I have a linksys WRT54GS2. I forgot my password, so I pushed the little reset button. I reset the router and had to configure it all again. I thought it had it configured, because you can see the router name on the "view networks" page, but it just doesn't connect for some odd reason. What could this reason be? I have my router password protected, and I am sure I typed in the correct password.
View 8 RepliesI was given the above router but I need set up software?
View 1 Replies View RelatedPlugging in laptop to ethernet 1, no IP obtained. ethernet 2, 3 and 4 give me an IP (192.168.1.100) but I can't ping the linkys. Holding the reset button has not done anything. I can connect and manage the Linksys wirelessly. I've tried re-flashing firmware and resetting factory defaults. Ethernet 1 LED is always on connected or not. The other three light when connected.
View 4 Replies View RelatedI'm trying to take off the strict nat restriction.
View 1 Replies View RelatedHow would one go about setting up a camera in a workplace which was viewable via a website?
View 1 Replies View RelatedI have a Cisco 877W router that has been running flawlessly for nearly 2 years. During that time I've never had to manually reset the router, it has been more reliable than my ISP.However one month ago I left my business for a week and came back to find that the WLAN was no longer visible from my laptop. I searched google, tech forums, and these forums for conclusive explanations as to what is happening but found nothing.The main issue is an inability to see the network, old wireless devices that have been using the WLAN for a while have no trouble viewing the network or connecting to it.How ever, any time a new device is brought in (Samsung Galaxy Tab, new Laptops, and new Desktops) the WLAN is not available.I was able to make the device visible to my laptop by changing the country code on my network device to Region 1, but this is not an option for all devices or configurations.
I have changed the broadcast channels, shutting down the WLAN, configuring WLAN differently (through several different Security methods).My separate access points are usually visible by all clients, (I use D-LINK wifi routers configured to AP mode throughout my facility) however the Cisco just doesn't like to be seen?
I just moved in with my friend and i'm having trouble connecting to wireless router linksys WRT54GS2 V1. My roommate can connect his laptop and desktop to the router wirelessly, but my iphone and laptop can't connect. I've tried both of my devices on a wireless network at a friend's house, and both worked fine. We even changed AND removed the password and it doesn't let me log on the internet.
View 5 Replies View RelatedMy router randomly stopped working after I bumped into the wire. It still shows up as a network you can connect to, but whenever I try to connect, it keeps saying there is a problem with my connection. I tried using a different internet cord, but nothing changes. I even tried to reinstall my router and still no dice.
View 6 Replies View RelatedI've just recently started to get this error, and I'm not sure why (I have no expierence with routers whatsoever). I have noticed, that whenever this happens though, that my NAT type for my xbox goes strict.
View 4 Replies View Relatedhow to change the password for my wifi.
View 1 Replies View RelatedI have a Linksys model WRT54GS2 with 4 ports, with Ethernet cables connected to ports 1 and 2. I have a laptop connected by wireless connection, with only an Xbox connected using Port 1 and occasionally port 2. Just recently, port 1 shows no activity. When connected to Xbox it doesn't display a check mark showing connection but does with port 2. I've connected it to port 3 and 4, which shows a check mark but won't connect to Xbox live. It's like port 2 only works, what I can do to "fix" ports 1, 3, and 4?
View 1 Replies View RelatedI've been having trouble with my wrt54gs2 and 4 360's. I tried a link someone posted for me to a cisco tutorial, it worked, but only for one 360. I have a Netgear wndr3400, I HATE the wireless on that router. Its unreliable but I like the features, the guest network and transfer meter, plus its worked with 4 360's out of the box. So would it be possible to turn off my wifi on the Netgear and plug the wrt54gs2 in and use its wireless?
View 7 Replies View RelatedSo I have been having internet problems lately and first thought it was my modem. Figured out it wasn't the modem but the isp.After I woke up the next morning I found the wireless not to we working again but the hard connection to be just fine. I have tried resetting the router but I'm not entirely sure I went through. The orange light no longer comes on. Wired connection also doesn't work while connected to the router. I have tried 192.168.1.1 and nothing loads. The router and modem are about 5 or 6 years old. A windows xp desktop, windows 7 and vista laptops are on the network with a blue ray player.the router is a wrt54gs2 v7
I think i have to reconfigure the router but I'm not sure. If that's the case why am i having trouble with 192.168.1.1?
