Wireless Router To Multiple LAN Computers Setup?
May 9, 2012I have one wireless router, 2 computers, 3 wifi laptops. so i want connect these all things in network.
View 1 Replies
ADVERTISEMENT
How To Connect Wireless Router With Multiple Computers
Jun 11, 2011I have been searching the net for a hub of some sort for a home office. I need it to be able to support printers. It needs to be a wireless router and have a data storage which can be accessed by multiple computers. Like a backup. But the main thing im worried about is if it can be protected by antivirus and stuff.
View 1 Replies View RelatedAccess Multiple Computers Behind Router?
Jun 21, 2011I have few computers behind the wireless router. All the computers have static private addresses 198.168.1.xxx. The issue is that when I try to access any computer e.g to use FTP. From outside since I can only use the main WAN IP address when I use FTP I can only connect to one computer basically the one running FTP service on port 21. I can access the wireless router and if necessary can do the port assignments. My question is that if multiple computers are running FTP services behind the router how can I connect to each one of them.
View 1 Replies View RelatedSetup A Network With 100 Computers Along With Router?
Oct 29, 2011i want to enquire how we can setup a network with 100 computer along with router, firewall, print server, file server. diagram of network to understand the things.
View 1 Replies View RelatedInternet Access Using Multiple Computers On Private Wireless Network
Apr 2, 2012the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies View RelatedThree Computers - Internet Modem And Router Setup
Jul 14, 2011We have three laptops in our house. We are set up with internet that gives me a direct connect and up to eight wireless devices. My son and daughter-in-law use the wireless and I use the direct connect. M son added a router (which I have no idea what that does) and set up networking on his computer (which I also have no idea what that does). When I am the only one on the computer, it flys. When either of them get on thiers too, it slowes a little. When both of them get on, I might as well get off because it can take up to three and a half minutes to load a page.
View 3 Replies View RelatedHow To Setup Multiple Networks On One Router
Aug 3, 2011How do you setup multiple networks on one router? Is it as easy as changing subnets?
View 8 Replies View RelatedAdvanced Security Options For Wireless Setup (45 Computers)
Jul 25, 2011Our company is moving to a new location temporarily and we will be looking to do wireless for our network instead of wired. We have a dell power edge 2900 server running windows SBS 2008 and a switch with more than enough ports for what we need.What i need to know is how exactly to do the wireless and what hardware would work best for us. We plan to have approximately 45 computers hooked into the server and have some wired but for the most part wireless. Also we would want to look into advanced security options for our wireless set up as we will be in the same building as a few other companies.
View 5 Replies View RelatedMultiple Computers With Same IP?
Jul 21, 2011I have 4 computer, all with them IP address. There is nothing I can do about this. I'd like to access them each via a 5th computer. Originally I thought I can connect each of the 4 computers to 4 different routers and then use NAT to convert their IP address's to 4 unique ones. When I actually applied this solution, the 5th computer was not able to ping the converted IP address. This method either does not work, or I did not config the router correctly. I was using a Cisco RV016 out of the box, and added NAT entries into it's table.
View 7 Replies View RelatedRouters / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?
Jan 29, 2011I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View RelatedConnecting Multiple Computers Through Different Networks?
Jan 11, 2012I have 3 Macs (OS 10.6.8) and one PC (Windows 7) at work. They are all connected to the company network for internet and access to shared network drives.The computers are used for media (mostly video) production and we need to move large files between the computers easily and quickly. The current network (company wide) is slow and unreliable, so I would like to create a separate network for these four computers and have them connected to both the company network and the office room network. Each computer already has two network ports and I have a router I can use.
View 3 Replies View RelatedCan't Connect To A Certain Website On Multiple Computers
Oct 13, 2012I can't connect to one website. Not on my computer, not on my father's computer. I think the network is the problem, which is why I'm posting here. The website was working even yesterday but during yesterday evening, it stopped working and it's been like that since. I don't know how to fix it. My command prompt says my server can't find that one website and says my server failed. I tried other things like scan my computer, restart it, look at my Chrome settings, my firewall settings, nothing worked. I'm not sure what's going on here, because the network is private, and the contact information for 2Wire/Pace was useless for me, so I don't know what to do.
View 3 Replies View RelatedHow To Print On One Printer Using Multiple Computers
Feb 20, 2013How to print in one printer using multiple computer?
View 1 Replies View RelatedLogin To Multiple Computers With Single One?
Jul 22, 2012I currently have mutiple computers at my place. Once the computer turned on i want the option of which login for the current computer to use, it can login it current computer or the mutiples computer with their content/data all inside. So more like an computer linked. Example, it can only to A or B, A is the current computer data, while B have all the data of the different computer monitor datas, and if i login B it will show that current computer info. And same goes to the B computer, i can login to A or B on the B computer. What makes this very good is that, both the computer logins are sort of connected, for example if im on actual computer A, but logined to computer B and downloaded/changed some files/data on the B login, once i login on computer B to login B, the changes will apply even tho the changes are done in computer A.
View 1 Replies View RelatedSetup Multiple Wireless Routers?
