Access Multiple Computers Behind Router?
Jun 21, 2011
I have few computers behind the wireless router. All the computers have static private addresses 198.168.1.xxx. The issue is that when I try to access any computer e.g to use FTP. From outside since I can only use the main WAN IP address when I use FTP I can only connect to one computer basically the one running FTP service on port 21. I can access the wireless router and if necessary can do the port assignments. My question is that if multiple computers are running FTP services behind the router how can I connect to each one of them.
View 1 Replies
ADVERTISEMENT
Apr 2, 2012
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies
View Related
Jun 11, 2011
I have been searching the net for a hub of some sort for a home office. I need it to be able to support printers. It needs to be a wireless router and have a data storage which can be accessed by multiple computers. Like a backup. But the main thing im worried about is if it can be protected by antivirus and stuff.
View 1 Replies
View Related
May 9, 2012
I have one wireless router, 2 computers, 3 wifi laptops. so i want connect these all things in network.
View 1 Replies
View Related
Jul 21, 2011
I have 4 computer, all with them IP address. There is nothing I can do about this. I'd like to access them each via a 5th computer. Originally I thought I can connect each of the 4 computers to 4 different routers and then use NAT to convert their IP address's to 4 unique ones. When I actually applied this solution, the 5th computer was not able to ping the converted IP address. This method either does not work, or I did not config the router correctly. I was using a Cisco RV016 out of the box, and added NAT entries into it's table.
View 7 Replies
View Related
Jan 11, 2012
I have 3 Macs (OS 10.6.8) and one PC (Windows 7) at work. They are all connected to the company network for internet and access to shared network drives.The computers are used for media (mostly video) production and we need to move large files between the computers easily and quickly. The current network (company wide) is slow and unreliable, so I would like to create a separate network for these four computers and have them connected to both the company network and the office room network. Each computer already has two network ports and I have a router I can use.
View 3 Replies
View Related
Oct 13, 2012
I can't connect to one website. Not on my computer, not on my father's computer. I think the network is the problem, which is why I'm posting here. The website was working even yesterday but during yesterday evening, it stopped working and it's been like that since. I don't know how to fix it. My command prompt says my server can't find that one website and says my server failed. I tried other things like scan my computer, restart it, look at my Chrome settings, my firewall settings, nothing worked. I'm not sure what's going on here, because the network is private, and the contact information for 2Wire/Pace was useless for me, so I don't know what to do.
View 3 Replies
View Related
Feb 20, 2013
How to print in one printer using multiple computer?
View 1 Replies
View Related
Jul 22, 2012
I currently have mutiple computers at my place. Once the computer turned on i want the option of which login for the current computer to use, it can login it current computer or the mutiples computer with their content/data all inside. So more like an computer linked. Example, it can only to A or B, A is the current computer data, while B have all the data of the different computer monitor datas, and if i login B it will show that current computer info. And same goes to the B computer, i can login to A or B on the B computer. What makes this very good is that, both the computer logins are sort of connected, for example if im on actual computer A, but logined to computer B and downloaded/changed some files/data on the B login, once i login on computer B to login B, the changes will apply even tho the changes are done in computer A.
View 1 Replies
View Related
Dec 11, 2012
My friends and I want to set up a better Teamspeak 3 server but Don't want to spend the money to rent one. We currently have a friend who runs the server on his computer but it is unreliable. We are wondering if we could have multiple computers support one server. So that if one computer fails the server would still get supported by other computers that are supporting the server. Also what would be some recommended hardware stats to run this server.
So I'm asking, can we have multiple computers support a single Teamspeak 3 server?
View 1 Replies
View Related
Jun 15, 2012
I don't know if I'm saying this right but, I have two computers in my LAN hooked up by a Ethernet cables to my modem/router zyxel pk5000z we were using theses computers to play together using Game Ranger. We were having some problems connecting to game rooms with a symmetric NAT. When the port forwarding did work it would only let me open ports for one ip adress for 1 computer it seemed. How do you open ports for all computers on your LAN?
View 1 Replies
View Related
Feb 9, 2012
I have a Mac, and my wife has a PC running Windows 7. Since we moved into our new house, our Dlink DIR-601 does not seem to want to send Wi-Fi to both computers at the same time. One of the computers always seems to lag or not have internet connection at all. The Mac also seems to work better and more often than the PC when both are trying to access wi-fi.
I have messed with the channel settings, security, and most other typical settings on the router to no avail. Is there a setting I'm missing or should I enable certain settings that will allow both computers to have the same signal strength and reliability.
