Zyxel Pk5000z - Port Forwarding For Multiple Computers On Same LAN?
Jun 15, 2012
I don't know if I'm saying this right but, I have two computers in my LAN hooked up by a Ethernet cables to my modem/router zyxel pk5000z we were using theses computers to play together using Game Ranger. We were having some problems connecting to game rooms with a symmetric NAT. When the port forwarding did work it would only let me open ports for one ip adress for 1 computer it seemed. How do you open ports for all computers on your LAN?
View 1 Replies
ADVERTISEMENT
Oct 9, 2011
I vave a zyxel p-660HW-T1 v2.I need to do PORT FORWARDING since I want to use an IP Camera in order to have remote access to video.I do not find PORT FORWARDING in the modem configuration. I find NAT, but not port forwarding.
View 1 Replies
View Related
Dec 30, 2012
I am trying to allow an external website access to my http://localhost:8080. It is a trusted website.
I have a ZyXel Q1000 modem and a Trendnet TEW-452BRP router. The TRENDnet is serving a PS3, Xbox, Wii, and 2 iMacs and the ZyXel is serving the TRENDnet.
My public IP for the ZyXel is 65.xxx.xx.152 and it's IP address is 192.168.0.1 with a range of 192.168.0.2-254 My TRENDnet IP is 192.168.1.1 and a range of 192.168.1.100-199
I have setup a Virtual Server on the TRENDnet using HTTP, Protocol TCP 80/80 and LAN Server 198.168.1.109 (my iMac localhost). I have also setup Application forwarding and Port forwarding on both the modem and router (at different times, trying to resolve this).
Naturally none of those worked. I don't know if I need a Port forwarded or Application forwarding or the Virtual Server. Also don't know if either of those need to be on one or both devices.
All I do know is to access my localhost from the Internet, all I need to do is put http://65.xxx.xx.152 in the address bar of a browser outside my network, and my modem/and or router should forward the request to my iMac and my localhost:8080.
But every configuration I have tried does nothing of the sort.
View 8 Replies
View Related
Jul 7, 2011
I am trying to access home security camera from outslide my house.I have an AT&T internet coming into the house. They have a router that comes into the house and that splits off to another router in my house which carriers CAT5 all over the house. One of the wires go to another router that I use for my wireless devices.One of those wireless devices is an security camera.Here is my question. I want to view the camera from the internet outside the house. I have followed the instructions given by the manufacture for port forwarding. I have port forwarded the wireless router since the camera is connected to it. Is that wrong since the DSL is coming in one router and then going to another and then to the wireless
View 2 Replies
View Related
Sep 10, 2011
We've run into some difficulty trying to take advantage of multiple WAN IPs in conjunction with the SRP547
What we're trying to acheive is the ability to port forward from our distinct public IPs to different internal servers. Looking at the options under Port Forwarding it looks like we can only configure forwards at the "WAN interface" level, but our problem is that we can't work out how to set up separate interfaces for each of our Public IPs...
Our ISP provides us with a fully managed NTU/router with a single "Internet" ethernet port, which we can use by statically configuring IPs on our end. For this configuration this port has been directly patched to the WAN ethernet port on the SRP547W.
We have been allocated a 255.255.255.248 (/29) subnet, giving us 5 usable IPs after the ISP's gateway address is taken into account, like so:
a.b.c.208 Network Address (/29 subnet)
a.b.c.209 ISP Gateway
a.b.c.210 IP1
[Code].....
I should mention at this point that we're running on firmware version 1.02.01 (023).
Is there a CLI or other method of configuration that might work if the web interface won't?
View 2 Replies
View Related
Jun 21, 2012
ASA 5505 Firmware 8.3(4), ADSM 6.4(2).I have a public IP address of 168.87.3.4.I need to forward ports (5060, 5080, etc.) to one internal address. (192168.1.1).I need to foward different ports (10020-10080) to a different internal address (192.168.1.2) Everything I read tells me how to do this in a 1 to 1 static NAT.
View 1 Replies
View Related
Apr 7, 2013
I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies
View Related
Oct 17, 2012
We have a ZyXEL (P-2601HN-F1) router and three computers in our house. Currently, we only use cables to connect to the router because we haven't been bothered to setup wireless. However, there's a curious problem where the moment we connect more than 2 devices at a time, the router loses connection to the internet. To be precise, all LEDs are on, except wireless (d'uh) and Internet.
All involved computers run Win7.
