Find A Machine By Hostname In Campus LAN?
Dec 12, 2011
I manage the network of a small (120 users) network spread out over 5 sites within a 10 mile radius (for normal ops- extended ops can expand to include other cities).I think I'd call that a Campus LAN, perhaps it's just a really small MAN (for normal ops)...I am starting my CCENT/CCNA track so this may be blazingly obvious to some of you- but I'm sure to learn something either way...Every now and again we have to go find "hostname "X"" for an update that won't roll out by way of our (Server Sr SysAdmin's) tools, so we actually have to put hands on it. Unfortunately the prior admins didn't document the inventory to such a level that we know "laptop_015" is in the building down by the college.
I DO have documentation on my equipment (I'm the Network Sr SysAdmin) that I have rolled together over the last 9 months being here...I have a Cisco 5520 ASA, and use ASDM to manage it. What would be extremely handy would be the ability to put a query in the system to report back what switch a given hostname is plugged intoBetter yet, if it could tell me switch and switchport.I imagine this would be simple if I had the MAC address- there's got to be a way to grep the switches for a given MAC- but not sure if it'll work in a similar fashion for ARP lookups.
View 19 Replies
ADVERTISEMENT
May 15, 2012
I want to know IP address ,If I know hostname {OR} I need to know hostname,If I know IP address.
View 2 Replies
View Related
May 13, 2012
I know a ip from a thing without being connected? I'm working yhe.. now I can't access physical to pc because its implanted in some officce wall but i knwo its log on in net service... the only thing i want its to find the ip from it like magic I dont know
View 2 Replies
View Related
Aug 2, 2011
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Apr 29, 2012
I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies
View Related
Feb 20, 2011
So instead of using 192.168.* how can I have computers on my router use my school's 152.65.*? It'd be nice for sharing things around the place. I'm just not sure a WRT54gs2 can do this as I'm not sure its software allows for such routing capabilities.
I sort of know how one would theoretically do this (I'm currently taking a networking class at school) but can I do this with a WRT-54gs2?
View 1 Replies
View Related
May 10, 2012
What ways can i connect the two building networks together(i.e best tools to use) supposing each building has a router. How will i make computer no. 10 accessible by all computers in the network.
View 1 Replies
View Related
Jan 1, 2013
I am having Cisco LMS 3.2.I want to give an access to some desktop administrators so that they can pull the report of User Tracking in campus manager. Is there any way so that I can restric users to campus manager only?
View 9 Replies
View Related
Dec 12, 2011
UTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application".
View 1 Replies
View Related
Dec 9, 2012
I have a task to compare different approaches to implement InterVLAN routing in campus network. Google suggests only Cisco technologies for such query. But what I need is also other companies solutions (like Dell, HP etc), cost of the implementations, pros and cons.
View 1 Replies
View Related
Feb 19, 2012
I have the following drawback was held on autodicovery on a CiscoWorks LMS 4.0 which captured all the IP's of the devices on the network between these found a LAN segment that connects to all devices, when creating this view for the Campus Manager appears a LAN segment and We don´t want to appear there on the views, can you edit the view and delete this segment of the map. or if it is necessary to rediscover again.
View 2 Replies
View Related
Nov 7, 2012
I have 5 Static Ip pool all IPs are working fine. I have deploy a IIS Server on Windows2008 and configure the Static IP on that server. earlier it was working fine . but since last month the IP is not pinging from Out Side but internal IP Pool its working. I have checked the SERver firewall and another Setting is Ok. if i changed the Ip from the server the new IP is also not pinging.
View 1 Replies
View Related
Apr 26, 2011
How to setup a WIFI Network in a large campus building.
View 5 Replies
View Related
Nov 16, 2011
this is a device discovery issue with LMS 3.2. The devices added up in Common Services are not getting reflected under Campus Manager and Device Fault Manager. The devices are manually added and are stack switches (2960S-24TS-L).
View 1 Replies
View Related
Dec 29, 2010
I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 19 devices in Not Managed state.
View 5 Replies
View Related
Apr 21, 2010
I'm going to start the evaluation of implementing the virtualization of our campus LAN using MPLS.We'll get many inter-VLAN routing domains per VRF on the same LAN infrastructure.The LAN infrastructure is based on C6500 implementing VSS.Do you have experience with this kind of setup?Any known/faced issue that might prevent the setup of MPLS on VSS enabled C6500?
