High Speed Campus Network
May 10, 2012What ways can i connect the two building networks together(i.e best tools to use) supposing each building has a router. How will i make computer no. 10 accessible by all computers in the network.
View 1 Replies
ADVERTISEMENT
Implementing InterVLAN Routing In Campus Network?
Dec 9, 2012I have a task to compare different approaches to implement InterVLAN routing in campus network. Google suggests only Cisco technologies for such query. But what I need is also other companies solutions (like Dell, HP etc), cost of the implementations, pros and cons.
View 1 Replies View RelatedHome Network :: Unable To Ping Static Ip From Outside Campus
Nov 7, 2012I have 5 Static Ip pool all IPs are working fine. I have deploy a IIS Server on Windows2008 and configure the Static IP on that server. earlier it was working fine . but since last month the IP is not pinging from Out Side but internal IP Pool its working. I have checked the SERver firewall and another Setting is Ok. if i changed the Ip from the server the new IP is also not pinging.
View 1 Replies View RelatedHow To Setup Wifi Network In Large Campus Building
Apr 26, 2011How to setup a WIFI Network in a large campus building.
View 5 Replies View RelatedCisco WAN :: 3845 - Connecting Branch Campus To Existing Network
Oct 2, 2011In regards to a WAN connection, how would you recommend we connect a leased campus to our existing network. It is a temporary location that must be connected for a year.
We have an available 3845 with a VWIC2-2MFT-T1/E1 card. We are supposed to be getting 2-T1 lines from Verizon. I have a spare 3750 L3 switch for the core and 6 access switches.
Cisco AAA/Identity/Nac :: 3750x / Dynamic VLAN Assignment For Wired Campus Network
Nov 23, 2012I`m working on Dynamic Vlan Assigmenton the basis of end user authenticatedwhoc are part of specific AD Group in c ampus enviorment.Objective: Need to assign the vlan on switch port on the basis of authenticated users OU Group in Active Directory. Eg: There are 2 OU groups in AD, Sales and Administration. Authenticated user in Sales group should get Vlan 10 and user in Admininstration Group shoudl get Vlan 20.
Components:
Cisco 3750x/Cisco 4500
ACS Version 5.2
Microsoft AD
E2500 Router Not Obtaining IP From ATT High Speed DSL?
Jul 3, 2012So I received a new modem today and wanted to tandem it with an extra router that I have so I can get wireless at work. Here are the steps I've taken:Verify modem connection works connected directlySet modem to bridge modeReset router, set to PPPOE with proper log in Try to connect, and get the message "Could not obtain IP from PPPoE"I've researched as much as I could stand online, and found these to be the major steps everywhere, most people miss the bridge mode but I'm sure I've done it properly (switched back and forth atleast 5 times). I don't currently have access to the connection but I can respond tonight to questions about what else I may or may not have done, and will take what is suggested here to try tomorrow
View 14 Replies View RelatedSpeed Tests High But Slow Internet
Sep 30, 2011I'm new to the site and for the past couple of days I've been trying to figure out why my connection is so slow. I only get about 180kbps of download speeds so I originally thought it was my internet, but I went to test my connection speed on speedtest.net and I get around 1mbps. I also checked my network utilization through task manager and I'm not even using 1% Any Ideas as to why I can't make full use of my connection?
View 3 Replies View RelatedUse A High-speed Usb Port For Wifi Receiver?
Apr 20, 2012I have an old PC in my Buenos Aires apartment, connected to WiFi by means of a receiver module - because the modem is across the room and too far to connect by cable...But I get the message that the device would work more efficiently with a high-speed USB port...If I installed a high-speed card inside the computer, would this improe my Internet speed? It hangs up quite a bit... but then again, it's a Pentium III, so there's that limitation too.
View 1 Replies View RelatedIE And Itunes Only Work When On High Speed Internet?
Nov 10, 2011for some reason when I'm using high speed internet my internet explorer and i tunes work great. but when i use dial up my internet explorer tells me its unable to display every web page i type in. and when im on itunes when im using dial up i cant connect to the store, it says something like check your network connection and make sure its still active.
View 4 Replies View RelatedCox Cable High Speed Internet / Frequent Disconnects?