Apr 5, 2013 I was actually looking forward to setup multiple routers at our college(I know its quite late) where we have quite a good network of ethernet cables. Also, almost every cluster/lab has its own switch and we use static IPs with proxy to one network address(192.168.130.2). The user should be able to travel across multiple ROUTER/AP zones without changing connections.
all I got was I have to do something with MAC cloning and SSIDs.
Setting Multiple Computers To Run One Teamspeak Server?
Dec 11, 2012My friends and I want to set up a better Teamspeak 3 server but Don't want to spend the money to rent one. We currently have a friend who runs the server on his computer but it is unreliable. We are wondering if we could have multiple computers support one server. So that if one computer fails the server would still get supported by other computers that are supporting the server. Also what would be some recommended hardware stats to run this server.
So I'm asking, can we have multiple computers support a single Teamspeak 3 server?
Multiple Wireless Access Point Setup?
Feb 13, 2011I need to setup my laptop for two different wireless configurations,at home i have a wireless network that work fine, however, at work i need to configure TCP/IPv4 by feeding in the required IP, Subnet Mask, Gateway etc. But i have to repeat this everyday in office and at home by removing and feeding in the parameters. Is there anyway that i can have both configurations and the system just automatically finds the right wireless network without changing the parameters. I am using windows 7.
View 4 Replies View RelatedZyxel Pk5000z - Port Forwarding For Multiple Computers On Same LAN?
Jun 15, 2012I don't know if I'm saying this right but, I have two computers in my LAN hooked up by a Ethernet cables to my modem/router zyxel pk5000z we were using theses computers to play together using Game Ranger. We were having some problems connecting to game rooms with a symmetric NAT. When the port forwarding did work it would only let me open ports for one ip adress for 1 computer it seemed. How do you open ports for all computers on your LAN?
View 1 Replies View RelatedD-link Dir-601 :: Unable To Send Wifi To Multiple Computers
Feb 9, 2012I have a Mac, and my wife has a PC running Windows 7. Since we moved into our new house, our Dlink DIR-601 does not seem to want to send Wi-Fi to both computers at the same time. One of the computers always seems to lag or not have internet connection at all. The Mac also seems to work better and more often than the PC when both are trying to access wi-fi.
I have messed with the channel settings, security, and most other typical settings on the router to no avail. Is there a setting I'm missing or should I enable certain settings that will allow both computers to have the same signal strength and reliability.
Cisco Switches :: SG300-10 / Setup Multiple Routed VLANs Going Back To FiOS Actiontec Router
Aug 13, 2011I just received a new Cisco SG300-10 and am configuring it in Layer 3 mode. I am trying to setup multiple routed VLANs going back to a FiOS Actiontec router. My configuration is as follows.
Fios Router: 192.168.1.1
Assigning DHCP 192.168.1.2 through 100.
SG300-10 has VLan 1 ip 192.168.1.5 used for Mgmt.
VLAN2 is 10.0.2.1
VLAN3 is 10.0.3.1.
I have a static route set on the fios router for both subnets setup as follows.
Destination 10.0.3.0 Gateway 192.168.1.5 Netmask 255.255.255.0 Metric 1
Destination 10.0.2.0 Gateway 192.168.1.5 Netmask 255.255.255.0 Metric 1
I have a laptop connected to Gi8 on the Cisco (Vlan 3) and statically assigned 10.0.3.3, with a gateway of 10.0.3.1. DNS set to the fios router (192.168.1.1).
Everything pretty much works EXCEPT, I cannot get out to the internet from either vlan. Traffic routes between vlans/and the default subnet on the fios without issue.
When I ping out, DNS resolves, but will not go past the fios router. Am I missing a setting somewhere?
Setup 2 Computers To Communicate With Each Other?
Sep 30, 2011How do I set up to computers to contaminate with each other in the same room
View 1 Replies View RelatedSetup A Hard Wired Network For 30 Computers?
Jan 28, 2013I want to setup a hard wired network for 30 computers
View 1 Replies View RelatedBusiness Network Setup -restrict Access To Some Of The Computers?
Jun 26, 2012I have a client who has asked me to "optimize" their network.They currently have a few shared folders that everyone can see, but what they want is to restrict access to some of the computers on the network.More specific,they don't want the receptionist and the backroom workers to have access to those shared folders while the rest of the employees (the bosses) do have access to those folders.They have 2 computers with Windows 7, 2 computers with Windows XP, and a mac.
View 4 Replies View RelatedTwo Internet Connection (same ISP) To A Single LAN (8 Computers With Server Setup)
Aug 9, 2012I have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.
View 5 Replies View RelatedSetup A Wired Network Between Computers But Leave The Wifi On Them?
May 5, 2011I'm sort of new to networks so I'm not sure if this is even possible but what I'm trying to do is set up a wired network between computers but leave the wifi on the computer as how it connects to the internet. I'm using two computers connected through a lynksys router(not connected to the internet) and ethernet cable, and one of the computers has a wireless card that connects to another router that is connected to the internet. i can set up a network between the two computers but then the one can't connect to the internet(even though it says it is connected the network with internet),
View 2 Replies View RelatedHome Network :: Setup A Remote Desktop Connection For 3 Computers?