View 4 Replies
View Related
Aug 26, 2012
I manage a small/medium sized campus network consisting of 4 Cisco 6500 series chassis (each with SUP720's) and a couple hundred Cisco 3550/3560/2960 edge switches. We recently completed a new leg of fiber that will make a completed loop between all of the 6500's .... before I make the pyhsical connection I need to figure out my OSPF entries on each 6500 switch.
View 4 Replies
View Related
Oct 2, 2011
In regards to a WAN connection, how would you recommend we connect a leased campus to our existing network. It is a temporary location that must be connected for a year.
We have an available 3845 with a VWIC2-2MFT-T1/E1 card. We are supposed to be getting 2-T1 lines from Verizon. I have a spare 3750 L3 switch for the core and 6 access switches.
View 1 Replies
View Related
Sep 29, 2011
When will Campus Manager support the 2960S switch series?
View 2 Replies
View Related
Feb 14, 2012
I have a strange problem with one switch in my LMS 3.2.1 installation.It is a WS-C3560-48TS with IOS 12.2(50)SE3 running. I have nine switches with the same type and IOS running without problems.
I notice the problem because there were no UT data for that switch. In RME and CS it was managed.Checking SNMP and config of the switch, but can't find any issues.Because at this time LMS ran in version 3.2 I installed at first CM 5.2.1 and after that the patches for CSCtd49439 and CSCtg20882.Next step was RME 4.3.1 with a lot of patches for different issues. Then I installed the patch for the internal error of CS (CSCtd07131).And finally I installed LMS 3.2.1 and patch for CSCto46927.Last step was installing the latest device packages. I did this directly from the application because it is much better handling than do a manual download. No the system seems to be fully updated.
I had the hope that CM will now find and manage this one switch. But it is still not available.I can't find the device in the data collection. But I can find it in the "Include Devices From DCR", although I configured to fetch all devices from DCR automatically to CM. To manually include the device is not working, too.
P.S. I used that step-by-step update path because it worked on two other servers very well for me.
View 1 Replies
View Related
Sep 28, 2011
We are using Campus Manager 5.2 with LMS 3.2. We have 100 devices and all 100 devices has been successfully discovered in Common services in all 100 devices are showing in DCR.When we check in RME we have found all 100 devices over there.
But, in Campus Manager we got only 95 devices. out of 88 WS-C2960G-24TC-L 5 switches are not showing in Campus manager. we have added the same manully ( manually included & Ecluded all 5 devices in Campus manager) and start the data collection, but no result.
After data collection it is showing not managed by Campus Manager when we check ( Show all Included devices option).
View 5 Replies
View Related
Jun 27, 2012
I have Windows 7 x64 on my desktop, laptop, and HTPC. The past few months, everything worked fine. Today, I can ping my IP address but I cannot ping the host name on all 3.They also do not show anything in the network window, just the computer that I'm on.
View 1 Replies
View Related
Nov 23, 2012
I`m working on Dynamic Vlan Assigmenton the basis of end user authenticatedwhoc are part of specific AD Group in c ampus enviorment.Objective: Need to assign the vlan on switch port on the basis of authenticated users OU Group in Active Directory. Eg: There are 2 OU groups in AD, Sales and Administration. Authenticated user in Sales group should get Vlan 10 and user in Admininstration Group shoudl get Vlan 20.
Components:
Cisco 3750x/Cisco 4500
ACS Version 5.2
Microsoft AD
View 1 Replies
View Related
May 2, 2012
how to get the Computer name of any computer on the Network by using its MAC Address. I am really in need of it
View 5 Replies
View Related
Sep 5, 2012
We have one business application, accessed across GCC region by having a single entry with individual computer hosts file, ie123.123.155.116 myappl.mycompany.com and other than Bahrain, all countries are able to successfully resolve the hostname (application only works against hostname (Oracle EBS)) against this entry with the hosts file. Now, prior contacting the ISP in Bahrain (where internet is regulated due to the current political situations) we need to know whether anything could be done from our end to resolve this issue.