Mar 27, 2012The modem checked out and was all good, the splitters are brand new and the line is apparently fine.This left the router as the issue. We had a Netgear router and attempted to replace it with a Linksys router.The firmware on both routers have been tested both old and new firmware.This happens to all computers/laptops connect to the network I do not receive a message stating that I was disconnected from the network, the internet simple cuts out for a little while and then comes back in.Cox says that they are 100% certain it is not on their end, nor is it the modem.The disconnects occur at random (there is no specific intervals). They last anywhere from 30 seconds to 10 minutes.
View 8 Replies View RelatedVideo Buffering Slowly On High Speed Connection?
Apr 14, 2013I've been having trouble recently with the buffer speeds on youtube.. i use google chrome, and i have a custom built pc with high end specsmy internet connection ranges from 50mb/s to 90mb/s as shown below(i pay for 100mb/s with virgin media, but the speed varies a lot throughout the day)I run a wired connection and have tested different cables, with no success.If i clear catche/browser history ECT i get a short-term buffer speed boost, but after a few minutes the buffering becomes super slow again.people in the same house are having there videos load instantly, with computer no were near as good hardware wise as mine and using a wireless connection.i've tried a few things.. none of witch have worked.. with my speeds i should be able to watch videos in HD and have them buffer instantly.. at this point i cant even watch them in 320p.
View 19 Replies View RelatedLinksys Wireless Router :: E2500 Not Getting High Speed
Jul 8, 2011Internet speeds through my modem are 15+mbps.its usually at 1-5 mbps.This woudln't be such a big deal only that now I lag in online gaming.
View 7 Replies View RelatedNokia Siemens / High Downstream Rate But Low Download Speed
May 17, 2011I am using a broadband connection on a PC running Windows 7. The plan which my ISP is providing me comes with a speed of 4Mbps upto first 20 GB and then 512Kbps after that, every month. My problem is that I am getting only 65-70 Kbps download speed. (tested over various sites and torrents). My router (Nokia Siemens) settings show that my Downstream speed has been assigned as 7999 Kbps but still I am not getting the speed anywhere near that and I have not consumed the 20GB limit as yet.
View 12 Replies View RelatedConnect PC With Laptop With LAN Cable For High Speed File Transfer?
May 7, 2012How can i connect my PC with laptop with LAN cable for high speed file transfer?
View 2 Replies View RelatedNetgear DG470N - High Speed Switch For Media Server?
Feb 24, 2013I have a Netgear DG470N gigabit modem and I am streaming 1080P films from a 2TB networked hard drive onto a LG 42inch Smart TV viat wired ethernet. Sometimes the films crash and the TV cannot reopen the network folder with the film in until a reset is done on the modem. Is there a high speed gigabit switch that I can use to improve this or should I get some media controlling software?
View 3 Replies View RelatedLinksys Wireless Router :: E2000 Very Slow - Need High Upload Speed
Jul 11, 2012I bought an E2000 router as a replacement for my WRT54G router, since my internet speeds had been upgraded. But this E2000 router has been giving me nothing but trouble.
Wired through both the router or modem, I get my topspeed of 110mbps. However, as soon as I switch over to the wireless N function, my speed drops to only 25mbps. As far as I know, wireless N should have a much faster speed than that. Even my old WRT54G had faster speeds than this new router has. Mind you, that the distance between my laptop and router is about 3 inches away. The further I go away from my router, the speed exponentialy drops (20 feet, and the speed even drops to below 10mbps). Even with different laptops that have completely different wireless cards. Now honestly, I have tried EVERYTHING to get the speed up. Both 2.4 and 5ghz, 20mhz only, 40 mhz only, different channels (currently the router is in channel 11, being the only router in that channel), setting the network to G-only. I tried changing the Beacon interval thing in numerous settings, I even tried changing the MUT. Firmware is completely up to date. I have also tried placing the router on a completely different place, to make sure there was absolutely no interference (tough that shouldn't be an issue if my laptop is only 3 inches away) I tried changing the security mode to something different than WPA2/AES.
Nothing worked, if anything, it made it worse in some cases. I have litteraly tried every option I could find online, except for trying a third party firmware like DDWRT, which worked excellently for my old WRT54G, though I read that speeds can't be improved on this E2000 with a third party firmware.
Is there anything else I can do, or should I assume that my router is defective?
