN IP appears on [URL]The problem is I wanna use internet connection sharing to play Xbox Live while connected through my VPN and I'm having issues.My Xbox isn't even recognizing my wired connection.This is the setup:Wireless Connection > Desktop > OpenVPN > Wired connection from desktop to XboxWhat I think I'm doing wrong is not specifying the correct home networking connection for my LAN 3 (Tap-Win32 Adapter OAS)I tried sharing the LAN 3 connection and set the home networking connection to my Wireless and it disconnects me from my wireless network.
View 1 Replies View RelatedI have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.
View 2 Replies View Relatedif its possible to set a maximum bandwidth for the entire wlan or for entire Vlan in the WLC 5508 ?
View 3 Replies View RelatedI can't open www.tv3.lt, because is writen, that CONNECTION IS NOT ENCRYPTED. Al the time it was OK. What the matter.
View 1 Replies View RelatedWhen I try to connect OpenVPN through an E4200 v2 router from my Linux Fedora 16 client, the connection hangs. The connection log show that OpenVPN has connected to the VPN server. Internet also freezes until I disconnect OpenVPN.
OpenVPN on Windows works fine through the E4200 router.If I connect the Linux client directly to my Inteno fiber router, OpenVPN works fine.Passthrough is enabled in the router, and I have configured QoS and port forwarding for port 1194. The router has firmware version 2.0.37.
Shortly after creating a VPN connection on one of the computers, the network is turned off. The router remains powered on but no internet access or access between computers is possible. At first we put it to coincidence but after 3 times, we can't figure out what is happening.
View 1 Replies View RelatedAfter recently setting up a new computer, my entire network seems to randomly loose internet connection. The interval between connection losses is as short as half an hour but it sometimes goes several hours without dying; the connections is lost for anywhere between 30 seconds and 20 minutes each time it dies.The new computer is running Windows 7 and is using a Roeswill USB wireless adapter, but I have tired it with a wire and the connection still dies. I am disinclined to believe that this is caused by a virus simply because this is a brand new computer that has had only minimal use; to be on the safe side, though, I did do virus scans with multiple programs, however, I did not find anything.When the connection is lost, a yellow exclamation appears on the task bar's internet access icon. If I check my available networks, my network still shows full strength. I have tried disconnecting and reconnecting but nothing happens; I don't get any "failure to connect" type errors nor do I get connection back. I have also tried physically removing the adapter/wire and plugging it back in, but that doesn't do anything either.
I am under the impression that the new Windows 7 computer is doing something to temporarily kill the entire network, but I don't know what.For the record, my modem is an old Motorola and my router is an old Netgear. Both are quite a few years old, but I don't think they are the problem as my internet was fine before I added the new Windows 7 computer. There are wired computers and wireless computers running XP, Vista, and 7 also on the network.
I have 2 computers on a network, and 3 devices that use wifi on the same network. Basically when ever computer A is connected, every single computer or device on the network runs extremely slow, if at all. I get anywhere between 1200-2000 ping on pingtest with 2-60% packet loss. Even the speed on the "infected" computer A downloads extremely slow. I'm at a loss for this problem, everything runs slow and its because of the one computer connected to it. I have virus software on this computer, but its not the best so i'm not ruling out malware or viruses right off the bat.
Devices: Blackberry, Iphone, macbook (all wifi)
Computer A
Runs windows xp 32 bit,
amd processor
onboard video
[code].....
The internet modem runs to a router (Dlink dir615) then to a switch (or hub, if you will) and then to the 2 computers. The entire problem is solved by unplugging computer A from the system. But other than that I have no alternative.
Can I configure a PIX (515), as PPTP client to establish a tunnel with non-Cisco PPTP server ? Can my PIX initiate this type of connection ?Today, I use a PC with PPTP client to establish this and I want replace this with a PIX and I don´t want depends of a PC.
View 5 Replies View Relatedan RVS4000 shall establish a pptp VPN connection. The router is connected trough its WAN port to the first router which connects to the internet.