View 1 Replies
View Related
Feb 16, 2011
To play one i game i need to open ports 7777 and 7778 , to do that i must access my router.When i connect to standard router ip192.168.1.1 it wont work. To solve my problem i checked the name of router and read the official support.My routers model is Speedtouch 546 v6. and at official faq the adress is given, but it still wont work, then i noticed i have second router i think, its used to connect 2 TV for my internet television, its model is Zyxel ES- 105 a , in official support , their given adress wont work.
View 14 Replies
View Related
Nov 3, 2011
how to open UDP port 16000 in my router Zyxel MAX 206 M1R...when i tried to start AGE OF EMPIRE 2 THE AGE OF THE KING in gameranger it says that my UDP port 16000 is not opened...so i am trying to open it..
View 2 Replies
View Related
Apr 26, 2011
I have a 4-port Zyxel P334U with WLAN, and I would want to set it up so that besides normal WAN, each connected computer also has access to the other local computers. I've tried setting it up before, but haven't managed to get it working, so I gave up.I have DHCP set up, beginning at 192.168.1.16. WAN and ISP DHCP works, so each computer has a local IP (192.168.1.x) and a remote IP given by the ISP.
View 6 Replies
View Related
Mar 12, 2011
I recently purchased a Zyxel PK5000Z modem from qwest, upgrading from my M1000 actiontec. My reasoning was that port forwarding was not working as part of the router on the actiontec, and the pk saved me some money on my bill. So, what I always start out doing on modem/routers is restrict DHCP to 192.168.0.2 to 192.168.0.10, limiting the number of devices that could connect, and I don't know if that really matters or not for this problem, but figured I would throw everything out there. So....My actual problem is that now when boot up xbox360 I get a xbox360 live "nat strict" error. I have all the ports suggested for xbox, and the particular games forwarded, and DMZ turned on to the static IP I assigned to the xbox. I started out assigning a static IP reservation in the router for the xbox (the one I set on the xbox), but soon found not needing this. I ran the firmware diagnostic tool in the utilities menu and the "encapsulation test" failed, I called qwest, they have no clue, but sounded like a level 1 dude, but he authorized a new actiontec pk5000.
View 3 Replies
View Related
Jul 21, 2011
I have 4 computer, all with them IP address. There is nothing I can do about this. I'd like to access them each via a 5th computer. Originally I thought I can connect each of the 4 computers to 4 different routers and then use NAT to convert their IP address's to 4 unique ones. When I actually applied this solution, the 5th computer was not able to ping the converted IP address. This method either does not work, or I did not config the router correctly. I was using a Cisco RV016 out of the box, and added NAT entries into it's table.
View 7 Replies
View Related
Jun 21, 2011
I have few computers behind the wireless router. All the computers have static private addresses 198.168.1.xxx. The issue is that when I try to access any computer e.g to use FTP. From outside since I can only use the main WAN IP address when I use FTP I can only connect to one computer basically the one running FTP service on port 21. I can access the wireless router and if necessary can do the port assignments. My question is that if multiple computers are running FTP services behind the router how can I connect to each one of them.
View 1 Replies
View Related
Jan 11, 2012
I have 3 Macs (OS 10.6.8) and one PC (Windows 7) at work. They are all connected to the company network for internet and access to shared network drives.The computers are used for media (mostly video) production and we need to move large files between the computers easily and quickly. The current network (company wide) is slow and unreliable, so I would like to create a separate network for these four computers and have them connected to both the company network and the office room network. Each computer already has two network ports and I have a router I can use.
View 3 Replies
View Related
Oct 13, 2012
I can't connect to one website. Not on my computer, not on my father's computer. I think the network is the problem, which is why I'm posting here. The website was working even yesterday but during yesterday evening, it stopped working and it's been like that since. I don't know how to fix it. My command prompt says my server can't find that one website and says my server failed. I tried other things like scan my computer, restart it, look at my Chrome settings, my firewall settings, nothing worked. I'm not sure what's going on here, because the network is private, and the contact information for 2Wire/Pace was useless for me, so I don't know what to do.
View 3 Replies
View Related
Feb 20, 2013
How to print in one printer using multiple computer?
View 1 Replies
View Related
Jul 22, 2012
I currently have mutiple computers at my place. Once the computer turned on i want the option of which login for the current computer to use, it can login it current computer or the mutiples computer with their content/data all inside. So more like an computer linked. Example, it can only to A or B, A is the current computer data, while B have all the data of the different computer monitor datas, and if i login B it will show that current computer info. And same goes to the B computer, i can login to A or B on the B computer. What makes this very good is that, both the computer logins are sort of connected, for example if im on actual computer A, but logined to computer B and downloaded/changed some files/data on the B login, once i login on computer B to login B, the changes will apply even tho the changes are done in computer A.