When I'm in my bedroom, I get a very poor connection and my speed drops to about 0.25mbps. Abysmal, so I bought a WiFi range extender to get me a better signal. It works, and it allows me to get a speed of about 5-6 mbps, without dropped connections. Still slow, but at least it works. The weird thing is, wired through my router or modem, I get about 9mbps upload speed. With this extender, I get the same 9mbps upload speed in my bedroom, though only 5-6 mbps download speed. You'd think that the upload speed would drop simultaneously with the download speed. How can my upload speed be higher (maxing out) than my download speed? I wonder if my transmitting antenna of my router isn't defective.
Linksys Wireless Router :: WRT54G Can't Handle High Internet Speed
Apr 16, 2013I have the WRT54G v2.2 router. I have Comcast internet service. Comcast has just increased their internet download speed to 50Mbps. With a wired computer (not wireless), connected directly to the router, the fastest internet download speed I get is 30Mbps. When I called Comcast's technical support, they are telling me I need a new router as the older routers can't handle these high internet speeds.
View 2 Replies View RelatedCisco WAN :: 1841 / High Speed WAN Interface Card (HWIC) Supported Features?
Jun 5, 2011my office is looking in ordering a HWIC-1FE to supply our cisco 1841 router with a second ISP connection. i wanted to find out if this card support load balancing and fail over? not sure if fail over is the right terminology so ill explain, i need it so that if one ISP connection goes down (as it does often) it fails over to the second ISP.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 Version 1 - Terminate PPPoE On Really High Speed Connection
Jan 17, 2013Used an E4200 version 1 to terminate PPPoE on a really high speed connection? By that I'm talking say 400Mb or higher.
View 9 Replies View RelatedWRT54gs2 - Using DNS And DHCP From Campus?
Feb 20, 2011So instead of using 192.168.* how can I have computers on my router use my school's 152.65.*? It'd be nice for sharing things around the place. I'm just not sure a WRT54gs2 can do this as I'm not sure its software allows for such routing capabilities.
I sort of know how one would theoretically do this (I'm currently taking a networking class at school) but can I do this with a WRT-54gs2?
Find A Machine By Hostname In Campus LAN?
Dec 12, 2011I manage the network of a small (120 users) network spread out over 5 sites within a 10 mile radius (for normal ops- extended ops can expand to include other cities).I think I'd call that a Campus LAN, perhaps it's just a really small MAN (for normal ops)...I am starting my CCENT/CCNA track so this may be blazingly obvious to some of you- but I'm sure to learn something either way...Every now and again we have to go find "hostname "X"" for an update that won't roll out by way of our (Server Sr SysAdmin's) tools, so we actually have to put hands on it. Unfortunately the prior admins didn't document the inventory to such a level that we know "laptop_015" is in the building down by the college.
I DO have documentation on my equipment (I'm the Network Sr SysAdmin) that I have rolled together over the last 9 months being here...I have a Cisco 5520 ASA, and use ASDM to manage it. What would be extremely handy would be the ability to put a query in the system to report back what switch a given hostname is plugged intoBetter yet, if it could tell me switch and switchport.I imagine this would be simple if I had the MAC address- there's got to be a way to grep the switches for a given MAC- but not sure if it'll work in a similar fashion for ARP lookups.
Cisco :: LMS 3.2 Access To Campus Manager Only
Jan 1, 2013I am having Cisco LMS 3.2.I want to give an access to some desktop administrators so that they can pull the report of User Tracking in campus manager. Is there any way so that I can restric users to campus manager only?
View 9 Replies View RelatedCisco :: Campus Manager 3.3 Does Not Want To Start
Dec 12, 2011UTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application".
Cisco :: LMS 4.0 Campus Manager Cleaning Of View Map
Feb 19, 2012I have the following drawback was held on autodicovery on a CiscoWorks LMS 4.0 which captured all the IP's of the devices on the network between these found a LAN segment that connects to all devices, when creating this view for the Campus Manager appears a LAN segment and We don´t want to appear there on the views, can you edit the view and delete this segment of the map. or if it is necessary to rediscover again.