The PPTP VPN connection cannot be established but the pptp server can be pinged from the VPN router. Login data and password is OK. Connection can be established from a win7 computer without any problem.
We have a Cisco 891 with this configuration belowI got several computer on my lan that needs to connect to an external Windows server with pptp. The windows server is not mine but it works. The clients are using the windows connection manager. We can connect to the windows pptp server for hours sometimes.But, sometimes we can just connect about 3-4-5 minutes, and it auto-disconnects. Is there something wrong in my configuration ? I heard the cisco router is messing with the keepalive or the connection state.It seems to happens when i have more than 5-6 clients connected at the same time on the same server. I got theses mesages : Link to VPN failed. OR ERROR 619 OR ERROR 651Before, I had a RV042 and it worked like a charm. We were 10 on the vpn server and it was working. I dont see why Its not working now.
version 15.0no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryptionservice sequence-numbers!hostname Quantis891!boot-start-markerboot-end-marker!!aaa new-model!!aaa authentication login local_authen localaaa authorization exec local_author local !!!!!aaa session-id common!!!clock timezone PCTime -5clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00!!!no ip source-route!!ip dhcp excluded-address 10.10.10.1ip dhcp excluded-address 10.1.1.201 10.1.1.254!
[Code] .....
I am having problem when try to connect through VPN from MacOS to my RV016 router.The situation is like this. I can connect to the router,the connection is succesfull, but when I try access resources inside the network it disconnects me.The message is "You are dissconnected by the PPTP Server". I encountered this problem on MacOS Snow Leopard and Lion. I tried to connect from 3 different Apple machines, but the problem is the same.
View 1 Replies View RelatedI've got trouble using PPTP connections with the RV220W small business router.When trying to connect to the router of a branch office with the Windows PPTP client (i.e. on Windows 7) from outside the companies network first everything seems to be in working order (user name and password are checked, the device is registered in the remote subnet) but then a window pops up saying there has been an error connecting.
Here is some information on my setup:RV220W with firmware 1.0.3.5It connects to the Internet using PPPoE dialindyndns account configured and workingAnother router working in "Act as a DSL modem" mode is used as a modem (AVM FRITZ!Box 7170)The RV220W is maintaining a IPSec tunnel to a main office, which is working finethere are 2 local VLANs (one with access to VPN tunnel, one without), each with a own subnet (192.168.201.0/24 and 192.168.202.0/24)PPTP users are on a seperate subnet (192.168.203.101 - 192.168.203.111) My first guess was, that the intermediate router acting as the modem could be a problem, but i verified all settings on that router and it should not filter anything. After all port forwardings, the IPSec tunnel and so on are working.
Does RV082 can establish PPTP VPN connection as CLIENT? (i'm aware it can provide function of VPN PPTP server but could not find if it can act as client).To explain further: I'm based in Europe and use US VPN to access some US services like Netflix, Pandora, etc.. (i'm paying for US VPN account as service so I have no other choice than PPTP). I would like to establish permanent PPTP VPN tunnel with remote server so all computers in the house can go through tunnel when i browse for Pandora or Netflix for example (is this router capable of routing policy too so not all the traffic would be routed through tunnel?)
View 1 Replies View RelatedI am working with a RV180w and need to map drives from the internal network to the VPN client but whenever I try to connect to a shared drive I continue to get authentication messages from the DC. Any useful guide for configuration in this scenario. Internal subnet is on Windows 2008 domain.
View 1 Replies View Relatedi'm having problems connecting to my RV220W using PPTP. The first time I set up PPTP on the box, everything worked just fine. Now, however, PPTP just won't work. No matter how I try to tweak various settings on the router, the connection fails. I have tried connecting with Windows 7, Android and OSX with no success.The router came with version 1.0.1.0, and I have tried downgrading to 1.0.0.26 and upgrading to 1.0.3.5, but alas, I can't seem to make PPTP work again.
