So instead of using 192.168.* how can I have computers on my router use my school's 152.65.*? It'd be nice for sharing things around the place. I'm just not sure a WRT54gs2 can do this as I'm not sure its software allows for such routing capabilities.
I sort of know how one would theoretically do this (I'm currently taking a networking class at school) but can I do this with a WRT-54gs2?
I have a linksys WRT54GS2. I forgot my password, so I pushed the little reset button. I reset the router and had to configure it all again. I thought it had it configured, because you can see the router name on the "view networks" page, but it just doesn't connect for some odd reason. What could this reason be? I have my router password protected, and I am sure I typed in the correct password.
View 8 Replies View RelatedI was given the above router but I need set up software?
View 1 Replies View RelatedPlugging in laptop to ethernet 1, no IP obtained. ethernet 2, 3 and 4 give me an IP (192.168.1.100) but I can't ping the linkys. Holding the reset button has not done anything. I can connect and manage the Linksys wirelessly. I've tried re-flashing firmware and resetting factory defaults. Ethernet 1 LED is always on connected or not. The other three light when connected.
View 4 Replies View RelatedI'm trying to take off the strict nat restriction.
View 1 Replies View RelatedI just moved in with my friend and i'm having trouble connecting to wireless router linksys WRT54GS2 V1. My roommate can connect his laptop and desktop to the router wirelessly, but my iphone and laptop can't connect. I've tried both of my devices on a wireless network at a friend's house, and both worked fine. We even changed AND removed the password and it doesn't let me log on the internet.
View 5 Replies View RelatedMy router randomly stopped working after I bumped into the wire. It still shows up as a network you can connect to, but whenever I try to connect, it keeps saying there is a problem with my connection. I tried using a different internet cord, but nothing changes. I even tried to reinstall my router and still no dice.
View 6 Replies View RelatedI've just recently started to get this error, and I'm not sure why (I have no expierence with routers whatsoever). I have noticed, that whenever this happens though, that my NAT type for my xbox goes strict.
View 4 Replies View Relatedhow to change the password for my wifi.
View 1 Replies View RelatedI have a Linksys model WRT54GS2 with 4 ports, with Ethernet cables connected to ports 1 and 2. I have a laptop connected by wireless connection, with only an Xbox connected using Port 1 and occasionally port 2. Just recently, port 1 shows no activity. When connected to Xbox it doesn't display a check mark showing connection but does with port 2. I've connected it to port 3 and 4, which shows a check mark but won't connect to Xbox live. It's like port 2 only works, what I can do to "fix" ports 1, 3, and 4?
View 1 Replies View RelatedWhat ways can i connect the two building networks together(i.e best tools to use) supposing each building has a router. How will i make computer no. 10 accessible by all computers in the network.
View 1 Replies View RelatedI manage the network of a small (120 users) network spread out over 5 sites within a 10 mile radius (for normal ops- extended ops can expand to include other cities).I think I'd call that a Campus LAN, perhaps it's just a really small MAN (for normal ops)...I am starting my CCENT/CCNA track so this may be blazingly obvious to some of you- but I'm sure to learn something either way...Every now and again we have to go find "hostname "X"" for an update that won't roll out by way of our (Server Sr SysAdmin's) tools, so we actually have to put hands on it. Unfortunately the prior admins didn't document the inventory to such a level that we know "laptop_015" is in the building down by the college.
I DO have documentation on my equipment (I'm the Network Sr SysAdmin) that I have rolled together over the last 9 months being here...I have a Cisco 5520 ASA, and use ASDM to manage it. What would be extremely handy would be the ability to put a query in the system to report back what switch a given hostname is plugged intoBetter yet, if it could tell me switch and switchport.I imagine this would be simple if I had the MAC address- there's got to be a way to grep the switches for a given MAC- but not sure if it'll work in a similar fashion for ARP lookups.
I am having Cisco LMS 3.2.I want to give an access to some desktop administrators so that they can pull the report of User Tracking in campus manager. Is there any way so that I can restric users to campus manager only?
View 9 Replies View RelatedUTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application".
I've been having trouble with my wrt54gs2 and 4 360's. I tried a link someone posted for me to a cisco tutorial, it worked, but only for one 360. I have a Netgear wndr3400, I HATE the wireless on that router. Its unreliable but I like the features, the guest network and transfer meter, plus its worked with 4 360's out of the box. So would it be possible to turn off my wifi on the Netgear and plug the wrt54gs2 in and use its wireless?
View 7 Replies View RelatedSo I have been having internet problems lately and first thought it was my modem. Figured out it wasn't the modem but the isp.After I woke up the next morning I found the wireless not to we working again but the hard connection to be just fine. I have tried resetting the router but I'm not entirely sure I went through. The orange light no longer comes on. Wired connection also doesn't work while connected to the router. I have tried 192.168.1.1 and nothing loads. The router and modem are about 5 or 6 years old. A windows xp desktop, windows 7 and vista laptops are on the network with a blue ray player.the router is a wrt54gs2 v7
I think i have to reconfigure the router but I'm not sure. If that's the case why am i having trouble with 192.168.1.1?
I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit).I have been using this router for 3 months. I was able to use the internet on both devices simultaneously until now. But suddenly since yesterday it only works for one device at a time, not both.
If I connect to the router then I can access the internet only from the laptop. To use the internet from the PC, I have to power off the router, type in run "netsh int ip reset resetlog.txt", and restart the PC. But as the router is off, the internet is inaccessible on the laptop.
While router is on, the PC shows limited or no connectivity.
I tried reseting the router 2-3 times.
On the laptop it sometimes shows "IP address conflict has been detected", even though the IP addresses of the devices were not the same. The IP address of the PC shows 169.X.X.X (when the router is on), whereas the ISP's IP addresses start with 124.X.X.X.