Apr 28, 2011i want to setup a remote desktop connection for 3 computers on the same network to connect to remotely. Originally i was going to port forward the original windows RDP port and run the windows rdp service but learnt that XP Home Edition doesn't support this feature. I want to be able to log onto these computers at any time remotely with the need of accessing the computer before i connect.
View 2 Replies View RelatedSetup Multiple Networks On One Rv042?
May 19, 2012We have 36 cctv cameras slowing down our oracle network pc's all in same subnet. I want to remove the dvr's of cctv to a separate network to improve performance. How to accomplish that with a Rv042 linksys router? Or is there any other better way around. 5 Users access the cctv cameras all the time.
View 2 Replies View RelatedSetup Multiple ISP's For Redundancy And Persistence?
Feb 6, 2013getting a secondary isp as back-up and redundancy...and work arounds for ddos's....I just thought that i could use a switch/bridgeable router that can act as a switch... and run that off the first in line off the #1 isp router. Instead of connecting the second into the isp port, i should be able to put the #2 isp line into that. and put #1 ethercable into one of the outgoing ports from the second. And keep all the pc's on the #1 as is....But it should still use both providers simultaniously...right? I have 3 or more routers that can do this, and i have used them like this and shared several pc's internet's other then the primary ISP. But it was shared through the pc. and separate NICS or wifi AP's. I currently have one that will autosense a gig, and have bought another router that can operate at a gig that i plan to put into the #1 position as it's the fastest one. And will keep 1 gig without variability. and also give me wifi n 450-700. And they both support bridgeing,repeating and network balanceing /shareing. This should be possible and i won't have to spend $4,000 on a router with 2 ISP ports, and only uses it as fail-over....=c this should use both simulataniously and balance workloads between each.
View 2 Replies View RelatedRouters / Switches :: Setup Multiple Public IP's?
Apr 7, 2011At my company, we lease 3 static public IP addresses from 1 ISP. We want to have 3 separate networks that each use one of the IP addresses. Network 1 is the computer network, network 2 is the VOIP network, and network 3 is the security camera network. I am trying to determine the best way to do this. I have come up with 2 solutions in my head, but I'm not sure if they will work or not. I would like to get some input. Solution 1:Solution 1 looks something like this. Fiber box -> Router-> 3 switches. There would be one WAN input on the router, that would have a static route to 3 different LAN ports. For example, address 24.244.208.101 would be assigned to LAN port 1, 24.244.208.102 would be assigned to LAN port 2, and 24.244.208.103 would be assigned to LAN port 3 (by assigned, I mean have a static route to it). Is there some type of router that is capable of doing this? Solution 2:Solution 2 looks something like this. Fiber box -> Switch -> 3 Routers. The ethernet cable would run from the Fiber Box to a switch, and then 3 routers would be plugged into the switch. Each router would have the Static information configured in them. Would both of these methods work? If so, which would be the best way to go?
View 2 Replies View RelatedSetup Tcpdump To Save To Multiple Files?
Sep 29, 2011I have the following batch script which works except I cannot get the -W incrementing file flag to work. Everytime I run the script tcpdump will capture the traffic on my network but will overwrite the file each time. I just need it to write a new file with a sequence of file01, file02, file03?
@echo off
tcpdump -s 96 -c 50 -C 20 -W 50 -n -q -w tcpdumpbatchfile.dmp
exit
rem -s size
[code]....
Route Connections For Multiple NICs Setup?
Feb 27, 2013I have the setup as following on my PC:
[code]...
I use the fibre internet for almost all internet activities since the speed is fast.However, when I do school's stuff, I need to VNC to my lab's server. Hence I need to connect to school internet point. External IP cannot directly connects to my school's server.Therefore, I would need to force Windows (or VNC) to use the connection of the Wireless Ethernet card when I VNC to my lab's server. But I want to use my fibre for all other internet activities.
How To Setup Multiple Ethernet Connections In Windows 7
Jul 16, 2011I have to connect/switch to two different ips different gateways, can I possibly keep two set of ips always ready.
View 1 Replies View RelatedMultiple Monitors Media Pc Networking Setup?
Jul 25, 2012So I'm building a house... in the living room there will be one server-like computer. This computer will also work with a NAS. So there will plenty of storage to place pictures and movies etc etc.Every room in the house will have a coax cable and CAT6. What I want is for fast file access to the server all computers in all rooms can use the CAT6 cable. That isn't the issue, because i will use network dives and mapping.e're planning on putting a TV in every room, so we want to perfect our media setup. But how can i make it, that the server will be able to stream different movies to different TV'S at the same time? The TV'S can get the video feed via coax? Or should I pull one more cable to all the rooms?So how can i have it that the media can be accessed at the same time? I can duplicate the monitors, but is it possible to have the server/computer play 2 or more different movies to different TV'S at once?
View 1 Replies View Related