I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit).I have been using this router for 3 months. I was able to use the internet on both devices simultaneously until now. But suddenly since yesterday it only works for one device at a time, not both.
If I connect to the router then I can access the internet only from the laptop. To use the internet from the PC, I have to power off the router, type in run "netsh int ip reset resetlog.txt", and restart the PC. But as the router is off, the internet is inaccessible on the laptop.
While router is on, the PC shows limited or no connectivity.
I tried reseting the router 2-3 times.
On the laptop it sometimes shows "IP address conflict has been detected", even though the IP addresses of the devices were not the same. The IP address of the PC shows 169.X.X.X (when the router is on), whereas the ISP's IP addresses start with 124.X.X.X.
So instead of using 192.168.* how can I have computers on my router use my school's 152.65.*? It'd be nice for sharing things around the place. I'm just not sure a WRT54gs2 can do this as I'm not sure its software allows for such routing capabilities.
I sort of know how one would theoretically do this (I'm currently taking a networking class at school) but can I do this with a WRT-54gs2?
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies View RelatedWhy there is no parental control feature built in for WAP610N... how do i block website on all computers connected to my router?
View 4 Replies View RelatedWe have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies View RelatedIs the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
View 1 Replies View RelatedThe router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's
FW_E1000_2.1.02.006_US_20130115.bin
Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19?2.168.1.2 and TFTP'd the firmware over to 192.168.1.1 - no errors reported and 192.168.1.1 is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
Can you use your WRT54G router with the newer WRT310N router to extend your wireless signal? How?
View 7 Replies View RelatedThe standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement). I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity.
View 1 Replies View RelatedI just got E1000 cisco wireless router. Started setup, everything worked fine and replaced admin password with my own. For some reason got error message. tried to redo setup and got message router not recognized. used laptop and found out that wireless works fine. After few days noticed that there is a (mynetworkname) guest connection you can connect without any password. i don't need that stupid thing and my question is how to disable guest network? I cannot reach Main Menu from cd and have no idea where to look for it when i connect to router by web.
View 9 Replies View RelatedI I use a Linksys E3000 router. Sometimes when I look at the network map I see a device called "Unknown." It appears as though the two notebooks sometime are going through this device to access the Linksys E3000. (I've checked when both notebooks are on and I can determine what devices are connecting directly to the router and what devices are going through this unknown device.) Is there any way to determine what this unknown device is?
View 5 Replies View RelatedBEFSR81 v3.0.I selecting Enabled UPnP and now I cannot access the router. When I enter the default admin for the password in the Authentication Required screen. I get the following screen: 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required.I didn't enter anything new into the username or password fields.
View 5 Replies View RelatedI currently have my wired cable internet hooked into my wrt310n. I have that hooked into a linksys 10/100 ef3124 switch. From there, I have cat5 run to the back of my house, where the wireless signal is weakest. I've got an E2000 router and would like to hook that in at the back of the house. What settings do I need to make in order to set up a completely new wireless network in the back of the house?
View 1 Replies View RelatedMy main Internet connection is a frontier modem /router It is on the main level of the house. In the basement I am trying to set up the cisco E3000 through an Ethernet cable.
View 4 Replies View RelatedI have a Thomson TG585 v7 router which is in bridge mode. I also have a NetGear DGND3300v2 router which I would like to connect to the Thomson (eventually I will purchase a switch and connect another device along with the NetGear). The problem is that the NetGear only has 4 LAN ports and no WAN ports, which I assume you would need to set this up.
View 4 Replies View RelatedI have a Netcomm router which I've had working as my ADSL and my wireless AP.I connected a DLink router via ethernet so as to extend the range of my WIFI.This has worked, but now I cant log in to my DLink router.It started with IP 10.1.1.1After setting it up to not do automatic dhcp and then plugging it in to my Netcomm (which is on 192.168.1) I can no longer find the DLink, whether connected over ethernet or wireless. How it might have had its IP changed as it join the network?
View 14 Replies View RelatedUnable to access router admin page for Haier model R800
View 1 Replies View RelatedI have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
I just reset my router to the factory settings in order to make some changes to it. However, when I tried to change the SSID to a unique name, I was unable to connect my computer to the wireless network. I then reset my security settings and left the SSID to the default name "linksys_SES_54125" and it is working just fine. I tried to connect with two separate computers both running Windows 7. My router is the WRT54G v8
why I wouldn't be able to connect to my wireless network when I change the SSID?