View 5 Replies
View Related
Feb 25, 2011
I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 1 Replies
View Related
Nov 2, 2011
Recently installed an E4200 router to an MacPro following the setup as directed by Cisco Connection (connect Ethernet to router and then computer to router.) The wireless and the hard-wire connectivity works fine with accessing the internet. However, we have lost the ability to connect to other computers on our LAN via the Shared folder connection. This is usually accessed via the Sidebar (see image)
However with the E4200 in the mix, all we see is the router per its "given name" (what it was named on installation). I have tried to follow the advice mentioned in other threads, such as "Can't access network shares with E3000" and nothing worked-- and those threads seemed to apply to Windows and PCs anyway.
View 6 Replies
View Related
Jun 5, 2012
i am not sure if this question has been raised before. My company recently bought a Cisco 1941 router and we have been using a Lynksis router connecting to our ISP using WiMax all along. I have configured the new cisco1941 to the best of my knowledge but something strange is happening on my network. I can open www.gmail.com from any machine but i cant open anything else even www.google.com . What could be causign that ?
My config is as follows :
Current configuration : 4478 bytes
!
!
No configuration change since last restart
version 15.1
[Code].....
View 9 Replies
View Related
Feb 1, 2013
I have a Linksys WRT54GS router that I have installed dd-wrt on.My household is overloaded with wireless devices, and living in a home of 6, speeds for everyone seem to slow down drastically later at night when everyone is simultaneously connected and streaming media -- whether it be Netflix, YouTube, etc.. My typical speed wired to the router with no other connections is around 25 mb/s down and 1-2 mb/s up.Obviously, it's going to slow to a crawl when we have an iPad, 3 iPod touches, an iPhone, a Wii (playing Netflix) and 4 PCs all connected simultaneously.What I need to do is give my personal computer priority and throttle all other devices. So that I myself will have decent speeds while hampering all of the other household connections. I rely on those speeds for my job and that should have priority over my brother watching music videos on YouTube.
View 1 Replies
View Related
Jun 18, 2008
I have a linksys wrvs4400n router on which:The wireless computers are connected to the home network (v lan 1)Port 1 is connected to the home network (v lan 1)Port 2 is connected to the office network (v lan 2)And the printers are connected to port 3.Now I'd like to setup the router in such a way that all computers have access to the printers (port 3), but I don't know what v lan settings I have to use on port 3, or if it is even possible...
View 5 Replies
View Related
Nov 17, 2012
I have a WRT54G that has worked fine for years, with some PCs hooked up with Ethernet and various other devices connected wirelessly. I came home this afternoon and nothing going through the router could connect to the internet. I've made no changes to anything recently.
I did troubleshooting with Comcast, and we determined that when their modem was hooked up directly to my computer then that computer could connect to the net. Problem solved as far as they are concerned--my router is busted. But I can still connect to the router, and enter its admin screen, and everything looks fine there. The computers on the router can all see each other. So the router is working.
Once I hooked it back up to the modem my computers all lost their internet, but the router does get an IP successfully from Comcast. And it even assigns IPs to my computers that are hooked up to it. It's just that for some reason they still cannot get past the router.I used the ping function in the router admin site and the router pinged Google no problem. My PCs can ping the router without difficulty. But the computers cannot ping Google.
I've tried every combination of power cycles and reboots you can name. I've tried duplicating the MAC address of the PC that connected to the internet onto my router. None of it has made any difference.
View 5 Replies
View Related
Dec 25, 2011
My PC will connect just fine, but it is the only device on my network that the router will allow internet access. The router will allow other devices (DVR, laptop, nook) to connect to it, but won't allow those devices to connect to the internet. Each device will show the same error, - "connected to linksys - no internet". I've reset the router many times with no results.
View 1 Replies
View Related
Dec 20, 2011
I got 5 E2500 routers and the main one has setup to IP address 192.168.1.254 and the rest APs are programmed into the bridge mode with the IP address 192.168.1.245 through 248. The secured wireless network works fine when I roaming between these APs but the only AP that I can get internet access for guest wireless network is the main (192.168.1.254) router; for every other APs, I will get the guest log on screen (prompt for guest access password) and no internet access after I type in the correct access password. Does the E2500 support multiple APs guest or it requires a special way to configure it?
View 5 Replies
View Related
Jul 27, 2011
I have a new laptop that cannot access my home wireless. There are 3 other computers that can access it so I know it's working. When I work away the new laptop can access other wireless connections. But as soon as I get home it's stuck on 'acquiring network address'. The weird thing is my kindle does the same thing as does my friends iphones & ipads. They all connect wireless no problems elsewhere but cannot at my house.
I've tried switching off the other others computers connections & trying to connect. Resetting the router
View 2 Replies
View Related
May 17, 2010
home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies
View Related
Oct 8, 2011
I was getting the standard "Network Path Was Not Found" error that I would get from time to time if I tried to access the drive before my network connection was solid on my computer.So I tried using the Easy Search Utility to "reconnect" to the drive. I tried the mapping feature and when I asked to connect, it asked for a username and password (which I don't remember it asking for in the past), so I typed in the username and password that I use to connect to the drive when doing maintenance and I tried the username and password I use to connect to the drive when connecting remotely through DynamicDNS. Both ended up giving me an error that it couldn't connect.
