Multiple Computers With Same IP?
Jul 21, 2011
I have 4 computer, all with them IP address. There is nothing I can do about this. I'd like to access them each via a 5th computer. Originally I thought I can connect each of the 4 computers to 4 different routers and then use NAT to convert their IP address's to 4 unique ones. When I actually applied this solution, the 5th computer was not able to ping the converted IP address. This method either does not work, or I did not config the router correctly. I was using a Cisco RV016 out of the box, and added NAT entries into it's table.
View 7 Replies
ADVERTISEMENT
Jun 21, 2011
I have few computers behind the wireless router. All the computers have static private addresses 198.168.1.xxx. The issue is that when I try to access any computer e.g to use FTP. From outside since I can only use the main WAN IP address when I use FTP I can only connect to one computer basically the one running FTP service on port 21. I can access the wireless router and if necessary can do the port assignments. My question is that if multiple computers are running FTP services behind the router how can I connect to each one of them.
View 1 Replies
View Related
Jan 11, 2012
I have 3 Macs (OS 10.6.8) and one PC (Windows 7) at work. They are all connected to the company network for internet and access to shared network drives.The computers are used for media (mostly video) production and we need to move large files between the computers easily and quickly. The current network (company wide) is slow and unreliable, so I would like to create a separate network for these four computers and have them connected to both the company network and the office room network. Each computer already has two network ports and I have a router I can use.
View 3 Replies
View Related
Oct 13, 2012
I can't connect to one website. Not on my computer, not on my father's computer. I think the network is the problem, which is why I'm posting here. The website was working even yesterday but during yesterday evening, it stopped working and it's been like that since. I don't know how to fix it. My command prompt says my server can't find that one website and says my server failed. I tried other things like scan my computer, restart it, look at my Chrome settings, my firewall settings, nothing worked. I'm not sure what's going on here, because the network is private, and the contact information for 2Wire/Pace was useless for me, so I don't know what to do.
View 3 Replies
View Related
Feb 20, 2013
How to print in one printer using multiple computer?
View 1 Replies
View Related
Jul 22, 2012
I currently have mutiple computers at my place. Once the computer turned on i want the option of which login for the current computer to use, it can login it current computer or the mutiples computer with their content/data all inside. So more like an computer linked. Example, it can only to A or B, A is the current computer data, while B have all the data of the different computer monitor datas, and if i login B it will show that current computer info. And same goes to the B computer, i can login to A or B on the B computer. What makes this very good is that, both the computer logins are sort of connected, for example if im on actual computer A, but logined to computer B and downloaded/changed some files/data on the B login, once i login on computer B to login B, the changes will apply even tho the changes are done in computer A.
View 1 Replies
View Related
Jun 11, 2011
I have been searching the net for a hub of some sort for a home office. I need it to be able to support printers. It needs to be a wireless router and have a data storage which can be accessed by multiple computers. Like a backup. But the main thing im worried about is if it can be protected by antivirus and stuff.
View 1 Replies
View Related
Dec 11, 2012
My friends and I want to set up a better Teamspeak 3 server but Don't want to spend the money to rent one. We currently have a friend who runs the server on his computer but it is unreliable. We are wondering if we could have multiple computers support one server. So that if one computer fails the server would still get supported by other computers that are supporting the server. Also what would be some recommended hardware stats to run this server.
So I'm asking, can we have multiple computers support a single Teamspeak 3 server?
View 1 Replies
View Related
May 9, 2012
I have one wireless router, 2 computers, 3 wifi laptops. so i want connect these all things in network.
View 1 Replies
View Related
Jun 15, 2012
I don't know if I'm saying this right but, I have two computers in my LAN hooked up by a Ethernet cables to my modem/router zyxel pk5000z we were using theses computers to play together using Game Ranger. We were having some problems connecting to game rooms with a symmetric NAT. When the port forwarding did work it would only let me open ports for one ip adress for 1 computer it seemed. How do you open ports for all computers on your LAN?
View 1 Replies
View Related
Feb 9, 2012
I have a Mac, and my wife has a PC running Windows 7. Since we moved into our new house, our Dlink DIR-601 does not seem to want to send Wi-Fi to both computers at the same time. One of the computers always seems to lag or not have internet connection at all. The Mac also seems to work better and more often than the PC when both are trying to access wi-fi.
I have messed with the channel settings, security, and most other typical settings on the router to no avail. Is there a setting I'm missing or should I enable certain settings that will allow both computers to have the same signal strength and reliability.
View 5 Replies
View Related
Apr 2, 2012
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies
View Related
Oct 21, 2012
how i can configure a second ssid for guest access in our environment. this is our network setup prior to this request: Internet----Firewall (not ASA)---ce520---C1131AG and CME router is also connecting to the ce520 switch. we only have two vlans: one for voice and two for data.