View 2 Replies
View Related
Dec 8, 2012
I have a small workgroup at home of about 4 or 5 computers. All the PC's, notebooks are running W7. I have one PC that I use as my "always on PC", with all my media and resources I use on it. The NetBIOS or computer name assigned to it is mediapc with a static IP of 192.168.254.150. All my other desktop PC's, excluding the notebooks, have a static IP also.The problem is more annoying then anything, and thus I only work on it intermittently. Today I decided to post after wasting much of another day attempting to resolve the issue.The problem is accessing my mediapc from any of my other computers while using the computer name, "mediapc". If I use the static IP assigned above, there is no problems. Everything works, RDP, Dameware, Telnet, SSH, Ping,Tracert, etc. If I use the computer name "mediapc" then it fails with an unreachable host error or similar. The reason it fails is because somewhere in my network or in the mediapc itself, it wants to resolve the "mediapc" name to an unknown IP of 192.168.254.47.
Now with this said, I can still share files and access the mediapc using the name in a UNC syntax, like //mediapc/data works fine or directly clicking on the mediapc share under Network works also. If I Ping mediapc from any other PC than itself, it fails with the 254.47 IP. If I try to use any remote connection software and use the name mediapc, it fails to connect.This is what I know and have tested:
1. Adding a host entry to all the client computers works but does not fix the root of the problem.
2. nslookup mediapc reports the wrong IP of 254.47
3. Remote connections as I mentioned above fail because the name is resolving to an invalid IP.
4. Pinging mediapc from itself, displays the correct IP of 254.150, although I have to use the -4 parameter.
5. Arp -a on all PCs report correct IP of 254.150 with the correct MAC address. (There is no 254.47 listed)
6. NBTstat -a mediapc reports correctly and shows the correct MAC address.
7. Network shares work correctly from and to the mediapc without issue. No access problems.
8. I have deleted all arp entries and flushed the dns with no change.
9. MS mentions to change order of the Bindings of the adapters, yet I only have one Local Area Connection.
View 8 Replies
View Related
May 15, 2011
How is a computers hostname translated into an IP-address?Eg. when i enter "\server1" into the "run"-menu i get access to my server at IP-adress 192.168.1.2, but how does my computer know what IP-address is it?
View 5 Replies
View Related
Aug 31, 2012
I am having trouble with getting a copier that I have networked to stay registered in the system. When connecting all the equipment back for the new year I was having trouble getting this one specific copier back online properly. I used to have it assigned with a static IP because the person that was here before me had all the computers map the printer using the IP instead of Hostname but that was causing IP conflicts so I removed it and mapped the printer through Hostname which is made "MPF-TOSHRM328"So now for the actual problem, after the copier got the new dynamic IP of 10.8.214.151 i thought it would be fine and everything would click in because it was mapped to the host name and not the IP. But when I do a tracert on the hostname it still shows up with the old IP. and now that the old ip has been reassigned it actually points to a physical machine now. Weird. All attempts to flush the DNS have not resolved the issue. I even tried going in and deleting the entries in manually. No luck. As a point of reference here is the result from the tracert.Tracing route to MFP-TOSHRM328.78B450.nycboe.org [10.8.214.126] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms SLS330W09 [10.8.214.126]Trace complete. I should also mention that this server is only here in the sense that it is the DC for the computers on this floor. There is a whole other system that assigns the IP's and handles the DNS. I do not have access to it, it is run by the main network people at the central offices.
View 9 Replies
View Related
Aug 6, 2012
is there any way to apply hostname or object network in the syntax? The command gives the option to use hostname or A.B.C.D but doesn't accept the hostname PIX1(config)# filter url except 0.0.0.0 0.0.0.0 ?configure mode commands/options: Hostname or A.B.C.D The address of foreign/external host which is destination for connections requiring filtering Can an FQDN be used as a foreign/external host?
View 3 Replies
View Related
Feb 10, 2013
Our Cisco team does inventory pulls with CNC and i was informed that this uses the hostname field currently the report pulls the IPadress, the discoveries that run on the LMS populates displayname field and puts the IP address in the hostname field. is there anyway to update this via query or process, i have too many devices to manually update this.
View 1 Replies
View Related
Jun 21, 2012
I'm trying to use MRTG and SNMP on a Windows Serveur 2008R2.I want to manage my Switch with mrtg, but it don't show me which computers or server are connected to the Switch's ports.All I have, in the .cfg file is the interface name ( like S0/0 ), which are useless for me, I would like to get IP adresses or hostname but mrtg doesn't seems to do it.Any of you know if Mrtg can do that ? or maybe there are some others ways to do that ?
View 1 Replies
View Related
Dec 13, 2012
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
View 2 Replies
View Related