NOW when I try to use the old mapped reference to connect to it, I get the following error... "Z: refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure the disk is properly inserted...."
I'm currently having troubles using my XP laptop (although I have another XP that is still connecting just fine)One strange thing to note... while I was pecking at buttons trying to figure out what it could be, I started using the Wireless Network Setup Wizard and the first option it gave me was to Add Computers to the Network FSHGuest... which is a hospital network I was using. I didn't complete the wizard. Not sure if this has ANYTHING to do with my problem, but I thought it was interesting.and I checked the wireless workgroup and it is still set to the same group that all my computers are. Can you tell I'm not terrible proficient at network stuff?
View 1 Replies
View Related
Dec 13, 2012
Here is my setup:
Netgear WNDR3700 - Main router, DHCP turned on
4x Netgear WNR2000 - Setup as Access Points (DHCP turned off), connected to main router via LAN ports
I only want the guest network to have internet access. I have the guest network enabled on the router and access points with the option to "Allow Guest network to access main network" disabled. My problem is that since the access points aren't hooked directly to my modem via the WAN port, the guest network broadcasted from the access points does not have internet access.I have read up on setting up a separate subnet for the guest network using DD-WRT but was curious if there was a way to get the desired result with the stock Netgear firmware.
View 9 Replies
View Related
Feb 26, 2012
I usually access my network computers by typing "\ipaddress" in run command. But sometimes this doesn't work so I have to type the computer name to access it. Similarly, sometimes i could not access with name but could access with ip.
View 7 Replies
View Related
Dec 11, 2012
I cant seem to access a webpage. I have 2 computer hooked up to a router and the router to a cable modem. One computer works fine and the other all of the sudden stopped being able to access the web. It says I have a connection but internet explorer and firefox can pull anything up. On bottom right it says local area connection is connected but another one says local are connection4 network cable unplugged. all cables are fine and network adapter says its working properly
View 7 Replies
View Related
Oct 10, 2011
My home LAN supports 3 Chinese students who spend many hours each day watching movies through either Baidu or QQ. Both these operations seem offer streaming video but in a P-2-P mode. As a result typical daily uploads are running at greater than 6GB. My ISP daily upload limit is 1750 MB; after that I am throttled to 25% of the service I am paying for.I have tried and failed to explain to the students the impact this is having on me. I would like therefore to be able to prevent P2P uploads by suitable settings on my router. Is this possible?
View 9 Replies
View Related
Feb 3, 2011
can view other computers but i cannot access them. i have 2 vista machines one xp and one windows 7. ive tried different hubs, switches and routers. wired and wireless.
View 14 Replies
View Related
Apr 7, 2011
Computer A: Vista x64 Home - connected to router by LAN<br><br>
Computer B: Windows XP Home - connected to router wirelessly<br><br>
Both of these computers are connected to my router's network without problems. Computer B cannot access the internet through the network (but, neither has the multitude of other computers who connect to our network wirelessly)<br><br> Computer A can see Computer B in the Network Places, but attempting to access gives the error "network path not found".
Computer B can only see itself under Workgroup computers.<br><br>
I have enabled NETBios on both machines.<br>
Both machines are in the same Workgroup.<br>
Both machines have a shared folder on the desktop with permissions set to everyone.<br>
Both machines not only have firewalls disabled, but I have uninstalled them completely.<br>
[code]...
View 5 Replies
View Related
Sep 10, 2011
whether it's possible to access information relating to 1 computer, from another machine that has previously connected to the same wifi network?For the first time I've connected my work computer to my home wireless network to work from home. When I return my computer to work, will they be able to see everything I've done on that home network using my personal laptop arous that time? My wifi network has WPA2 and has a password. I imagine the work computer would need some kind of logging software, how can I tell this?
View 5 Replies
View Related
Feb 11, 2011
I understand we cannot view computers that in different workgroup though in the same network. But when I try to add printer it lists even those local printers that is attached and shared in different workgroup.
View 1 Replies
View Related
Jun 2, 2012
Let me start off by saying both computers are running Windows 7 Pro x64, both have file and printer sharing turned on, use 128-bit encryption, password protected sharing is off and Windows manages homegroup connections.
Computer A cannot access its own or others shared network folders through the network icon on the desktop, I get the message "Windows cannot access \Computer-AMy Documents" and if I try to access Computer B it gives me "Windows cannot access \Computer-B". Computer B can access Computer A through the network with no problems. The folders have had the permissions set to Everyone.
View 1 Replies
View Related
Jan 29, 2013
I will like to know that i have 3 computer in a router (tplink broadband router n-series) network which has internet access but i don't want to access internet in other 2 computer how can i do that?
View 1 Replies
View Related