Presently, there is no vlan configured on the AP because it on broadcasting ont ssid and wireless users gets IP from a windows DHCP server on the LAN. the configuration on the ce520 switch port for the AP and other switches say access vlan is the DATA vlan which automatically becomes the native vlan for all trunk port connecting the AP and other Stiches to the network.
Now with this new requirement, i have made my research and i have configured the AP to broadcast both the production and the guest Vlans. The two vlans are 20-DATA and 60-Guest. I made the DATA vlan on the AP the native vlan since the poe switch is using the DATA vlan as native on the trunk ports. I configured the firewall to serve as DHCP server for the guest ssid and i have added the ip helper-address on the guest vlan interface on all switches while the windows server remains the dhcp server for the production DATA Vlan. I have confirmed that the AP, switches can ping the default gateway of the guest dhcp server which is another interface on the firewall. I can now see and connect to all broadcasted ssids but the problem is I am not getting IP addresses from both the production dhcp server and guest dhcp server when i connected to the ssid one at a time. My AP config is attached below.
Do i need to redesign the whole network to have a native vlan other nthan the data vlan? Does the access point need to be aware of the voice vlan? Do the native Vlan on the AP need to be in Bridge-group 1 or can i leave it in bridge-group 20?
View 1 Replies
View Related
Sep 18, 2012
My question is if I can configure 3 ssid, for 3 different VLAN and add the DHCP address from a WAP4410N AP, when you upgrade to the latest version of IOS I can have this functionality?
View 2 Replies
View Related
Mar 9, 2010
Is it possible to have multiple dhcp pools for multiple VLANs? The switch is a 6509 and/or 4506 catalyst. I don't want to use server-based products.
View 5 Replies
View Related
May 13, 2013
I am trying to build a new network from scratch, I have the WLC 5508 w/ Aironet 3600e APs connected to my Netgear Smart Switches and a Linksys RV082 router that I'm using as my DHCP server with several VLANs for several stuff on my Switches.
I have 2 questions:
1. Can I have 5 Interfaces configured on 5 different VLANs, each SSID on each a different Port:
Port 1: Controller management only=> 192.168.x.x /24
Port 2: SSID 1: WiFi Internal=> 172.16.x.x/12 (Radius Auth with no sharing)
Port 3: SSID 2: WiFi Internal w/ sharing=> 192.168.x.x/24 (Radius Auth with sharing)
Port 4 :SSID 3: WiFi Guest=> 10.0.x.x/8 (Web Auth)
Port 5: SSID 4: WiFi IT=> 192.168.x.x/24 ( Radius or certificate Auth with access to the controller management interface)
2. How can I use the Controller as the DHCP server for all the WiFi traffic, and how should that be configured to work with my other DHCP server?
View 3 Replies
View Related
May 28, 2013
i`m facing a problem configuring the mentioned access point to act as stand alone access point with multiple SSID assigned to differnet VLANs the problem is that
1) i`m not able to broadcast the both SSIDs in the same time from the Access point
2) i need to make the radius server to manage the SSID access for the wireless clients (trying to find a way in which the aceess point sends a log for the radius server containing the VLAN id /IP address of the the SSID) you may find the below info about the IOS ver. & the configuration?
i`m running IOS /c1100-k9w7-mx.123-8.JEE/c1100-k9w7-mx.123-8.JEE?
View 2 Replies
View Related
Aug 26, 2012
Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups?
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building. Each building is also further grouped as AP groups. I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building? I'm thinking it will work.
Do the buildings have to be outside AP range of each other to avoid problems?
5508 controller
7.2.110.0 code
6 buildings
6 interface groups
1 ssid
View 4 Replies
View Related
Feb 24, 2011
I was able to enable printersharing on two computers with the printer attached to my computer, however, I can see the my computer icon on a third computer but it won't open so I can add my printer to its printer folder. All the desktops are the generic type running windows xp except for mine which is running windows vista.
View 1 Replies
View Related
Feb 18, 2013
Since about a week ago, my room-mates and I have been getting lag spikes on the internet when more than one of us are on the internet at once, yet the connection is perfectly stable when there is only one active. ( Does not matter which one. )
I've run Avast, AVG and CCcleaner, on all the computers and the spikes still persist. I've also replaced my router with no results. Here's my system info and some tracerts showing the lag spikes
System info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 640 Processor, AMD64 Family 16 Model 5 Stepping 3
[Code].....
View 3 Replies
View Related
Jun 11, 2011
I have an XP machine that is unable to see any other computer on the network. I disabled the firewall and I can ping any device on the network with no issue. I have set several other computers to the same workgroup which is mshome. Lastly I have read several other post and tried the ideas there including this one...Finally, let's do the stack repair.TCP/IP stack repair options for use with Windows XP with SP2.