View 1 Replies View RelatedMy network consists of the following:
Office-RV042 with static IP ->SBS2003 (10.10.10.5/ 255.255.255.0)
Remote: BEFSR41 with Dynamic -> XP sp3 VPN client (192.168.3.x/ 255.255.255.248)
Within the RV042 I have enabled the PPtP server and assigned a user. No port forwarding enabled. All VPN passthroughs and firewall is enabled. DHCP server is disabled.I can establish a connection to the rv042 and ping PCs including the sbs domain server on the office side but am unable to browse any folders. When I attempt to access a network folder located on the office server I am prompted for a username/ password. Upon entering my domain credentials I get an error stating: "the user name you typed is the same user name you logged in with. That user name has already been tried. A domain controller cannot be found to verify that user name"
I am using a pptp server running on windows 2008 server and I have configured my ASA 5520 to let the PPTP traffic to pass throught.
The solution works quite well but exactly every 120 minutes the connection drops and people have to reconnect. Is there any setting to change? In the PPTP server I haven't found any setting to change.
I am trying to set up a PPTP VPN connection which also provides internet access. I have the following configuration. The router named "Router1" connects 2 computers PC1 and PC2 on the LAN side with a network address of 192.168.1.0/24. It is a PPTP server and a DHCP server. It gives IP addresses to PC1 and PC2. It has a static address of 192.169.1.2 on the LAN side and a static address of 10.2.9.1 on the WAN Side. PC3 has a static address of 10.2.9.2 and is connected to the WAN port of Router1. "Router2" is connected to the LAN side of Router1 and it has a static IP of 192.168.1.1. Router2 is connected to the internet and provides internet connection to PC1 and PC2. PC1 and PC2 connects fine to the internet and can see each other. However, PC3 cannot connect to the internet even though it is connected to Router1 by PPTP VPN connection. PC3 can see PC1, PC2, Router1 and Router2 but it cannot connect to the internet because Router1 does not give it the default gateway(192.168.1.1) to connect it. When PC3 connects via PPTP, It receives a correct IP address(10.2.9.3), correct DNS addresses but the ip4 default gateway field is left blank, and the DHCP option is not enabled on connection properties of PC3. Router1 is a DD-WRT firmware router (DLink Dir 400) and has PPTP server enabled as a service. How do I get Router 1 to give PC3 a default gateway IP? And how do I forward all outgoing packets from Router 1 to Router 2? I do not need port forwarding for some ports, I need full access to the internet from PC3 though the PPTP connection via Router2.
View 3 Replies View RelatedI am trying to set up a PPTP VPN connection which also provides internet access. I have the following configuration. The router named "Router1" connects 2 computers PC1 and PC2 on the LAN side with a network address of 192.168.1.0/24. It is a PPTP server and a DHCP server. It gives IP addresses to PC1 and PC2. It has a static address of 192.169.1.2 on the LAN side and a static address of 10.2.9.1 on the WAN Side. PC3 has a static address of 10.2.9.2 and is connected to the WAN port of Router1. "Router2" is connected to the LAN side of Router1 and it has a static IP of 192.168.1.1. Router2 is connected to the internet and provides internet connection to PC1 and PC2. PC1 and PC2 connects fine to the internet and can see each other. However, PC3 cannot connect to the internet even though it is connected to Router1 by PPTP VPN connection. PC3 can see PC1, PC2, Router1 and Router2 but it cannot connect to the internet because Router1 does not give it the default gateway(192.168.1.1) to connect it.
When PC3 connects via PPTP, It receives a correct IP address(10.2.9.3), correct DNS addresses but the ip4 default gateway field is left blank, and the DHCP option is not enabled on connection properties of PC3. Router1 is a DD-WRT firmware router (DLink Dir 400) and has PPTP server enabled as a service. How do I get Router 1 to give PC3 a default gateway IP? And how do I forward all outgoing packets from Router 1 to Router 2? I do not need portforwarding for some ports, I need full access to the internet from PC3 though the PPTP connection via Router2
When my ea4500 is connected to other router with internet connection I can access CCC. But if ea4500 connected via pptp to internet by itself, i cannot use CCC because router tells 'no internet connection', even if I have this connection. How to fix it?