I have a task to compare different approaches to implement InterVLAN routing in campus network. Google suggests only Cisco technologies for such query. But what I need is also other companies solutions (like Dell, HP etc), cost of the implementations, pros and cons.
View 1 Replies View RelatedI have the following drawback was held on autodicovery on a CiscoWorks LMS 4.0 which captured all the IP's of the devices on the network between these found a LAN segment that connects to all devices, when creating this view for the Campus Manager appears a LAN segment and We don´t want to appear there on the views, can you edit the view and delete this segment of the map. or if it is necessary to rediscover again.
View 2 Replies View RelatedI have 5 Static Ip pool all IPs are working fine. I have deploy a IIS Server on Windows2008 and configure the Static IP on that server. earlier it was working fine . but since last month the IP is not pinging from Out Side but internal IP Pool its working. I have checked the SERver firewall and another Setting is Ok. if i changed the Ip from the server the new IP is also not pinging.
View 1 Replies View RelatedHow to setup a WIFI Network in a large campus building.
View 5 Replies View Relatedthis is a device discovery issue with LMS 3.2. The devices added up in Common Services are not getting reflected under Campus Manager and Device Fault Manager. The devices are manually added and are stack switches (2960S-24TS-L).
View 1 Replies View RelatedI have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 19 devices in Not Managed state.
View 5 Replies View RelatedI'm going to start the evaluation of implementing the virtualization of our campus LAN using MPLS.We'll get many inter-VLAN routing domains per VRF on the same LAN infrastructure.The LAN infrastructure is based on C6500 implementing VSS.Do you have experience with this kind of setup?Any known/faced issue that might prevent the setup of MPLS on VSS enabled C6500?
View 4 Replies View RelatedI manage a small/medium sized campus network consisting of 4 Cisco 6500 series chassis (each with SUP720's) and a couple hundred Cisco 3550/3560/2960 edge switches. We recently completed a new leg of fiber that will make a completed loop between all of the 6500's .... before I make the pyhsical connection I need to figure out my OSPF entries on each 6500 switch.
View 4 Replies View RelatedIn regards to a WAN connection, how would you recommend we connect a leased campus to our existing network. It is a temporary location that must be connected for a year.
We have an available 3845 with a VWIC2-2MFT-T1/E1 card. We are supposed to be getting 2-T1 lines from Verizon. I have a spare 3750 L3 switch for the core and 6 access switches.
When will Campus Manager support the 2960S switch series?
View 2 Replies View RelatedI have a strange problem with one switch in my LMS 3.2.1 installation.It is a WS-C3560-48TS with IOS 12.2(50)SE3 running. I have nine switches with the same type and IOS running without problems.
I notice the problem because there were no UT data for that switch. In RME and CS it was managed.Checking SNMP and config of the switch, but can't find any issues.Because at this time LMS ran in version 3.2 I installed at first CM 5.2.1 and after that the patches for CSCtd49439 and CSCtg20882.Next step was RME 4.3.1 with a lot of patches for different issues. Then I installed the patch for the internal error of CS (CSCtd07131).And finally I installed LMS 3.2.1 and patch for CSCto46927.Last step was installing the latest device packages. I did this directly from the application because it is much better handling than do a manual download. No the system seems to be fully updated.
I had the hope that CM will now find and manage this one switch. But it is still not available.I can't find the device in the data collection. But I can find it in the "Include Devices From DCR", although I configured to fetch all devices from DCR automatically to CM. To manually include the device is not working, too.
P.S. I used that step-by-step update path because it worked on two other servers very well for me.
We are using Campus Manager 5.2 with LMS 3.2. We have 100 devices and all 100 devices has been successfully discovered in Common services in all 100 devices are showing in DCR.When we check in RME we have found all 100 devices over there.
But, in Campus Manager we got only 95 devices. out of 88 WS-C2960G-24TC-L 5 switches are not showing in Campus manager. we have added the same manully ( manually included & Ecluded all 5 devices in Campus manager) and start the data collection, but no result.
After data collection it is showing not managed by Campus Manager when we check ( Show all Included devices option).
I`m working on Dynamic Vlan Assigmenton the basis of end user authenticatedwhoc are part of specific AD Group in c ampus enviorment.Objective: Need to assign the vlan on switch port on the basis of authenticated users OU Group in Active Directory. Eg: There are 2 OU groups in AD, Sales and Administration. Authenticated user in Sales group should get Vlan 10 and user in Admininstration Group shoudl get Vlan 20.
Components:
Cisco 3750x/Cisco 4500
ACS Version 5.2
Microsoft AD
I have some DHCP trouble since I subnetted my network with a 2921. My clinets are in 172.16.2.0/23 and DHCP servers are in 172.16.5.0/24.Sometimes, randomly I guess, I get NACK from my DHCP server, and if I look into DHCP logs I got something like this:
15,11/09/12,09:52:27,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:28,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:29,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
[code]....
Have a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
I have a Cisco ASA 5500 as the main router with a DIR-655 as a wireless access point behind it. DHCP is turned off on the 655 as the ASA is providing DHCP. This worked great for about a year and now suddenly, without any changes, I'm having problems. The only thing that connects without a problem is a laptop, which shows up on the device list with an IP. Other devices have problems. iPhones connect, show an IP on the device itself, but when listed in the connected list on the 655 show no IP. The connection is super slow. An Airport Express will connect, but again, shows no IP in the connected list on the 655. Using the ethernet cable from the Airport Express, nothing can get an IP. I can live with the iPhone not connecting, but the Airport Express not connecting is a major problem. Any reason why this would just stop working one day?
View 2 Replies View Related