Start, ]R[/B]un, CMD to open a command prompt:
In the command prompt window that opens, type type the following commands:
Note: Type only the text in bold for the following commands.
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog
Reboot the machine.That did not seem to work. As I am still in the same situation.
another note. This is the only XP on the network. Everyone else is Windows 7. Also on a side note, the reason I am doing this is to install a printer on this one and allow the other computers to print from it and seeing folders is good also.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Upstairs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown[code].....
View 10 Replies
View Related
Apr 11, 2013
I need to format about 60 computers and they are all networked. Its tedious to walk around to each of them with removable media devices doing it.
View 1 Replies
View Related
Jan 19, 2011
I have a wireless ADSL Router with 2 Windows 7 Computers Connected to it via Wireless.They can see the internet and the Network but not each other.I have connected a wireless HP Officejet 1050 Printer to the Wireless and it can see the wireless and connects.No computers can see the printer or each other on the wireless network and I can not setup the computers to print to the wireless printer.
View 1 Replies
View Related
Feb 20, 2013
HOW TO CONNECT MULTIPLE COMPUTER TO PRINT IN ONE PRINTER
View 1 Replies
View Related
Aug 14, 2011
A customer need diagram on how to connect 4 computers working together.
View 1 Replies
View Related
Oct 7, 2011
I have a wireless router which works just fine. I can connect my laptop as well as my iPad to it. I also have a hard wire connection that goes to my computer which works just fine. how can I get my computer to see the other computers in the network? They just don't show up even though I have shared enabled. There is only one router, so I thought it might be automatic, but it doesn't seem to be.
View 2 Replies
View Related
Dec 21, 2012
Buy 24port Network Switch connect all 20 computer to it using LAN wire configure the IP Address & Sub mask individually to each computer (Rem: # every IP Address should be similar in first 3rd Quads & 4th Quad should be UNIQUE i.e, 192.168.0.1 then 192.168.0.2 and so on to 192.168.0.20) then input Subnet Mask as 255.255.255.0.Apply & Restart every computer inividually.
View 2 Replies
View Related
Aug 8, 2011
I have two identical computers on the same home network (and a couple of others too). My problem is the even though they are connected to the same wireless router and can each see the internet and the printer that online they cannot see each other. When I ping one from the other I get no response though they both receive responses from the router. I can't transfer files etc. It works a while ago but can't seem to get them connected again.
View 9 Replies
View Related
Oct 23, 2012
Wanting WiFi available for 100 or more at once for large meetings. What is the best way to solve the throughput problem for such a large group who all may at times be downloading data simultaneously?
View 1 Replies
View Related
Oct 8, 2011
I was getting the standard "Network Path Was Not Found" error that I would get from time to time if I tried to access the drive before my network connection was solid on my computer.So I tried using the Easy Search Utility to "reconnect" to the drive. I tried the mapping feature and when I asked to connect, it asked for a username and password (which I don't remember it asking for in the past), so I typed in the username and password that I use to connect to the drive when doing maintenance and I tried the username and password I use to connect to the drive when connecting remotely through DynamicDNS. Both ended up giving me an error that it couldn't connect.
NOW when I try to use the old mapped reference to connect to it, I get the following error... "Z: refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure the disk is properly inserted...."
I'm currently having troubles using my XP laptop (although I have another XP that is still connecting just fine)One strange thing to note... while I was pecking at buttons trying to figure out what it could be, I started using the Wireless Network Setup Wizard and the first option it gave me was to Add Computers to the Network FSHGuest... which is a hospital network I was using. I didn't complete the wizard. Not sure if this has ANYTHING to do with my problem, but I thought it was interesting.and I checked the wireless workgroup and it is still set to the same group that all my computers are. Can you tell I'm not terrible proficient at network stuff?
View 1 Replies
View Related
Aug 8, 2012
Can a computer on our network with no admin privelages cause other computers to shutdown? We have 15 machines that are having force shut downs happening but they are clear of viruses malwares, we have ran multiple scans and nothing but could another computer somewhere on the network tell them to force shutdown closing everything?
View 1 Replies
View Related
Feb 20, 2012
We have 2 LANs to 5 PCS in different office buildings and need to connect them using optic fibre.
View 9 Replies
View Related
Aug 4, 2011
I have a vista, an xp, and a win7 computer networked. The xp is very temperamnetal, in that it randomly is accessible and just as randomly disappears. i often get the message "Computer (name) is not assessible...." The trouble is most acute in trying to access the xp machine from the win7.
View 4 Replies
View Related