View 2 Replies View RelatedNetwork Switch Managed Vs Unmanaged High Network Speeds
Jun 5, 2011I'm looking to connect my 50+ drops I have in my home based business. I transfer large files 5+gigs on a regular basis between the machines. I currently just have some cheap Netgear 8port, gigabyte switch's but when transferring files I max out around 12-15mb/sec. This takes WAY too long to transfer files.
I need a network switch so I can get my speeds up to 60+mb/sec at least. (my seconds job office has this ability)
What would I need to get this kind of speed? All my cabling is CAT6, with CAT6 ends. Would I need a managed switch to get this kind of speed?
I was looking at a couple switches. Cisco Sg 100-24 24-PORT Gigabit Switch $374 or Cheaper option Netgear Prosafe GS724T-300NAS 24 Port Gigabit Smart Switch W/ Rack Mount Kit $199
Or is there something else I could go with in this price range?
Cisco :: LMS 3.2 Device Service Not Getting Reflected Under Campus Manager
Nov 16, 2011this is a device discovery issue with LMS 3.2. The devices added up in Common Services are not getting reflected under Campus Manager and Device Fault Manager. The devices are manually added and are stack switches (2960S-24TS-L).
View 1 Replies View RelatedCisco :: LMS 3.2. Campus Manager (5.2.1) And Devices In Not Managed State
Dec 29, 2010I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 19 devices in Not Managed state.
View 5 Replies View RelatedCisco Switching/Routing :: C6500 / MPLS Campus LAN Virtualization And VSS?
Apr 21, 2010I'm going to start the evaluation of implementing the virtualization of our campus LAN using MPLS.We'll get many inter-VLAN routing domains per VRF on the same LAN infrastructure.The LAN infrastructure is based on C6500 implementing VSS.Do you have experience with this kind of setup?Any known/faced issue that might prevent the setup of MPLS on VSS enabled C6500?
View 4 Replies View RelatedCisco Switching/Routing :: 6500 - Campus OSPF Configuration
Aug 26, 2012I manage a small/medium sized campus network consisting of 4 Cisco 6500 series chassis (each with SUP720's) and a couple hundred Cisco 3550/3560/2960 edge switches. We recently completed a new leg of fiber that will make a completed loop between all of the 6500's .... before I make the pyhsical connection I need to figure out my OSPF entries on each 6500 switch.
View 4 Replies View RelatedCisco :: When Will Campus Manager 5.2.1 Support 2960S Switch Series
Sep 29, 2011When will Campus Manager support the 2960S switch series?
View 2 Replies View RelatedCisco :: WS-C3560-48TS / LMS 3.2.1 - Campus Manager Is Missing Switch?
Feb 14, 2012I have a strange problem with one switch in my LMS 3.2.1 installation.It is a WS-C3560-48TS with IOS 12.2(50)SE3 running. I have nine switches with the same type and IOS running without problems.
I notice the problem because there were no UT data for that switch. In RME and CS it was managed.Checking SNMP and config of the switch, but can't find any issues.Because at this time LMS ran in version 3.2 I installed at first CM 5.2.1 and after that the patches for CSCtd49439 and CSCtg20882.Next step was RME 4.3.1 with a lot of patches for different issues. Then I installed the patch for the internal error of CS (CSCtd07131).And finally I installed LMS 3.2.1 and patch for CSCto46927.Last step was installing the latest device packages. I did this directly from the application because it is much better handling than do a manual download. No the system seems to be fully updated.
I had the hope that CM will now find and manage this one switch. But it is still not available.I can't find the device in the data collection. But I can find it in the "Include Devices From DCR", although I configured to fetch all devices from DCR automatically to CM. To manually include the device is not working, too.
P.S. I used that step-by-step update path because it worked on two other servers very well for me.
Cisco :: 2960 / LMS 3.2 Devices Showing Not Managed By Campus Manager
Sep 28, 2011We are using Campus Manager 5.2 with LMS 3.2. We have 100 devices and all 100 devices has been successfully discovered in Common services in all 100 devices are showing in DCR.When we check in RME we have found all 100 devices over there.
But, in Campus Manager we got only 95 devices. out of 88 WS-C2960G-24TC-L 5 switches are not showing in Campus manager. we have added the same manully ( manually included & Ecluded all 5 devices in Campus manager) and start the data collection, but no result.
After data collection it is showing not managed by Campus Manager when we check ( Show all Included devices option).