View 1 Replies
View Related
Apr 22, 2013
how to: port forwarding to 2 different destinations based on incoming WAN port
The default HTTP service works fine: TCP80/80-> 192.168.0.55
I have a couple of IP security camera's I'd like to be able to access remotely that also listen on port 80. I tried TCP & UDP 8009/8009-> 192.168.0.9 without any luck. Not sure how to handle the port redirects on the RV042G? Seems simple and was on the Symantec, could be user training :-)
I was able to do port redirect with the Symantec Firewall I'm replacing.
View 2 Replies
View Related
Mar 7, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media
Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.
View 1 Replies
View Related
Dec 2, 2011
So here is my network.
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
and here is my dilemma.
I can SSH from the internet to my ASA on default port 22, directly to my public IP. I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960. From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841. I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
The bottom line is that i want to be able to SSH to all three devices from the internet. I only have one public IP. As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001. It appears that changing the default SSH port on Cat 2960 is not an option. It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
show asp table socket
TCP 001f549f <<pub IP>>:22 0.0.0.0:* LISTEN
how do i make it listen on different port?
Here is relevent config for SSH for cisco 1841 (port forwarding)
ON ASA
object network ROUTER
host 10.10.1.1
[Code].....
View 28 Replies
View Related
Oct 11, 2012
Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23 ?
First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80
View 2 Replies
View Related
Feb 16, 2011
I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
View 2 Replies
View Related
Jul 16, 2011
I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking ****, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.
View 1 Replies
View Related
Apr 13, 2013
I've set up port forwarding from an external port (9000) to an internal port (80) on our SRP541W, and for some reason, it's not working externally. If I access the public address from within the internal network, it works properly.
View 6 Replies
View Related
Jun 11, 2011
I have been searching the net for a hub of some sort for a home office. I need it to be able to support printers. It needs to be a wireless router and have a data storage which can be accessed by multiple computers. Like a backup. But the main thing im worried about is if it can be protected by antivirus and stuff.
View 1 Replies
View Related
Dec 11, 2012
My friends and I want to set up a better Teamspeak 3 server but Don't want to spend the money to rent one. We currently have a friend who runs the server on his computer but it is unreliable. We are wondering if we could have multiple computers support one server. So that if one computer fails the server would still get supported by other computers that are supporting the server. Also what would be some recommended hardware stats to run this server.
So I'm asking, can we have multiple computers support a single Teamspeak 3 server?
View 1 Replies
View Related
May 9, 2012
I have one wireless router, 2 computers, 3 wifi laptops. so i want connect these all things in network.
View 1 Replies
View Related
Jul 31, 2011
I want to create a Counter Strike Server and need to open some ports for that.The Problem: I cannot seem to open the ports for gaming.The Modem Setup: My Firewall is disabled.My guess is that, this is the area with the problem. I guess my modem is not forwarding onwards.The Problem: I tried checking my ports with websites like URL etc.It cannot access my port.
View 1 Replies
View Related
Feb 9, 2012
I have a Mac, and my wife has a PC running Windows 7. Since we moved into our new house, our Dlink DIR-601 does not seem to want to send Wi-Fi to both computers at the same time. One of the computers always seems to lag or not have internet connection at all. The Mac also seems to work better and more often than the PC when both are trying to access wi-fi.
I have messed with the channel settings, security, and most other typical settings on the router to no avail. Is there a setting I'm missing or should I enable certain settings that will allow both computers to have the same signal strength and reliability.
View 5 Replies
View Related
Apr 2, 2012
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies
View Related
Aug 7, 2011
I have a DSL-524B from D-Link. My problem is, whenever I Port Forward port 80 to my comp's IP to host a web server, all the other computers connected to the router are unable to access the Internet. So, I set up no-ip to use port 8080, but, this exposes my ip and even when masking, if you look at the HTML code, you get the ip.I need to know how to open up port 80 without restricting Internet access to only my comp, or any other work around.
View 7 Replies
View Related
Nov 10, 2012
I was at a friend's office today trying to get the IP cameras working but forwarding the ports seems not to work with his current modem from ATT (a Westwell F90 or something). Would the workaround for this be purchasing a third party modem instead that supports port forwarding and stop leasing the Westwell F90 from ATT?
edit: the modem is hooked up to a DI-524 from D-Link and i already forwarded different ports to see if it was specifically port 80, 1024 etc
View 2 Replies
View Related