View 9 Replies View RelatedI currently have a RV220W connected over PPTP to the internet. I want to connect with an RV042 with a fixed IP Address.The connection is working, but I always have to add a static route to the remote IP-Adress that I can transmit data.Since my own IP Adress is a dynamic one that changes every day I have to enter every day in the static route as gateway adress the new WAN IP Address.
View 4 Replies View RelatedI'm trying to connect to a VPN using the free OpenVPN software. This has been working for a while, but recently I keep getting the following error. My OpenVPN config file is also copied in below. I've tried searching for a fix but haven't managed to find anything.
Code...
I've got an office network that I would like to add a NAS drive to in a Windows 7 environment.
However, I want to make sure the NAS is both encrypted and password protected on the network to make sure someone doesn't just walk off with our company data (by taking the whole NAS with un-encryped info) or logging on through our network.
What would be your recommendation for a NAS setup that would offer total data encryption, great security from non-authorized people on the network, and 100% Windows 7 compatibility?
I want to say that I am new to networking and VPNs, but I have really enjoyed setting up my own OVPN server and learning along the way. The impetus for my investigation in OVPN came from my desire to route my internet traffic through my home network while being at school and to have access to my home networked printer and NAS. I decided to go with a bridged OVPN setup on my NAS. I successfully bridged my NAS LAN adapter with the OVPN TAP driver, deployed the server on my NAS, and have had great success accessing my NAS, printer, and LAN remotely. Note that I use Windows 7 on all of my devices. Everything works well and I can just about max out my home ISP download/upload speed when transferring files over the VPN.
However, I noticed that after deploying the OVPN server my local transfer speeds over my LAN to my NAS are greatly reduced. After several days of trouble shooting I have narrowed the problem to the bridging of the OVPN TAP Device with my NAS LAN adapter. [code]
Is is possible to run Transmission or Google Chrome only using OpenVPN? Other applications should use default connection (eth0) since I am connected to Intranet which won't be accessible if all traffic is routed through VPN. I am using Ubuntu 12.10 and some Premium VPN server (similar to HMS VPN)
View 1 Replies View RelatedI`m looking to have a play with VPN, but as my original plans to install PFSense onto a SuperMicro 5015a-EHF system are on hold due to availablility/Pricing issues, I`m lookin at doing it with my current IPCop.
Mooching around I find Zerina but after getting throught to the SSH directory and unpacking bit, it turns out zerina only supports ipcop up to 1.4.early version!
Further digging around gets me onto openVPN so I go down the same route but with no easily available walkthrough/howto I quickly found myself struggling and discovered the ipcop forums which, from what I have read, have to be the single most unfriendly forum I have ever discovered. How to get VPN set up on my IPCop?
I have 2691 Router conencted to Internet and it is doing Nat.
This connects to 3550A Switch which has connection to 1811W Router.
I setup VPN between 1811W and 3550A.
3550A has connection to 2691 via ospf.
OSPF is running between 1811w and 3550A.
1811
1811w# sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
[Code]....
I am setting up an offsite storage server for work at my home which will sync a few times a day to grab data and i wanted to ask about options for encryption or if i should worry about it.i am going to be initially dumping about 1-1.5T worth of data, with then maybe a couple of gigs a day added of new stuff.i am going to use server 2008 r2 as i am also doing a read only DC/AD for this system to give me and offsite controller just incase also.
I was thinking encryption for one more level of safety just incase something happened to the server, like theft or something but not sure what could reliably handle that much data ? System is only a dual core e7500 with 8G of ram, i have 2x500G SATA in raid 1 for the OS and 4 x 1T drives in raid 6 with 2 more coming.
I have a problem in my IPSec tunnel. One of the routers (Cisco 861) doesn't encrypt the packets but does decrypt the incoming ones from the remote peer (RV042). In the access-list for the wan interface I deny the traffic between the subnets and in the vpn access-list I permit the traffic.
View 4 Replies View Related